Aims

The survival of humeral hemiarthroplasties in patients with relatively intact glenoid cartilage could theoretically be extended by minimizing the associated postoperative glenoid erosion. Ceramic has gained attention as an alternative to metal as a material for hemiarthroplasties because of its superior tribological properties. The aim of this study was to assess the in vitro wear performance of ceramic and metal humeral hemiarthroplasties on natural glenoids.

Abstract

Aims

Bi-unicondylar arthroplasty (Bi-UKA) is a bone and anterior cruciate ligament (ACL)-preserving alternative to total knee arthroplasty (TKA) when the patellofemoral joint is preserved. The aim of this study is to investigate the clinical outcomes and biomechanics of Bi-UKA.

Aims

Unicompartmental knee arthroplasty (UKA) and bicompartmental knee arthroplasty (BCA) have been associated with improved functional outcomes compared to total knee arthroplasty (TKA) in suitable patients, although the reason is poorly understood. The aim of this study was to measure how the different arthroplasties affect knee extensor function.

In this in vitro study of the hip joint we examined which soft tissues act as primary and secondary passive rotational restraints when the hip joint is functionally loaded. A total of nine cadaveric left hips were mounted in a testing rig that allowed the application of forces, torques and rotations in all six degrees of freedom. The hip was rotated throughout a complete range of movement (ROM) and the contributions of the iliofemoral (medial and lateral arms), pubofemoral and ischiofemoral ligaments and the ligamentum teres to rotational restraint was determined by resecting a ligament and measuring the reduced torque required to achieve the same angular position as before resection. The contribution from the acetabular labrum was also measured. Each of the capsular ligaments acted as the primary hip rotation restraint somewhere within the complete ROM, and the ligamentum teres acted as a secondary restraint in high flexion, adduction and external rotation. The iliofemoral lateral arm and the ischiofemoral ligaments were primary restraints in two-thirds of the positions tested. Appreciation of the importance of these structures in preventing excessive hip rotation and subsequent impingement/instability may be relevant for surgeons undertaking both hip joint preserving surgery and hip arthroplasty.

Cite this article: Bone Joint J 2015; 97-B:484–91.

Introduction

Differing descriptions of patellar motion relative to the femur have resulted from many in-vitro and in-vivo studies. The aim of this study was to examine the tracking behaviour of the patella. We hypothesized that patellar kinematics would correlate to the trochlear geometry.

Introduction: By characterising ACL strain behaviour in intact and posteromedial deficient knees under a variety of external loading conditions the aim of this work was to demonstrate whether posteromedial corner insufficiency could increase strain in an ACL reconstruction graft.

Materials and Methods: 15 fresh cadaveric knees were mounted on a materials testing machine. A miniature extensometer was implanted onto the anteromedial bundle (AMB) of the ACL. The knees were loaded in: Anterior draw (150N), varus/valgus rotation (5Nm) and internal/external rotation (5Nm) at 0°, 15°, 30°, 60° & 90° flexion. The posteromedial corner structures – posteromedial capsule, superficial MCL and deep MCL – were cut sequentially and the effect AMB strain measured.

Results: Strain data for analysis was available for 11 intact knees: Tibial internal rotation produced increased strain in the AMB at all angles of knee flexion (p< 0.05). Tibial external rotation reduced ACL strain at 0° to 30° (p< 0.05) and 60° to 90° knee flexion (p> 0.05).

Anterior loading of the tibia increased AMB strain. With the tibia free to rotate, strain was highest at 90 degrees knee flexion (5.3%) and lowest at 0 degrees (1.6%). Fixed internal and external tibial rotation reduced AMB strain produced by a 150 N anterior drawer force at all knee flexion angles.

Strain data for analysis was available for 6 Posteromedial Corner deficient knees:

With the tibia free to rotate or when locked in internal rotation, cutting the posteromedial structures had no effect on AMB strain with a 150 N anterior drawer force applied to the tibia. However, with the tibia locked in external rotation, cutting the posteromedial structures increased AMB strain at 60 and 90 degrees flexion. This difference however did not reach statistical significance.

