Introduction. The condition of the soft tissues surrounding an ankle fracture influences timing and treatment of injuries. Conventional treatment used an open approach to facilitate anatomical reduction and rigid internal fixation. Intramedullary devices for fibular fractures provide a safe alternative in patients in which the condition of the soft tissue envelope or the patient's co-morbidities may benefit from a less invasive approach. We compared outcomes for patients treated with open reduction internal fixation (ORIF) with those undergoing treatment with fibular nails (FN). Methods. 13 consecutive patients treated with fibular nails (FN) were compared with 13 age-matched patients that underwent open reduction and internal fixation (ORIF). All patients were followed to union. Study outcomes were time from admission to surgery, length of stay, wound failure, implant failure, revision surgery, OMAS and SF-36. Results. There was no difference in age or sex distribution between groups. There was no difference in OMAS at 1 year (83 ± 9 in FN group; 80± 21 in ORIF group) and SF-36 (94 ± 11 and 90 ± 20). There were 2 implant failures in the ORIF group and none in the FN group. There was one wound failure in the ORIF group and none in the FN group. Patients treated with FN had a shorter time to surgery (1 day ± 24 hours vs 3 days ± 24 hours) and shorter length of stay (1 day ± 24 hours vs 4 days ± 96 hours). Conclusion. FN is a safe method to treat patients with displaced distal fibular fractures that may have a poor soft tissue envelope and risk factors for wound healing. FN reduces the time to surgery and overall length of stay compared with similar patients treated with conventional ORIF

Bone shape variability within a specific population has been seldom investigated and used to optimize implant design. There is insufficient anatomical fitting of the existing prebend periarticular plates for the distal fibula. We developed a methodology for design of orthopaedic implants that fit a maximum percentage of the target population, both in terms of geometry and biomechanical stability. In co-operation with an implant manufacturer and different academic institutions, a virtual bone database has been developed that contains anatomical data of more than 1000 CT datasets with the implemented possibility to generate idealized implant fits for different anatomical sites. This program (Stryker Virtual Bone Database (VBD) is able to generate statistical anatomical shapes for different populations like age groups or ethnical groups. Based on this, an implant for the distal fibula has been developed (VariAx Distal Lateral Fibula Locking Plate) for distal fibula fracture treatment. Aim of this study was to develop and validate an implant that is optimized for the specific anatomical area. It should be precontoured and still fit to the majority of patients sustaining a distal fibular fracture. Another objective was to create a distally tapered design as there is less soft tissue cover in that anatomic area. Materials & Methods. ProE CAD system was used in combination with the Bone Database (VBDB) to evaluate the bone shape of the target population plate shape. Several bones (from CT scans) have been used in a first validation process in comparison with an implant already available on the market (SPS Fibula Plate). Additionally, the results have been verified with a bone fitting study which was conducted in collaboration with the Maurice E. Müller Institute (MEM) in Bern/Switzerland. In a second step, the finished implant design was validated against statistical bone shapes of populations of different ethical origin. Results. The comparison of the new Plate's shape with real bone data confirmed that the neutral form does cope with the anatomic situation laterally which means that no systematic pre-bending of the plate is required. Comparing with a conventional implant, the new implant could have been implanted unbend in 6 of 7 cases of virtual matching with real patient datasets compared to none with the conventional implant. The validation of statistical datasets of different ethnical origin (Caucasian, Asian) showed no statistical difference of implant mismatch. Conclusion. Based on these results, the new Plate can be considered an efficient solution to treat distal fibula fractures without or only limited time consuming intra-operative bending. Although technically now possible, different plate designs for Caucasians and Asians are not required

Purpose of the study: Covering cutaneous tissue loss of the distal quarter of the leg and ankle remains a difficult surgical challenge. We report our experience with a new lateral hemisoleus island flap with a fibular pedicle specifically adapted for large-sized defects.

