Aims. Bone is a common site of metastatic disease. Skeletal complications include disabling pain and pathological fractures. Palliative surgery for incurable metastatic bone lesions aims to preserve quality of life and function by providing pain relief and stable mobility with fixation or replacement. Current literature has few treatment studies. We present a 5 year longitudinal cohort study of surgery for metastatic bone disease at our large teaching hospital reviewing our complication and mortality rates. Methods. Patients that underwent palliative surgery for metastatic bone lesions were identified from operative records. Demographics, clinical details and outcomes were recorded. Kaplan-Meier analysis was used to calculate survivorship. Results. 43 patients were treated for 44 bone metastases (34 IM Nails, 9 prosthetic replacements, 1 plate). The median age at primary diagnosis was 66 (33–92). Lung cancer was the most common primary. 56% presented with complete fractures and 44% with impending fractures (median Mirel score of 10). Pertrochanteric bone lesions were the most common (74%). Two out of 43 patients died within one day of surgery. 30 day mortality was 12% and 45% at 1 year. In those surviving the 30 day perioperative period, we report a complication rate of 14%. One patient had a dislocated prosthesis. Two patients had delayed or non union and two patients had failure of metalwork. No patient required re operation. Conclusion. Our series observed a 5% fixation failure rate and significant perioperative mortality. Whilst surgery may offer benefit in the non moribund patient with pathological fracture the decision to offer prophylactic surgery is more difficult in light of the high perioperative mortality seen in our study. Indeed, the patients in our study who died within 24 hours of surgery had prophylactic fixations. We conclude that surgical intervention must be carefully considered with realistic expectations of outcomes

Prophylactic treatment is advised for metastatic bone disease patients with a high risk of fracture. Clinicians face the task of identifying these patients with high fracture risk and determining the optimal surgical treatment method. Subject-specific finite element (FE) models can aid in this decision process by predicting the mechanical effect of surgical treatment. In this study, we specifically evaluated the potential of FE models to simulate femoroplasty, as uncertainty remains whether this prophylactic procedure provides sufficient mechanical strengthening to the weight-bearing femur.

In eight pairs of human cadaveric femurs artificial metastatic lesions were created. In each pair, an identical defect was milled in the left and right femur. Four pairs received a spherical lesion in the neck and the other four an ellipsoidal lesion in the intertrochanteric region, each at the medial, superior/lateral, anterior and posterior side, respectively. One femur of each pair was augmented with polymethylmethacrylate (5–10 ml), while the contralateral femur was left untreated. CT scans were made at three different time points: from the unaffected intact femurs, the defect femurs with lesion and the augmented femurs. Bone strength was measured by mechanical testing until failure in eight defect and eight augmented femurs. Nonlinear CT-based FE models were developed and validated against the experimentally measured bone strength. Subsequently, the validated FE model was applied to the available CT scans for the three different cases: intact (16 scans), defect (16) and augmented (8). The FE predicted strength was compared for the three different cases.

The FE models predicted the experimental bone strength with a strong correspondence, both for the defect (R² = 0.97, RMSE= 0.75 kN) and the augmented femurs (R² = 0.90, RMSE = 0.98 kN). Although all lesions had a “moderate” to “high” risk for fracture according to the Mirels’ scoring system (score 7 or 8), three defect femurs did not fracture through the lesion (intertrochanteric anterior, lateral and posterior), indicating that these lesions did not act as a critical weak spot. In accordance with the experimental findings, the FE models indicated almost no reduction in strength between the intact and defect state for these femurs (0.02 ± 0.1%). For the remaining “critical” lesions, bone strength was reduced with 15.7% (± 14.9%) on average. The largest reduction was observed for lesions on the medial side (up to 43.1%). For the femurs with critical lesions, augmentation increased bone strength with 29.5% (± 29.7%) as compared to the defect cases, reaching strength values that were 2.5% (± 3.7%) higher than the intact bone strength.

Our findings demonstrate that FE models can accurately predict the experimental bone strength before and after augmentation, thereby enabling to quantify the mechanical benefit of femoroplasty. This way FE models could aid in identifying suitable patients for whom femoroplasty provides sufficient increase in strength. For all lesions evaluated in this study, femoroplasty effectively restored the initial bone strength. Yet, additional studies on larger datasets with a wide variation of lesion types are required to confirm these results.

