Proper acetabular cup placement is very important factor for successful clinical results in total hip arthroplasty (THA). Malposition of acetabular cup has been linked to increased rates of dislocation, impingement, pelvic osteolysis, cup migration, leg length discrepancy and polyethylene wear. Recently, some authors reported usefulness of navigation systems to set the acetabular cups with correct position. The purpose of this study is to evaluate the accuracy of acetabular cup placement in THA using computed tomography (CT)-based navigation system. Subjects were 235 hip joints we performed primary THA using CT based navigation system (Stryker® Navigation System, Stryker Corporation, Kalamazoo, MI, USA) from 2008 to 2014 and could assess the implant position by postoperative CT images. Their average age was 65.1 years (range 35–88). In all cases, non-cemented acetabular cups were implanted. TriAD cups (Stryker®) were used in 31 hips, and Tritanium cups (Stryker®) were used in 15 hips, and Trident cups (Stryker®) were used in 189 hips. Registration in this navigation system used surface matching system. We designed cup implantation using preoperative CT images and 3-dimensional (3-D) templates. The planned position of acetabular cup was in principle 40 degrees of inclination and 20 degrees of anteversion. However, we adjusted the better position of the cups according to pelvic tilt and femoral neck anteversion. When we placed acetabular cups, the position, inclination and anteversion, were measured by navigation system. After surgery, the positions of the cups were measured using postoperative CT images, navigation software and 3-D templates. Postoperative position using CT images were adjusted according to preoperative pelvic plane. The discrepancies between intraoperative navigation data and postoperative CT images data were analyzed as accuracy of navigation system in cup placement.Introduction
Material and Methods
Acetabular reconstruction of a total hip arthroplasty (THA) for a case with severe bone loss is most challenging for surgeon. Relatively high rate of failure after the reconstruction surgery have been reported. We have used Kerboull-type acetabular reinforcement devices with morsellised or bulk bone allografts for these cases. The purpose of this study was to examine the midterm results of revision THA using Kerboull-type acetabular reinforcement devices. We retrospectively reviewed 20 hips of revision THA (20 patients) between February 2002 and August 2010. The mean age of the patients at the time of surgery was 67.4 years (range 45–78). All of the cases were female. The mean duration of follow-up was 6.5 years (range 2.1–10.4). The reasons of revision surgeries were aseptic loosening in 10 hips, migration of bipolar hemiarthroplasty in 8 hips, and rheumatoid arthritis in 2 hips. We classified acetabular bone defects according to the American Academy of Orthopaedic Surgeons (AAOS) classification; we found two cases of Type II and eighteen cases of Type III. In terms of bone graft, we performed both bulk and morsellised bone grafts in 6 hips and morsellised bone grafts only in 14 hips. We assessed cup alignment using postoperative computed tomography (CT) and The post-operative and final follow-up radiographs were compared to assess migration of the implant. We measured the following three parameters: the angle of inclination of the acetabular device (Fig. 1); the horizontal migration (Fig. 2a); and vertical migration (Fig. 2b). Substantial migration was defined as a change in the angle of inclination of more than 3 degrees or migration of more than 3 mm. The pre- and postoperative hip functions were evaluated using the Japanese Orthopaedic Association (JOA) hip score.Introduction
Patients and methods
Ankle arthrodesis is a common treatment for destroyed ankle arthrosis with sacrificing the range of motion. On the other hand, total ankle arthroplasty (TAA) is an operation that should develop as a method keeping or improving range of motion (ROM); however, loosening and sinking of the implant have been reported in especially constrained designs of the implant. The concept of FINE TAA is the mobile bearing system (Nakashima Medical Co., Ltd, Okayama Japan) that can reduce stress concentration to implants. The purpose of this study is to evaluate the short-term results of FINE TAA. We performed FINE TAA for osteoarthritis (OA) (2 ankles of 2 patients) and rheumatoid arthritis (RA) (4 ankles of 3 patients). All patients were female. The mean age of the patients was 71.4 years old at the operation. The mean follow-up period was 32.6 (range, 18–55) months. All patients were assessed for Japan Orthopedic Association (JOA) score and ROM in plantar flexion and dorsiflexion at the point of pre-operation and final follow-up. We evaluated radiolucent line, subsidence, and alignment of implants at the latest follow-up.Introduction
