Advertisement for orthosearch.org.uk
Results 1 - 2 of 2
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 560 - 560
1 Nov 2011
Varin D Speirs A Benoit D Beaulieu M Lamontagne M Beaulé PE
Full Access

Purpose: A functional centre of rotation (CoR) is often required in biomechanical analysis of the hip or as a landmark in computer guided surgery. It was previously shown that circumduction motions predict a CoR that is inferior and lateral to the geometric centre of the hip bearing surfaces. It is therefore necessary to establish the best method for determining the CoR to improve surgical planning. The objective of this study was to compare the predicted CoR from circumduction and star motions, and to compare these to the geometric centre of the joint.

Method: Eight cadaveric hips from four cadavers were tested. Prior to testing, CT scans of the cadavers were made from the iliac crest to the tibial plateau; the alpha angle for all hips was less than 50° so all hips were considered ‘normal’. Reflective marker arrays were rigidly mounted on the femoral diaphysis and iliac spine using 4mm Steinman pins. A five-camera Vicon system (Oxford, UK) was used to track the motions of the arrays during manipulation of the lower limb. To determine the functional hip centre, trials consisting of five cycles each of circumduction, flexion-extension and abduction-adduction were performed on each lower limb; three trials of each motion were performed. The range of motion was approximately 45° in the coronal and sagittal planes. For the ‘star’ motion, the flexion-extension and abduction-adduction trial data were combined. Following the trials the hip was dissected to expose the articular surfaces of the femoral head and acetabulum. These surfaces were traced using a pointer equipped with reflective markers to determine the geometric centre. To calculate the functional centre, the 3D coordinates of the markers were used to construct a local-to-global 3D transform for each frame throughout the trial. The geometric centre was calculated using a least-squares sphere fit (Gauss-Newton) of the trace data, calculated in the respective local coordinate systems. The coordinates of the functional centres were then transformed to an anatomic coordinate system, using the geometric centre as the origin. All calculations were performed using Matlab (Mathworks, Inc, MA, USA). A t-test was performed in each anatomic direction to detect differences in CoR predicted by the two motions.

Results: Both the circumduction and star motions resulted in a similar CoR. Differences were 0.41±2.25mm in the anterior-posterior direction; 0.09±0.72mm in the superior-inferior direction; and 0.21±0.82mm in the medial-lateral direction, none of which were significant (p> 0.5). The overall mean distance between the CoR predicted by the two motions was 2.0±1.3mm. The functional centre was also found to be lateral and inferior to the geometric centre, and was consistent for each motion. Results for the acetabulum showed similar trends.

Conclusion: This study has shown that circumduction and star motions are equivalent in predicting the hip functional CoR; differences were small compared to the dimensions involved in studies such as gait analyses. However, both motions predicted a CoR that was inferior and lateral to the spherical centre of the femoral head, suggesting that the hip does not act as a true ball-and-socket joint with congruent spherical bearing surfaces. This may have important consequences in studies at the scale of the hip joint, especially for pathological conditions such as femoroacetabular impingement.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 555 - 555
1 Nov 2011
Varin D Lamontagne M Beaulieu M Beaulé PE
Full Access

Purpose: It is thought that the anterior approach better restores gait mechanics after total hip arthroplasty (THA) being a pure intermuscular/internervous approach. The purpose of this study was to compare three-dimensional (3-D) kinematics and kinetics of THA patients that had an anterior (ANT) vs. a lateral (LAT) approach. It is hypothesized that the ANT group will exhibit fewer differences than the LAT group when compared to a control group (CON).

Method: Fifty-four participants were divided into three groups of 18: ANT (12 women, 6 men; age: 60.9 ± 6.2 yr; BMI: 28.8 ± 4.9 kg/m2), LAT (10 women, 8 men; age: 65.2 ± 6.3 yr; BMI: 27.5 ± 5.1 kg/m2) and CON (9 women, 9 men; age: 63.9 ± 4.4 yr; BMI: 25.4 ± 3.2 kg/ m2). All THA patients had primary unilateral THA due to osteoarthritis and had no other lower-limb pathology. They were evaluated five to 17 months after surgery. 3-D kinematics and kinetics were obtained using a nine-camera motion analysis system and a force platform placed on the first step of a staircase. Each participant performed three trials of stair ascending. A series of one-way ANOVAs were used to compare peak angles, range of motion (ROM), peak resultant joint forces as well as moments and powers of the hip, knee and ankle joints in all three planes.

Results: Most differences occurred during transitions between double- to single-legged stance. Both LAT and ANT groups ascended the staircase with a more abducted hip than the CON group, resulting in reduced hip abduction moment. This could be the result of the implant’s position and its potential abductor lever arm reduction. Both groups also showed reduced peak internal rotation moments. These results have previously been found in THA patients who have been operated through lateral and posterior approaches, and are thought to be caused by hip abductor muscle damage inherent to the surgical approach. However, only the LAT group had lower compression forces at the hip, knee and ankle joints compared to the CON group. This indicates that LAT group uses a strategy that reduces the loading on the operated leg, which may be due to the detachment of the anterior third of the gluteus medius. It could be speculated that the muscle sparing aspect of ANT approach allows patients to load adequately their operated leg, even if their frontal plane kinematics and kinetics are altered.

Conclusion: Some studies have failed to find differences with the anterior approach. However, they have only looked at spatiotemporal gait parameters. 3-D kinematics and kinetics can provide a more detailed assessment of function and detect more subtle differences. In this study, 3-D biomechanical analysis has detected differences in THA patients operated through different surgical approaches during stair ascent. The data obtained showed similar frontal plane kinematics for both groups, but different lower-limb compression forces. This study supports the use of the anterior approach for better restoration of function after total hip arthroplasty.