Advertisement for orthosearch.org.uk
Results 1 - 4 of 4
Results per page:
Applied filters
Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 87-B, Issue SUPP_III | Pages 372 - 372
1 Sep 2005
Millington S Tang J Acton S Hurwitz S Crandall J
Full Access

Aim Post-traumatic osteoarthritis and osteochondral injuries can cause significant pain and morbidity. Appropriate MRI sequences combined with image analysis techniques can be used to reproducibly measure quantitative cartilage parameters, hence offering a tool for monitoring and detecting degenerative change earlier than previously possible. We demonstrate the performance of a directional gradient vector flow (dGVF) snake segmentation algorithm on an isotropic MR sequence, which allows segmentation of the full articular surfaces (including malleoli) of the ankle.

Method Eight ankles were imaged using a 1.5T MRI scanner with an isotropic 3D T1 weighted FLASH sequence with water excitation, resolution 0.3 x 0.3 x 0.3 mm. A subset of five ankles were imaged four times with repositioning and re-shimming of the magnet between acquisitions. Images were interpolated to 0.15 mm3 and segmented using a dGVF snake. Following 3D reconstruction of the cartilage layers normal thickness from cartilage to bone was measured at each voxel on the cartilage surface.

Results The mean cartilage thickness (±S.D) was 1.80 mm (±0.05 mm); 1.83 mm (±0.07 mm) and 1.81 mm (±0.07 mm) for the talus, tibia and cumulative ankle cartilage respectively. To measure the technical precision of the segmentation method we determined the coefficient of variation of the four repeated measurements in five ankles. The mean coefficients of variation (min-max) from the repeated measurements were 1.74% (0.69%–3.57%); 1.20% (0.26%–3.06%) and 1.52% (0.26%–3.57%) for the talus, tibia and cumulative ankle cartilage respectively.

Conclusion We believe that the reported isotropic image sequence and segmentation algorithm is a valid tool for quantitative assessment of the entire ankle joint. A possible application is the early detection of cartilage injury and degenerative change due to injury or illness.


Orthopaedic Proceedings
Vol. 87-B, Issue SUPP_III | Pages 373 - 373
1 Sep 2005
Millington S Grabner M Hurwitz SR Crandall J
Full Access

Aim To characterise the mechanical properties of the ankle, it is essential to have accurate joint morphology and measurements of the cartilage thickness and its variation across the joint. Thickness and volume measurements are also useful tools for detecting and monitoring degenerative change, however baseline measurements are required, to act as a ‘gold standard’. We present details of ankle cartilage thickness and distribution over the entire ankle joint, using a high precision stereophotogrammetry system.

Method Twelve cadaveric ankles surfaces with photo targets, rigidly attached, were imaged using a stereo-photographic system, which generates a dense 3D point cloud of co-ordinates on the surface (typically 70,000 points per surface, accuracy ±2 μm). After imaging the surface, the cartilage was dissolved using 5% sodium hypochlorite to reveal the subchondral bone and the process was repeated. The two surfaces were combined and the normal distance from cartilage surface to bone was calculated at every point on the cartilage surface.

Results The mean cumulative cartilage thickness of the ankle joint was 1.18±0.23 mm, the mean maximum cumulative cartilage thickness of the entire ankle joint was 2.17±0.46 mm. When considering the cartilage layers of the talus and the tibia-fibula complex separately, the mean and mean maximum thickness for the talus was 1.17±0.18 mm and 2.12±0.54 mm respectively. For the tibia-fibula complex, the mean and mean maximum thickness was 1.18±0.28 mm and 2.3±0.57 mm respectively. 3D cartilage thickness maps were also produced

Conclusion The cartilage maps show that the thickest cartilage occurs at the shoulders of the talus, as opposed to the talar dome, as reported in earlier studies, which were unable to assess the highly curved regions of the ankle. This method also provides a gold standard for validating MRI cartilage measurements.


Orthopaedic Proceedings
Vol. 85-B, Issue SUPP_II | Pages 176 - 176
1 Feb 2003
Srinivasan S Funk J Crandall J
Full Access

Fracture of the lateral process of the talus (FLPT) is one of the common, yet frequently missed, fractures in snow boarders and can cause severe long-term disability if not treated properly. This fracture has been thought to result from dorsiflexion and inversion combined with axial loading. This assumption is based on injury mechanism reported by patients and anatomical studies and has not been supported by experimental data. We have to understand the mechanism of fracture generation in order to identify potential preventive strategies in equipment design or snowboarding techniques.

In order to understand the pathomechanics of FLPT generation we conducted dynamic impact tests on 19 fresh cadaver lower limbs. A test apparatus was constructed to deliver a pure inversion or eversion moment to the foot and ankle along the centre of rotation of the subtalar joint. An axial load of 2.5 kN was applied to all the legs. The legs were tested in four configurations: inversion with and without dorsiflexion, and eversion with and without dorsiflexion. All the specimens underwent post-test radiographic examination and a necropsy.

Necropsy revealed various injuries including ligamental injuries, malleolar fractures, osteochondral fractures of the talus and joint subluxations. In this study, ten cadaveric leg specimens were subjected to inversion or eversion of an axially loaded and dorsiflexion ankle. Inversion failed to produce any LPT fractures in three injured specimens. However, all six specimens subjected to eversion sustained an LPT fracture. Eversion of an axially loaded and dorsiflexion ankle may be an important injury mechanism for LPT fracture in snowboarders.


Orthopaedic Proceedings
Vol. 84-B, Issue SUPP_I | Pages - 9
1 Mar 2002
McMahon C Funk J Crandall J Tourret L Bass C
Full Access

Axial loading of the foot/ankle complex is an important injury mechanism in vehicular trauma, responsible for severe injuries such as calcaneus, talus and tibial pilon fractures. Axial loading may be applied to the leg externally, by the toepan and/or pedals, as well as internally by active muscle tension applied through the Achilles tendon during pre-impact bracing. In order to evaluate the effect of active muscle tension on the injury-tolerance of the foot/ankle complex, axial impact tests were performed on isolated lower legs, with and without experimentally stimulated muscle tension applied through the Achilles’ tendon. Acoustic emission was used to determine the exact time of fracture during the tests. The primary fracture mode was calcaneal fracture in both groups, but tibial pilon fractures occurred more frequently with the addition of Achilles tension. A linear regression model was developed that describes the expected axial loading injury tolerance of the foot/ankle complex in terms of specimen age, gender, mass and level of Achilles tension.