Objectives. Because posterior cruciate ligament (PCL) resection makes flexion gaps wider in total knee replacement (TKR), preserving or sacrificing a PCL affects the gap equivalence; however, there are no criteria for the PCL resection that consider gap situations of each knee. This study aims to investigate gap characteristics of knees and to consider the criteria for PCL resection. Methods. The extension and flexion gaps were measured, first with the PCL preserved and subsequently with the PCL removed (in cases in which posterior substitute components were selected). The PCL preservation or sacrifice was solely determined by the gap measurement results, without considering other functions of the PCL such as ‘roll back.’. Results. Wide variations were observed in the extension and flexion gaps. The flexion gaps were significantly larger than the extension gaps. Cases with 18 mm or more flexion gap and with larger flexion than extension gap were implanted with cruciate retaining component. A posterior substitute component was implanted with the other cases. Conclusions. In order to make adequate gaps, it is important to decide whether to preserve the PCL based on the intra-operative gap measurements made with the PCL intact. Cite this article: Bone Joint Res 2014;3:95–100

To compare posterior cruciate ligament substituting (PCS) total knee arthroplasty (TKA) and posterior cruciate ligament retaining (PCR) total knee arthroplasty (TKA) to determine if greater overall flexion is obtained with the PCS TKA versus the PCR TKA at two year postoperative follow up. Secondarily, to determine whether there is a difference in the recovery of range of motion over time between the two groups from initial presentation, to discharge, and to follow up visits at three months, one year, and two years. Prospective, randomised double-blind clinical trial consisting of one hundred male and female patients scheduled for primary TKA. Sample size allows detection of a difference of six degrees of knee range of motion using two-tailed tests, =0.05, and 0.20 (80% power). SCORPIO PCL substituting total knee system and the SCORPIO PCL retaining total knee system were implanted for evaluation in this study. Patients were assessed at initial presentation, at postoperative discharge from hospital, and at follow up visits at three months, one year and two years for flexion knee range of motion. Additional data were collected utilizing the WOMAC Osteoarthritis Index, the Knee Society Clinical Rating Scale, the SF-36, and the Knee Society Radiographic Evaluation as well as data on length of stay and surgical time. Subjects were similar in demographic characteristics and all measurements at the baseline initial assessment. No differences were seen in knee flexion at two year follow up as measured using an independent t-test (p> 0.05). Recovery of knee range of motion over time was not different as measured using a two way repeated measures ANOVA (p=0.88 for group effect). Postoperative flexion and recovery of kneww range of motion was not altered following TKA by using PCS or PCR prostheses

Purpose: At a time when total knee arthroplasty (TKA) with an ultra-congruent tibial plateau or a mobile plateau are advocated by many, the question is whether TKA with a fixed plateau preserving the posterior cruciate ligament (PCL) should be abandoned. We analysed the results of 500 Wallaby I TKA with preservation of the PCL and presenting asymmetrical and divergent femoral condyles with a fixed, also assymetrical tibial plateau, at mean follow-up of seven years (1–10). Material and methods: This prospective multicentric study was performed by junior and senior surgeons. Mean patient age was 70.11 years and 91.4% of the patients had primary or secondary degenerative disease. Prior surgery had been performed in 130 knees, mainly for osteotomy (n=40, mostly tibial) and revision of uni-compartmental or total prostheses (n=18). The mean preoperative IKS knee score was 26.11 points, the function score was 29.54. Preoperative alignment was correct for 11.26% of the knees, 27.16% presented > 4° valgus and 61.56% > 3° varus. Nearly all tibial and patellar pieces were cemented. 5.8% of the femoral pieces were not cemented. A prosthesis was implanted on the patella in all knees except four. There were two early infections, one popliteal sciatic paralysis and twelve wound healing problems. General mobilisation under general anaesthesia was performed in 53 knees (10.6%). Results: Twenty-two patients were not retained for analysis, fifteen lost to follow-up and seven deceased at one year. Among the 478 knees followed for one to ten years, there were six late infections (1.25%), one aseptic bipolar loosening (0.2%), 25 patellar fractures (5.23%) including three which required revision (two cerclage, one prosthesis removal), three periprosthetic femur fractures without effect on the clinical or radiographic outcome, one traumatic tear of the medial collateral ligament, and two secondary tears of the PCL without clinical consequences. There were no revisions for instability, generally considered the most frequent reason for TKA revision. The mean postoperative IKS score was 90.6 points and the function score was 59.7 points basically due to patient age and comorbidity. The eight-year survival (Kaplan-Meier method) was 98.2% (95%CI: 99.4–96.9) irrespective of the reason for revision and 99.2% (95%CI 100–98.4%) if the revision was performed for a mechanical problem. Radiographically, more than 70% of the knees were aligned (between 3° valgus and 2° varus) and more than 90% were between 5° valgus and 5° varus. Although it was difficult to measure radiographically polyethylene wear, there was only one case of > 2 mm wear with osteolysis found in 50 knees selected randomly among the knees with more than seven years follow-up. Conclusion: This study, like others reported by authors preserving the PCL, show that preservation of the PCL limits the risk of instability, allowing excellent clinical and radiographic outcome without important polyethylene wear, opening perspectives for good long-term results

