Osteosynthesis aims to maintain fracture reduction until bone healing occurs, which is not achieved in case of mechanical fixation failure. One form of failure is plastic plate bending due to overloading, occurring in up to 17% of midshaft fracture cases and often necessitating reoperation. This study aimed to replicate in-vivo conditions in a cadaveric experiment and to validate a finite element (FE) simulation to predict plastic plate bending. Six cadaveric bones were used to replicate an established ovine tibial osteotomy model with locking plates in-vitro with two implant materials (titanium, steel) and three fracture gap sizes (30, 60, 80 mm). The constructs were tested monotonically until plastic plate deformation under axial compression. Specimen-specific FE models were created from CT images. Implant material properties were determined using uniaxial tensile testing of dog bone shaped samples. The experimental tests were replicated in the simulations. Stiffness, yield, and maximum loads were compared between the experiment and FE models. Implant material properties (Young's modulus and yield stress) for steel and titanium were 184 GPa and 875 MPa, and 105 GPa and 761 MPa, respectively. Yield and maximum loads of constructs ranged between 469–491 N and 652–683 N, and 759–995 N and 1252–1600 N for steel and titanium fixations, respectively. FE models accurately and quantitatively correctly predicted experimental results for stiffness (R2=0.96), yield (R2=0.97), and ultimate load (R2=0.97). FE simulations accurately predicted plastic plate bending in osteosynthesis constructs. Construct behavior was predominantly driven by the implant itself, highlighting the importance of modelling correct material properties of metal. The validated FE models could predict subject-specific load bearing capacity of osteosyntheses in vivo in preclinical or clinical studies. Acknowledgements: This study was supported by the AO Foundation via the AOTRAUMA Network (Grant No.: AR2021_03)

Introduction- Proximal humeral fractures remain a challenging problem. Most authors agree that anatomical reduction and stable fixation are essential to allow early range of motion. A variety of techniques have been described such as threaded pins, tension band wiring, screws, nails, plates and primary prosthesis. Locking plates score over other implants by the virtue of providing greater angular stability and better biomechanical properties. The Aim of the Study is to evaluate the functional outcome of PHILOS plate Osteosynthesis of displaced proximal humeral fractures. Materials and Methods- A retrospective study of 50 patients treated with PHILOS plating for the 2 part, 3part and 4 part proximal humeral fractures with a minimum follow up of 1 year. All the patients were assessed in clinic by Constant Murley and ASES scoring systems. X-ray evaluation was done for fracture healing, AVN, mal-union, non-union, collapse of head, screw penetration and impingement of plate. Results- Total of 50 acute displaced fractures of proximal humerus treated with PHILOS plating between 2003–2005 were assessed. Mean age was 64 years (15–86) Male to female ratio was 12:38, dominant to non-dominant ratio was 32:18. According to Neer’s classification 16 fractures were 2 part, 24 fractures were 3 part and 10fractures were 4 part. The overall mean Constant score was 73.4(range20–100) and ASES score was 71.7(range 25–98). Under 60 years of age the mean Constant and ASES scores were 83.5 and 83, over 60 years of age scores were 63.1 and 60.4 respectively. The complications include two deep infections which needed excision arthroplasty, one malunion, one subacromial impingement which needed plate removal after fracture healing. No mechanical failure, no non-union, no ANV was noted. Conclusions- PHILOS plate Osteosynthesis is a reliable method of treating complex proximal humeral fractures. It provides good mechanical stability and allows rapid mobilization with out compromising fracture healing

