Aims

The aim of this study was to investigate the outcomes of arthroscopic decompression of calcific tendinitis performed without repairing the rotator cuff defect.

Aims

The outcomes following nonoperative management of minimally displaced greater tuberosity (GT) fractures, and the factors which influence patient experience, remain poorly defined. We assessed the early patient-derived outcomes following these injuries and examined the effect of a range of demographic- and injury-related variables on these outcomes.

Previously, we conducted a multi-center, double-blinded randomized controlled trial comparing arthroscopic Bankart repair with and without remplissage. The end point for the randomized controlled trial was two years post-operative, providing support for the benefits of remplissage in the short term in reducing recurrent instability. The aim of this study was to compare the medium term (3 to 9 years) outcomes of patients previously randomized to have undergone isolated Bankart repair (NO REMP) or Bankart repair with remplissage (REMP) for the management of recurrent anterior glenohumeral instability. The rate of recurrent instability and instances of re-operation were examined.

The original study was a double-blinded, randomized clinical trial with two 1:1 parallel groups with recruitment undertaken between 2011 and 2017. For this medium-term study, participants were reached for a telephone follow-up in 2020 and asked a series of standardized questions regarding ensuing instances of subluxation, dislocation or reoperation that had occurred on their shoulder for which they were randomized. Descriptive statistics were generated for all variables. “Failure” was defined as occurrence of a dislocation. “Recurrent instability” was defined as the participant reporting a dislocation or two or more occurences of subluxation greater than one year post-operative. All analyses were undertaken based on intention-to-treat whereby their data was analyzed based on the group to which they were originally allocated.

One-hundred and eight participants were randomized of which 50 in the NO REMP group and 52 in the REMP group were included in the analyses in the original study. The mean number of months from surgery to final follow-up was 49.3 for the NO REMP group and 53.8 for the REMP group. The rates of re-dislocation or failure were 8% (4/52) in the REMP group at an average of 23.8 months post-operative versus 22% (11/50) in the NO REMP at an average of 16.5 months post-operative. The rates of recurrent instability were 10% (5/52) in the REMP group at an average of 24 months post-operative versus 30% (15/50) in the NO REMP group at an average of 19.5 months post-operative. Survival curves were significantly different favouring REMP in both scenarios.

Arthroscopic Bankart repair combined with remplissage is an effective procedure in the treatment of patients with an engaging Hill-Sachs lesion and minimal glenoid bone loss (<15%). Patients can expect favourable rates of recurrent instability when compared with isolated Bankart repair at medium term follw-up.

Aims

There remains a lack of consensus regarding the management of chronic anterior sternoclavicular joint (SCJ) instability. This study aimed to assess whether a standardized treatment algorithm (incorporating physiotherapy and surgery and based on the presence of trauma) could successfully guide management and reduce the number needing surgery.

Aims

The aim of this study is to provide a detailed description of cases combining bridging patch repair with artificial ligament “internal brace” reinforcement to treat irreparable massive rotator cuff tears, and report the preliminary results.

Aims

The aim of this study was to describe a quantitative 3D CT method to measure rotator cuff muscle volume, atrophy, and balance in healthy controls and in three pathological shoulder cohorts.

Introduction. Shoulder arthoplasty has increased in the last years and its main goal is to relieve pain and restore function. Shoulder prosthesis enters in the market without any type of pre-clinical tests. Within this paper we present study experimental and computational tests as pre-clinical testing to evaluate total shoulder arthoplasty performance. Materials and methods. An in vitro experimental simulator was designed to characterize experimentally the intact and implanted shoulder glenoid articulation. Fourth generation Sawbones® composite left humerus and scapula were used and the cartilage was replicated with silicone for the intact articulation (figure 1). In the intact experimental articulation we considered the inferior glenohumeral ligament as an elastic band with equivalent mechanical properties. For the implanted shoulder, the Comprehensive® Total Shoulder System (Biomet®) with a modular Hybrid® glenoid base and Regenerex® central post was considered (figure 2). The prostheses were implanted by an experienced surgeon and clinical results from orthopedic registers were collected. The system structures were placed to simulate 90º in abduction, including the following muscle forces: Deltoideus 300N, Infraspinatus 120N, Supraspinatus 90N and Subscapularis 225N. The finite element model was created with tetrahedral linear elements with linear elastic and isotropic material for the humerus in figure 3, (Young's modulus for cortical bone − 16.5 GPa; trabecular bone − 124 MPa). Anisotropic behavior was considered for the scapula model (E11 = 342.1 MPa, E22 = 212.8 MPa, E33 = 194.4 MPa). The shoulder prosthesis was of polyethylene with 1GPa and titanium with 110 GPa. The Poisson's ratio was 0.3 in all material, except for polyethylene where we assumed a value of 0.4. A long-term post-operative condition was simulated. Results. The experimental results were compared with numerical ones for model validation. The strains measured evidence the effect of the implant presence, manly in the scapula. In the anterior region presents an increase of strains (+26%) was observed for the anterior region and decrease (−52%) in the posterior region, suggesting strain shielding in figure 4. At the glenoid cavity, the numerical principal strains present safety values of strains (200 to 2500) µε in both axial and coronal planes. This indicates that on the long-term the glenoid prosthesis is well fixed to the surrounding bone tissue and bone integrity is maintained despite the presence of the implant. However there are some peak values (2500, 25 000 µε) that were observed in some small areas in the posterior and distal regions. Results were compared with clinical ones. Discussion and Conclusions. The proposed pre-clinical test with the articulation at 90º in abduction can predict bone behavior when total shoulder prosthesis is implanted and in the long term post-operative condition. The results obtained evidence some critical regions around the glenoid component. This pre-clinical test can be implemented to improve the concepts before market