Poor availability of allografts in South Africa has led to an increased use of synthetic augmentation to stabilize knee joints in the treatment of knee dislocations. This study aims to evaluate multiligament knee injuries treated with a posterior cruciate ligament internal brace. The study included patients with knee dislocations who were treated with a PCL internal brace. The internal brace involved the insertion of a synthetic suture tape, which was drilled into the femoral and tibial footprint. Chronic injuries were excluded. Patient-reported outcome scores (PROMs), range of motion, stress X-Rays, and MRI scans were reviewed to assess outcomes. Acceptable outcomes were defined as a Lysholm score of 84 or more, with grade II laxity in no more than one ligament and a range of motion from full extension to 90° or more. The study included eight patients, with a median age of 42, of which five were female. None of the patients had knee flexion less than 90° or an extension deficit of more than 20°. PROMs indicated acceptable outcomes (EQ5D, Tegner Lysholm). Stress radiographs showed less than 7mm (Grade I) of posterior translation laxity in all patients. Four patients underwent MRI scans 1–2 years after the initial surgery, which revealed healing of the PCL in all patients. However, increased signal in a continuous ligament suggested only partial healing in two patients. Tunnel widening of 200% and 250% was noted around the tibial and femoral PCL footprints, respectively. All patients demonstrated stable knees and acceptable PROMs. Tunnel widening was observed in all patients who had MRI scans. Factors such as suspensory fixation, anisometric tunnel position, and the absence of PCL tear repair may have contributed to the tunnel widening

Background:. For the past four decades controversy surrounds the decision to retain or sacrifice the posterior cruciate ligament during a total knee arthroplasty. To our knowledge no study has been done to describe the effect of releasing the PCL on the range of motion of the knee. Study design:. Case series. Methods:. Computer navigation data (Brainlab) was obtained intra-operatively from thirty patients at total knee arthroplasty. Coronal alignment, maximal passive knee extension and maximal passive flexion was captured before and after release of the PCL. Results:. Releasing the posterior cruciate ligament led to an increase in maximal extension in all patients (av 3,6°) and a decrease in coronal deformity in 63%. The surprising finding was an increase in maximal knee flexion (av 5°, range 0 to 10°.) The increase in maximal flexion was statistically significant. Conclusion:. Sacrificing the posterior cruciate ligament alters the kinematics of the knee and the resultant increase in knee flexion might explain why cruciate sacrificing total knee arthroplasty has superior flexion compared to cruciate retaining designs