Introduction. Osteosynthesis to conserve femoral head following neck of femur (NOF) fractures has reported failure rates of 36 to 47% at 2 years. However, the long-term outcomes of THAs performed for failed osteosynthesis is yet to be elucidated. This study aims to report on long term outcome of primary THAs post failed osteosynthesis for NOF fracture. Methods. Consecutive patients with THA for failed NOF osteosynthesis managed by a single unit between January 1974 and December 2009 were included. Clinical and radiological outcomes of all 72 patients were analysed. Patients with minimum follow-up of 5 years were included. Those with less than 5 years of follow-up were reviewed for failures. Results. Mean age at the time of THA was 56. (range − 18–79). Mean follow-up was 12.9 years (range − 5 to 35.5). All patients had cemented THA. The major late complications included stem loosening in 4, stem fracture - 1, cup loosening - 7, deep infection − 3 and dislocations in 4. Thirteen (18.1%) patients had revisions. Cumulative survival rate is 80.3% (CI: 91.6–69.1) at 10 years. Conclusion. The outcomes for patients with THA for failed osteosynthesis post NOF fracture is worse in comparison with reported revision rates of THA for acute NOF fracture. The risks of poorer outcomes following salvage THA and morbidity of failed osteosynthesis need to be factored in for NOF fracture management

Background. Stress fractures at tracker after computer navigated total knee replacement are rare. Periprosthetic fracture after Minimally Invasive Plate Osteosynthesis (MIPO) of stress fracture through femoral tracker is unique in orthopaedic literature. We are reporting this unique presentation of periprosthetic fractures after MIPO for stress fracture involving femoral pin site track in computer assisted total knee arthroplasty, treated by reconstruction nail (PFNA). Methods. A 75-year old female, who had computer navigated right total knee replacement, was admitted 6 weeks later with increasing pain over distal thigh for 3 weeks without trauma. Prior to onset of pain, she achieved a range of movements of 0–105 degrees. Perioperative radiographs did not suggest obvious osteoporosis, pre-existent benign or malignant lesion, or fracture. Radiographs demonstrated transverse fracture of distal third of femur through pin site track. We fixed the fracture with 11-hole combihole locking plate by MIPO technique. Eight weeks later, she was readmitted with periprosthetic fracture through screw hole at the tip of MIPO Plate and treated by Reconstruction Nail (PFNA), removal of locking screws and refixation of intermediate segment with unicortical locking screws. Then she was protected with plaster cylinder for 4 weeks and hinged brace for 2 months. Results. Retrograde nail for navigation pin site stress fracture entails intraarticular approach with attendant risks including scatches to prosthesis and joint infection. So we opted to fix by MIPO technique. Periprosthetic fracture at the top of MIPO merits fixation with antegrade nail in conjunction with conversion of screws in the proximal part of the plate to unicortical locking screws. Overlap of at least 3cms offers biomechanical superiority. She made an uneventful recovery and was started on osteoporosis treatment, pending DEXA scan. Conclusion. Reconstruction Nail (PFNA), refixation of intermediate segment with unicortical locking screws constitutes a logical management option for the unique periprosthetic fracture after MIPO of stress fracture involving femoral pin site track in computer assisted total knee replacement

Introduction. Osteosynthesis with open reduction techniques in comminuted subtrochanteric femoral fractures can further devitalise fragments and lead to increased rate of non-union, infection, and implant failure. Therefore, these fractures require indirect reduction techniques that do not further damage the vascular supply or soft tissue attachments of the fragments. Dynamic condylar screw (DCS) using indirect reduction and minimally invasive technique may be a good alternative to avoid these complications in such fractures. Material & methods. Forty-three patients with comminuted subtrochanteric fractures underwent indirect reduction and biological internal fixation with DCS. Mean age was 43.9 (range 25–65) years. There were six Seinsheimer type III, 15 type IV and 22 type V fractures. Results. All fractures united without bone grafting at average union time of 16.16 weeks (range, 13–22) weeks. There were no cases of non-union or implant failure at mean follow-up of 25.13 months. We observed technical difficulties in six patients such as: inaccurate placement of guide pin in two patients, difficulty in sliding the plate due to obesity in one patient, difficulty in gliding barrel plate over condylar screw in one patient and technical failure in a further two patients. Seven patients had mean limb length discrepancy of 1.48 cm (range, 1–2). Mean Harris hip score was 88.2 (range 80–90) points. Two patients had coxa vara and persistent limp. Discussion. Stripping of the soft tissues to the lateral cortex is kept to a minimum in indirect reduction. The vitality of the medial fragments is not further compromised since they are not exposed. Viable bone rapidly unites by callus formation. Conclusions. Osteosynthesis of comminuted subtrochanteric fractures is desirable using indirect reduction and minimally invasive technique. Dynamic condylar screw can be used based on these principles; however, proper planning and execution of the technique is required to achieve good functional outcome and to avoid complications