Decreasing the chance of local relapse or infection after surgical excision of bone metastases is a main goals in orthopedic oncology. Indeed, bone metastases have high incidence rate (up to 75%) and important cross-relations with infection and bone regeneration. Even in patients with advanced cancer, bone gaps resulting from tumor excision must be filled with bone substitutes. Functionalization of these substitutes with antitumor and antibacterial compounds could constitute a promising approach to overcome infection and tumor at one same time. Here, for the first time, we propose the use of nanostructured zinc-bone apatite coatings having antitumor and antimicrobial efficacy. The coatings are obtained by Ionized Jet Deposition from composite targets of zinc and bovine-derived bone apatite. Antibacterial and antibiofilm efficacy of the coatings is demonstrated in vitro against S. Aureus and E. Coli. Anti-tumor efficacy is investigated against MDA- MB-231 cells and biocompatibility is assessed on L929 and MSCs. A microfluidic based approach is used to select the optimal concentration of zinc to be used to obtain antitumor efficacy and avoid cytotoxicity, exploiting a custom gradient generator microfluidic device, specifically designed for the experiments. Then, coatings capable of releasing the desired amount of active compounds are manufactured. Films morphology, composition and ion-release are studies by FEG- SEM/EDS, XRD and ICP. Efficacy and biocompatibility of the coatings are verified by investigating MDA, MSCs and L929 viability and morphology by Alamar Blue, Live/Dead Assay and FEG-SEM at different timepoints. Statistical analysis is performed by SPSS/PC + Statistics TM 25.0 software, one-way ANOVA and post-hoc Sheffe? test. Data are reported as Mean ± standard Deviation at a significance level of p <0.05. Results and Discussion. Coatings have a nanostructured surface morphology and a composition mimicking the target. They permit sustained zinc release for over 14 days in medium. Thanks to these characteristics, they show high antibacterial ability (inhibition of bacteria viability and adhesion to substrate) against both the gram + and gram – strain. The gradient generator microfluidic device permits a fine selection of the concentration of zinc to be used, with many potential perspectives for the design of biomaterials. For the first time, we show that zinc and zinc-based coatings have a selective efficacy against MDA cells. Upon mixing with bone apatite, the efficacy is maintained and cytotoxicity is avoided. For the first time, new antibacterial metal-based films are proposed for addressing bone metastases and infection at one same time. At the same time, a new approach is proposed for the design of the coatings, based on a microfluidic approach. We demonstrated the efficacy of Zn against the MDA-MB-231 cells, characterized for their ability to form bone metastases in vivo, and the possibility to use nanostructured metallic coatings against bone tumors. At the same time, we show that the gradient-generator approach is promising for the design of antitumor biomaterials. Efficacy of Zn films must be verified in vivo, but the dual-efficacy coatings appear promising for orthopedic applications

Primary bone tumors are rare, complex and highly heterogeneous. Its diagnostic and treatment are a challenge for the multidisciplinary team. Developments on tumor biomarkers, immunohistochemistry, histology, molecular, bioinformatics, and genetics are fundamental for an early diagnosis and identification of prognostic factors. The personalized medicine allows an effective patient tailored treatment. The bone biopsy is essential for diagnosis. Treatment may include systemic therapy and local therapy. Frequently, a limb salvage surgery includes wide resection and reconstruction with endoprosthesis, biological or composites. The risk for local recurrence and distant metastases depends on the primary tumor and treatment response. Cancer patients are living longer and bone metastases are increasing. Bone is the third most frequently location for distant lesions. Bone metastases are associated to pain, pathological fractures, functional impairment, and neurological deficits. It impacts survival and patient quality of life. The treatment of metastatic disease is a challenge due to its complexity and heterogeneity, vascularization, reduced size and limited access. It requires a multidisciplinary treatment and depending on different factors it is palliative or curative-like treatment. For multiple bone metastases it is important to relief pain and increases function in order to provide the best quality of life and expect to prolong survival. Advances in nanotechnology, bioinformatics, and genomics, will increase biomarkers for early detection, prognosis, and targeted treatment effectiveness. We are taking the leap forward in precision medicine and personalized care

Sarcomas generally metastasize to the lung, while extra-pulmonary metastases are rare. However, they may occur more frequently in certain histological sub-types. Bone metastases from bone and soft tissue sarcomas account for a significant number of extra-pulmonary disease. Resection of lung metastases is widely accepted as therapeutic option to improve the survival of oligometastatic patients but there is currently no literature supporting curative surgical management of sarcoma bone metastases. Most are treated on a case-by-case basis, following multidisciplinary tumour boards recommendations. One study reported some success in controlling bone metastases using radiofrequency ablation. Our goal was to assess the impact of curative resection of bone metastases from soft tissue and bone sarcomas on oncologic outcomes. Extensive review of literature was done to evaluate epidemiological and outcomes of bone metastases in sarcoma. We examined our prospective database for all cases of bone metastases from sarcoma treated with surgical resection between 1990 and 2016. Epidemiology, pathology, metastatic status upon diagnosis, type of secondary relapses and their treatments were recorded. Overall survival and disease-free survival were calculated and compared to literature. Thirty-five patients were included (18 men, 17 women) with a mean age of 46 years. Fifteen were soft tissue (STS) and 20 were bone (BS) sarcomas. Most STS were fibrosarcomas, leiomyosarcomas or UPS while chondrosarcomas and osteosarcomas were the most frequent BS. Nine (60%) STS were grade 3, 4 (27%) grade 2 and one grade 1 (3%). Eight (23%) were metastatic upon diagnosis (6 lungs, 3 bone). Treatment of the primary tumour included wide excision with reconstruction and (neo)-adjuvant therapies as required. Margins were negative in 32 cases and micro-positive in 3 cases. Amputation occurred in 6 (17%) cases. Primary lung metastases were treated by thoracotomy and primary bone metastases by wide excision. First relapse occurred in bone in 19 cases (54%), lungs and bone in 7 cases, 5 in lungs and 4 in soft-tissues. Lung metastases were treated by thoracotomy and chemotherapy in 3 cases, chemotherapy alone in the remaining cases. Bone metastases were treated by wide resection-reconstruction in 24 cases, extensive curettage in 4. Soft tissue relapses were re-excised in 4 patients. Two amputations were required. All margins were negative except for the 4 treated by curettage. Fourteen second relapses occurred in bone, 7 were radically-excised and 2 curetted. At last follow-up, 6 patients were alive (overall survival of 17%), with a mean survival of 57 months, a median overall survival of 42.5 months and a median disease-free survival (DFS) of 17 months. Overall survival was 17%, compared to an 11% 10-year survival previously reported in metastatic sarcomas. Median disease-free survival was better in this study, compared to 10 months in literature, so as median OS (42.5 months vs 15). Three patients were alive with no evidence of disease. DFS, OS and median survival seemed to be improved by bone metastases wide excision and even if several recurrences occur, curative surgery with adjuvant therapies should be considered