Material and method: Preliminary anatomic work on 15 injected legs demonstrated that:

the dimensions of the muscular part of the lateral head of the soleus measures on average 218 mm (range 160–270) in length and 73 mm (range 58–95) in width, sufficient for large “tailored” flaps;

Results: Three patients treated with success are presented. The advantages of the technique are large muscle volume, safe vascular supply and significant mobility. Drawbacks include sacrifice of the fibular artery and difficult dissection of the fibular pedicle. Preoperative precautions are indispensable: arteriography, exclusion of contusion cases affecting the muscle masses or compartment syndrome.

Discussion: The lateral hemi-soleus flap can be a useful therapeutic option for major tissue loss on the distal quarter of the leg, the ankle, or even the foot. It is an attractive alternative to free flaps, the only other solution for large defects.

Survivors of meningococcal septicaemia often develop progressive skeletal deformity secondary to physeal damage at multiple sites, particularly in the lower limb. Distal tibial physeal arrest typically occurs with sparing of the distal fibular physis leading to a rapidly progressive varus ankle deformity. There is no previous literature reporting this ankle deformity following meningococcal septicaemia. We report the management of this deformity in 13 ankles in 10 consecutive patients 36 months after meningococcal septicaemia. Plain radiographs and MRI were used to define the deformity and the extent of growth plate involvement. The Taylor Spatial Frame (TSF) with a distal tibial metaphyseal osteotomy was used to restore the distal tibio-fibular joint. Distal fibular epiphysiodesis was performed in all ankles at the initial procedure. Distal tibial epiphysiodesis was performed at the time of fixator removal. The age at operation ranged from 3–14 years (mean 8). The preoperative ankle varus deformity ranged from 9–29 degrees (mean 19). The differential shortening of the tibia with respect to fibula was on average 1.2 cms. The mean time in frame was 136 days. After a mean follow-up of 1.7 years results were excellent in all patients with complete correction of deformity and shortening. Mechanincal axis was corrected in all patients. Complications included, 4 superficial pin site infections, 1 lateral peroneal nerve palsy which recovered completely. There were no major nerve or vascular complications. We consider that this approach provides a powerful method of correction for this difficult group of patients

Survivors of infantile meningococcal septicaemia often develop progressive skeletal deformity as a consequence of physeal damage at multiple sites, particularly in the lower limb. Distal tibial physeal arrest typically occurs with sparing of the distal fibular physis leading to a rapidly progressive varus deformity. Isolated case reports include this deformity, but to our knowledge there is no previous literature that specifically reports the development of this deformity and potential treatment options. We report our experience of 6 patients (7ankles) with this deformity, managed with corrective osteotomy using a programmable circular fixator

Introduction:. Fibular malreduction is a common and important cause of pain after surgical fixation following a syndesmosis injury, but it is unclear which components of malreduction correspond to clinical outcome. Plain radiographs have been shown to be unreliable at measuring malreduction when compared to CT scans. A number of published methods for measuring fibular position rely on finding the axis of the fibula. Elgafy demonstrated that fibular morphology varies greatly, and some studies have demonstrated difficulty finding the fibular axis. Methods:. We developed a new method of measuring the distal fibular position on CT images. We used CT studies in 16 normal subjects. Two assessors independently measured the ankle syndesmosis using the Davidovitch method, and our new protocol for fibular AP position, diastasis and fibular length. Results:. We demonstrated that after statistical analysis (Pearson Product Moment Correlation) our method showed improved inter-observer reliability (r = 0.99 and 0.95 vs 0.59 and 0.78 respectively) for diastasis and AP translation, and improved intra-observer reliability (r = 0.99 and 0.99 vs 0.91 and 0.97 respectively). We found inter and intra observer reliability of 0.80 and 0.91 respectively for fibular length, but were unable to find a novel, accurate method for measuring fibular rotation. Conclusions:. Our method is a new, simple, accurate and reproducible system for measuring the ankle syndesmosis. We believe that this method could be used to assess fibular reduction after obtaining CT images of the uninjured side for comparison

