Advertisement for orthosearch.org.uk
Orthopaedic Proceedings Logo

Receive monthly Table of Contents alerts from Orthopaedic Proceedings

Comprehensive article alerts can be set up and managed through your account settings

View my account settings

Visit Orthopaedic Proceedings at:

Loading...

Loading...

Full Access

146. A LARGE DIAMETER HEAD METAL-METAL THA RELEASES A SIGNIFICANTLY GREATER AMOUNT OF METAL ION COMPARED TO HIP RESURFACING



Abstract

Purpose: The long term exposure to metal ions released from metal-metal articulations is worrying. Studies have shown comparable ion level between metal-metal HR and 28mmTHA. No study has analyzed the amount of ion released from LDH-THA. We compared the amount of ion released from HR and LDH-THA from the same manufacturer.

Method: Whole-blood concentrations of Cobalt was measured prospectively (pre op, 3, 6, 12, 24 months) with HR-ICPMS in 74 HR and 54 LDH-THA with the same metal bearing characteristics and acetabular component (monoblock Cobalt-Chrome with titanium plasma-spray coating). The femoral head of LDH-THA was inserted on a titanium stem with a Cobalt-Chrome adapter sleeve to adjust offset and leg length.

Results: Demographic data was similar. The pre op Cobalt level (ug/L) were 0.10 vs. 0.11, 3 months 0.90 vs. 0.84, 6 months 0.90 vs. 1.28, 12 months 0.68 vs.1.75, and 24 months 0.56 (5.6X preop level) vs. 1.82 (16.5X preop level) in the HR and LDH-THA groups, respectively. The cobalt level decreased after 6 months in HR, whereas it was still increasing at 2y with LDH-THA.

Conclusion: In order to reduce wear and ion release from metal-metal bearing, most manufacturers focus research on improvements at the bearing surfaces. This study has shown that the simple addition of a sleeve with 2 modular junctions can results in a dramatic increase in ion release, diminishing the value of improvements made at the bearing surface. The total amount of ion released from a metal-metal implant should be considered globally and as such, better modular taper designs should be developed.

Correspondence should be addressed to CEO Doug C. Thomson. Email: doug@canorth.org