Patients with cancer and bone metastases can have an increased risk of fracturing their femur. Treatment is based on the impending fracture risk: patients with a high fracture risk are considered for prophylactic surgery, whereas low fracture risk patients are treated conservatively with radiotherapy to decrease pain. Current clinical guidelines suggest to determine fracture risk based on axial cortical involvement of the lesion on conventional radiographs, but that appears to be difficult. Therefore, we developed a patient-specific finite element (FE) computer model that has shown to be able to predict fracture risk in an experimental setting and in patients. The goal of this study was to determine whether patient-specific finite element (FE) computer models are better at predicting fracture risk for femoral bone metastases compared to clinical assessments based on axial cortical involvement on conventional radiographs, as described in current clinical guidelines. 45 patients (50 affected femurs) affected with predominantly lytic bone metastases who were treated with palliative radiotherapy for pain were included. CT scans were made and patients were followed for six months to determine whether or not they fractured their femur. Non-linear isotropic FE models were created with the patient-specific geometry and bone density obtained from the CT scans. Subsequently, an axial load was simulated on the models mimicking stance. Failure loads normalized for bodyweight (BW) were calculated for each femur. High and low fracture risks were determined using a failure load of 7.5 × BW as a threshold. Experienced assessors measured axial cortical involvement on conventional radiographs. Following clinical guidelines, patients with lesions larger than 30 mm were identified as having a high fracture risk. FE predictions were compared to clinical assessments by means of diagnostic accuracy values (sensitivity, specificity and positive (PPV) and negative predictive values (NPV)). Seven femurs (14%) fractured during follow-up. Median time to fracture was 8 weeks. FE models were better at predicting fracture risk in comparison to clinical assessments based on axial cortical involvement (sensitivity 100% vs. 86%, specificity 74% vs. 42%, PPV 39% vs. 19%, and NPV 100% vs. 95%, for the FE computer model vs. axial cortical involvement, respectively). We concluded that patient-specific FE computer models improve fracture risk predictions of femoral bone metastases in advanced cancer patients compared to clinical assessments based on axial cortical involvement, which is currently used in clinical guidelines. Therefore, we are initiating a pilot for clinical implementation of the FE model

The aim was to analyze the efficacy of zoledronic acid (ZA) versus denosumab in the prevention of pathological fractures in patients with bone metastases from advanced cancers by evaluating all available randomized controlled trials (RCTs) on this subject. A systematic search of electronic databases (PubMed and MEDLINE) was performed to identify all published RCTs comparing zoledronic acid with denosumab in prevention of pathological fractures in bone metastases. Risk of bias of the studies was assessed. The primary outcomes evaluated were pathological fractures. Four RCTs (7320 patients) were included. Denosumab was superior to ZA in reducing the likelihood of pathological fractures, when all tumour types were combined (OR 0.86, 95% CI [0.74, 0.99], p = 0.04). Denosumab was not significantly favoured over ZA in endodermal origin (breast and prostate) (OR 0.85, 95% CI [0.68, 1.05], p = 0.13) and mesodermal origin tumours (solid tumours and MM) (OR 0.87, 95% CI [0.71, 1.06], p = 0.16). Denosumab significantly reduces the likelihood of pathological fractures in comparison to ZA in patients with bone metastases. When pathological fractures were grouped by tumour origin (endodermal or mesodermal), there was no significant difference between denosumab and ZA. Further long-term studies are needed to confirm the effectiveness of these treatment regimens

Patients with advanced cancer can develop bone metastases in the femur which are often painful and increase the risk of pathological fracture. Accurate segmentation of bone metastases is, amongst others, important to improve patient-specific computer models which calculate fracture risk, and for radiotherapy planning to determine exact radiation fields. Deep learning algorithms have shown to be promising to improve segmentation accuracy for metastatic lesions, but require reliable segmentations as training input. The aim of this study was to investigate the inter- and intra-operator reliability of manual segmentation of femoral metastatic lesions and to define a set of lesions which can serve as a training dataset for deep learning algorithms. F. CT-scans of 60 advanced cancer patients with a femur affected with bone metastases (20 osteolytic, 20 osteoblastic and 20 mixed) were used in this study. Two operators were trained by an experienced radiologist and then segmented the metastatic lesions in all femurs twice with a four-week time interval. 3D and 2D Dice coefficients (DCs) were calculated to quantify the inter- and intra-operator reliability of the segmentations. We defined a DC>0.7 as good reliability, in line with a statistical image segmentation study. Mean first and second inter-operator 3D-DCs were 0.54 (±0.28) and 0.50 (±0.32), respectively. Mean intra-operator I and II 3D-DCs were 0.56 (±0.28) and 0.71 (±0.23), respectively. Larger lesions (>60 cm. 3. ) scored higher DCs in comparison with smaller lesions. This study reveals that manual segmentation of metastatic lesions is challenging and that the current manual segmentation approach resulted in dissatisfying outcomes, particularly for lesions with small volumes. However, segmentation of larger lesions resulted in a good inter- and intra-operator reliability. In addition, we were able to select 521 slices with good segmentation reliability that can be used to create a training dataset for deep learning algorithms. By using deep learning algorithms, we aim for more accurate automated lesion segmentations which might be used in computer modelling and radiotherapy planning

