Aims

The aim of this study was to compare the preinjury functional scores with the postinjury preoperative score and postoperative outcome scores following anterior cruciate ligament (ACL) reconstruction surgery (ACLR).

The aim of the this study was to determine the effect of the knee flexion angle (KFA) during tibial anterior cruciate ligament (ACL) graft fixation on patient reported outcomes, graft stability, extension loss and re-operation following anatomic single-bundle ACL reconstruction. All 169 included patients (mean age 28.5 years, 65% male) were treated with anatomic single bundle ACL reconstruction using patellar tendon autograft and randomized to tibial fixation of the ACL graft at either 0o (n=85) or 30o (n=84). The primary outcome was the Knee Injury and Osteoarthritis Outcome Score (KOOS) two years following surgery. Secondary outcomes were the Marx Activity Scale (MAS), the rate of re-operation, and physical exam findings at one year including KT-1000 and side to side differences in knee extension. The follow-up rate was 82% (n=139) for the primary outcome. Graft failure rate at two years was 1% (n=2, 1 per group). ACL tibial graft fixation at 0o or 30o did not have a significant effect on KOOS scores at two years following ACLR. Patients whose graft was fixed at a knee flexion angle of 0o had greater scores on the Marx Activity Scale (mean 9.6 [95%CI 8.5-10.6] versus 8.0 [95%CI 6.9-9.1, p=0.04) and a greater proportion of patients who achieved the minimal clinical important difference (MCID) for the KOOS pain subscale (94% vs 81%, p=0.04). There was no significant difference in knee extension loss, KT-1000 measurements or re-operation between the two groups. In the setting of anatomic single-bundle ACLR using patellar tendon autograft and anteromedial portal femoral drilling, there was no difference in KOOS scores among patients fixed at 0o and 30o. Patient fixed in full extension did demonstrate higher activity scores at 2 years following surgery and a greater likelihood of achieving the MCID for KOOS pain

The purpose of this study was to determine the incidence of graft-tunnel mismatch (GTM) when performing anatomic anterior cruciate ligament reconstruction (ACLR) using bone-patella tendon-bone (BPTB) grafts and anteromedial portal drilling. Beginning in November 2018, 100 consecutive patients who underwent ACLR by two sports fellowship-trained, orthopedic surgeons using BPTB autograft and anteromedial portal drilling were prospectively identified. The BPTB graft dimensions and the femoral tunnel distance, tibial tunnel distance, intra-articular distance, and total distance were measured. Surgeons determined the depth and angle of tunnels based on the patella tendon graft length dimensions in each case. After passage of the graft, the distance from the distal graft tip to the tibial cortex aperture was measured. GTM was defined as the need for additional measures to obtain satisfactory tibial graft fixation (< 1 5e20 mm of bone fixation). The incidence of mismatch was 6/100 (6%). Five cases involved the graft being too long, with the tibial bone plug protruding excessively from the tibial tunneld4/5 had a patella tendon length ? 50 mm. Three cases were managed with femoral tunnel recession, and two were treated with a free bone plug technique. One patient with a patella tendon length of 35 mm had a graft that was too short, with the tibial bone plug recessed in the tibial tunnel. Of patients whose tibial tunnel distance was within 5 mm of the patella tendon length, only 1/46 (2%) patients had mismatch, whereas 5/54 (9%) of patients who had >5 mm difference had mismatch. The incidence of grafttunnel mismatch after anatomic ACLR using BTPB and anteromedial portal drilling in this study is 6%. To limit the occurrence of GTM where the graft is too long, surgeons should drill tibial tunnel distances within 5 mm of the patella tendon length

