Background

Morton's neuroma is the enlargement of an interdigital nerve most commonly located between the third and fourth metatarsals. It is susceptible to entrapment and therefore is a common cause of disabling foot pain. Greek foot is a normal variant where the first metatarsal is shorter than the second metatarsal. To our knowledge there is currently no reported association between Greek foot and Morton's neuroma in the literature.

Between July 2000 and December 2002, 263 consecutive patients across 5 surgical centers underwent to a revision surgery of a failed acetabular component in which TM acetabular components were used.

There were 150 women and 113 men with a mean age of 69.5 years.

The indication for acetabular revision was aseptic loosening in 186 cases (70.7%)

Clinical evaluations were performed using the Harris hip score, the WOMAC and UCLA activity scale.

Implant and screw position, polyethylene wear, radiolucent lines, gaps, and osteolysis were assessed. Preoperatively, acetabular bone deficiency was categorized using the classification of Paprosky et al.

Statistical analysis was performed using nonparametric correlations. Standard life table was constructed, and the survival rate was calculated by means of Kaplan-Meier method.

The overall mean follow-up was 73.6 months (range, 60–84 months), and no patient was lost to follow-up.

The preoperative HHS rating improved from a mean of 43.6 ± 11.4 before revision, to a mean of 82.1 ± 10.7.

None of the patients was re-revised for loosening. The cumulative prosthesis survival was 99.2% at 5 years.

There was no correlation found between the various degrees of acetabular bony defect and the magnitude of clinical results (independent of pre-revision Paprosky grade). The use of component augments allowed us to minimize the volume of morsellized allograft used for defect repair.

TM acetabular component demonstrates promising midterm results similar to those reported by other authors.

Introduction. Tantalum is a pure metallic element and is attractive for use in orthopaedic implants because it is one of the most biocompatible metals available for implant fabrication. The potential advantages for the use of porous tantalum in total hip arthroplasty include: 1) excellent bone and tissue ingrowth observed histologically; 2) direct polyethylene intrusion into the metal substrate. This allows the elimination of any potential backside wear in the monoblock cup; 3) The two-piece design consist of a tantalum shell with screw holes for fixation into the dome of the ilium and posterior column. A polyethylene liner is cemented into the tantalum shell to eliminates backside motion. In addition, acetabular augments of porous tantalum have been developed for use in restoration of major bone deficiencies.

Prospective study on a case serie of 113 THA’s performed by two surgeons in a single institution.

Material & Methods. From 2000 to December 2003, 113 hips have undergone arthroplasty using porous tantalum implants consisting of 54 primary hip arthroplasties and 59 revision THA’s. The patients where evaluated clinical and radiographically every 3 month during the first year, and after yearly. Mean patient age was 64,2 years, (range 44–87); with 59% males and 41% females.

Results. No patients died or lost to follow-up. No further surgeries of the involved hip. No radiographic signs of loosening of the acetabular component according to the criteria of Hodgkinson et al. No problems specifically from the use of acetabular augments or extra screws has been noted. Of the revision series, a total of 16 cases have received acetabular augments.

Complications included 1 superficial infection, 2 dislocations. No vasculo-nervous complication; and in 2 cases technical difficulties to achieve good fixation due to ethiology of the THA (desarthrodesis).

The average Harris hip score improved from 48 to 89 following primary surgery.

Discussion and Conclusions Tantalum acetabular components for primary and revision hip surgery have performed well for up to 3 years, and have excellent stability.

The two-piece acetabular shell and augments permits the reconstruction of every acetabular bone defect.

Introduction: The correct position of the knee arthroplasty components is associated with a better result of the prosthesis.

In the tibial component, both intramedullar and extramedullar instrumentations have been used for its fiability, but in the femoral component intramedullar guides are more precise than extramedullar ones.

The use of the intramedullar guide for the femoral component is not always possible, because a significant deformity of the femoral shaft or when a intramedullar device has been implanted in the femur.

We have studied the alineation of the components of computer assisted total knee arthroplasties in a group of patients with femoral deformities or implants.