Vertebral metastases are the most common type of malignant lesions of the spine. Although this tumour is still considered incurable and standard treatments are mainly palliative, the standard approach consists in surgical resection, which results in the formation of bone gaps. Hence, scaffolds, cements and/or implants are needed to fill the bone lacunae. Here, we propose a novel approach to address spinal metastases recurrence, based on the use of anti-tumour metallic-based nanostructured coatings. Moreover, for the first time, a gradient microfluidic approach is proposed for the screening of nanostructured coatings having anti-tumoral effect, to determine the optimal concentration of the metallic compound that permits selective toxicity towards tumoral cells. Coatings are based on Zinc as anti-tumour agent, which had been never explored before for treatment of bone metastases. The customized gradient generating microfluidic chip was designed by Autodesk Inventor and fabricated from a microstructured mould by using replica moulding technique. Microstructured mould were obtained by micro-milling technique. The chip is composed of a system of microfluidic channels generating a gradient of 6 concentrations of drug and a compartment with multiple arrays of cell culture chambers, one for each drug concentration. The device is suitable for dynamic cultures and in-chip biological assays. The formation of a gradient was validated using a methylene blue solution and the cell loading was successful. Preliminary biological data on 3D dynamic cultures of stromal cells (bone-marrow mesenchymal stem cells) and breast carcinoma cells (MDA-MB-231) were performed in a commercial microfluidic device. Results showed that Zn eluates had a selective cytotoxic effect for tumoral cells. Indeed, cell migration and cell replication of treated tumoral cells was inhibited. Moreover, the three-dimensionality of the model strongly affected the efficacy of Zn eluates, as 2D preliminary experiments showed a high cytotoxic effect of Zn also for stromal cells, thus confirming that traditional screening tests on 2D cultured cells usually lead to an overestimation of drug efficacy and toxicity. Based on preliminary data, the customized platform could be considered a major advancement in cancer drug screenings as it also allows the rapid and efficient screening of biomaterials having antitumor effect

Bone metastases radiographically appear as regions with high (i.e. blastic metastases) or low (i.e. lytic metastases) bone mineral density. The clinical assessment of metastatic features is based on computed tomography (CT) but it is still unclear if the actual size of the metastases can be accurately detected from the CT images and if the microstructure in regions surrounding the metastases is altered (Nägele et al., 2004, Calc Tiss Int). This study aims to evaluate (i) the capability of the CT in evaluating the metastases size and (ii) if metastases affect the bone microstructure around them. Ten spine segments consisted of a vertebra with lytic or mixed metastases and an adjacent control (radiologically healthy) were obtained through an ethically approved donation program. The specimens were scanned with a clinical CT (AquilionOne, Toshiba: slice thickness:1mm, in-plane resolution:0.45mm) to assess clinical metastatic features and a micro-CT (VivaCT80, Scanco, isotropic voxel size:0.039mm) to evaluate the detailed microstructure. The volume of the metastases was measured from both CT and micro-CT images (Palanca et al., 2021, Bone) and compared with a linear regression. The microstructural alteration around the metastases was evaluated in the volume of interest (VOI) defined in the micro-CT images as the volume of the vertebral body excluding the metastases. Three 3D microstructural parameters were calculated in the VOI (CTAn, Bruker SkyScan): Bone Volume Fraction (BV/TV), Trabecular Thickness (Tb.Th.), Trabecular Spacing (Tb.Sp.). Medians of each parameter were compared (Kruskal-Wallis, p=0.05). One specimen was excluded as it was not possible to define the size of the metastases in the CT scans. A strong correlation between the volume obtained from the CT and micro-CT images was found (R2=0.91, Slope=0.97, Intercept=2.55, RMSE=5.7%, MaxError=13.12%). The differences in BV/TV, Tb.Th. and Tb.Sp. among vertebrae with lytic and mixed metastases and control vertebrae were not statistically significant (p-value>0.6). Similar median values of BV/TV were found in vertebrae with lytic (13.2±2.4%) and mixed (12.8±9.8%) metastases, and in controls (13.0±10.1%). The median Tb.Th. was 176±18 ∓m, 179±43 ∓m and 167±91 ∓m in vertebrae with lytic and mixed metastases and control vertebrae, respectively. The median Tb. Sp. was 846±26 ∓m, 849±286 ∓m and 880±116 ∓m in vertebrae with lytic and mixed metastases and control vertebrae, respectively. In conclusion, the size of vertebral metastases can be accurately assess using CT images. The 3D microstructural parameters measured were comparable with those reported in the literature for healthy vertebrae (Nägele et al., 2004, Calc Tiss Int, Sone et al., 2004, Bone) and showed how the microstructure of the bone tissue surrounding the lesion is not altered by the metastases