Lateral tibial plateau fractures are articular fractures that can have a severe prognosis involving a joint biomechanically and functionally very important. Osteosynthesis is very often required as the articular surface must be accurately restored. In many cases rigid devices were implanted, often sacrificing lateral meniscus and leading to osteoarthritic changes in the following years. In the recent years new diagnostic tools as TC and MRI and the growing role of arthroscopy have allowed a more precise diagnosis and the possible use of less invasive devices. Considering all fractures classified as B3 according AO (or type 2 by Schatzker), we considered 10 cases treated with Barr screw and 8 cases treated with K-wires positioned as a shelf after reduction and bone grafting. All patients underwent an accelerated rehabilitation protocol with immediate mobilization and full weight bearing within 10 weeks. At the follow-up at 24 months, both the groups showed very good and comparable clinical, radiographical and functional results. We can conclude that after an accurate preoperative planning also the use of less invasive devices allow a quick recovery of range of motion without compromising the stability of osteosynthesis and the morphology of knee joint

Aim: To compare 2 methods of osteosynthesis (pinning and plate and screws) in displaced intraarticular fractures of the calcaneus. Material and method: Between 2001 and 2005, 82 displaced intraarticular fractures of the calcaneus were surgically treated in our department. Fractures were classified according to Bohler’s classification: 18 Bohler type II and 64 Bohler type III fractures. Open reduction and reconstruction with osseous grafts (autologous grafts in 22 cases and heterologous grafts in 52 cases) were used in 74 cases. In 8 cases (all of Bohler II type) grafts weren’t used. Osteosynthesis with plate and screws was performed in 26 cases and with pins in 56. The 2 groups were similar in what concerns age, sex ratio, BMI, degree of comminution. The surgical procedure was delayed in both groups (average − 6 days). Pins were removed at 6 weeks and the plates at 12 months. Results: A number of clinical parameters (pain evolution, moment of partial and full weight bearing, achievement of clinical and radiological union, ankle and forefoot mobility, etc.) were similar in both groups. Skin complications were more frequent in the plate group even if similar lateral surgical approaches were used. Pain along peroneal tendons was much more frequent in the plate group. Conclusions: Even if theoretically osteosynthesis with plate and screws assures a better fixation, in practice it has similar clinical results with the pinning. The number of complications is higher after plate osteosynthesis. The pins can be extracted with local anesthesia, while plate extraction requires lumbar or general anesthesia and a full extent surgical procedure