Abstract. Background. Performing lateral extra-articular tenodesis (LET) with ACL reconstruction may conflict with the ACLR femoral tunnel. Methods. 12 fresh-frozen cadaveric knees were used: at 120 flexion, an 8mm ACLR femoral tunnel was drilled in the anteromedial bundle position via the anteromedial portal. A modified Lemaire LET was performed using a 1 cm-wide iliotibial band strip left attached to Gerdy's tubercle. The LET femoral fixation point was identified 10mm proximal / 5 mm posterior to the LCL femoral attachment, and a 2.4-mm guide wire was drilled, aiming at 0, 10, 20, or 30 degrees anteriorly in the axial plane, and at 0, 10, or 20 degrees proximally in the coronal plane. The relationship between the LET drilling guide wire and the ACLR femoral tunnel reamer was recorded for each combination. When collision with the femoral tunnel was recorded, the LET wire depth was measured. Results. Tunnel conflict occurred at a mean LET wire depth of 23.6 mm (15–33 mm). No correlation existed between LET wire depth and LET drilling orientation (r=0.066; p=0.67). Drilling angle in the axial plane was significantly associated with the occurrence of tunnel conflict (P < .001). However, no such association was detected when comparing the drilling angle in the coronal plane (P=0.267). Conclusion. Conflict occurred at as little as 15 mm depth. When longer implants are used, the orientation should be at least 30 degrees anterior in the axial plane. Clinical Relevance. This study provides important information for surgeons performing LET in combination with ACLR

Aims

The best surgical strategy for the management of displaced bucket-handle (BH) meniscal tears in an anterior cruciate ligament (ACL)-deficient knee is unclear. Combining meniscal repair with ACL reconstruction (ACLR) is thought to improve meniscal healing rates; however, patients with displaced BH meniscal tears may lack extension. This leads some to advocate staged surgery to avoid postoperative stiffness and loss of range of motion (ROM) following ACLR.

Correct femoral tunnel position in anterior cruciate ligament reconstruction (ACLR) is critical in obtaining good clinical outcomes. We aimed to delineate whether any difference exists between the anteromedial (AM) and trans-tibial (TT) portal femoral tunnel placement techniques on the primary outcome of ACLR graft rupture. Adult patients (>18year old) who underwent primary ACLR between January 2011 – January 2018 were identified and divided based on portal technique (AM v TT). The primary outcome measure was graft rupture. Univariate analysis was used to delineate association between independent variables and outcome. Binary logistic regression was utilised to delineate odds ratios of significant variables. 473 patients were analysed. Median age at surgery was 27 years old (range 18–70). A total of 152/473, (32.1%) patients were AM group compared to 321/473 (67.9%) TT. Twenty-five patients (25/473, 5.3%) sustained graft rupture. Median time to graft rupture was 12 months (IQR 9). A higher odds for graft rupture was associated with the AM group, which trended towards significance (OR 2.03; 95% CI 0.90 – 4.56, p=0.081). Older age at time of surgery was associated with a lower odds of rupture (OR 0.92, 95% CI 0.86 – 0.98, p=0.014). There is no statistically significant difference in ACLR graft rupture rates when comparing anteromedial and trans-tibial portal technique for femoral tunnel placement. There was a trend towards higher rupture rates in the anteromedial portal group

Anterior cruciate ligament (ACL) injuries are one of the most common ligament injury occurring in young and active individuals. Reconstruction of the torn ligament is the current standard of care. Of the many factors which determine the surgical outcome, fixation of the graft in the bony tunnels has significant role. This study compared the clinical and functional outcome in patients who underwent ACL reconstruction by standard anteromedial portal technique with single bundle hamstring graft anchored in the femoral tunnel using rigidfix and cortical button with adjustable loops. The tibial fixation and rehabilitation protocol were same in both groups. 107 patients underwent ACL reconstruction over a two-year period (87 males, 20 females, 44 after motor vehicle accident, 34 after sports injuries, 79 isolated ACL tear, 21 associated medial meniscus tear, 16 lateral meniscus tear and 11 both menisci). Rigid fix group had 47 patients and adjustable loop 60 patients. Clinical evaluation at end of one year showed better stability in rigid fix group regarding Lachman, anterior drawer, pivot shift tests, KT 1000 arthrometer side to side difference and hop limb symmetry index. However, the differences were not statistically significant. Functional evaluation using IKDC 2000 subjective score and Lysholm score showed better results in rigidfix group than variable loop, but was not statistically significant. However, lower scores were noted in patients with concomitant meniscal injury than in isolated acl tear patients and this was statistically significant in both groups. Rigidfix seems to give better graft fixation on femoral side than variable loop, but by the end of one year the functional outcome is comparable in isolated acl reconstructions

Aims

The aim of this study was to investigate the long-term clinical and radiological outcome of patients who suffer recurrent injuries to the anterior cruciate ligament (ACL) after reconstruction and require revision surgery.

