Advertisement for orthosearch.org.uk
Results 1 - 1 of 1
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_I | Pages 18 - 18
1 Jan 2004
Robinson B Halliday S Price A Beard D Rees J Dodd C Murray D Goodfellow J O’Connor J
Full Access

When the Oxford unicompartmental meniscal bearing arthroplasty (UCA) is used in the lateral compartment of the knee 10% of the bearings dislocate. An in-vitro cadaveric study was performed to investigate if the anatomy and joint geometry of the lateral compartment was a contributory factor in bearing dislocation. More specifically, the study investigated if the soft tissue tension of the lateral compartment, as determined by the length of the lateral collateral ligament (LCL), was related to bearing dislocation. A change in length of greater than 2 mm is sufficient to allow the bearing to dislocate.

The Vicon Motion Analysis System (Oxford Metrics, Oxford, UK) was used to assess length changes in the LCL of seven cadaveric knees. Measurements were made of the LCL length through knee flexion and of the change in LCL length when a varus force was applied at a fixed flexion angle. Measurements were made in the normal knee and with the knee implanted with the Oxford prosthesis.

In the intact knee the mean LCL change was 5.5mm (8%) over the flexion range. After implantation with the Oxford UCA the mean change in length was only 1 mm (1%). There was a significant difference in the LCL length at 90° (p=0.03) and 135° (p=0.01) of knee flexion compared to the intact knee. When a varus force was applied the LCL length change of the intact knee (5.4 mm) was significantly different (p=0.02) to that of the knee with the prosthesis implanted (2.7 mm)

This study used a new method to dynamically measure LCL length. It found that after implantation of the Oxford lateral UCA the LCL remains isometric over the flexion range and does not slacken in flexion as it in the normal knee. This would suggest that the soft tissue tension was adequate to contain the bearing within the joint.

However, when a varus force was applied the LCL did not sufficiently resist a displacing force producing an LCL length change greater than 2 mm.

The evidence provided by this study is contradictory. The “lack of change in LCL length through flexion” suggests that the ligament remains tight through range and is unlikely to allow dislocation. However, the amount of distraction possible when an adducting moment is applied is sufficient to allow bearing dislocation. The length tension properties of the lateral structures are therefore implicated in the mechanism of dislocation.