The issue of preservation or sacrifice of the posterior cruciate ligament in total knee arthroplasty remains unresolved. We report the results of 200 consecutive total knee arthroplasties performed at our hospital under the direction of the senior author. Pre-operatively, patients were randomly chosen to receive either a Kinemax (posterior cruciate retaining) or a Press-Fit-Condylar (posterior cruciate sacrificing) prosthesis. We implanted 97 Kinemax and 103 Press-Fit-Condylar prostheses which were prospectively followed-up by clinical and radiographic assessment. Review at mean follow-up of 2.7 years showed a satisfactory clinical result in both groups [Surace, et al., 1994]. We present the results of our further review, with maximum follow-up of over nine years (mean: 5.9 years). Revision of the implant has been performed in five knees (three Kinemax and two Press-Fit-Condylar). The polythene spacer had to be replaced in one patient with a Press-Fit-Condylar implant. Patients were assessed with the Hospital for Special Surgery Knee Score and radiologically assessed with the Knee Society Roentgenographic Evaluation and Scoring System. Pre-operative demographics and disease states of the patients were similar, with an average Hospital for Special Surgery Knee Score of 63. At the latest assessment the average knee score was good (85). Remarkably, the mean knee score for the posterior cruciate sacrifice and the PCL groups remains similar (mean: 85). Radiographic evaluation demonstrated that the prosthetic components of both groups were in comparable alignment. The posterior cruciate ligament retained (Kinemax) patient group showed a mean 5.9 degrees of the valgus angle at the knee. The angle in the posterior cruciate ligament sacrifice (PFC implant) group was 6.2 degrees. Evaluation of the radiolucent depths below the femoral, tibial and any patella component showed a mean total depth of 1.5 mm (pcl retaining) and 1.7 mm (pcl sacrificing). Our study presents a quantitative perspective of the results of total knee replacement with proven implant systems and performed in a general orthopaedic unit by both consultants and surgeons in training. The Kinemax (Howmedica) and Press-Fit-Condylar (DePuy Johnson and Johnson) implant systems have both previously demonstrated good results and continue to be available with little subsequent modification. To our knowledge, there have been no other large prospectively randomised studies of posterior cruciate ligament preservation or sacrifice in total knee replacement

High-flexion knee replacements have been developed to accommodate a large range of motion (ROM > 120°) after total knee arthroplasty (TKA). Femoral rollback or posterior translation of the femoral condyles during knee flexion is essential to maximise ROM and to avoid bone-implant impingement during deep knee flexion. The posterior cruciate ligament (PCL) has been described as the main contributor to femoral rollback. In posterior-stabilised TKA designs the PCL is substituted by a post-cam mechanism. The main objective of this study was to analyse the mechanical interaction between the PCL and a highflexion cruciate-retaining knee replacement during deep knee flexion. For this purpose, the mechanical performance of the high-flexion cruciate-retaining TKA design was evaluated and compared with two control designs including a highflexion posterior-stabilised design. Materials & Methods: Prosthetic knee kinematics and kinetics were computed using a three-dimensional dynamic finite element (FE) model of the knee joint. The FE knee model consisted of a distal femur, a proximal tibia and fibula, a quadriceps and patella tendon, a non-resurfaced patella, TKA components and a posterior cruciate ligament in case cruciate-retaining designs were evaluated. Tibio-femoral and patello-femoral contact were defined in the FE knee model and the polyethylene insert was modelled as a non-linear elastic-plastic material. Three different rotating platform TKA systems were analysed in this study: the high-flexion cruciate-retaining PFC Sigma CR150, the high-flexion posterior-stabilised PFC Sigma RP-F and the conventional cruciate-retaining PFC Sigma RP (Depuy, J& J, UK). Both the polyethylene stress characteristics and the tibio-femoral contact locations were evaluated during a squatting movement (ROM = 50° – 150°). Results: During deep knee flexion (ROM > 120°), the high-flexion cruciate-retaining TKA design showed a lower peak contact stress (74.7 MPa) than the conventional cruciate-retaining design (96.5 MPa). The posterior-stabilized high-flexion TKA design demonstrated the lowest peak contact stress at the condylar contact interface (54.2 MPa), although the post was loaded higher (77.4 MPa). All three TKA designs produced femoral rollback in the normal flexion range (ROM ≤ 120°), whereas the cruciate-retaining designs showed a paradoxical anterior movement of the femoral condyles during high-flexion. Discussion: PCL retention is a challenging surgical aim and affects the prosthetic knee load and kinematics as shown in this study. In addition, for adequate functioning the PCL should not be too tight or too lax after surgery. Hence, we investigated the effect of PCL laxity on the prosthetic performance and the best-balanced PCL was used in our simulations. Although PCL balancing is not an issue for posterior-stabilized TKA, we found the tibial post to be loaded relatively high for this implant type