Infection in orthopedics is a challenge, since it has high incidence (rates can be up to 15-20%, also depending on the surgical procedure and on comorbidities), interferes with osseointegration and brings severe complications to the patients and high societal burden. In particular, infection rates are high in oncologic surgery, when biomedical devices are used to fill bone gaps created to remove tumors. To increase osseointegration, calcium phosphates coatings are used. To prevent infection, metal- and mainly silver-based coatings are the most diffused option. However, traditional techniques present some drawbacks, including scarce adhesion to the substrate, detachments, and/or poor control over metal ions release, all leading to cytotoxicity and/or interfering with osteointegration. Since important cross-relations exist among infection, osseointegration and tumors, solutions capable of addressing all would be a breakthrough innovation in the field and could improve clinical practice. Here, for the first time, we propose the use antimicrobial silver-based nanostructured thin films to simultaneously discourage infection and bone metastases. Coatings are obtained by Ionized Jet Deposition, a plasma-assisted technique that permits to manufacture films of submicrometric thickness having a nanostructured surface texture. These characteristics, in turn, allow tuning silver release and avoid delamination, thus preventing toxicity. In addition, to mitigate interference with osseointegration, here silver composites with bone apatite are explored. Indeed, capability of bone apatite coatings to promote osseointegration had been previously demonstrated in vitro and in vivo. Here, antibacterial efficacy and biocompatibility of silver-based films are tested in vitro and in vivo. Finally, for the first time, a proof-of-concept of antitumor efficacy of the silver-based films is shown in vitro. Coatings are obtained by silver and silver-bone apatite composite targets. Both standard and custom-made (porous) vertebral titanium alloy prostheses are used as substrates. Films composition and morphology depending on the deposition parameters are investigated and optimized. Antibacterial efficacy of silver films is tested in vitro against gram+ and gram- species (E. coli, P. aeruginosa, S. aureus, E. faecalis), to determine the optimal coatings characteristics, by assessing reduction of bacterial viability, adhesion to substrate and biofilm formation. Biocompatibility is tested in vitro on fibroblasts and MSCs and, in vivo on rat models. Efficacy is also tested in an in vivo rabbit model, using a multidrug resistant strain of S. aureus (MRSA, S. aureus USA 300). Absence of nanotoxicity is assessed in vivo by measuring possible presence of Ag in the blood or in target organs (ICP-MS). Then, possible antitumor effect of the films is preliminary assessed in vitro using MDA-MB-231 cells, live/dead assay and scanning electron microscopy (FEG-SEM). Statistical analysis is performed and data are reported as Mean ± standard Deviation at a significance level of p <0.05. Silver and silver-bone apatite films show high efficacy in vitro against all the tested strains (complete inhibition of planktonic growth, reduction of biofilm formation > 50%), without causing cytotoxicity. Biocompatibility is also confirmed in vivo. In vivo, Ag and Ag-bone apatite films can inhibit the MRSA strain (>99% and >86% reduction against ctr, respectively). Residual antibacterial activity is retained after explant (at 1 month). These studies indicate that IJD films are highly tunable and can be a promising route to overcome the main challenges in orthopedic prostheses

One out of nine Canadian males would suffer prostate cancer (PC) during his lifetime. Life expectancy of males with PC has increased with modern therapy and 90% live >10 years. However, 20% of PC-affected males would develop incurable metastatic diseases. Bone metastases (BM) are present in ~80% of metastatic PC patients, and are the most severe complication of PC, generating severe pain, fractures, spinal cord compression, and death. Interestingly, PC-BMs are mostly osteoblastic. However, the structure of this newly formed bone and how it relates to pain and fracture are unknown. Due to androgen antagonist treatment, different PC phenotypes develop with differential dependency on androgen receptor (AR) signaling: androgen-dependent (AR+), double negative (AR-) and neuroendocrine. How these phenotypes are related to changes in bone structure has not been studied. Here we show a state-of-the-art structural characterization of PCBM and how PC phenotypes are associated to abnormal bone formation in PCBM. Cadaveric samples (n=14) obtained from metastases of PC in thoracic or lumbar vertebrae (mean age 74yo) were used to analyze bone structure. We used micro-computed tomography (mCT) to analyze the three-dimensional structure of the bone samples. After imaging, the samples were sectioned and one 3mm thick section was embedded in epoxy-resin, ground and polished. Scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDS) and quantitative backscattering electron (qBSE) imaging were used to determine mineral morphology and composition. Another section was used for histological analysis of the PC-affected bone. Collagen structure, fibril orientation and extracellular matrix composition were characterized using histochemistry. Additionally, we obtained biopsies of 3 PCBM patients undergoing emergency decompression surgery following vertebral fracture and used them for immunohistological characterization. By using mCT, we observed three dysmorphic bone patterns: osteolytic pattern with thinned trabecula of otherwise well-organized structures, osteoblastic pattern defined as accumulation of disorganized matrix deposited on pre-existing trabecula, and osteoblastic pattern with minimum residual trabecula and bone space dominated by accumulation of disorganized mineralized matrix. Comparing mCT data with patho/clinical parameters revealed a trend for higher bone density in males with larger PSA increase. Through histological sections, we observed that PC-affected bone, lacks collagen alignment structure, have a higher number of lacunae and increased amount of proteoglycans as decorin. Immunohistochemistry of biopsies revealed that PC-cells inside bone organize into two manners: i) glandular-like structures where cells maintain their polarization in the expression of prostate markers, ii) diffuse infiltrate that spreads along bone surfaces, with loss of cell polarity. These cells take direct contact with osteoblasts in the surface of trabecula. We define that PCBM are mostly composed by AR+ with some double negative cells. We did not observe neuroendocrine phenotype cells. PCBMs generate predominantly osteoblastic lesions that are characterized by high lacunar density, lack of collagen organization and elevated proteoglycan content. These structural changes are associated with the infiltration of PC cells that are mostly androgen-dependent but have lost their polarization and contact directly with osteoblasts, perhaps altering their function. These changes could be associated with lower mechanical properties that led to fracture and weakness of the PCBM affected bone