Assessment of stability in ankle fractures is key in deciding the most appropriate mode of treatment. Stress radiographs have been suggested as a potential method for assessing ankle stability in patients with apparently isolated lateral malleolar fractures. Whilst stress radiographs have been found to be both sensitive and specific in cadaveric experiments, recent clinical studies have suggested that a widened medial clear space (MCS) on stress radiographs may not equate to a functionally unstable ankle. We aimed to assess whether patients with an apparently isolated lateral malleolar fracture on presentation but with a positive gravity stress radiograph (GSR) could be successfully managed non-operatively. A prospective study of all patients with lateral malleolar fractures presenting to our orthopaedic trauma department was undertaken. Patients with an oblique distal fibular fracture pattern and no obvious MCS widening on routine radiographs underwent a GSR. Measurements of the radiographic MCS and superior clear space (SCS) were made and compared with published criteria. 155 patients were included in the study and treated non-operatively fully weight bearing in either a cast or removable boot. Following fracture union all patients had both anatomical alignment of the ankle mortise and good or excellent function. The MCS of 79% of these patients was found to be greater than 4 mm with 19% greater than 6 mm. All of these patients were successfully managed non-operatively. The currently used criteria for measurements on stress radiographs result in high numbers of false positive cases. This may be leading to unnecessary surgery. Further investigation is required in order to identify other clinical or radiographic criteria that may be of use in the assessment of functional ankle stability after fracture

Introduction:. Early stabilization has the potential to expedite early return to function and reduce hospital stay thus reducing cost to health care. A clinical audit was performed to test the hypothesis that early surgical stabilization lowers the rate of soft tissue complications and is not influenced by choice of distal fibular implants used for stabilization of ankle fractures. Methods:. All surgically treated adult patients with isolated unstable ankle fracture were included from April 2012 to April 2013 at a MTC in UK. Patients with poly-trauma were excluded. All patients underwent a standard surgical protocol: aim for early definitive surgical fixation (ORIF) within 24 hours however if significantly swollen than temporary stabilization with an external fixation followed by a staged definitive fixation. Results:. In total 172 consecutive unstable ankle fractures were included in one-year study period. Definitive fixation (ORIF) was achieved in 91% patients with only 9% patients required temporary stabilization with external fixation. Fibular locking plates were used in 59(38%) patients compared to conventional one-third tubular plates in 91(60%) patients. In ORIF group 42% (73) patients were operated within 24 hours of admission whilst 58% (83) under went early fixation after 24–72 hours. At one year follow up complications were recorded in 18(11%) patients including metal irritation requiring removal of implant in 6(4%) patients. Wound complications and deep infection leading to a further surgical procedure in 8(5%) patients. There was no statistical difference between complication rates (p=0.016) in early versus delayed fixation groups. Fibular locking plates were associated with higher soft tissue complications (13%) as compared with conventional plates (2%) (p=0.004). Conclusion:. Our study showed that the timing of the surgery has less influence on the complications of the ankle fracture fixation. However choice of implants requires careful consideration and we suggest caution against use of current fibular locking plates

Aims

This study aimed to investigate the risk of postoperative complications in COVID-19-positive patients undergoing common orthopaedic procedures.

Up to 75% of patients develop metalwork related problems following ankle fracture fixation and require further open surgery to remove them. This second procedure can lead to significant morbidity. To minimise these complications, we developed a technique, for removing the metalwork percutaneously. This technique was used in 12 patients with metalwork problems related to malleolar implants. The majority of problems occurred with the distal fibular plate and the screws. One stab incision was placed mid way between every two screws so that two screws could be removed though one incision. The plate was stripped from the distal fibula using a narrow osteotome and extracted through the distal or proximal stab wound. Lag screws were also removed through an anterolateral stab incision. When we were unable to palpate the screw head, we used a guide wire under image intensifier to locate the screw head and railroaded a cannulated screwdriver over the wire to lock into the head of the screw. Medial malleolar screws were removed in a similar fashion. The technique was undertaken as day case surgery. No complications were encountered. All patients remained symptom-free postoperatively. We conclude that percutaneous removal of metalwork around ankle joint is a safe and effective technique, allowing the patient to quickly regain their preoperative level of activity