Purpose of the study: Osteosynthesis material adapted to a mini-invasive approach certainly reduces surgical trauma. The purpose of this work was to establish the osteosynthesis equivalence for pertrochanteric fractures using a dynamic hip screw, inserted according to the conventional technique versus a mini-invasive screw system (MISS), in terms of healing without loss of reduction. Material and methods: This was a prospective pilot study in a single centre. From May 2006 to April 2007, 78 patients (mean age 83 years, 70% women) were included (38 MISS, 40 DHS). There was one exclusion criteria: poor reduction on the orthopaedic table before incision. Radiographic and clinical follow-up for six months. The main outcome was the quality of the reduction and healing at three months. Results: Eight patients were lost to follow-up and two had died at three months. The two groups were comparable regarding mean age, ASA, fracture type, operator experience, and centring of the head screw. In the MISS group, there was a 20% reduction in blood loss, a shorter incision (9 cm) and shorter operative time (16 min). The differences were not significant. The healing rate without loss of reduction at three months was the same in both groups: 82%. There were three revisions in the MISS group: one infection and two material disassemblies. This problem disappeared with the addition of a locking screw on the nail. There were no revisions for haematoma. Discussion: There were several biases. The series was not really randomised because the type of material used depended on the availability of the instrument sets. The MISS implant evolved during the course of the study. The operators were more familiar with the DHS. Inclusion criteria were too restrictive. Multiple-injury patients with bleeding had a false impact on blood loss data. None of the differences were statistically significant. Revision for infection was not directly attributable to the material. Nail locking never failed after use of the locking screw. Conclusion: The main outcome was validated: the healing rate without reduction at three months is equivalent with the two methods (82%). A multicentric study should be conducted to confirm that the mini-incision and the MISS reduces blood loss. It could be expected that this mini-invasive approach will become the rule for osteosynthesis of these fractures with a dynamic hip screw

Purpose of the study: This study was conducted to assess short- and mid-term radiographic outcome of percutaneous posterior osteosynthesis (Sextant®)of thoracolumbar spine fractures and to identify indications and complications. Material and methods: The Sextant® material was used for 14 patients with a lumbar spine or low thoracic spine fracture. Mean patient age was 40 years (range 19–84). Outcome was reviewed retrospectively. Osteosynthesis was performed for 11 fractures Mager 1 A3, 2 B2, 1 C1 with no neurological deficit. A complementary graft and anterior decompression were used 11 times (9 fibular, 1 posterior crest + rib, 1 cage). The pre- and postoperative and 3 month ART were noted. The position of the implants was assessed on the postoperative CT. Results: Mean follow-up was 9.2 months (range 2–16). On average, ostheosynthesis was performed 15 days after trauma (range 1–90 days). There were no neurological or infectious complications. Sutures had to be resected in two cases due to cutaneous suffering. Nine patients wore a corset for three months. The absolute ART score improved from 18 preoperatively to 7 postoperatively and was noted at 14 at three months. Seven patients required heterologous blood transfusion after the anterior approach. Three screws (5.3%) were ectopic but without consequence. Discussion: Indications for percutaneous osteosynthesis include spinal fractures without neurological complications with sagittal deformation for which an anterior approach is planned initially for mechanical reasons. An isolated anterior approach is possible in this type of fracture; nevertheless, percutaneous posterior osteosynthesis enables emergency reduction and fixation of the fracture, a simplified secondary minimal anterior approach for release, and bone grafting without anterior instrumentation. Three patients did nor require complementary anterior stabilization as the percutaneous oseosynthesis played the role of «internal fixation». The advantages of percuteneous osteosynthesis are the absence of bleeding and damage to the paravertebral muscles which limits morbidity, particularly infection. This technique can be performed in the emergency setting, especially for multiple trauma victims. The drawbacks of percutaneous osteosynthesis are the impossibility of performing a posterior fusion and release the spinal canal. The loss of correction observed were probably related to the type of graft (fibular). Use of a cage should limit graft impaction and loss of correction