Lung cancer is the most common cancer diagnosed, the leading cause of cancer-related deaths, and bone metastases occurs in 20–40% of lung cancer patients. They often present symptomatically with pain or skeletal related events (SREs), which are independently associated with decreased survival. Bone modifying agents (BMAs) such as Denosumab or bisphosphonates are routinely used, however no specific guidelines exist from the National Comprehensive Cancer Center or the European Society of Medical Oncologists. Perhaps preventing the formation of guidelines is the lack of a high-quality quantitative synthesis of randomized controlled trial (RCT) data to determine the optimal treatment for the patient important outcomes of 1) Overall survival (OS), 2) Time to SRE, 3) SRE incidence, and 4) Pain Resolution. The objective of this study was to perform the first systematic review and network meta-analysis (NMA) to assess the best BMA for treatment of metastatic lung cancer to bone. We conducted our study in accordance to the PRISMA protocol. We performed a librarian assisted search of MEDLINE, PubMed, EMBASE, and Cochrane Library and Chinese databases including CNKI and Wanfang Data. We included studies that are RCTs reporting outcomes specifically for lung cancer patients treated with a bisphosphonate or Denosumab. Screening, data extraction, risk of bias and GRADE were performed in duplicate. The NMA was performed using a Bayesian probability model with R. Results are reported as relative risks, odds ratios or mean differences, and the I2 value is reported for heterogeneity. We assessed all included articles for risk of bias and applied the novel GRADE framework for NMAs to rate the quality of evidence supporting each outcome. We included 132 RCTs comprising 11,161 patients with skeletal metastases from lung cancer. For OS, denosumab was ranked above zoledronic acid (ZA) and estimated to confer an average of 3.7 months (95%CI: −0.5 – 7.6) increased survival compared to untreated patients. For time to SRE, denosumab was ranked first with an average of 9.1 additional SRE-free months (95%CI: 4.0 – 14.0) compared to untreated patients, while ZA conferred an additional 4.8 SRE-free months (2.4 – 7.0). Patients treated with the combination of Ibandronate and systemic therapy were 2.3 times (95%CI: 1.7 – 3.2) more likely to obtain successful pain resolution, compared to untreated. Meta-regression showed no effect of heterogeneity length of follow-up or pain scales on the observed treatment effects. Heterogeneity in the network was considered moderate for overall survival and time to SRE, mild for SRE incidence, and low for pain resolution. While a generally high risk of bias was observed across studies, whether they were from Western or Chinese databases. The overall GRADE for the evidence underlying our results is High for Pain control and SRE incidence, and Moderate for OS and time to SRE. This study represents the most comprehensive synthesis of the best available evidence guiding pharmacological treatment of bone metastases from lung cancer. Denosumab is ranked above ZA for both overall survival and time to SRE, but both treatments are superior to no treatment. ZA was first among all bisphosphonates assessed for odds of reducing SRE incidence, while the combination of Ibandronate and radionuclide therapy was most effective at significantly reducing pain from metastases. Clinicians and policy makers may use this synthesis of all available RCT data as support for the use of a BMA in MBD for lung cancer

The spine is one of the most common sites of bony metastasis, with 80% of prostate, lung, and breast cancers metastasizing to the vertebrae resulting in significant morbidity. Current treatment modalities are systemic chemotherapy, such as Doxorubicin (Dox), administered after resection to prevent cancer recurrence, and systemic antiresorptive medication, such as Zolendronate (Zol), to prevent tumor-induced bone destruction. The large systemic doses required to elicit an adequate effect in the spine often leads to significant side-effects by both drugs, limiting their prolonged use and effectiveness. Recently published work by our lab has shown that biocompatible 3D-printed porous polymer scaffolds are an effective way of delivering Dox locally over a sustained period while inhibiting tumor growth in vitro. Our lab has also generated promising results regarding antitumor properties of Zol in vitro. We aim to develop 3D-printed scaffolds to deliver a combination of Zol and Dox that can potentially allow for a synergistic antitumor activity while preventing concurrent bone loss locally at the site of a tumor, avoiding long systemic exposure to these drugs and decreasing side effects in the clinical setting. The PORO Lay polymer filaments are 3D-printed into 5mm diameter disks, washed with deionized water and loaded with Dox or Zol in aqueous buffer over 7 days. Dox or Zol-containing supernatant was collected daily and the drug release was analyzed over time in a fluorescence plate reader. The polymer-drug (Dox or Zol) release was tested in vitro on prostate and lung cancer cell lines and on prostate- or lung-induced bone metastases cells. Alternatively, direct drug treatment was also carried out on the same cells in vitro. Following treatment, all cells were subject to proliferation assay (MTT and alamar blue), viability assay (LIVE/DEAD), migration assay (Boyden chamber) and invasion assay (3D gel matrix). 3D-printed scaffolds loaded with both Dox and Zol will also be tested on cells. We have established an effective dose (EC50) for prostate and lung cancer cell lines and bone metastases cells with direct treatment with Zol or Dox. We have titrated the drug loading of scaffolds to allow for a release amount of Dox at the EC50 dose over 7 days. In ongoing experiments, we are testing the release of Zol. We have shown Dox releasing scaffolds inhibit cancer cell growth in a 2D culture over 7 days using the above cellular assays and testing the scaffolds with Zol is currently being analyzed. 3D-printed porous polymers like the PORO Lay series of products offer a novel and versatile opportunity for delivery of drugs in future clinical settings. They can decrease systemic exposure of drugs while at the same time concentrating the drugs effect at the site of tumors and consequently inhibit tumor proliferation. Their ability to be loaded with multiple drugs can allow for achieving multiple goals while taking advantage of synergistic effects of different drugs. The ability to 3D-print these polymers can allow for production of custom implants that offer better structural support for bone growth

