This study aimed to ascertain whether stabilising only the AITFL is enough to prevent talar shift, and to test a simple, novel technique to reconstruct the AITFL.

Twelve cadavers were used. Talar shift was measured following: 1- no ligaments cut; 2- entire deltoid ligament division; 3- group A (5 specimens) PITFL cut whilst group B (7 specimens) AITFL cut; 4- group A had AITFL divided whilst group B had the PITFL cut. Reconstruction of the AITFL was performed using part of the superior extensor retinaculum as a local flap. Measurement of talar shift was then repeated.

With no ligaments divided, mean talar shift was 0.8mm for group A and 0.7mm for group B. When the deltoid ligament was divided, mean talar shift for group A was 4.8mm compared to 4.7mm in group B (P=1.00). The mean shift in group A after PITFL division was 6.0mm, increasing the talar shift by an average of 1.2mm. In group B after AITFL division mean talar shift was 8.3mm (P=0.06), increasing talar shift by an average of 3.6 mm. After division of the second tibiofibular ligament, mean talar shift in group A measured 10.0mm and in group B was 10.9mm(P=0.29).

Three times more talar shift occurred after the AIFTL was divided compared to the PITFL. Repairing just the PITFL (for example by fixation of the posterior malleolus avulsion fracture) may not adequately prevent talar shift while reconstruction of the AITFL potentially restores ankle stability.

MTPJ instability is very common yet there is no consensus of best surgical technique to repair it. The current techniques range from extensive release, K-wire fixation or plantar plate repair, which requires release of remaining intact plantar plate and all collaterals. Such varieties reflect a controversy regarding its aetiology. The aim of this study was to assess how much each structure contributes towards the stability of MTPJ and describing a simple technique designed by the senior author that can anatomically reconstruct all contributing structures to the pathology.

Eleven cadaveric toes in two groups (five in group 1 and six in group 2) were included. Dorsal displacement (drawer test) was used to measure instability in an intact MTPJ followed by two different series of sequential sectioning of each part of collateral ligament (PCL and ACL) and part or complete plantar plate.

Group 1 result showed that after incising PCL dorsal displacement was 0.51mm, PCL+ACL was 0.8mm and PCL+ACL+50% plantar plate was 2.39mm. Group 2 results showed that after incising 50% plantar plate dorsal displacement was 0.48mm, after full plantar plate 0.62mm, plantar plate +PCL was 0.74mm and plantar plate +PCL+ACL was 1.06mm.

To produce significant instability, both collaterals on one side with combination of 50% plantar plate tear was needed. An isolated 50% tear of plantar plate caused less displacement of MTPJ compared to isolated collaterals. PCL contributed more towards the stability of MTPJ when the plantar plate was intact. Whereas, ACL contributed more stability when plantar plate was sectioned. The current practice of releasing the collaterals to gain access for repairing plantar plate by indirect method should be re-evaluated. A new technique of proximal tenotomy of extensor digitorum brevis tendon looped around the transverse ligament and attached to the neck of metatarsal reconstructs both structures (plantar plate and collaterals).

Adequate perpendicular access to the posterolateral talar dome for osteochondral defect repair is difficult to achieve and a number of different surgical approaches have been described. This cadaveric study examined the exposure available from various approaches to help guide pre-operative surgical planning.

Four surgical approaches were performed in a step-wise manner on 9 Thiel-embalmed cadavers; anterolateral approach with arthrotomy, anterolateral approach with anterior talo-fibular ligament (ATFL) release, anterolateral approach with antero-lateral tibial osteotomy, and anterolateral approach with lateral malleolus osteotomy. The furthest distance posteriorly which allowed perpendicular access with a 2mm k-wire to the lateral surface of the talar dome was measured from the anterior aspect of the talar dome.

The mean antero-posterior diameter of the lateral talar domes included in this study was 45.1mm. An anterolateral approach to the ankle with arthrotomy provided a mean exposure of the anterior 1/3rd of the lateral talar dome. ATFL release increased this to 43.2%. A lateral malleolus osteotomy provided superior exposure (81.5% vs 58.8%) compared to an anterolateral tibial osteotomy.

Only the anterior half of the lateral border of the talar dome could be accessed with an anterolateral approach without osteotomy. A fibular osteotomy provided best exposure to the posterolateral aspect of the talar dome and is recommended for lesions affecting the posterior half of the lateral talar dome.