Introduction: Much debate exists regarding sparing or sacrificing the posterior cruciate ligament (PCL). The posterior cruciate ligament is said to maintain proprioception and stabilization post knee arthroplasty. Substitution of the PCL can require more femoral bone resection, but is thought to improve range of motion. Release of the PCL can restore extension and enhance flexion through greater femoral rollback. Bicruciate implants potentially offer greater flexion and enhanced stability. Each implant design with mechanical instruments requires a different surgical technique making it difficult to directly compare the patient and surgical outcomes. Computer navigation eliminates the differences in implantation between the various implant designs and theoretically allows a more direct comparison of implants based on design characteristics and not surgical technique. The purpose of this paper is to review four different implant designs implanted by a single surgeon with a computer assisted, gap balancing technique to determine if there was any difference in patient outcome. Methods: A total of 504 implants consisting of posterior cruciate sparing (PFC-RP), PCL substituting (PFC-RPC), PCL sacrificing (LCS) and bicruciate (Journey) implants performed by a single surgeon were reviewed. The PFC-RP group (260) was the largest, followed by the LCS (124), the PFC-RPF (80) and the Journey Knee (40). Outcomes reviewed were range of motion, function, pain and radiographic data to include alignment and evidence of radiolucency. Results: Demographic data of groups compared included 175 men and 329 women. Mean ages ranged from 61 to 74 years. Preoperative scores among all groups were similar with the cruciate substituting group slightly lower in function, flexion and with more pain before surgery. Overall function improved across all groups through two years, with better scores in the Journey and LCS implants (77 and 73 points) versus RPF (47) and PFC retaining group at (68) at one year (A perfect score is 100). Flexion values were comparable between all groups at one and two year intervals with Journey the highest mean flexion (116 degrees) at one year and with the PFC-RP offering the highest mean flexion at the two year mark (115 degrees). The RPF group at the one year mark had more pain overall (28) versus the other three groups (Journey 45, LCS 42, Sigma RP 45). No patients in any group were revised for instability. Other surgical complications were equal in each group. Discussion: While the PCL substituting knee patients (PFC-RPF) had lower pain, function and flexion at 12 months compared to all other groups, they started with lower overall knee scores. After accounting for the differences in patients preoperatively, no difference could be found between implant designs when implanted with a similar surgical technique employing a computer assisted gap balancing protocol

The role of posterior cruciate ligament (PCL) in total knee replacement (TKR) has been a matter of debate for long time and remains controversial. In this study, the effect of posterior cruciate ligament (PCL) sacrifice on the tibiofemoral joint gap was analysed in 30 varus osteoarthritic knees undergoing posterior stabilized total knee replacement. Medial soft tissue was released and bone cut was made without preserving the bone segment of tibial PCL insertion. Then the medial and lateral joint gaps in full extension and 90□& lsaquo; flexion were measured before and after PCL sacrifice using a tensioning device (V-STAT tensor(tm), Zimmer). After PCL sacrifice, the flexion gap significantly increased both in medial and lateral side (4.8 □} 0.4 and 4.5 □} 0.4 mm respectively, mean □} SE) compared to those seen in the extension gap (0.9 □} 0.2 and 0.8 □} 0.2 mm, p < 0.001 ANOVA). There was no significant difference between the changes in the medial and lateral gap (p = 0.493). In conclusion, results of this intraoperative measurement showed that PCL sacrifice leads to a selective increase in the size of flexion gap by an average of 4.7 mm whereas it had little impact on the correction of varus deformity. These findings provided insights as for the role and necessity of PCL sacrifice in the correction of varus and flexion deformity. Because the flexion gap surpassed the unchanged extension gap during PCL sacrifice, PCL release could be used as a surgical technique to balance the gaps without additional bone cut