Bone metastases are common and severe complications of cancers. It is estimated to occur in 65–75% of breast and prostate cancer patients and cause 80% of breast cancer-related deaths. Metastasised cancer cells have devastating impacts on bone due to their ability to alter bone remodeling by interacting with osteoblasts and osteoclasts. Exercise, often used as an intervention for cancer patients, regulates bone remodeling via osteocytes. Therefore, we hypothesise that bone mechanical loading may regulate bone metastases via osteocytes. This provides novel insights into the impact of exercises on bone metastases. It will assist in designing cancer intervention programs that lowers the risk for bone metastases. Investigating the mechanisms for the observed effects may also identify potential drug targets. MLO-Y4 osteocyte-like cells (gift of Dr. Bonewald, University of Missouri-Kansas City) on glass slides were placed in flow chambers and subjected to oscillatory fluid flow (1Pa; 1Hz; 2 hours). Media were extracted (conditioned media; CM) post-flow. RAW264.7 osteoclast precursors were conditioned in MLO-Y4 CM for 7 days. Migration of MDA-MB-231 breast cancer cells and PC3 prostate cancer cells towards CM was assayed using Transwell. Viability, apoptosis, and proliferation of the cancer cells in the CM were measured with Fixable Viability Dye eFluor 450, APOPercentage, and BrDu, respectively. P-values were calculated using Student's t-test. Significantly more MDA-MB-231 and PC3 cells migrated towards the CM from MLO-Y4 cells with exposure to flow in comparison to CM from MLO-Y4 cells not exposed to flow. The preferential migration is abolished with anti-VEGF antibodies. MDA-MB-231 cells apoptosis rate was slightly lower in CM from MLO-Y4 cells exposed to flow, while proliferation rate was slightly higher. The current data showed no difference in cancer cells viability and adhesion to collagen between any two groups. On the other hand, it was observed that less MDA-MB-231 cells migrated towards CM from RAW264.7 cells conditioned in CM from MLO-Y4 cells stimulated with flow in comparison to those conditioned in CM from MLO-Y4 cells not stimulated with flow. TRAP staining results confirmed that there were less differentiated osteoclasts when RAW264.7 cells were cultured in CM from MLO-Y4 cells exposed to flow. Overall, this study suggests that when only osteocytes and cancer cells are involved, osteocytes subjected to mechanical loading can promote metastases due to the increased secretion of VEGF. However, with the incorporation of osteoclasts, mechanical loading on osteocytes seems to reduce MDA-MB-231 cell migration. This is likely because osteocytes reduce osteoclastogenesis in response to mechanical stimulation, and osteoclasts have been shown to support cancer cells. Animal studies will also be conducted to verify the pro- or anti-metastatic effect of mechanical loading that is observed in the in vitro part of this study

Breast and other cancers commonly metastasize to bone to cause bone destruction, pain, fractures hypercalcemia and muscle weakness. Recently, we described a specific molecular mechanism by which bone-derived transforming growth factor (TGF)-beta, released as a consequence of tumor-induced bone destruction causes muscle dysfunction, before the loss of muscle mass. Circulating TGF-beta induces oxidation of the ryanodine receptor (RYR1) on the sarcoplasmic reticulum of skeletal muscle to induce calcium leak and muscle weakness. Blocking TGF-beta, or its release from bone (with bisphosphonates), preventing oxidation of or stabilizing RyR1 all prevented muscle weakness in mouse models of breast cancer bone metastases. In addition to these effects on skeletal muscle, circulating TGF-beta may act on beta cells of the pancreas to impair insulin secretion and result in glucose intolerance. These and other potential systemic effects of TGF-beta released from the tumor-bone microenvironment or from cancer treatment-induced bone destruction implicate bone as a major source of systemic effects of cancer and cancer treatment. Therapy to block the systemic effects of the bone microenvironment will improve morbidity associated with bone metastases and cancer treatment

Aim. To present selective arterial embolization with N-2-butyl Cyanoacrylate for the palliative and/or adjuvant treatment of painful bone metastases not primarily amenable to surgery. Material and Methods. From January 2003 to December 2009, 243 patients (148 men and 95 women; age range, 20–87 years) with painful bone metastases were treated with N-2-butyl Cyanoacrylate. Overall, 309 embolizations were performed; 56 patients had more than one embolization. Embolizations were performed in the pelvis (168 procedures), in the spine (83 procedures), in the upper limb (13 procedures), in the lower limb (38 procedures) and in the thoracic cage (21 procedures). Primary cancer included urogenital, breast, gastrointestinal, thyroid, lung, musculoskeletal, skin, nerve and unknown origin. Renal cell carcinoma was the most commonly treated tumor. In all patients, selective embolization was performed by transfemoral catheterization. Results. Complete or significant resolution of pain for more than 6 months was observed in 236 patients (97%), in 56 of them (23%) after repeated embolization; 12 patients had subsequent surgical treatment. Function was restored to normal in the patients with extremity tumors. In 21 cases, after angiography embolization was judged infeasible due to arteriovascular reasons or high risk. Skin and subcutaneous necrosis at the pelvis occurred in one patient after multiple embolizations for a metastatic paraganglioma. Conclusions. Selective embolization of bone metastases with N-2-butyl Cyanoacrylate is safe and effective for the palliative and/or adjuvant management of painful bone metastases. It can be used for surgically inaccessible or irresponsive to radiation therapy lesions, and as an adjuvant to surgical treatment