There is debate whether a home run screw (medial cuneiform to 2nd metatarsal base) combined with k-wire fixation of 4th & 5th rays is sufficient to stabilise Lisfrance injuries or if fixation of the 3rd ray is also required. Unlike the 2nd, 4th and 5th TMTJ, stabilisation of the 3rd requires either intra-articular screw or a cross joint plate which both risk causing chondrolysis and/or OA.

Using 8 Theil embalmed specimens, measurements of TMTJ dorsal displacement at each ray (1st to 5th) and 1st – 2nd metatarsal gaping were made during simulated weight bearing with sequential ligamentous injury and stabilisation to determine the contribution of anatomical structures and fixation to stability.

At baseline mean dorsal TMTJ displacement of the intact specimens during simulated weight bearing (mm) was: 1st: 0.14, 2nd: 0.1, 3rd:0, 4th: 0, 5th: 0.14. The 1st-2nd IM Gap was 0mm. After transection of the Lisfranc ligament only, there was 1st-2nd intermetatarsal gaping (mean 4.5mm), but no increased dorsal displacement. After additional transection of all the TMTJ ligaments dorsal displacement increased at all joints (1st: 4.5, 2nd: 5.1, 3rd: 3.6, 4th: 2, 5th: 1.3). Stabilisation with the home run screw and 4th and 5th ray k-wires virtually eliminated all displacement. Further transection of the 3rd/4th inter-metatarsal ligaments increased mean dorsal displacement of the 3rd ray to 2.5mm. K-wire fixation of the 3rd ray completely eliminated dorsal displacement.

The results suggest that stabilising the 2nd and 4/5th TMTJs will stabilise the 3rd if the inter-metatarsal ligaments are intact. Thus 3rd TMTJ stability should be checked after stabilising the 2nd and 4/5th. Provided the intermetatarsal ligaments (3rd-4th) are intact the 3rd ray does not need to be stabilised routinely.

Background

Lisfranc/midfoot injuries are complex injuries with a reported incidence of 1 in 55000 in literature and frequently overlooked. But, recently they are becoming more commonly diagnosed with advent of CT scan and examination under anaesthesias (EUA) for suspicion fractures. Here we present a case series results of a single surgeons experience over the last 6 years.

Introduction

Stress fractures in the foot are common; the common practice is to look for any factor in the history or for any foot deformity that could cause the fracture. Once found, it is common to treat the fractures without further investigations. The aim of this study is to assess if we are missing any underlying metabolic disorder associated with such injury.

Aim

To assess the results of Castles procedure performed at our hospital compared with those available in literature.

Study Design: A six-year retrospective analysis of all instrumented spinal fusions performed in the Nuffield Orthopaedic Centre and the John Radcliffe Hospital.

Objective: To assess the incidence of infection following instrumented spinal fusion, the nature of the infecting organisms and their subsequent management.

Subjects: All patients who had undergone removal of spinal metalwork were analysed for evidence of infection. The indications for removal of metalwork included proven deep infection, refractory postoperative pain or planned removal after thoraco-lumbar fracture.

Outcome Measures: Successful treatment of infection was documented when the patient was asymptomatic and inflammatory markers remained within normal limits following cessation of antibiotic therapy. Failure was documented when the patient had recurrent sepsis, refractory pain following removal of metalwork or died.

Results: 80 spinal infections following instrumented fusions were found between 1997 and 2003. 34 of the infecting organisms were propionibacteria, 19 were coagulase negative staphylococcus, 10 were staphylococcus aureus, 8 were methicillin resistant staphylococcus aureus, 3 were coliforms, 2 were proteus, 2 were diphtheroids, 1 was alpha haemolytic streptococcus and 1 was anaerobic streptococcus. 29 of these infections were polymicrobial. Of 55 patients who had metalwork removed secondary to pain, 20 patients had proven infection postoperatively (36.3%). Preoperative inflammatory markers failed to accurately predict the presence of infection for trauma patients. Our management of infection is removal of metalwork with six intraoperative samples sent for culture and histology specimens, followed by administration of at least six weeks of intravenous or oral antibiotic, depending on the organism and its antibiotic sensitivity. Prolonged treatment is used where inflammatory markers remain raised.

Conclusions: Infection of spinal implants presents different management problems to those which follow infected total joint replacement. The lack of specific clinical, laboratory and radiological findings in patients who are subsequently diagnosed as having infections associated with spinal instrumentation presents a challenging clinical problem. We found the most predictive sign of infection following instrumented fusion of scoliotic spines was postoperative pain. CRP and ESR were unreliable as predictors of infection.