To investigate the effectiveness of avulsion fracture of tibial insertion of posterior cruciate ligament using the safe postero-medial approach through analyzing the clinical and radiographic outcomes. We treated 14 cases of acute PCL tibial avulsion fracture with “safe postero-medial approach”. The PCL and avulsion bony fragment was fixed with 1 cannuated screw and washer. The patients were assessed clinically and radiographically at 3 months, 6 months, and 12 months. Clinical examination for each visit included assessment of the knee range of motion, using goniometer and the posterior drawer test. The patients were evaluated according to the Lysholm and Tegner rating scales. Patients were followed-up for 12 to 16 months. X-ray showed that satisfactory reducdtion and bony healing was achieved in all cases. There was no neurovascular complication. All patients had negative posterior drawer tests. Excellent outcomes were reported by all patients with the Lysholm score system. And there was no signicant difference between the Tegner scores before injury and last follow-up. Surgical treatment of acute tibial avulsion fracture of the PCL with this approach can restore the stability and fuction of the joint safely in most patients without neurovascular complication. Therefore “safe postero-medial approach” may be suitable for the treatment of isolated tibial avulsion fracture of the PCL

We compared function in two groups of high demand patients who had undergone total knee arthroplasty (TKA), one group using a posterior cruciate sacrificing (PCS) prosthesis and the other a posterior cruciate retaining (PCR) prosthesis of similar design. Patients were eligible for the study if surgery had been performed more than two years ago and they were under 65 years of age and had no coexisting morbidity that markedly decreased their physical activities. One surgeon operated on 28 patients in group A (20 TKAs), routinely retaining the posterior cruciate ligament (PCL). A second surgery operated on 19 patients in group B (25 TKAs) and routinely sacrificed the PCL. A mobile bearing prosthesis of similar design was used in each group. Patients were independently selected and assessed using a questionnaire specifically developed to assess higher levels of activity not usually assessed by other knee scores. Patients in the two groups were matched in terms of age, range of motion and follow-up. The gross activity score was 3.36 in group A and 3.12 in group B. The combined walking, running and stair-climbing score was in group A (7.68) than in group B (6.64). Patients in group B had decreased anterior knee pain and perceived their TKA closer to a normal knee (2.00 compared to 2.32). We conclude that retaining the PCL in TKA results in better patient function without obvious complications

We have assessed the clinical and radiological outcome of traumatic knee injuries resulting in open reconstruction of the posterior cruciate ligament using synthetic ligaments at the University of Toronto, Ontario. Pre and post-operative stress radiographs at 30 and 90 degrees were performed, along with IKDC, Lysholm and Tegner scoring. Between 1995 and 2002, 11 patients were operated on. The average time to surgery was 42.3 months (range 1 to 252 months). The average age at time of surgery was 34.1 (26 – 48). The length of follow up ranged from 6 to 87 months. IKDC scoring showed that no patient returned to normal. 5 were nearly normal, 4 abnormal and 2 severely abnormal. The average Lysholm score was 83 (58 – 95). 2 scored excellent, 6 good, 2 fair and 1 poor. The average Tegner score pre-injury was 6.3, prior to surgery 1.8 and post-operatively 3.9 (twice weekly jogging). Stress radiographs showed a decrease in antero-posterior laxity at 30 and 90 degrees although statistical significance was not achieved (p = 0.229 and 0.474 respectively). We conclude that PCL reconstruction restores the normal biomechanics of the knee allowing a more normal function. The synthetic ligament allowed early weight bearing and range of movement mobilisation. The Tegner scores showed a considerable improvement from pre to post-operative values. The stress radiographs showed a decrease in the antero-posterior laxity. Although the IKDC scores did not show any normal knees post-operatively, this was expected due to the severity of the initial injuries. The authors recommend the use of synthetic ligaments to reconstruct the PCL