Purpose: Our aim was to evaluate the use of Ilizarov external fixator for ankle arthrodesis in severe post-traumatic or other ankle arthritis. Patients and Methods: In the period of 8 years, 19 patients underwent ankle arthrodesis with the Ilizarov external fixator for severe ankle arthritis. In four patients the indication for arthrodesis was infection following failed surgical management of tibia plafond fractures, four patients had failed prior ankle arthrodesis and the rest suffered severe ankle arthritis. Eleven patients were male, eight female, with a mean age of 52 years (range 30–71 years). Seven patients had deformities greater then 10°. All had painful stiff ankle joints and 12 patients had disorder of ankle joint anatomy with significant limp. Anterior approach to the ankle joint was preferred, associated with distal fibular osteotomy. Secondary gradual corrections of postoperative deformity and additional compression at the arthrodesis site were performed with the Ilizarov system by closed manipulation. Following frame removal the arthrodesis was immobilised in a cast for a mean of 4 weeks. Results: The mean follow-up period was 3,9 years. A solid ankle arthrodesis was achieved in 18 of the 19 cases. Failure of solid arthrodesis was detected in one patient with insufficient arthroscopic removal of articular cartilage and internal fixation was performed. In one case with major pin tract infection at the distal talus ring distal expansion of the frame was required. According to the Mazur rating system in 12 patients the results were good, in 5 patients fair and in 2 patients poor. Conclusion: The use of Ilizarov external fixator for ankle arthrodesis provides significant interfragmentary compression forces, allows early weight bearing and post-operative adjustment of alignment of arthrodesis. This method should be considered as the treatment of choice in ankle arthrodesis, especially in revision cases and in the cases with infection around of the ankle joint

Introduction: Locking plate technology for fixation of periarticular fractures has been adopted widely since its development. Distal tibial/pilon fractures represent one of the major indications of this method of fixation. The recent development of polyaxial locking systems has offered more versatility to the surgeon. Patients and Methods: In this cohort prospective study we present our early experience of a new polyaxial locked plating system in the treatment of complex ankle and distal tibial fractures (anatomic locked plating systems– ALPS, DePuy). Demographic, mechanism of injury, AO-OTA classification, surgical procedure, postoperative course, complications, rehabilitation scheme, clinical and radiological healing as well as functional outcome (SF-36, Olerud & Molander Ankle Score, AOFAS Ankle-Hindfoot Scale, VAS pain score) were all recorded over a minimum follow-up period of 9 months. Results: Between July 2008 and July 2009, there were 21 patients with complex ankle and distal tibial fractures who were treated with this method of fixation. There were 16 males and 5 females. The mean age was 42.9 years (16–90). All female patients were over 60 years. The majority of these injuries were related to falls or RTAs (11 and 8 cases respectively). The mean time from injury to operation was 5 days (range 1 to 14 days), and in the majority of these cases a temporary bridging external fixator was applied (in 17/21 cases). All injuries were closed fractures. There were 11 patients with 43-A, 5 with 43-B, 5 with 43-C. Fractures were treated with a choice of medial ALPS tibial plate (12 patients), anterolateral ALPS tibial plate (9 patients). There were 8 associated distal fibular fractures, which were also fixed with a plate. The mean length of stay was 8 days (range 4 to 27 days). One patient had to be converted to a circular external fixator due to local deep sepsis, while two other patients had local wound healing problems managed without implant removal. The overall healing rate was over 95%, with one case of non-union at 9 months. Fifteen of them have returned to their work, while the recorded functional scores at the last follow-up visit were good in the majority. Conclusions: The overall clinical and functional outcome of this cohort of patients over the short-term follow-up was recorded to be comparable to existing similar case series of open reduction internal fixation of pilon fractures. The surgical advantages of the new system lie in its versatility, and short learning curve