Aims

Controversy about the use of an anatomical total shoulder arthroplasty (aTSA) in young arthritic patients relates to which is the ideal form of fixation for the glenoid component: cemented or cementless. This study aimed to evaluate implant survival of aTSA when used in patients aged < 60 years with primary glenohumeral osteoarthritis (OA), and to compare the survival of cemented all-polyethylene and cementless metal-backed glenoid components.

Total shoulder arthroplasty is a well-tested procedure that offers pain relief and restores the joint function. However, failure rate is still high, and glenoid loosening is pointed as the main reason in orthopedic registers. In order to understand the principles of failure, the principal strain distributions after implantation with Comprehensive® Total Shoulder System of Biomet® were experimental and numerically studied to predict bone behavior. Fourth generation composite left humerus and scapula from Sawbones® were used. These were implanted with Comprehensive® Total Shoulder System (Biomet®) with a modular Hybrid® glenoid base and Regenerex® glenoid and placed in situ by an experienced surgeon. The structures were placed in order to simulate 90º abduction, including principal muscular actions. Muscle forces used were as follows: Deltoideus 300N, Infraspinatus 120N, Supraspinatus 90N, Subscapularis 225N. All bone structures were modeled considering cortical and the trabecular bone of the scapula. The components of prosthesis were placed in the same positions than those in the in vitro models. Geometries were meshed with tetrahedral linear elements, with material properties as follows: Elastic modulus of cortical bone equal to 16 GPa, elastic modulus of trabecular bone equal to 0.155 GPa, polyethylene equal to 1GPa and titanium equal to 110 GPa. The assumed Poisson's ratio was 0.3 in all except for polyethylene where we assumed a value of 0.4. The prosthesis was considered as glued to the adjacent bone. The finite element model was composed of 336 024 elements. At the glenoid cavity, the major influence of the strain distributions was observed at the posterior-superior region, in both cortical and trabecular bone structures. The system presents critical region around holes of fixation in glenoid component. At the trabecular bone, the maximum principal strains at the posterior-superior region ranged from 2250 µε to 3000 µε. While at the cortical bone, the maximum principal strains were 300 µε to 400 µε. The results observed evidence some critical regions of concern and the effect of implant in the bone strains mainly at the posterior-superior region of the glenoid cavity is pronounced. This indicates that this region is more affected by the implant if bone remodeling is a concern and it is due to the strain-shielding effect, which has been connected with loosening of the glenoid component

Aims

The aim of this study was to analyse human muscle tissue before and after rotator cuff repair to look for evidence of regeneration, and to characterise the changes seen in the type of muscle fibre.

Aims

The eccentric glenosphere was principally introduced into reverse shoulder arthroplasty to reduce the incidence of scapular notching. There is only limited information about the influence of its design on deltoid power and joint reaction forces.

The aim of our study was to investigate how the diameter and eccentricity of the glenosphere affect the biomechanics of the deltoid and the resultant joint reaction forces.

The purpose of this study was to evaluate the natural history of rheumatoid disease of the shoulder over an eight-year period. Our hypothesis was that progression of the disease is associated with a decrease in function with time.