Anterior cruciate ligament (ACL) reconstruction is commonly performed and has been for many years. Despite this, the technical details related to ACL anatomy, such as tunnel placement, are still a topic for debate. In this paper, we introduce the flat ribbon concept of the anatomy of the ACL, and its relevance to clinical practice.

Cite this article: Bone Joint J 2016;98-B:1020–6.

Aims

The purpose of this study was to report the experience of dynamic intraligamentary stabilisation (DIS) using the Ligamys device for the treatment of acute ruptures of the anterior cruciate ligament (ACL).

Despite being one of the most common orthopaedic operations, it is still not known how many arthroscopies of the knee must be performed during training in order to develop the skills required to become a Consultant. A total of 54 subjects were divided into five groups according to clinical experience: Novices (n = 10), Junior trainees (n = 10), Registrars (n = 18), Fellows (n = 10) and Consultants (n = 6). After viewing an instructional presentation, each subject performed a simple diagnostic arthroscopy of the knee on a simulator with visualisation and probing of ten anatomical landmarks. Performance was assessed using a validated global rating scale (GRS). Comparisons were made against clinical experience measured by the number of arthroscopies which had been undertaken, and ROC curve analysis was used to determine the number of procedures needed to perform at the level of the Consultants.

There were marked differences between the groups. There was significant improvement in performance with increasing experience (p < 0.05).

ROC curve analysis identified that approximately 170 procedures were required to achieve the level of skills of a Consultant.

We suggest that this approach to identify what represents the level of surgical skills of a Consultant should be used more widely so that standards of training are maintained through the development of an evidenced-based curriculum.

Cite this article: Bone Joint J 2015;97-B:1309–15.

We used immediate post-operative in vivo three-dimensional computed tomography to compare graft bending angles and femoral tunnel lengths in 155 patients who had undergone single-bundle reconstruction of the anterior cruciate ligament using the transtibial (n = 37), anteromedial portal (n = 72) and outside-in (n = 46) techniques. The bending angles in the sagittal and axial planes were significantly greater but the coronal-bending angle was significantly less in the transtibial group than in the anteromedial portal and outside-in groups (p < 0.001 each). The mean length of the femoral tunnel in all three planes was significantly greater in the transtibial group than the anteromedial portal and outside-in groups (p < 0.001 each), but all mean tunnel lengths in the three groups exceeded 30 mm. The only significant difference was the coronal graft- bending angle in the anteromedial portal and outside-in groups (23.5° vs 29.8°, p = 0.012). Compared with the transtibial technique, the anteromedial portal and outside-in techniques may reduce the graft-bending stress at the opening of the femoral tunnel. Despite the femoral tunnel length being shorter in the anteromedial portal and outside-in techniques than in the transtibial technique, a femoral tunnel length of more than 30 mm in the anteromedial portal and outside-in techniques may be sufficient for the graft to heal. . Cite this article: Bone Joint J 2014;96-B:743–51

The February 2014 Knee Roundup³⁶⁰ looks at: whether sham surgery is as good as arthroscopic meniscectomy; distraction in knee osteoarthritis; whether trans-tibial tunnel placement increases the risk of graft failure in ACL surgery; whether joint replacements prevent cardiac events; the size of the pulmonary embolism problem; tranexamic acid and knee replacement haemostasis; matching the demand for knee replacement and follow-up; predicting the length of stay after knee replacement; and popliteal artery injury in TKR.

Lateral epicondylitis, or ’tennis elbow’, is a common condition that usually affects patients between 35 and 55 years of age. It is generally self-limiting, but in some patients it may continue to cause persistent symptoms, which can be refractory to treatment. This review discusses the mechanism of disease, symptoms and signs, investigations, current management protocols and potential new treatments.

Cite this article: Bone Joint J 2013;95-B:1158–64.