Conclusions: The findings that division of the posteromedial structures may cause increased AMB strain and that there is significant load sharing by the peripheral ligamentous structures, suggests that valgus and rotational stresses to the knee in a patient with posteromedial corner insufficiency could lead to increased strain in the ACL graft, that would otherwise have been restrained by the posteromedial corner complex. It would also therefore seem to be appropriate to recommend the use of a collateral ligament brace in the post-operative period when combining a repair of the posteromedial structures and the ACL, to again prevent excessive graft strains.

Aim: To accurately assess cross-sectional areas of the MFLs and distinguish between the mechanical properties of the anterior and posterior meniscofemoral ligaments.

Methods: Twenty-eight fresh frozen cadaveric knees were dissected to isolate the lateral meniscus and MFLs, which remained attached to the femur. The cross-sectional areas of MFLs were determined using the Race-Amis¹ casting method for measurement. The ligaments were then tensile tested in an Instron materials testing machine. The stress and strain in each sample was calculated from measurements of cross sectional area, load applied, and increase in length,.

Results: The mean cross sectional area for the anterior MFL (aMFL) was 14.7 mm² (±14.8mm²) whilst that of the posterior MFL (pMFL) was 20.9mm² (±11.6mm²). The mean loads to failure were 300.5N (±155.0N) for the aMFL and 302.5N (±157.9N) for the pMFL, with elastic moduli of 281MPa (±239MPa) and 227MPa (±128MPa) respectively. There were no significant differences in structural or material properties between the two MFLs. When compared with the posterior cruciate ligament (PCL), the mean ultimate loads of the MFLs were similar to those of the posterior bundle of the PCL (pPC), and their elastic moduli were analogous to the anterior bundle (aPC).

Discussion: This is the first study to distinguish between the properties of the aMFL and pMFL, and indicates that both ligaments must be given equal consideration when formulating hypotheses on function. The aMFL and pMFL may also serve mutually distinct functions in the human knee. Previous authors² have commented that the reciprocal tightening and slackening of the aPC (taut in flexion) and pPC (taut in extension) indicates a difference in function of these two components of the PCL. Others³ have similarly commented on the reciprocal tightening and slackening of the two MFLs. This may also indicate differing functions for these ligaments. It is proposed that the aMFL supplements the function of the aPC, whilst the pMFL supplements the function of the pPC. This hypothesis stimulates debate on preservation of these structures during PCL reconstruction.

Race A., Amis A.A., 1996. Cross-sectional area measurement of soft tissue. A new casting method. Journal of Biomechanics 29(9), 1207–1212.

Aim: To accurately identify the meniscofemoral ligaments in cadaveric human specimens, and to determine anatomical variations in the posterior cruciate ligament that may lead to mis-identification of these structures.

Methods: A total of 79 fresh frozen knees were examined from 45 cadavers Combined anterior and posterior approaches were used to inspect the vicinity of the posterior cruciate ligament (PCL) for the presence of the anterior and posterior meniscofemoral ligaments. The anterior approach utilised a medial parapatellar incision followed by division of the anterior cruciate ligament, whilst a midline posterior arthrotomy was used for the posterior approach. Further dissection facilitated inspection of the meniscal and femoral attachments of the MFLs, and measurement of their lengths. Videos of MFL and PCL motion during passive flexion of the cadaveric were also performed.

Results: In total, 74 (94%) of the 79 specimens contained at least one meniscofemoral ligament. The posterior meniscofemoral ligament (pMFL) was present in 56 (71%) specimens, whilst the anterior meniscofemoral ligament (aMFL) was present in 58 specimens (73%). Both ligaments coexisted in 40 (51%) of knees. In 15 specimens the PCL was seen to have oblique fibres, which attached proximal to the tibial attachment of the main part of the PCL. We termed this “the false pMFL”, as it could be easily mis-identified as the posterior meniscofemoral ligament. Several other anatomical variations were also identified. The mean length of the aMFL was 20.7±3.9mm, whilst that of the pMFL was 23±4.2mm. Although the lengths of the MFLs were relatively constant, there was a wide variation in thickness.