A total of 22 patients (44 shoulders; 17 women, 5 men, (mean age 63)) with rheumatoid arthritis were followed for eight years. All shoulders were assessed using the Constant score, anteroposterior radiographs (Larsen score, Upward-Migration-Index (UMI)) and ultrasound (US). At final follow-up, the Short Form-36, disabilities of the arm, shoulder and hand (DASH) Score, erythrocyte sedimentation rate and use of anti-rheumatic medication were determined.

The mean Constant score was 72 points (50 to 88) at baseline and 69 points (25 to 100) at final follow-up. Radiological evaluation showed progressive destruction of the peri-articular structures with time. This progression of joint and rotator cuff destruction was significantly associated with the Constant score. However, at baseline only the extent of rotator cuff disease and the UMI could predict the Constant score at final follow-up.

A plain anteroposterior radiograph of the shoulder is sufficient to assess any progression of rheumatoid disease and to predict functional outcome in the long term by using the UMI as an indicator of rotator cuff degeneration.

Cite this article: Bone Joint J 2014;96-B:1520–4.

Objectives

Rotator cuff tears are among the most common and debilitating upper extremity injuries. Chronic cuff tears result in atrophy and an infiltration of fat into the muscle, a condition commonly referred to as ‘fatty degeneration’. While stem cell therapies hold promise for the treatment of cuff tears, a suitable immunodeficient animal model that could be used to study human or other xenograft-based therapies for the treatment of rotator cuff injuries had not previously been identified.

Objectives

The most prevalent disorders of the shoulder are related to the muscles of rotator cuff. In order to develop a mechanical method for the evaluation of the rotator cuff muscles, we created a database of isometric force generation by the rotator cuff muscles in normal adult population. We hypothesised the existence of variations according to age, gender and dominancy of limb.

Aims

We performed a systematic review of the literature to determine whether earlier surgical repair of acute rotator cuff tear (ARCT) leads to superior post-operative clinical outcomes.

Surgical repair of posterosuperior rotator cuff tears has a poorer outcome and a higher rate of failure compared with repairs of supraspinatus tears. In this prospective cohort study 28 consecutive patients with an irreparable posterosuperior rotator cuff tear after failed conservative or surgical treatment underwent teres major tendon transfer. Their mean age was 60 years (48 to 71) and the mean follow-up was 25 months (12 to 80). The mean active abduction improved from 79° (0° to 150°) pre-operatively to 105° (20° to 180°) post-operatively (p = 0.011). The mean active external rotation in 90° abduction improved from 25° (0° to 70°) pre-operatively to 55° (0° to 90°) post-operatively (p < 0.001). The mean Constant score improved from 43 (18 to 78) pre-operatively to 65 (30 to 86) post-operatively (p < 0.001). The median post-operative VAS (0 to 100) for pain decreased from 63 (0 to 96) pre-operatively to 5 (0 to 56) post-operatively (p < 0.001).

In conclusion, teres major transfer effectively restores function and relieves pain in patients with irreparable posterosuperior rotator cuff tears and leads to an overall clinical improvement in a relatively young and active patient group with limited treatment options.

Cite this article: Bone Joint J 2013;95-B:523–9.

Purpose of the study: Four elements differentiate myotendinous tears of the infraspinatus from other rotator cuff tears: the tendon insertion on the trochiter and the joint capsule are spared; the onset in characterized by intense muscle oedema followed at 6 to 12 months by severe and definitive fatty degeneration.

Material and method: Fifty-nine myotendinous tears of the infraspinatus were collected prospectively from 1993 to 2007. Female gender predominated (58%); trauma was noted at onset in 22% of the shoulders and the mean age of discovery was 48.9 years. Twenty-nine shoulders were seen at the acute phase with significant muscle oedema recognized on the MRI T2 Fat Sat sequence. A second group of 30 patients had grade 4 fatty infiltration of the infraspinatus without full thickness cuff tears. The EMG was available for 23 shoulders and was normal in all, ruling out a neurological cause. Associated lesions of the supraspinatus and infraspinatus tendons were: tendon calcification (61%) and partial tears at the acute phase (21%) and chronic phase (70%) suggesting a degenerative cause.

Results: Twenty-four patients underwent surgery and 35 had a medical treatment. At mean 46 months follow-up (range 12–125) the Constant score improved from 51.7 to 69.4 points (p< 0.0001). There was no different statistically between the operated and non-operated patients (p=0.325). All patients seen at the acute phase of the oedema progressed to complete grade 4 fatty degeneration of the muscle, irrespective of the treatment delivered.

Discussion: Early diagnosis of this lesion can be achieved with T2 Fat Sat MRI sequences. Arthroscopic repair to tighten the infraspinatus muscle could avoid the irremediable degeneration with total loss of muscle function.