Purpose of the study: The treatment of thoracolumbar fractures has evolved over the last five years with cementoplasty percutaneous osteosynthesis in addition to the gold standard orthopaedic or surgical treatments. This percutaneous method preserves muscles and maintains reduction to healing. The purpose of this work was to evaluate our results in traumatology patients after five years experience, deducting our current indications. Material and methods: From February 2004 to February 2009, we included 60 patients with a type A or B2 thoracolumbar fracture free of neurological problems and who had more than 10° kyphosis. Reduction was achieved in hyperlordosis before the percutaneous procedure. In other cases we used open arthrodesis. This was a retrospective analysis of a consecutive monocentre series including 37 men and 23 women, mean age 37 years. The injury was L1 and T12 in the majority. Classification was A1 and A3 for the majority. Osteosynthesis was achieved with an aiming compass and radioscopy. A removable corset was used as needed. Reduction and position of the screws as well as need for a complementary anterior fixation were assessed on the postoperative scan. Clinically, follow-up measured pain and quality of life (VAS and Oswestry), radiographically, vertebral kyphosis. Results: Mean follow-up was 24 months. At last follow-up, the VAS was 15/100 and the Oswestry 16/100. Material was removed in ten patients. Early in our experience one patient developed neurological problems postoperatively requiring revision surgery. Postoperative vertebral kyphosis was stable at three months and was sustained at two years. Body healing was successful in all cases. There were no cases of material failure. Discussion: This is a reliable reproducible technique in the hands of a spinal surgeon. Material removal can be proposed about one year after implantation. After the age of 65 years, we favour cementoplasty. For others, we propose a sextant for A1, A2, A3 or B2 fractures with more than 15° vertebral kyphosis. This percutaneous material had major advantages for tumour surgery, for multiple injury patients and for traumatology (especially when a double approach is used). Conclusion: Percutaneous osteosynthesis of vertebral fractures is now the gold standard for well defined indications. Two therapeutic fundamentals are reduction on the operative table and preservation of the muscle stock. These satisfactory results should be confirmed after removal of the implants

Introduction:. Percutaneous fixation of intraarticular calcaneal fractures adequately restore the subtalar joint with lower soft tissue complications and equivalent short-term results compared to open fixation. However, studies have largely focused on less severe fracture types (Sanders types 2/3). We report our initial experience of this relatively new Mini-open Arthroscopic-assisted Calcaneal Osteosynthesis (MACO) technique for more comminuted calcaneal fractures (Sanders types 3/4). Methods:. We prospectively studied consecutive patients with intraarticular calcaneal fractures requiring surgical fixation between April 2012 and June 2013. MACO involves initial subtalar arthroscopic debridement, with subsequent fluoroscopic-assisted, mini-open reduction and fixation of depressed fragments using cannulated screws. Outcome scores (Manchester-Oxford Foot(MOXFQ), AOFAS Hindfoot and SF-36 questionnaires) and radiological parameters were recorded with a mean follow-up of 12 months (7–13). Results:. There were 9 patients (7 M:2 F) with a mean age of 45.4 years (24–70). All had intra-articular joint depression-type fractures: 5 Sanders type 3 and 4 Sanders type 4. Mean time to surgery was 6.6 days (1–13), operating time was 89.4 minutes (66–130) and inpatient stay was 1.7 days (1–4). All wounds healed without complication and one patient required change of a long screw 11 days post-operatively. There were significant post-operative improvements in the mean Bohler's angle (−2°[−27.2–14.8] to 30°[10.2–41.3], p<0.0002) and angle of Gissane (95°[66.2–111.7] to 111°[101.6–120], p=0.004). Mean outcome scores were 60.8(41–86) for MOXFQ and 75.3(55–92) for AOFAS Hindfoot, with 55.9% developing moderate/severe subtalar joint stiffness. Mean physical and mental SF-36 summary scores were 35.5(24.5–41.5) and 51.7(40.8–61.7) respectively. Conclusion:. We describe the MACO technique for Sanders types 3/4 calcaneal fractures. There were no soft tissue complications with good short-term outcomes, despite a reduction in hindfoot mobility. Restoration of the joint and bone stock without infection is desirable in the event of subsequent arthrodesis. We propose MACO is a valuable alternative technique to open fixation

Aim

The most frequent mechanical failure in the osteosynthesis of intertrochanteric fractures is the cut-out. Fracture pattern, reduction quality, tip-apex distance or the position of the cervico-cephalic screw are some of the factors that have been associated with higher cut-out rates. To date, it has not been established whether underlying bacterial colonization or concomitant infection may be the cause of osteosynthesis failure in proximal femur fractures (PFF). The primary objective of this study is to assess the incidence of infection in patients with cut-out after PFF osteosynthesis.