Aim. To present selective arterial embolization with N-2-butyl Cyanoacrylate for the palliative and/or adjuvant treatment of painful bone metastases not primarily amenable to surgery. Material and Methods. From January 2003 to December 2009, 243 patients (148 men and 95 women; age range, 20-87 years) with painful bone metastases were treated with N-2-butyl Cyanoacrylate. Overall, 309 embolizations were performed;. 56 patients had more than one embolization. Embolizations were performed in the pelvis (168 procedures), in the spine (83 procedures), in the upper limb (13 procedures), in the lower limb (38 procedures) and in the thoracic cage (21 procedures). Primary cancer included urogenital, breast, gastrointestinal, thyroid, lung, musculoskeletal, skin, nerve and unknown origin. Renal cell carcinoma was the most commonly treated tumour. In all patients, selective embolization was performed by transfemoral catheterization. Results. Complete or significant resolution of pain for more than 6 months was observed in 236 patients (97%), in 56 of them (23%) after repeated embolization; 12 patients had subsequent surgical treatment. Function was restored to normal in the patients with extremity tumours. In 21 cases, after angiography embolization was judged infeasible due to arteriovascular reasons or high risk. Skin and subcutaneous necrosis at the pelvis occurred in one patient after multiple embolizations for a metastatic paraganglioma. Conclusions. Selective embolization of bone metastases with N-2-butyl Cyanoacrylate is safe and effective for the palliative and/or adjuvant management of painful bone metastases. It can be used for surgically inaccessible or irresponsive to radiation therapy lesions, and as an adjuvant to surgical treatment

Bone metastases are the most common cause of cancer-related pain and often lead to other complications such as pathological fractures and spinal cord compression. Bisphosphonates (BP) are a class of potent anti-resorptive agents commonly prescribed to retard osteoporosis progression. Interestingly, BP may have indirect anti-tumour properties through negative effects on macrophages, osteoclasts, endothelial cells and their ability to suppress matrix metalloproteinase (MMP) activity. Currently, the use of bisphosphonates for cancer therapy is generally restricted to high dose systemic delivery. The purpose of this study was to investigate the effects of direct local delivery of Zoledronate at the metastatic site in a mouse model of breast cancer metastasis to bone. Seven days following intra-tibial inoculation with MDA-MB-231 (N = 1× 105) breast cancer cells in athymic mice, the experimental group (N = 11) was treated by direct infusion of 2µg of Zoledronate into the tibial lesion (three times/week for three weeks) and compared to vehicle-treated mice (N = 5). The formation of bone metastases and growth of the lesions were followed up by weekly bioluminescence imaging. In a subsequent experiment, a comparison of the effects of local versus systemic delivery of Zoledronate on the formation of osteolytic bone metastases was carried in athymic mice (N = 15). Seven days following intra-tibial inoculation with MDA-MB-231 breast cancer cells, the systemic group (N = 5) was treated with Zoledronate (0.025mg/kg) once per week for four weeks and compared to systemic delivery of vehicle (N = 4). Following treatment, the mice were sacrificed, and micro-CT images of the right tibia were obtained. Bone volume to tissue volume ratio (BV/TV%) was determined using µ-CT biomarkers. The first experiment showed a statistically significant increase in mean bone volume/tissue volume ratio% (BV/TV%) in the treated group (7.0±1.54%) as compared to the control group (3.8±0.48%) (P <0.001, 95%CI=1.9–4.3). This corresponded to a net increase of 84.21% in response to Zoledronate treatment. Comparison between the local and systemic effects of Zoledronate also revealed a significant increase in the BV/TV% in the locally treated group (6.69±0.62%) when compared to the cohort administered systemic bisphosphonate treatment (4.03±0.44%) (P<0.001, 95%CI=1.24–3.20), corresponding to a net increase of 66.0%. These preliminary results suggest that high dose sustained release of Zoledronate can lead to a significant inhibition of tumor-induced osteolysis. Moreover, comparison between local and systemic delivery revealed that the effect of local bisphosphonate administration exceeds the benefits of systemic delivery in terms of osteolysis inhibition. Lastly, the noted effects of Zoledronate local delivery triggers the need for further assessment of its anti-tumour activity

The histological findings from the heads of femur or bone biopsy taken from 90 patients with suspected pathological fractures of the femoral neck were studied to determine the rates of significant abnormal pathological findings.The mean age at the time of fracture was 80.41 years (44–99). 29 patients were males and 71 females. The patients were divided into four groups. Group I: 34 patients with fracture without history of fall or trauma. Group II: 21 patients with suspicious radiology of pelvis. Group III: 27 patients with past history of malignancy without known bone metastases. Group IV: 8 patients with past history of malignancy and known bone metastases. None of the patients in groups I and II had significant abnormalities other than osteoporosis. 4 patients (15%) in group III had metastases and 6 patients (75%) in group IV had metastases on histological examination. We conclude that the absence of history of fall or trauma or subtle radiographic findings in patients with fracture of the neck of the femur is usually not associated with sinister pathology and the cause of fracture in these patients is often osteoporosis. Patients with previous history of malignancy without known bone metastases have a 15% risk of finding of metastatic disease even in the absence of radiological abnormalities. Patients with fractured neck of femur with past history of malignancy and who are known to have bone metastases must be considered as having pathological fractures through metastatic disease until unless proven otherwise