Computational modeling has been used to simulate the natural and prosthetic kinematic and kinetic function in an attempt to compare designs and/or predict a desired motion path from a design. The levels of soft tissue can range from basic ligaments (MCL, LCL, and ACL & PCL) to more complex models. The goal of this study was to evaluate the sensitivity of the Posterior Cruciate ligament in a virtual model and its effects on the kinematic outcome in a commercially available and validated kinematics package (KneeSim, LifeModeler San Clemente, CA). Methods:. KneeSIM is a musculoskeletal modeling environment that is built on the foundation of the ADAMS (MSC Software, Santa Ana CA), a rigid body dynamics solver to compute knee kinematics and forces during a deep knee bend. All parameters are customizable and can be altered by the user. Generic three dimensional models of cruciate retaining components of the femoral, tibial, and patellar are available with the software and were used to provide a common reference for the study. The following parameters were modified for each simulation to evaluate the sensitivity of the PCL in the model: 1) Model without PCL, 2) PCL with default properties, 3) PCL Shifted at femoral origin, 7 mm anterior, 7 mm inferior; tibial origin maintained; 4) PCL with increased stiffness properties (2x default), 5) position in the femur and tibia remained default position and 6) PCL with default properties and location, joint line shifted 4 mm superior. The standard output of tracking the flexion facet center (FFC) motion of the medial and lateral condyles was utilized (Figure 1). Results:. Figure 2 and 3 displays the output of the six conditions tested above. Comparing the curves for the medial and lateral motion show different patterns with the lateral point having more posterior translation than the medial. After approximately 95° of flexion, all cases exhibit an anterior translation in the model. This motion was consistent for all test cases. The model showed no difference with motion either with or without the PCL and with changing the stiffness. Altering the location of the PCL on the femoral insertion had the greatest effect on motion, while shifting the joint line superior was second. The shift of the ligament insertion and changing of the joint line results in the ligament being more parallel to the tibial surface which provides resistance to anterior motion or posterior translation. Discussion:. Although the model was able to discern differences, the inability to highlight variation in motion with and without the PCL suggests that the default parameters are not representative of an experimental or clinical setup. Although it is apparent that KneeSim can be used for comparative assessments between designs, simulations should be designed so as to provide similar boundary conditions. Publications (Colwell et al 2011) did successfully use KneeSim to provide a comparative assessment of CR components; however, only after the default model was altered to match the outcome of the experimental rig. Further analysis of the complexities in soft tissue modeling is warranted

Purpose. We conducted a prospective study to investigate the role of the LARS ligament system to reconstruct the posterior cruciate ligament and the postero-lateral corner of the knee. We present a prospective single surgeon case series to evaluate early clinical and functional outcomes of postero-lateral corner and posterior cruciate ligament reconstruction in the knee using the LARS (ligament Augmentation and Reconstruction System) artificial ligament. 23 patients with multi-ligament knee injuries or isolated PCL injuries were treated with a mean follow up of 8 months (range: 2-37 months). Outcomes were assessed using the modified International Knee Documentation Committee score, and a modified Tegner- Lysholm score. 2 patients had acute reconstructive surgery within 7 days of injury, 5 patients within 3 months (semi-acute) and 16 were chronic cases that were operated on after three months from the date of injury. The LARS ligament reconstruction achieved a significant improvement between preoperative and postoperative assessment in relation to knee stability, function and patient satisfaction. The sooner the patients were treated the greater the improvements in functional scores were noted. Most patients achieved a full functional range of movement within six months. We had 2 complications, one superficial wound infection and one stiff knee requiring a manipulation. To date we have had no LARS ligament failures. In the short term the LARS functions well, with high clinical patient satisfaction, no signs of progressive laxity, synovitis or failure. We found no significant difference in functional score post reconstruction between the isolated PCL reconstructions and the multi ligament reconstructions. Our results show no early signs of the problems associated with synthetic grafts used in the past. Such grafts appear to be an attractive alternative to the use of autografts and allografts

Purpose: To introduce modified tibial inlay technique for autogenous bone-patellar tendon-bone (BPTB) posterior cruciate ligament (PCL) reconstruction and evaluate the outcomes of PCL reconstruction by this method. Methods: Fifty patients who underwent autogenous BPTB PCL reconstruction using modified tibial inlay technique were evaluated at average 30.9 months (range 12–52). The outcomes were assessed by stress radiographs, maximal manual test with KT-2000 arthrometer, IKDC grading and OAK knee score. Results: Average side to side difference in push view with Telos stress device decreased from 11.7mm to 3.2mm. Difference in maximal manual test with KT-2000 arthrometer also decreased from 11.5mm to 3.1mm. Final IKDC grading was A in six patients, B in thirty four, C in nine and D in one. Average OAK score improved from 64.3 to 86.4. Conclusion: We consider that the modified tibial inlay technique is a method to reduce technical effort and contribute to satisfactory clinical results in autogenous BPTB PCL reconstruction

Aim: To analyse the posterior and external rotational laxities in single bundle PCL (sPCL) and double bundle PCL reconstruction (dPCL) in a PCL and PLC deficient knee.