Objectives and Methods
While research has been carried out widely for sagital pelvic tilt, research reports for coronal pelvic obliquity are few. The aim of this study is to evaluate changes of the pelvic obliquity before and after total hip arthroplasty. This retrospective study includes 146 cases of hips that were received total hip arthroplasty. There were 20 cases of revision, and 2 cases of re-revision. 17 cases were received bilateral total hip arthroplasty. The standing plain X-ray was used for evaluation of the pelvic obliquity in both before and 1-year after surgery. The correlation of pelvic obliquity was assessed between before and after surgery. 146 cases were classified into 3 groups (A, B, and C) according to the severity of the pelvic obliquity (0º−3º, 3º−6º, and >6º). Among the groups, statistical analysis was evaluated in the leg length discrepancy and the range of motion of the hip (flexion, extension, abduction, adduction, internal and external rotation) before and after surgery with 95% confidence intervals.Introduction
Material and Methods
Continuous epidural anesthesia or femoral nerve block has decreased postoperative pain after total knee arthroplasty to some extent. Although the established efficacy of these pain relief method, some adverse events such as hematoma or muscle weakness are still problematic. Intraoperative local infiltration of analgesia (LIA) has accepted as a promising pain control method after total knee arthroplasty. The safety and efficacy of LIA has been reported, although there are still limited evidence about the effect of LIA on quadriceps function and recovery of range of motion in early post-operative phase. The purpose of this study is to compare the quadriceps function and range of motion after TKA between the LIA with continuous epidural anesthesia and continuous epidural anesthesia alone. Thirty patients with knee osteoarthritis who underwent primary TKA were included in this study. Patients who took anticoagulants were treated continuous epidural anesthesia alone (n=11) and the other patients were treated with LIA with continuous epidural anesthesia (n=19). A single surgeon at our department performed all surgeries. Surgical procedure and rehabilitation process was identical between two groups. Before the implantation, analgesic drugs consisting of 20 ml of 0.75 % ropivacaine and 6.6 mg of dexamethasone were injected into the peri-articular tissues. In each group, fentanyl continuous epidural patient-controlled analgesia (PCA) was also used during 48-h post-operative period. Knee flexion and extension angle were evaluated before surgery, post-op day 3, 7, 10 and 14. The quadriceps function was evaluated by quadriceps peak torque at 30° and 60° flexion using VIODEX. The peak torque was recorded preoperatively, day 14 and 3 month after surgery. The difference between two groups was analyzed by Mann Whitney U-test using Prism 6, a statistical software.Background
Methods
We performed total knee arthroplasty (TKA) without patella resurfacing in patients with osteoarthritis (OA) of the knee. The purpose of the present study was to evaluate the clinical results and the appropriateness TKA without patella resurfacing. A total of 61 patients (61 affected knees) who had undergone a Low Contact Stress mobile − bearing knee arthroplasty (LCS− TKA) (Depuy, Warsaw, IN. USA) 10 years or more before the present study were enrolled. The LCS− TKAs did not include patella resurfacing. The patients' mean age was 77.7 ± 6.1 years (range: 59−94 years). The mean follow-up period was 121 ± 2.4 months (range: 120−129 months). The clinical evaluation used the scoring system for OA of the knees issued by the Japanese Orthopaedic Association (JOA score). We defined patellofemoral (PF) pain, crepitation, patellar clunk syndrome, spin-out, and reoperation as complications. We also used X-Ray imaging to measure the component angle, patella height, lateral shift ratio, tilting angle, femorotibial angle, posterior condylar offset and joint line, and evaluated the localization of sclerotic changes in the patella. All of the LCS− TKAs were performed by one surgeon using the midvastus approach. During the operation, the osteophyte around the patella was resected, and the osteophyte on the articular surface was shaped using a bone saw. For statistical analysis we performed Mann-Whitney's U test and adopted a significance level of P<5%.Objective
