Waiting times for arthroplasty surgery in Northern Ireland are among the longest in the National Health Service, which have been further lengthened by the onset of the SARS-CoV-19 global pandemic in March 2020. The Department of Health (DoH) in Northern Ireland has announced a new Elective Care Framework (ECF), with the framework proposing that by March 2026 no patient will wait more than 52 weeks for inpatient/day case treatment. We aimed to assess the feasibility of achieving this with reference to
Objectives. There are few reports on
Eliminating pain and restoring physical activity are the main goals of
Background: The few reported results of
Aseptic loosening is the most frequent cause of implant failure in
Introduction: Physical activity is a major outcome in
Musculoskeletal loading plays an important role in the primary stability of THA. There are about 210,000 primary THA interventions p.a. in Germany. Consideration of biomechanical aspects during computer-assisted orthopaedic surgery is recommendable in order to obtain satisfactory long-term results. For this purpose simulation of the pre- and post-operative magnitude of the resultant hip joint force R and its orientation is of interest. By means of simple 2D-models (Pauwels, Debrunner, Blumentritt) or more complex 3D-models (Iglič), the magnitude and orientation of R can be computed patient-individually depending on their geometrical and anthropometrical parameters. In the context of developing a planning module for computer-assisted THA, the objective of this study was to evaluate the mathematical models. Therefore, mathematical model computations were directly compared to in-vivo measurements obtained from instrumented hip implants. With patient-specific parameters the magnitude and orientation of R were model-based computed for three patients (EBL, HSR, KWR) of the OrthoLoad-database. Their patient-specific parameters were acquired from the original patient X-rays. Subsequently, the computational results were compared with the corresponding in-vivo telemetric measurements published in the OrthoLoad-database. To obtain the maximum hip joint load, the static single-leg-stance was considered. A reference value for each patient for the maximum hip load under static conditions was calculated from OrthoLoad-data and related to the respective body weights (BW). On average there are large deviations of the results for the magnitude (Ø=147%) and orientation (Ø=14.35° too low) of R obtained by using Blumentritt's model from the in-vivo results/measurements. The differences might be partly explained by the supplemental load of 20% BW within Blumentritt's model which is added to the input parameter BW in order to consider dynamic gait influences. Such a dynamic supplemental load is not applied within the other static single-leg-stance models. Blumentritt's model assumptions have to be carefully reviewed due to the deviations from the in-vivo measurement data. Iglič's 3D-model calculates the magnitude (Ø17%) and the orientation (Ø49%) of R slightly too low. For the magnitude one explanation could be that his model considers nine individual 3D-sets of muscle origins and insertion points taken from literature. This is different from other mathematical models. The patient-individual muscle origin and insertion points should be used. Pauwels and Debrunner's models showed the best results. They are in the same range compared to in-vivo data. Pauwels's model calculates the magnitude (Ø5%) and the orientation (Ø28%) of R slightly higher. Debrunner's model calculates the magnitude (Ø1%) and the orientation (Ø14%) of R slightly lower. In conclusion, for the orientation of R, all the computational results showed variations which tend to depend on the used model. There are limitations coming along with our study: as our previous studies showed, an unambiguous identification of most landmarks in an X-ray (2D) image is hardly possible. Among the study limitations there is the fact that the OrthoLoad-database currently offers only three datasets for direct comparison of static single leg stance with in-vivo measurement data of the same patient. Our ongoing work is focusing on further validation of the different mathematical models.
Introduction. The goal of joint-preserving surgery for the treatment of osteonecrosis of the femoral head (ONFH) is to delay or prevent osteoarthritic development. Bone marrow is a source of osteogenic progenitors that are key elements in the process of bone formation and fracture healing. We established an easy-to-use method using a conventional manual blood bag centrifugation technique traditionally used for extracting buffy coats, for concentration of nucleated cells and platelets from clinical bone marrow aspirates to obtain osteogenic progenitors and growth factors. However, it is unclear whether the surgical goals are really achieved and if so in which patients. The purpose of this study was to identify demographic, clinical, and radiographic factors predicting
To analyze the treatment results of late instability and dislocation of the hip following total hip arthroplasty. The study refers to 16 patients from 42 to 71 years old when had primary THA. The mean time of late dislocation was 9,5 years and the revision mean time was 11 years following THA. In most patients extensive polyethylene wear was documented, in 12 patients the cup or the polyethylene insert on a stable metal implant was revised and in 4 patients new polytethylene cemented insert was placed in a stable metal implant. In all cases exchange of the femoral component metal head took place. During follow up and re-evaluation 2–7 years after the revision there were 13 patients (81.25 %) with a stable THA and good function. Instability remained in three patients, which in 2 was resolved with re-revision of the cup whereas in the third (over aged) a special abduction brace was applied. Late hip dislocation 5 or more years after THA occurs mainly due to extensive polyethylene wear and in contrast with early dislocation requires more often surgical intervention. The main cause of late hip dislocation was the extensive polyethylene wear, which in three cases was associated with prosthesis mal-orientation at primary implantation and in lots of cases with age-related neuromuscular deficit. The treatment of late instability with repetitive dislocations requires surgical intervention. The revision might need exchange of cup or polyethylene insert on a stable metal implant or new polytethylene cemented insert on a stable metal implant.