Methods: Ten fresh frozen were used. A custom made wooden rig with electromagnetic tracking was used to measured knee kinematics. Each knee was tested with posterior and anterior drawer forces of 80N and an external rotation moment of 5Nm when intact, after PCL resection, after dividing the PLC and after performing dPCL and sPCL reconstructions with a bone patellar tendon bone allograft and tibial inlay technique.

Results: The one-tailed paired Student’s t test with Bon-ferroni correction was used. There was a significant difference between the ability of the dPCL and sPCL reconstruction to correct the posterior drawer in extension (p=0.002). There was no difference between the dPCL reconstruction and the intact condition of the knee near extension (p=0.142, Fig 1). There was no significant difference between the intact condition and both sPCL (p=0.26) and dPCL (p=0.20) reconstructions in flexion in restoring posterior laxity. Neither of the reconstructions could restore the rotational laxity (Fig 3).

Conclusion: In a combined PCL and PLC deficient knee the posterior laxity can be controlled by both the sPCL as well as the dPCL reconstructions except near extension where the dPCL reconstruction was better.

Objective. The aim of this study was to assess the results of combined arthroscopically assisted posterior cruciate ligament reconstruction and open reconstruction of the posterolateral corner in patients with chronic (3 months or more) symptomatic instability and pain. Patients & methods. A retrospective analysis of all the patients who had a combined reconstruction of the posterior cruciate ligament and the posterolateral corner between 1996 and 2003 was carried out. Nineteen patients who had the combined reconstruction were identified from the database. All the patients were assessed pre- and post-operatively by physical examination and three different ligament rating scores. All the patients also had weight bearing radiographs, MRI scans and an examination under anaesthesia and arthroscopy pre-operatively. The PCL reconstruction was performed using an arthroscopically assisted single anterolateral bundle technique and the posterolateral corner structures were reconstructed using an open Larson type of tenodesis. Results. Pre-operatively all the patients had a grade III posterior sag and demonstrated more than 20 degrees of external rotation as compared to the opposite normal knee on the Dial test. The average follow-up was 66.8 months (range 24 -108). Post-operatively 7 patients had no residual posterior sag, 11 patients had a grade I posterior sag and 1 patient had a grade II posterior sag. Five of the 19 patients demonstrated minimal residual posterolateral laxity. The Lysholm score improved from a mean of 41.2 to 76.5 (P=0.0001) and the Tegner score from a mean of 2.6 to 6.4 (p=0.0001). Conclusions. We conclude that while a combined reconstruction of chronic posterior cruciate ligament and posterolateral corner instability does not restore complete anatomical stability, improvement in symptoms and function demonstrate its value in these difficult injuries

Aim: To compare the function in two groups of high demand patients with a total knee arthroplasty (TKA) – one group using a posterior cruciate sacrificing (PCS) prosthesis and the other a posterior cruciate retaining (PCR) prosthesis of similar design. Method: Patients were eligible for the study if they were greater than two years from surgery, less than 65 years of age and without other co-existing morbidity to significantly decrease their physical activities. Group A underwent surgery by one surgeon who routinely retained the posterior cruciate ligament whereas Group B underwent surgery by one surgeon who routinely sacrificed the PCL. A mobile bearing TKA of similar design was used in each group. All patients were selected and assessed by an independent assessor using a questionnaire developed specifically to assess higher levels of activity not usually assessed by other knee scores. Results: Group A (28 TKA in 20 patients) were matched with Group B (25 TKA in 19 patients) for age, length of follow-up and range of motion. The gross activity score was 3.36 in Group A compared with 3.12 in Group B. The combined walking, running and stair climbing score was significantly better in Group A (7.68 compared to 6.64 in Group B). Group B perceived their TKA was closer to a normal knee (2.00 compared to 2.32) with decreased anterior knee pain. Conclusions: Retaining the PCL in TKA results in better function without significant complications