In our cadaver study plating the fibula in addition to nailing the tibia decreased the mean rotation across the tibial osteotomy site compared to nailing the tibia alone. Although this is statistically significant (p=0.0034) it may not be clinically relevant as the mean values for ROM were 19.10 and 17.96 degrees respectively. Plating the fibula resulted in no statistically significant difference in the mean vertical displacement, angulation or neutral zone. Therefore, we may conclude that plating the fibula in a combined distal third tibia and fibula fracture does not enhance the stability of tibial IM nailing. The purpose of this study was to determine if combined distal third tibia and fibula fractures are more stable when fibular fixation is added to the standard tibial IM rodding. In combined distal third tibia and fibula fractures, plating the fibula does not enhance stability of intramedullary tibial nailing. No additional incision or soft tissue stripping is required for plating of the fractured fibula. The average range of motion in rotation was 19.1° for tibial and fibular fixation combined, and 18.0 ° for tibial fixation alone with a difference of 1.1°, which was clinically significant ( p=0.0034). The mean differences in vertical displacement, angulation, and neutral zone were not statistically significant. Five matched pairs of embalmed cadaveric lower limbs were dissected and stripped of soft tissue. Each tibia received a 9mm solid titanium nail that was locked proximally and distally. Fibular fixation consisted of a seven- hole LCDCP. A 1.5 cm section of tibia and a 1.0 cm section of fibula were removed. Testing was accomplished with an MTS machine. Vertical displacement was tested with an axial load to 500 N, rotation was tested with an internal and external torque of 5 Nm, and angulation was calculated from the vertical displacement data. All displacement data was measured across the osteotomy site. The mean range of motion in rotation was the only statistically significant finding. However, considering the average range of motion with and without fibular plating of 17.96° and 19.10° respectively, this finding is likely not clinically relevant. Funding: Tibial nails, bolts, fibular plates and screws provided by Synthes (Paoli, PA, USA)

Purpose: Reconstruction after resection of malignant bone tumours remains a major challenge. Free vascularised fibular grafts may be a useful alternative in this indication. Material: Thirty children (nine girls, twenty-one boys) were treated between 1993 and 2000. Mean age was eleven years. Tumour histology was: osteogenic osteo-sarcoma (n=20), Ewing tumour (n=5), justacortical osteosarcoma (n=3), synovialosarcoma (n=1), and chondrosarcoma (n=1). Tumours were located in the femur (n=17), the tibia (n=6), the humerus (n=5), the radius (n=1), and the distal fibular (n=1). The length of resection varied from 100 mm to 260 mm (mean 160 mm). Internal fixation was used in 27 cases and external fixation in three. The adjacent epiphysis was preserved in 22 cases and initial arthrodesis was performed in eight. Method: Patients were followed clinically and radiographically. A bone scintigram was obtained in all patients at least once during the postoperative period. Radiological assessment was based on the hypertrophy index of the graft using the method described by DeBoer and Wood. Functional outcome was assessed using the Enneking criteria. Results: Mean follow-up was 51 months (range 2 – 9 years). Early amputation was required in two patients due to local ocological complications. One patient died at eight months follow-up due to lung metastasis. Among the remaining 27 patients, primary bone healing was achieved in 22. The five other patients exhibited clear signs of non-vascularisation. Successful healing was achieved in four of these patients after a complementary autologous graft. All cases of stress fracture healed after simple immobilisation. The twenty-two patients who achieved primary bone healing developed a hypertrophic graft (mean 61%, range 22 – 190%). Graft hypertrophy was not observed in the five cases requiring a secondary graft after the scintigram demonstrated lack of vascularisation. Hypertrophy of the vascularised fibular graft was more marked for lower limb reconstructions than for upper limb reconstructions. Functional outcome was satisfactory in all cases. On the 30-point Enneking scale as modified, our patients achieved a mean 26 points (range 19 – 30). Discussion: Outcome was directly related to patency of the vascular anastomoses. Bone scintigraphy, performed one month after reconstruction surgery, was an important element for assessing prognosis. In case of unsuccessful vascularisation, a complementary cortico-cancellous graft should be used. Early weight-bearing is advisable using adequate protective devices. Dynamic osteosynthesis systems should be helpful in improving graft hypertrophy

Objectives

The purpose of this study was to compare the results and complications of tibial lengthening over an intramedullary nail with treatment using the traditional Ilizarov method.