Background. Recent publications have supported the anatomic placement of anterior cruciate grafts to optimise knee function. However, anatomic placement using the anteromedial portal has been shown to have a higher failure rate than traditional graft placement using the transtibial method. This is possibly due to it being more technically difficult and to the short femoral tunnel compromising fixation methods. It also requires the knee to be in hyper flexion. This position is not feasible during with a tourniquet in situ on the heavily muscled thighs of some athletes. Hypothesis: That navigation can be used to place the femoral tunnel in the anatomic position via a more medial transtibial tunnel. Methods. 25 patients underwent Navigated Anterior Cruciate reconstruction with quadruple hamstring grafts. The Orthopilot™ 3.0 ACL (BBraun Aesculap, Tuttlingen) software was used. The femoral and tibial ACL footprints were marked on the bones with a radio frequency probe and registered. The pivot shift test, anterior drawer and internal and external rotation were registered. A navigated tibial guide wire was inserted at 25° to the sagittal plane and 45° to the transverse plane exiting through the centre of the tibial footprint. The guide wire was advanced into the joint to just clear of the surface of the femoral footprint with the knee in 90° flexion. Flexion/extension of the knee was done to determine the closest position of the guide wire tip to the centre of the anatomical femoral footprint. If the tip was within 2mm of the centre of footprint, the position was accepted. If not the tibial guide wire was repositioned and the process repeated. The tibial tunnel was drilled, followed by transtibial drilling of the femoral tunnel. A screen shot was done to allow determination of the shape and area of the tunnel aperture relative to the femoral footprint using ImageJ (National Institute of Health). The graft was fixed proximally with an Arthrex ACL Tightrope® and distally with a Genesys™ interference screw. The pivot shift test, anterior drawer and internal and external rotation were repeated and recorded using the software. Results. In 22 out of 25 patients the centre of the drill hole was within 2mm of the centre of the anatomic femoral footprint. In 3 patients it was between 2 and 4 mm off centre. The femoral tunnel diameter ranged from 7.5mm to 9.5mm. In 23 knees there was more than 80 % overlap between the tunnel aperture and the anatomical footprint. In the other 2 knees there was 65% and 75% overlap respectively. The direction of the final tibial tunnel ranged from 22° to 28° from the sagittal plane and 42° to 49° from the transverse plane. The optimum knee flexion was between 76° and 94°. In all cases, the pivot shift recorded by the software was absent after graft fixation. There was a statistically significant difference between the anterior drawer, internal and external rotation before and after graft fixation (p<0.05). Conclusion. Based on our data, navigation allows reproducible transtibial anatomic placement of the quadruple hamstring ACL graft. This is possible when the position of the tibial tunnel is customised to the anatomy of the individual patient's knee

Objectives

Our aim was to assess the use of intra-operative fluoroscopy in the assessment of the position of the tibial tunnel during reconstruction of the anterior cruciate ligament (ACL).

The purpose of the study was to compare prospectively and randomly two ACL reconstruction single bundle techniques, one referred to as traditional and the other referred to as anatomical, where the coronal angulation of the femoral tunnel aimed a more horizontal position at 2 and 10 o'clock. Orthopilot® System (Aesculap, Tuttlingen, Germany) was used to assist tunnel positioning in order to obtain and register translational and rotational stability. Eighteen patients (14 men and 4 women), average age 33.8 years (range 18 to 49), with isolated ACL lesion were randomized in two groups, A (Conventional) and B (Anatomical). All patients were submitted to ACL navigated arthroscopic reconstruction with quadruple hamstrings grafts. Anteromedial portal access for femoral tunnel drilling was used in all patients. The tibial and femoral tunnels drillings were monitored by the Aesculap® Orthopilot Navigation System. In Group A, the femoral tunnel positioning aimed isometricity. In Group B, femoral tunnel was drilled at 25% of Blumensaat's line length from the posterior cortex, and 30° orientation in coronal plane. Initial and final Maximum Anterior tibial Displacement (MATD), Internal Tibial Rotation (ITR) and External Tibial Rotation (ETR) at 30° knee flexion data were recorded intra operatively by the navigation system. No horizontal or rotational stability differences were found for MATD (p = 0.68), ITR (p = 014) and ETR (0.13). This study did not support the hypothesis that a more anatomical positioning leads to better rotational or anterior stability