Advertisement for orthosearch.org.uk
Orthopaedic Proceedings Logo

Receive monthly Table of Contents alerts from Orthopaedic Proceedings

Comprehensive article alerts can be set up and managed through your account settings

View my account settings

Visit Orthopaedic Proceedings at:

Loading...

Loading...

Full Access

O1135 WEAR ASSESSMENT IN POLYETHYLENE CUPS RETRIEVED FROM LOOSE REVISED TOTAL HIP REPLACEMENTS



Abstract

Aims: The reliability of accurately determining wear in polyethylene cups using plain x-rays has been questioned by many authors. In order to explore the accuracy of wear assessment radiologically, we carried out a radiological-retrieval study in 63 patients undergoing revision THR.

Methods:We retrieved 45 intact polyethylene liners from patients after revision THR. The Linear Wear Depth (LWD) in the cups was assessed radiologically measuring the femoral head eccentricity on the plain non-weight bearing x-ray films. The LWD was assessed in the laboratory using the shadowgraph technique. Statistical analysis was performed using the SPSS® software package.

Results: Themean radiological eccentricity of the femoral head was 2.09±2.17 mm (ranging from 0 to 9.50) and the mean LWD 3.52±1.85 mm (ranging from 0.50 to 9.29). The results of Wilcoxon sign ranks test indicated that this 1.43mm-difference is statistically significant (p< 0.001). The measured wear on the plain x-rays was 40,6% less than the true linear wear measured on the retrieved cup.

Conclusions: It is obvious that the radiological eccentricity of the femoral head underestimates the Linear Wear Depth (“true wear”) quite substantially. That difference could be less if the x-rays had been taken weight bearing.

Theses abstracts were prepared by Professor Dr. Frantz Langlais. Correspondence should be addressed to him at EFORT Central Office, Freihofstrasse 22, CH-8700 Küsnacht, Switzerland.