This paper aims to evaluate the Remplissage arthroscopic technique as described by Eugene Wolf used in patients with traumatic shoulder instability that present glenoid bone loss and Hill Sachs defects.

In our study 28 patients (5 women and 23 men) with mean age of 31 yrs underwent arthroscopic stabilization of the shoulder by the same surgeon during 2007–2008 period. All patients presented Hill Sachs lesion, 11 of them had medium or large glenoid bone loss, 10 had an “inverted pear” glenoid shape, 4 had been revised for stabilization in the same shoulder and 14 presented joint hypermobility. Mean age for the age of 1st dislocation was 20,1 yrs and our follow up ranged from 5–28 months (Mean=18). The recurrence of instability and the functional outcome were evaluated pre-op and postop with the Rowe Zarins Score. The post op rehabilitation was performed by a specialist.

None of the patients presented recurrent instability. The Rowe Zarins Score raised from a mean pre op score of 23,33 (15–60) to a mean post op score of 97,11 (75–100) (p< 0.05). All the patients that were into sports activities before the presentation of shoulder instability began training again and our post op evaluation of the shoulder’s ROM showed a decrease in the external rotation from 0°–15°.

The infraspinatus tenodesis and posterior capsulodesis in patients with humeral bone loss seems to offer so far excellent post op results despite the slight decrease in the external rotation of the shoulder.

We describe the clinical outcome of a technique of surgical augmentation of chronic massive tears of the rotator cuff using a polyester ligament (Dacron) in 21 symptomatic patients (14 men, seven women) with a mean age of 66.5 years (55.0 to 85.0). All patients had MRI and arthroscopic evidence of chronic massive tears. The clinical outcome was assessed using the Constant and Murley and patient satisfaction scores at a mean follow-up of 36 months (30 to 46).

The polyester ligament (500 mm × 10 mm) was passed into the joint via the portal of Neviaser, medial to the tear through healthy cuff. The two ends of the ligament holding the cuff were passed through tunnels made in the proximal humerus at the footprint of the insertion of the cuff. The ligament was tied with a triple knot over the humeral cortex.

All the patients remained free from pain (p < 0.001) with improvement in function (p < 0.001) and range of movement (p < 0.001). The mean pre-operative and post-operative Constant scores were 46.7 (39.0 to 61.0) and 85.4 (52.0 to 96.0), respectively (p < 0.001). The mean patient satisfaction score was 90%. There were two failures, one due to a ruptured ligament after one year and the other due to deep-seated infection. The MR scan at the final follow-up confirmed intact and thickened bands in 15 of 17 patients.

This technique of augmentation gives consistent relief from pain with improved shoulder movement in patients with symptomatic massive tears of the rotator cuff.

Purpose: To determine if administration of recombinant bFGF in an alginate gel would increase early healing mechanical parameters in acutely injured rat rotator cuff tendon at specific time points. Method: Sprague Dawley rats were randomly divided into 2 groups and had surgically created 1mm (half tendon width) full thickness injuries at exactly 2mm from insertion site of Infraspinatus on the humerus. 200ng of bFGF or vehicle control was administered to randomly chosen rats. Tendons were harvested at 1 week, 2 weeks and 4 weeks. In both groups, the Infraspinatus tendon was dissected, and left attached to the humerus. At the time of testing, the intact portion of the injured tendon was divided sharply across tendon fibers at the level of the injury leaving only the healing tissue callus in continuity with the remaining proximal and distal portions of the tendon and loaded to failure. Results: At 1 week the injury group’s average load to failure was 0.60N versus 0.61N in the bFGF injury group P = 1.000. At 2 weeks the injury group’s average load to failure increased to 1.03N versus 2.08N in the bFGF injury group P = 0.440 At 4 weeks the injury group’s average load to failure increased to 3.93N versus 5.56N in the bFGF injury group P = 0.008 representing a 41% increase in ultimate load. At 4 weeks, callus size of the injury group was 0.4mm2 versus 2.7mm2 in the bFGF injury group P < 0.001. Stiffness at 4 weeks for the injury tendons was 2.15 N/mm versus 3.54 N/mm in the bFGF group P = 0.008. Conclusion: At 4 weeks healing tissue of acutely injured rotator cuff exposed to bFGF has an increase in ultimate load to failure (41% compared to control), increase in tendon callus size and stiffness. Our findings suggest a role of bFGF or similar growth factors in accelerating the healing of injured rotator cuff tendon