Advertisement for orthosearch.org.uk
Orthopaedic Proceedings Logo

Receive monthly Table of Contents alerts from Orthopaedic Proceedings

Comprehensive article alerts can be set up and managed through your account settings

View my account settings

Visit Orthopaedic Proceedings at:

Loading...

Loading...

Full Access

CLINICO-RADIOLOGICAL AND METAL ION STUDY WITH A LOW CLEARANCE SURFACE REPLACEMENT HIP ARTHROPLASTY



Abstract

Introduction: Systemic metal ion elevation continues to cause concern with metal-on-metal (MM) bearings, particularly in young people, in view of their expected long life-time usage. Reducing bearing clearance is claimed to be a means of reducing metal ion release.

Methods: 26 consecutive male patients (mean age 55 years, mean BMI 26) who fulfilled the inclusion criteria and received a 50mm bearing (diametral clearance 100 μm) were included. Clinico-radiographic review and urine and blood specimens were obtained before and periodically after the procedure. Two hips were excluded during follow-up, (one revision and another contralateral hip arthroplasty). Results were compared with a similar design bearing, 50 or 54 mm diameter and conventional clearance.

Results: At the four-year stage all patients had excellent hip function. However three patients had progressive acetabular radiolucent lines. Cobalt and chromium in both cohorts at all follow-up levels were significantly higher than the preoperative levels. Compared to the conventional clearance (CC) group, the pre-operative urine chromium and 6M to 48M urine cobalt and chromium were significantly lower in the LC group (p < 0.005). Blood metal levels were lower in the LC group at 1-year follow-up but showed a converging trend thereafter. At 4-year follow-up, the differences are considerably less, with no significant difference in blood cobalt (figure).

Discussion: Under ideal conditions, closely matched components (lower clearance) would lead to a thicker fluid film and less wear. However a larger clearance than ideal is needed to allow for asphericities, surface roughness, deformation and the evolution of in vivo lubricant. Peri-acetabular radiolucent lines cause concern. Attempts to reduce systemic metal exposure should not adversely affect other bearing characteristics such as friction. The search for a bearing which would generate low wear without producing a detrimental effect on other bearing attributes, such as friction, should continue.

Correspondence should be addressed to BHS c/o BOA, at the Royal College of Surgeons, 35–43 Lincoln’s Inn Fields, London, WC2A 3PE, England.