Methods
Rotational malalignment of the femoral component still causes patellofemoral complications that result in failures in total knee arthroplasty (TKA). To achieve correct rotational alignment, a couple of anatomical landmarks have been proposed. Theoretically, transepicondylar axis has been demonstrated as a reliable rotational reference line, however, intraoperative identification of the transepicondylar axis is challenging in some cases. Therefore, surgeons usually estimate the transepicondylar axis from posterior condylar axis (PCA) using twist angle determined by the preoperative X-rays and CT. While PCA is the most apparent landmark, radiographs are not able to detect posterior condylar cartilage. In most osteoarthritic knees, the cartilage thickness of the posterior condyle is different between medial and lateral condyles. The purpose of this study is to evaluate the effect of the posterior condylar cartilage on rotational alignment of the femoral component in large number of arthritic patients. Furthermore, we investigated whether the effect of posterior condylar cartilage is different between osteoarthritis (OA) and rheumatoid arthritis (RA). Ninety-nine OA knees and 36 RA knees were included. Detailed information is summarized in Table 1. All cases underwent TKA using navigation system. The institutional review board approved the study protocol and informed consent was obtained from each participants. To evaluate the effect of posterior condylar cartilage, we measured two different condylar twist angle (CTA) using navigation system and intraoperative fluoroscopy-based multi-planner reconstruction (MPR) images obtained by a mobile C-arm. To uniform the SEA in two different measuring systems, we temporary inserted a suture anchors in medial and lateral prominence. The CTA that does not include the posterior condylar cartilage (MPR CTA) is evaluated on MPR images and the CTA that does include the posterior condylar cartilage (Navi. CTA) is calculated by navigation system. The difference between these two angles corresponds to the effect of posterior condylar cartilage on the rotation of the femoral component (Fig. 1). The paired or unpaired t test was used to compare the obtained data. The statistics were performed using GraphPad Prism 6. A P value of 0.05 or less is considered as a significant difference.Objective
Methods
Optimal orientation of the acetabular cup is vital issue not only for primary but revision total hip arthroplasty (THA). Especially in revision THA, malorientation of the cup is likely to occur because anatomical landmark around acetabular rim often disappeared by the osteolytic bony destruction or the process of cup removal. As a consequence, higher dislocation rate and accelerated wear of bearing surface compared with primary THA, which affect the outcome of revision THA, are concerned. On the other hand, computer aided navigation system has been developed in recent years because of substantial errors of manual technique in cup placement even with experienced surgeon. The purpose of this study was to evaluate the accuracy of the cup orientation in revision cementless THA using CT based navigation system. Thirteen patients who underwent revision cementless THA with CT based navigation system (Stryker Japan) were employed for this study. The average age at surgery was 64 years (range, 45–78 years, 3 men and 11 women). Primary surgery was cementless THA in 4 and BHA in 9 hips. Disorder which led to revision THA was loosening of the cup, massive retroacetabular osteolysis, and severe proximal migration of bipolar outer head. In most cases, acetabular rim was not conserved. After removal of the cup or outer head, we revised acetabular components with cementless hemispherical TriAD cups (Stryker Japan) using direct lateral approach in lateral decubitus position. For all the patients, post-operative CT scans were performed and the cup inclination and anteversion angle were measured using 3D image-processing software (Stryker, Japan). The difference between the intra-operative target angle and the angle measured from the post-operative CT image were calculated.Introduction
