Advertisement for orthosearch.org.uk
Results 1 - 2 of 2
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_III | Pages 312 - 312
1 Mar 2004
Mark F Ondrovic L Kumar A Lee W Gutierrez S
Full Access

Aims: There are multiple proximal prosthetic geometries for humeral head replacement for treatment of four-part proximal humerus fractures. We compared four proximal prosthetic geometries in stable and unstable fracture patterns with a standard tuberosity þxation method. Methods: Twelve synthetic shoulders and 4 cadaver shoulders had a simulated four-part fracture created with an oscillating saw. The following proximal prosthetic geometries were used: smooth circular shape (SCS), diamond shape (DS), irregular multiple þn shape (IMFS), and IMFS with deeper þns (IMSDF). A standardized þxation method using vertical sutures, horizontal sutures and medial based cerclage straps was performed. Passive motion from 0–45 degrees was carried out using a robotic articulator at a rate of 10 degrees per second. Interfragmentary displacement was measured from tuberosity to tuberosity as well as tuberosity to the shaft using mercury strain gauges. This was repeated for stable and unstable fracture patterns. Results: When comparing interfragmentary motion between the four different geometries the greatest amount of motion occurred with the SCS in a stable fracture (0.69mm, p< 0.0001) and unstable fracture (0.71 mm, p< 0.0001). The geometry that provided the most stability was the IMFSDF in stable (0.08mm) and unstable (0.09 mm) fracture patterns. Conclusion: The geometry of the prosthetic device does affect the stability of the tuberosity reconstruction. A smooth circular prosthetic design in a stable or unstable fracture pattern does not prevent excessive interfragmentary motion, while an irregular multiple þn shaped prosthesis with deep þns augments the þxation construct even in an unstable fracture pattern.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_I | Pages 9 - 10
1 Jan 2004
Frankle M Ondrovic L Kumar A Harris L Lee W Gutierrez S
Full Access

There are multiple proximal prosthetic geometries available for a surgeon to select when humeral head replacement is indicated for four-part proximal humerus fractures. We compared different proximal prosthetic geometries in stable and unstable fracture patterns, with a standard tuberosity fixation method.

Simulated four-part fractures were created with an oscillating saw in six synthetic shoulder models. Three different proximal prosthetic geometries used polymetylmethacrelate (PMMA) – a smooth circular shape (SCS), a diamond shape (DS) and an irregular multiple fin shape (IMFS) prostheses. A standardised fixation method using vertical, and horizontal straps along with a medial based cerclage strap was performed. Passive motion was then carried out using a robotic articulator. Interfragmentary displacement was measured from tuberosity to tuberosity as well as tuberosity to shaft using mercury strain gauges.

The least amount of interfragmentary motion occurred when an IMFS was used in a stable fracture pattern. This geometry provided more interfragmentary stability even with the unstable fracture pattern than the DS or SCS. The least stable construct was the SCS prosthesis with an unstable fracture pattern.

Prosthetic geometry does affect stability of tuberosity reconstruction in proximal humerus fractures. An irregular shaped prosthesis augments the fixation construct. When using a smooth prosthetic design a stable fracture pattern must be achieved to prevent excessive interfragmentary motion. A smooth prosthetic design for tuberosity reconstruction is not recommended.