Abstract

Introduction: Proximal humeral fractures have been increasing in recent years with the increase in population over 60 years old. 20 to 30% of these fractures require surgical treatment according to the Neer criteria: fragments dislocation greater than 1 cm and/or an angle greater than 45°. A rigid fixation of proximal humeral fractures in elderly patients with osteoporotic bone is not satisfactory; new solutions are sought. The authors describe a minimally invasive technique that uses an intramedullary elastic implant – helix wire. Objective: Evaluate functional outcomes and complication rates in patients with humeral subcapital fractures who underwent fixation with helix wire. Material: Cross-sectional study evaluating patients with subcapital fracture of the humerus who underwent fixation with helix wire. Methods: There were operated 32 patients with proximal humeral fractures with helix wire implant, with an average age of 71 years old (41–90). 9 men and 23 women. According to Neer’s classification: 18 two parts fractures, 12 three parts and 2 four parts. Osteosynthesis with cannulated screws was associated to the helix wire in three and four parts fractures. In all patients the shoulder was immobilized for 3 weeks. After 3 weeks patients started rehabilitation. Results: Of the 32 fractures, 30 consolidated and there were no avascular necrosis of the humeral head. A fracture has evolved to pseudarthrosis. One patient abandoned follow-up 4 weeks after surgery, and was therefore not possible to assess the consolidation. 17 patients were assessed with mean follow-up of 18 months (4–52 months). The mean Constant score obtained was 66.2 points (53–90). 3 months after surgery all patients resumed their daily activities to the level before the fracture. Discussion and Conclusion: This minimally invasive technique provides good stability, with minimum damage of soft tissue and vascular preservation of the humeral head. Our choice is based on the number of consolidations achieved through this technique and functional evaluation of these patients, which we consider satisfactory, taking into account that the functional requirements are lower than those of a young person. Intramedullary helical implant (helix wire) is simple and biological, suitable for elderly patients with poor bone, which enables percutaneous osteosynthesis using the techniques of indirect reduction and the association, when appropriate, of cannulated screws

Purpose: The purpose of this biomechanical study is to compare the double reconstruction plate osteosynthesis versus double tension band osteosynthesis in the fixation of osteoporotic supracondylar humeral fractures.

Materials and Methods: Sixteen fresh cadavers (mean age: 75, range:70–80) were randomized into two experimental groups. Same supracondylar transverse humeral fractures were formed in both groups. Fractures in the first group, were fixed with double tension band technique using 2mm in diameter Kirschner wires and 1mm in diameter tension wires. Fractures in the second group, were fixed with double reconstruction plate osteosynthesis using 3,5mm reconstruction plates each fixing medial and lateral columns. Distal fragment was fixed with only one screw. Axial loading, maximum load, failure load and failure patterns were analysed. Statistical analysis was performed with SPSS 13.90 soft ware program. Groups were compared with Mann Whitney U test.

Results: Minimum load reqired for fracture displacement was statistically higher in double reconstruction plate osteosynthesis group (p< 0.005). Minumum load reqired for fixation failure was statistically higher in double reconstrution plate osteosynthesis group (p< 0,020).

Conclusion: Fracture healing mainly depends on a stable fracture fixation. Double plate ostesynthesis should be preferred over double tension band technique in osteoporotic supracondylar humeral fractures as it provides more stability.

Fractures of the ankle are common, and they mostly affect young adults. Wound complications are not uncommon following the fixation of these fractures. This study evaluated the impact of HIV on wound healing after plate osteosynthesis in patients with closed ankle fractures.