Materials and Methods
Herniation pits had been considered as a normal variant, a cystic lesion formed by synovial invagination. On the contrary, it was also suggested that herniation pits were one of the diagnostic findings in femoroacetabular impingement (FAI) because of the high prevalence of herniation pits in the FAI patients. To date, the exact etiology is still unknown. The purpose of this study was to evaluate whether there is an association between the presence of herniation pits and morphological indicators of FAI based on computed tomography (CT) examination. We reviewed the CT scans of 245 consecutive subjects (490 hips, age: 21–89 years) who had undergone abdominal and pelvic CT for reasons unrelated to hip symptom from September, 2010 to June, 2011. These subjects were mainly examined for abdominal disorders. We confirmed by the questionnaire survey that there were no subjects who had symptoms of hip joints. We reviewed them for the presence of herniation pits and the morphological abnormalities of the femoral head and acetabulum. Herniation pits were diagnosed when they were located at the anterosuperior femoral head-neck junction with a diameter of more than 3 mm. We measured following four signs as indicators for FAI: α angle, center edge angle (CE angle), acetabular index (AI), and acetabular version. Mann-Whitney U-test was used for statistical analysis.Introduction
Materials and methods
Hip Arthrodesis had been considered as a useful surgical option in young adult patient with high activity demands suffering from osteoarthritis of the hip. Although the procedure surely eliminates pain of the hip joint, it can also cause disorders of the adjacent joints in addition to the complete loss of motion, might consequently deteriorate the activity of daily living. The purpose of this retrospective study was to investigate the efficacy and drawback of hip arthrodesis, focusing on the effect of this procedure on the adjacent joints. From 1976 to 1989, 29 hip arthrodesis were performed and 22 hips were followed up (1 died, 6 lost). Disorders led to arthrodesis were septic arthritis (1 hip), post-traumatic (1), osteonecrosis (1), primary osteoarthritis (3), and secondary osteoarthritis due to DDH (16). The average age at surgery was 38 years (range, 19–53 years, 6 men and 16 women). Hip arthrodesis was indicated for young active adults with end stage osteoarthritis, who had normal or mild osteoarthritis in contralateral hip and needed physical labor. The hip was positioned in 30 degrees of flexion, 0 to 5 degree of external rotation, and 0 to 5 degree of abduction. Clinical and radiographic assessment was done for these patients. The clinical follow-up consisted of questionnaire which assessed ability of typical Japanese daily living movement and patient's satisfaction. The condition of the adjacent joints was evaluated clinically and radiographically.Introduction
Materials and Methods
Tartrate-resistant acid phosphatase is contained in multinucleated giant cells of giant cell tumour of bone (GCT) and chondroblastoma (CBL) as well as in osteo-clasts. Yet few studies have so far been done regarding serum acid phosphatase (AcP) level in patients of GCT or CBL. The purpose of this study is to elucidate the clinical significance of serum AcP as a tumour marker for GCT and CBL. Serum AcP value was examined in nine GCT patients and three CBL patients before and after surgery. In the GCT cases, serum AcP values before surgery were high in five cases. They were 14.0 IU/L, 68.7 IU/L, 45.9 IU/L, 21.9 and 31.3 IU/L (normal value; 7.1–12.6 IU/L). They decreased after surgery to 7.7 IU/L (55% of the preoperative value), 8.2 IU/L (12%), 7.8 IU/L (17%), 6.1 IU/L (28%) and 10.0 IU/L (32%), respectively. Serum AcP values before surgery were within normal limits in the remaining four GCT cases. Even in these four cases, postoperative serum AcP level was lower than the preoperative level. Postoperative/preoperative AcP ratios in these four cases were 67%, 80%, 69% and 76%. In the CBL cases, serum AcP values were high in all cases. They were 15.1 IU/L, 13.1 IU/L and 13.7 IU/L. They decreased after surgery to 10.3 IU/L (68% of the pre-operative value), 10.2 IU/L (78%) and 9.7 IU/L (71%), respectively, all within normal limits. Therefore, it is concluded that serum AcP is a useful tumour marker for GCT and CBL in diagnosing the tumour as well as in evaluating the efficacy of treatment.
