Periprosthetic bone loss is one of the major concerns in total hip arthroplasty (THA). Several studies have reported that bone mineral density (BMD) decreases after THA especially in the proximal femur. The phenomenon is explained as an adaptive remodeling response of bone tissue to a significant alteration of its stress environment. The purpose of this study was to evaluate the pattern of load transfer after stem implantation, and to compare the stress of finite element (FE) studies to BMD in the proximal femur after THA.

Forty-eight consecutive patients who received a primary cementless THA with implantation of the same femoral prosthesis (VerSys, Zimmer Inc, Warsaw, Idaho) between January 2007 to December 2007 were identified. Twenty-nine patients were excluded for administration of alendronate or alfacalcidol, and four patients were lost to follow-up or had incomplete computed tomography (CT) or dual-energy X-ray absorptiometry (DEXA) data. The remaining 15 patients formed the basis of this study. The average age of the patients at the time of THA was 64 years (range, 44 to 82 years). BMD were measured with DEXA at 1 week and 12 months after THA. Regions of interest (ROIs) were defined according to Gruen’s system (ROIs 1–7). FE models of the femur and stem were obtained from pre-and postoperative CT data by “Mechanical Finder (Research Center of Computational Mechanics Inc.)” that was a software to make FE models considering individual bone shape and density distribution. FE model of the femur consisted of approximately 600,000 elements and that of the stem consisted of 200,000 elements. The shaft was restrained and force was applied to the femoral head and directed within the coronal plane at 20° to the shaft axis. Stress distribution and strain energy density were analyzed and compared to DEXA data.

BMD maintained at 1 year after THA in ROI 3,4,5, and 6, where as BMD decreased in ROI 1,2, and 7 by 17%, 16%, and 26 %, respectively. This means that BMD decreased especially in the proximal femur at 1 year after THA. FE studies revealed that the stress and the strain energy density in ROI 3,4,5, and 6 were much higher than in ROI 1,2, and 7. It was suggested that high stress and strain energy density are contributed to maintenance of BMD in the femur at 1 year after THA.