Patient medical comorbidities are well-established risk modifiers of THA patient outcomes. Patient's mental state preoperatively may influence postoperative functional outcomes though just like any medical comorbidity. This study sought to determine if patient confidence in attaining post-operative functional goals was associated with objective and subjective outcomes following THA. Patients undergoing primary or revision THA at a single institution between 2008 and 2010 were administered a questionnaire consisting of demographics, body mass index, Hip Dysfunction Osteoarthritis and Outcomes Score (HOOS), SF-12 scores, the level of functionality they hoped to gain postoperatively and their confidence in attaining that goal (0–10 scale) preoperatively and postoperatively at last follow-up (minimum 12 months). Measured outcomes included length of stay, 30-day readmission, HOOS, and SF-12 physical component scores. Correlation of patient confidence in attaining treatment goals and the outcomes collected was established using multiple linear and logistic regression models that were adjusted for all variables, including baseline mental and functional scores.Introduction:
Methods:
Subluxation and dislocation are frequently cited reasons for THA revision. For patients who cannot accommodate a larger femoral head, an offset liner may enhance stability. However, this change in biomechanics may impact the mechanical performance of the bearing surface. To our knowledge, no studies have compared wear rates of offset and neutral liners. Herein we radiographically compare the in-vivo wear performance of 0mm and 4mm offset acetabular liners. Two cohorts of 40 individuals (0mm, 4mm offset highly crosslinked acetabular liners, respectively) were selected from a single surgeon's consecutive caseload. All patients received the same THA system via the posterior approach. AP radiographs were taken at 6-week (‘pre’) and 5-year (‘post’) postoperative appointments. Patients with poor radiograph quality were excluded (n0mm=5, n4mm=4). Linear and volumetric wear were quantified according to Patent US5610966A. Briefly, images were processed in computer aided design (CAD) software. Differences in vector length between the center of the femoral head and the acetabular cup (pre- and post-vector, Figure 1) allow for calculation of linear wear and wear rate. The angle (β) between the linear wear vector and the cup inclination line was quantified (Figure 1). Patients with negative β were excluded from volumetric analyses (n0mm=11, n4mm=7). Volumetric wear was accordingly calculated accounting for wear vector direction. The results from three randomly selected patients were compared to results achieved using the “Hip Analysis Suite” software package (UChicagoTech).Introduction
Methods
Radiological Inclination (RI) is defined as the angle formed between the acetabular axis and the longitudinal axis when projected onto the coronal plane. Higher RI angles are associated with adverse outcomes. Primary aim: to investigate the effect of adjusting patient pelvic position in the transverse plane by using a ‘head-down’ (HD) operating table position. This was to determine, when aiming for 35° Apparent Operative Inclination (AOI), which operating table position most accurately achieved a target post-operative RI of 42°. N=270. Patients were randomised to one of three possible operating table positions: 0°HD (Horizontal), 7°HD, or Y°HD (Patient Specific Table Position) Operating table position was controlled using a digital inclinometer. RI was measured using EBRA software.Introduction
Methods
From 18 to 60 months of follow up we observed a significant rise in BMD in all Gruen zones but zone 4 and 7. Despite this the total periprostetic BMD decreased during the study periode. There was no significant decrease in BMD in the contra lateral hip. In the spine, we observed a significant rise in BMD.
Metal on metal articulations produce chromium (Cr) and cobalt (Co) debris, particularly when the articulations are worn in. High levels in the peripheral blood are indicative of excess wear and may cause adverse effects. The present RCT investigates metal ion levels and the relationship of Co, Cr ions and lymphocyte counts during the running-in period. Following randomization to RHA (ASRTM, DePuy) or THA we obtained whole blood (wb), and serum (s) samples at baseline, 8 w, 6 m and 1 y. We measured the Co and Cr concentrations, the total lymphocyte count as well as the CD3+, CD4+, CD8+, CD19+ and CD16+/CD56+ sub populations. Cup inclination and anteversion angles came from conventional radiographs. Activity was measured as steps by pedometer and UCLA activity. Data are presented as median (range).Introduction
Materials and Methods
Aims. Day-case arthroplasty is gaining popularity in Europe. We report outcomes from the first 12 months following implementation of a day-case pathway for unicompartmental knee arthroplasty (UKA) and
Aims. This study was designed to develop a model for predicting bone mineral density (BMD) loss of the femur after
Aims. The aim of this investigation was to compare risk of infection in both cemented and uncemented hemiarthroplasty (HA) as well as in