Material and methods: We have used the surgical navigator Stryker-Howmedica for the implantation of a knee arthroplasty in a group of 10 patients in which a endomedullar femoral guide can not be used for femoral shaft severe deformities (6 cases): Paget disease (1 case), previous femoral osteomyelitis (2 cases) or previous femoral fractures (3 cases), or a shaft device was in the femoral shaft (4 cases): long hip femoral stem (3 cases) or a femoral nail (1 case) .

We have studied the alineation of femoral and tibial components with a whole-leg X-ray and Computer Tomography.

Results: All the femoral and tibial components have been implanted in a good position (90 +/– 2 degrees in the A-P plane and a femorotibial axe 180 +/– 3 degrees. The alineation in the sagital and axial planes have been inside the desired values in all cases also.

Discussion: It is generally accepted than intramedullary guides for the femoral component is the gold standard in arthroplasty of the knee.

In the last years, the development of computer assisted systems has allowed to obtain femoral and tibial cuts referred to the mechanical axes of the bone, without using mechanical guides for the alineation.

In some studies these navigation systems are better than mechanical instruments in terms of alineation of the components in cases without great deformities.

In this study, with some cases with severe femoral shaft deformities or with some intramedullary devices that does not allow the use of intramedullary femoral guides, we think that the indication to use a surgical navigator should be nearly absolute.

Aims: To assess shoulder function and pain following open reduction and internal fixation of displaced 2, 3 & 4 part fractures of the proximal humerus, using a new fixation plate designed to provide rotation and angle stability.

Methods: Patients treated by open reduction and internal fixation with a PlantTan plate (PTP) in our institution are currently being followed-up for a period of 2 years from time of surgery. Post-operatively Constant-Murley (0–100) and Visual analogue (0–100) scoring systems are being used to assess function and pain at 2, 6, 12, and 24 months post surgery. Complications have been carefully recorded.

Results: Currently 24 patients have been treated with a PTP. Results to 6 months post surgery are presented here. Mean patient age is 65 (31–89), 11 male, 13 female. Three were undertaken for non-union and 21 for acute fractures. At 2 months post surgery mean Constant-Murley Score (CMS) was 24 (12–49) on the fractured side compared to 89 (80–95) on the uninjured shoulder, with a mean Visual Analogue Score (VAS) of 37 (1–82). At 6 months mean CMS was 49 (28–75) for the fractured side compared to 88 (71–100) for the uninjured side, with a mean VAS of 26 (2–69). Three patients have died during the follow-up period; all deaths have been confirmed, by the coroner, as being unrelated to the procedure. Screws have backed out in 3 (12.5%) patients with 1 requiring implant removal and 1 requiring revision. There has been 1 (4.2%) case of frozen shoulder requiring MUA and 3 (12.5%) superficial wound infections. All 3 infections have resolved following a course of oral antibiotics.

Conclusion: We believe the PTP may prove to be a powerful tool in the management of proximal humeral fractures, however further evaluation including long-term follow-up is required. We aim to report on this in the future.

Objective: To provide a functional, anatomical description of the posteromedial structures, allowing future biomechanical studies to evaluate how they act to restrain tibio-femoral joint motion and contribute to joint stability.

Methods: Twenty fresh cadaveric knee joints were dissected. The appearance of the medial ligament complex was recorded using still and video digital photography as the specimens were flexed, extended, internally and externally rotated.

Results: We divided the medial structures into thirds, from anterior to posterior, and into three layers from superficial to deep: Layer 1: Fascia. Layer 2: Superficial MCL. Layer 3: Deep MCL and capsule. In the Posteromedial Corner (posterior third) it is not possible to separate Layers 2 and 3. The posteromedial corner (PMC) envelops the posterior medial femoral condyle. A discrete posterior oblique ligament (POL) is not identifiable. The PMC appears to be a functional unit with a role in passively restraining tibio-femoral valgus and internal rotation with the knee extended. The semimembranosus, through its tendon sheath attachments, may act as a dynamic stabiliser.

Conclusion: The MCL appears to have three functional units:Superficial MCL, Deep MCL and PMC. We believe that this description allows a logical approach to understanding the biomechanics and surgical reconstruction of the posteromedial structures. We plan to use this anatomical study as the basis for further work to evaluate the how these functional units act.