Discussion: This study confirms the high incidence of at least one MFL in humans, which suggests a functional role for these structures. The oblique fibres of the PCL can be readily mis-identfied as the pMFL. These caveats should be borne in mind, during both arthroscopic examination and in the interpretation of magnetic resonance imaging (MRI) scans of the knee. Although some variations of the MFLs have been reported on MRI imaging2, there has been no note of the oblique fibres of the PCL reported in the present study. As this variation was present in almost one in five of our specimens, its appearance on MRI scanning requires investigation.

The function of the meniscofemoral ligaments is undetermined, although many hypotheses comment on a role in guiding the motion of the lateral meniscus during knee flexion. Other possibilities include a function as a secondary restraint supplementing the posterior cruciate ligament.

Aims: To determine load to failure for four different meniscal repair techniques, and to assess gapping across repairs under cyclical loading.

Background: Studies comparing the biomechanical properties of different meniscal repair systems are limited, and most have simply investigated load to failure. Meniscal tissue is highly anisotropic, and far weaker under tension in the radial direction. Load to failure using high loads may, therefore, not be the most physiologically relevant in-vitro test for repair of circumferential tears, and measuring increases in gapping across repair sites under cyclical loading at lower loads may be of greater importance.

Methods: Bovine menisci were divided vertically, 5mm from the peripheral edge to simulate a circumferential tear, and then repaired using one to four techniques: vertical loop sutures using 1 -PDS, bioabsorbable Meniscal Arrows (Atlantech), Meniscal Fasteners (Mitek) or T-Fix Suture Bars (Acufex). Nine specimens were tested in each group using an Instron 5500 materials testing machine to determine load to failure. A further nine specimens in each group were tested by cyclic loading between 5N and 10N at 20mm/min for 25 cycles, using a digital micrometer to measure initial gapping, and a Differential Variable Reluctance Transducer to measure the progressive increase in gapping across the repair site during the cyclical loading. Data was analysed by ANOVA and Tukey’s multiple comparison post test using Prism (GraphPad) software.

Results: The mean loads to failure (with s.d.) in Newtons were: Sutures 72.7 (22.0), Arrows 34.2 (15.4), Fasteners 40.8 (13.4), and T-Fix 49.1 (13.8). The load to failure was significantly greater with the Sutures compared to the Arrows (p< 0.001), the Fasteners (p< 0.001) or the T-Fix (p< 0.05).

The mean gapping across the repairs after 25 load cycles (with s.d.) in millimetres was: Sutures 3.3 (1.0), Arrows 2.2 (0.9), Fasteners 4.0 (0.6) and TFix 3.5 (0.7). The mean gapping was significantly less for the Arrows compared to the Sutures (p< 0.05), the Fasteners (p< 0.01), or the T-Fix (p< 0.05).

Conclusions: These results confirm that meniscal repair by suturing gives the highest load to failure, but show that Arrows give superior hold with the least increase in gapping across a repair under cyclical loading by this test protocol.

Objective: To provide a functional, anatomical description of the posteromedial structures, allowing future biomechanical studies to evaluate how they act to restrain tibio-femoral joint motion and contribute to joint stability.

Methods: Twenty fresh cadaveric knee joints were dissected. The appearance of the medial ligament complex was recorded using still and video digital photography as the specimens were flexed, extended, internally and externally rotated.

Results: We divided the medial structures into thirds, from anterior to posterior, and into three layers from superficial to deep: Layer 1: Fascia. Layer 2: Superficial MCL. Layer 3: Deep MCL and capsule. In the Posteromedial Corner (posterior third) it is not possible to separate Layers 2 and 3. The posteromedial corner (PMC) envelops the posterior medial femoral condyle. A discrete posterior oblique ligament (POL) is not identifiable. The PMC appears to be a functional unit with a role in passively restraining tibio-femoral valgus and internal rotation with the knee extended. The semimembranosus, through its tendon sheath attachments, may act as a dynamic stabiliser.

Conclusion: The MCL appears to have three functional units:Superficial MCL, Deep MCL and PMC. We believe that this description allows a logical approach to understanding the biomechanics and surgical reconstruction of the posteromedial structures. We plan to use this anatomical study as the basis for further work to evaluate the how these functional units act.