Advertisement for orthosearch.org.uk
Results 1 - 2 of 2
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 99-B, Issue SUPP_20 | Pages 31 - 31
1 Dec 2017
Maeda Y Sugano N Nakamura N Tsujimoto T Kakimoto A
Full Access

The purpose of this preliminary study was to evaluate the feasibility and accuracy of HipAlign (OrthAlign, Inc., USA) system for cup orientation in total hip arthroplasty (THA). The subjects of this study were 5 hips that underwent primary cementless THA via a posterior approach in the lateral decubitus position. Evaluation 1; after reaming acetabular bone, a trial cup was placed in the reamed acetabulum in an aimed alignment using HipAlign. Then, the trial cup alignment was measured using HipAlign and CT-based navigation system in the radiographic definition. Evaluation 2; a cementless cup was placed in the reamed acetabular in an aimed alignment using CT-based navigation and cup alignment was measured using both methods. After operation, we measured the cup alignment using postoperative CT in each patient. In the results, the average cup inclination measured with HipAlign was around 5 degrees of true cup inclination angles. The average cup anteversion with HipAlign tended to be larger than that with CT-based navigation or postoperative CT in both evaluations. That is because there is a difference in the pelvic sagittal tilt between the lateral position and supine position. In conclusion, this study suggests that guiding cup alignment with the use of HipAlign is feasible through a posterior approach and the mean cup inclination measured with HipAlign showed an acceptable level of accuracy, but the mean cup anteversion is not reliable. We need a further modification for pelvic registration to improve the accuracy of cup anteversion.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 432 - 432
1 Nov 2011
Takahashi Y Pezzotti G Kakimoto A Hashimoto J Sugano N
Full Access

Multiaxial rotation of femoral component is generated in a wide range against UHMWPE tibial insert during ambulation or deep bending activities. Simultaneously, microscopic oscillation and twisting might accompany with such a wide-range motion.

Such a combined in-vivo kinetics is expected to bring more severe wear to the sliding surface of knee joint prostheses than that in a case of single macro-kinetics (i.e., that commonly reproduced by conventional wear simulators). In order to reproduce clinical surface degradation correctly and quantitatively in simulator tests, we have to consider microscopic motions at the joint bearing surfaces. The purpose of this study is to analyze the influence of the composite knee motion on wear using a non-destructive spectroscopic approach.

The crystalline phase in UHMWPE is pre-oriented in the tibial insert from the manufacturing process, but the orientation of crystalline lamellae is sensitive to mechanical loading. Therefore, the orientation of the crystalline lamellae on the surface of retrieved UHMWPE tibial inserts could reflect the local motions in vivo generated in the joint during ambulation. The visualization of (orthorhombic) crystalline lamellae might ultimately lead to the possibility of tracking back the wear history of the joint. In this study, polarized Raman spectroscopy was employed in order to non-destructively visualize the lamellar orientation in UHMWPE tibial inserts, which were retrieved after exposures in human body elapsing several years.

According to this Raman analysis and in comparison with an unused insert, the orientation of surface lamellae was found to have been clearly changed due to wear in accordance to the local motion of the femoral component. Additionally, we could obtain information about the origin of delamination from the in-depth profile for lamellae orientation angle. This study not only shows the possibility of optimizing the UHMWPE structure to minimize wear but also gives a hint for the development of knee simulators of the next generation.