This is an observational retrospective study of patients operated on at a tertiary level hospital. We reviewed hospital records for patients above 18 years of age who presented with wound breakdown following ankle open reduction and internal fixation. The patients’ hospital records were retrieved to identify all the patients treated for closed ankle fractures and those who developed wound breakdown. Patients with Pilon fractures were excluded. The National Health Laboratory System (NHLS) database was accessed to retrieve the CD4 count, viral load, haematology study results, and biochemistry results of these patients at the time of surgery and subsequent follow-up. The x-rays were retrieved from the electronic picture archiving system (PACS) and were assessed for fracture union at a minimum of 3 months follow-up.

We reviewed the medical records of 172 patients with closed ankle fractures treated from 2018 to 2022. Thirty-one (18.0%) developed wound breakdown after surgery, and they were all tested for HIV. Most of the patients were male (58.0%), and the average age of the cohort was 43.7 years (range: 21 years to 84 years). Ten of these patients (32.2%) were confirmed HIV positive, with CD4 counts ranging from 155 to 781. Viral load levels were lower than detectable in 40% of these patients. All patients progressed to fracture union at a minimum of 3 months follow-up.

We observed no difference between HIV-positive and HIV-negative patients in terms of wound breakdown and bone healing post-plate osteosynthesis for closed ankle fractures.

Aim

The purpose of this study is to analyze the demographic and microbiological variables of acute ankle infections posterior to ankle osteosynthesis and to determine the different characteristics of patients withE. cloacae infection.

Abstract

Aim

Management of infection after osteosynthesis (IAO) poses a significant challenge in the setting of multidrug resistant organisms (MDRo). We have analysed whether IAO with MDRo has an adverse outcome.

The influence of rigid fixation and permanent compression on the results, the timing of fusion and rehabilitation after fractures of the femoral neck was investigated.

A hip fracture is 60–80% of all fractures of the proximal femur. Despite recent advances in the treatment of this disease, the percentage of unsatisfactory outcomes as high as 25–35%. The choice of surgical treatment in femoral neck fractures in the elderly remains as controversial as it was almost 50 years ago when Speed called him as “the unsolved fracture. Hip replacement is currently the gold standard in the treatment of femoral neck fractures. But compared with the osteosynthesis operation takes more time, is accompanied by massive blood loss, sometimes the need for transfusion and a higher risk of deep wound infection. Given these facts the best is an indoor low-traumatic method of osteosynthesis locking.

Compare of the results of femoral neck fractures using of osteosynthesis 3 blade nail, spongious screws and nail for permanent compression.

A retrospective analysis of treatment of 252 patients from 1982 to 2015 with subcapitale and transcervical fractures of the femoral neck on the basis “RCTO named by H.J. Makazhanova”. In the research locales patients older than 40 years. All patients were divided according to the applied method of treatment: 1 group of 95 patients operated using a 3-blade-nail, in the 2nd group of 105 patients operated on spongious screws, in the 3 group of 52 patients operated nail for the permanent compression, authoring. All patients underwent x-ray examination before and after surgery. The average period from time of injury before performing the osteosynthesis amounted to 4–7 days. The follow-up period was 6–12 months. The results obtained clinically and radiographically divided into good, satisfactory, poor. Good and satisfactory results were regarded as positive, and poor results as negative.

The average age of patients was 67.5 years. Among these female patients − 174 (69%), the male − 78 (31%). Traumatization more prone to elderly accounting for 206 (81.7%) cases, and only 46 (18.3%) in the middle age group. Analysis of the results of treatment showed positive results in 1 group − 69.5 %, in group 2 − 83.8 %, in group 3 − 96.2 %. In the first group of 29 (31.5 %) and in the second group of 17 (16.2 %) patients have postoperative complications: secondary displacement, nail migration, pseudarthrosis, necrosis of head. The patients of third group have postoperative complications in 2 cases (3.8 %): displacement of bone fragments according of retraumatization. Employability was restored in 1 group − 7–9 months, in group 2 - in 6–8 months, 3 group - through 6–6.5 months.

1)

The method of choice for fresh fractures of the femoral neck, especially subcapital fractures in the elderly, is a minimally invasive method of closed compression osteosynthesis.