Introduction: The amount of loading on the cruciate ligaments depends on the tension of the external muscular structures. In vivo studies using EMG have observed a proprioreceptive eccentric co-contraction of the hamstrings during isokinetic knee extension motion. This antagonistic co-contraction increases the quadriceps force necessary to produce the same extension moment on the knee, whereas the loading on the anterior cruciate ligament was measured to be reduced, with the loading on the posterior cruciate ligament to be increased. The objective of this study was thus to investigate the effect of simulated proprioreceptive co-contraction of the hamstrings muscles on quadriceps force, as well as on the relative loading on the cruciate ligament structures during knee extension under dynamic conditions and physiologic loads. Methods: Five fresh frozen knee specimen were tested in isokinetic extension. Bow shaped loading transducers were fixed in the medial fibres of the anterior (ACL) and posterior cruciate ligament (PCL). The test cycle simulated an isokinetic extension cycle from 120 degrees of flexion to full extension, a hydraulic cylinder thereby applied sufficient force to the quadriceps tendon in a closed-loop control cycle to produce a constant extension moment of 31 Nm about the knee. A second hydraulic cylinder simulated a 200 N co-contraction force of the hamstrings tendons. The loading on the ACL and PCL was first measured in the absence of hamstrings force, and subsequently under constant co-contractive flexion force. Results: In the absence of hamstring tension, the maximum quadriceps force was 1190 N ( SD 204 N) at 105 degrees of knee flexion. The loading on the ACL was reduced at larger flexion angles, the loading pattern of the PCL showed an inverse relationship with less loading at full extension. The maximum loading in the ACL was 161 N (SD138 N) and maximum tension in the PCL was 38.2 N (SD 34.9). With hamstring co-contraction, maximum quadriceps force increased 19.9 % ( SD 21.0% p= 0.33), maximum tension in the ACL decreased 71.9% (SD 74.3%, p=0.03), and maximum tension in the PCL increased 73.0% (SD 40.9%, p=0.03). Discussion: This experimental setup enabled direct in vitro measurement of ACL and PCL loading during simulated isokinetic extension motions. The loading on the ACL was dependent on the knee flexion angle. We observed that co-contraction of the hamstrings reduces loading on the anterior cruciate ligament without a significant concomitant increasing the quadriceps muscle force. Our results support the hypothesis that antagonistic co-contraction of the hamstrings during extension of the knee provides an important protective function. In contrast, loading in the posterior cruciate ligament increased during hamstring activation at higher knee flexion angles

Introduction. t is accepted dogma in total knee arthroplasty (TKA) that resecting the posterior cruciate ligament (PCL) increases the flexion space by approximately 4mm, which significantly affects intra-operative decisions and surgical techniques. Unfortunately, this doctrine is based on historical cadaveric studies of limited size. This study purpose was to more accurately determine the effect of PCL resection on the tibiofemoral flexion gap dimension in vivo in a large sample. Methods. Tibiofemoral joint space measurements were made during 127 standardized TKAs by two arthroplasty surgeons. A medial parapatellar approach, computer navigation and provisional tibial and femoral bone cuts were performed in all cases with particular attention to preserving PCL integrity. Cases with an incompetent or damaged PCL were excluded. The tibiofemoral gap dimension was measured with a calibrated tension device at full extension, 45-degrees, and 90-degrees before and after complete PCL resection. Results. 52% of patients were female (66/127), with mean age and BMI of 69.4 years and 34.3 kg/m. 2. , respectively. After PCL resection, the mean joint space dimension increased 0.3mm (range, 0–3mm) at extension, 0.9mm (range, 0–4mm) at 45-degrees, and 1.7mm (range, 0–5mm) at 90-degrees (p<0.001). The 90-degree flexion space opened ≤1mm in 48% of patients and ≥3mm in only 10%. Dividing the flexion gap change by the femoral implant dimension to account and calibrate for patient size, the joint space at 90-degrees increased more in females (0.031 vs. 0.023, p=0.022). Conclusion. The tibiofemoral joint space increases progressively from extension, to mid-flexion through 90-degrees flexion after PCL resection, yet is substantially less than reported in historical studies. However, large variation in the degree of flexion space opening was observed with some patients failing to increase their flexion space whatsoever with PCL resection. This runs counter to conventional TKA understanding and should be considered in modern surgical techniques and education. For figures, tables, or references, please contact authors directly