Odontoid fracture of the second cervical vertebra (C2) is the most common spinal fracture type in elderly patients. However, very little is known about the biomechanical fracture mechanisms, but could play a role in fracture prevention and treatment. This study aimed to investigate the biomechanical competence and fracture characteristics of the odontoid process. A total of 42 human C2 specimens (14 female and 28 male, 71.5 ± 6.5 years) were scanned via quantitative computed tomography, divided in 6 groups (n = 7) and subjected to combined quasi-static loading at a rate of 0.1 mm/s until fracturing at inclinations of −15°, 0° and 15° in sagittal plane, and −50° and 0° in transverse plane. Bone mineral density (BMD), specimen height, fusion state of the ossification centers, stiffness, yield load, ultimate load, and fracture type according to Anderson and d'Alonzo were assessed. While the lowest values for stiffness, yield, and ultimate load were observed at load inclination of 15° in sagittal plane, no statistically significant differences could be observed among the six groups (p = 0.235, p = 0.646, and p = 0.505, respectively). Evaluating specimens with only clearly distinguishable fusion of the ossification centers (n = 26) reveled even less differences among the groups for all mechanical parameters. BMD was positively correlated with yield load (R² = 0.350, p < 0.001), and ultimate load (R² = 0.955, p < 0.001), but not with stiffness (p = 0.070). Type III was the most common fracture type (23.5%). These biomechanical outcomes indicate that load direction plays a subordinate role in traumatic fractures of the odontoid process in contrast to BMD which is a strong determinant of stiffness and strength. Thus, odontoid fractures appear to result from an interaction between load magnitude and bone quality

Aims

The timing of surgical fixation in spinal fractures is a contentious topic. Existing literature suggests that early stabilization leads to reduced morbidity, improved neurological outcomes, and shorter hospital stay. However, the quality of evidence is low and equivocal with regard to the safety of early fixation in the severely injured patient. This paper compares complication profiles between spinal fractures treated with early fixation and those treated with late fixation.

Aims. Fracture of the odontoid process (OP) in the elderly is associated with mortality rates similar to those of hip fracture. The aim of this study was to identify variables that predict mortality in patients with a fracture of the OP, and to assess whether established hip fracture scoring systems such as the Nottingham Hip Fracture Score (NHFS) or Sernbo Score might also be used as predictors of mortality in these patients. Patients and Methods. We conducted a retrospective review of patients aged 65 and over with an acute fracture of the OP from two hospitals. Data collected included demographics, medical history, residence, mobility status, admission blood tests, abbreviated mental test score, presence of other injuries, and head injury. All patients were treated in a semi-rigid cervical orthosis. Univariate and multivariate analysis were undertaken to identify predictors of mortality at 30 days and one year. A total of 82 patients were identified. There were 32 men and 50 women with a mean age of 83.7 years (67 to 100). Results. Overall mortality was 14.6% at 30 days and 34.1% at one year. Univariate analysis revealed head injury and the NHFS to be significant predictors of mortality at 30 days and one year. Multivariate analysis showed that head injury is an independent predictor of mortality at 30 days and at one year. The NHFS was an independent predictor of mortality at one year. The presence of other spinal injuries was an independent predictor at 30 days. Following survival analysis, an NHFS score greater than 5 stratified patients into a significantly higher risk group at both 30 days and one year. Conclusion. The NHFS may be used to identify high-risk patients with a fracture of the OP. Head injury increases the risk of mortality in patients with a fracture of the OP. This may help to guide multidisciplinary management and to inform patients. This paper provides evidence to suggest that frailty rather than age alone may be important as a predictor of mortality in elderly patients with a fracture of the odontoid process. Cite this article: Bone Joint J 2019;101-B:253–259

Aims

We performed a retrospective, comparative study of elderly patients with an increased risk from anaesthesia who had undergone either anterior screw fixation (ASF) or halo vest immobilisation (HVI) for a type II odontoid fracture.

Aims

Although atlantoaxial rotatory fixation (AARF) is a common cause of torticollis in children, the diagnosis may be delayed. The condition is characterised by a lack of rotation at the atlantoaxial joint which becomes fixed in a rotated and subluxed position. The management of children with a delayed presentation of this condition is controversial. This is a retrospective study of a group of such children.

Aims

Clinical and radiological data were reviewed for all patients with mucopolysaccharidoses (MPS) with thoracolumbar kyphosis managed non-operatively or operatively in our institution.

Fractures of the odontoid peg are common spinal injuries in the elderly. This study compares the survivorship of a cohort of elderly patients with an isolated fracture of the odontoid peg versus that of patients who have sustained a fracture of the hip or wrist. A six-year retrospective analysis was performed on all patients aged > 65 years who were admitted to our spinal unit with an isolated fracture of the odontoid peg. A Kaplan–Meier table was used to analyse survivorship from the date of fracture, which was compared with the survivorship of similar age-matched cohorts of 702 consecutive patients with a fracture of the hip and 221 consecutive patients with a fracture of the wrist.

A total of 32 patients with an isolated odontoid fracture were identified. The rate of mortality was 37.5% (n = 12) at one year. The period of greatest mortality was within the first 12 weeks. Time made a lesser contribution from then to one year, and there was no impact of time on the rate of mortality thereafter. The rate of mortality at one year was 41.2% for male patients (7 of 17) compared with 33.3% for females (5 of 15).

The rate of mortality at one year was 32% (225 of 702) for patients with a fracture of the hip and 4% (9 of 221) for those with a fracture of the wrist. There was no statistically significant difference in the rate of mortality following a hip fracture and an odontoid peg fracture (p = 0.95). However, the survivorship of the wrist fracture group was much better than that of the odontoid peg fracture group (p < 0.001). Thus, a fracture of the odontoid peg in the elderly is not a benign injury and is associated with a high rate of mortality, especially in the first three months after the injury.

Cite this article: Bone Joint J 2014;96-B:88–93.

We present the case of a 15-year-old boy with symptoms due to Klippel–Feil syndrome. Radiographs and CT scans demonstrated basilar impression, occipitalisation of C1 and fusion of C2/C3. MRI showed ventral compression of the medullocervical junction. Skull traction was undertaken pre-operatively to determine whether the basilar impression could be safely reduced. During traction, the C3/C4 junction migrated 12 mm caudally and spasticity resolved. Peri-operative skull-femoral traction enabled posterior occipitocervical fixation without decompression. Following surgery, cervical alignment was restored and spasticity remained absent. One year after surgery he was not limited in his activities. The surgical strategy for patients with basilar impression and congenital anomalies remains controversial. The anterior approach with decompression is often recommended for patients with ventral compression of the medullocervical region, but such procedures are technically demanding and carry a significant risk of complications. Our surgical strategy was an alternative solution. Prior to a posterior cervical fixation, without decompression, skull traction was used to confirm that the deformity was reducible and effective in resolving associated myelopathy.

Fractures of the odontoid peg are relatively common in elderly people. Often they are minimally displaced and can be treated with a collar. However, a fracture which is displaced significantly may be difficult to manage. We describe the case of an 80-year-old man with a fracture of the odontoid peg which was completely displaced and caused respiratory distress. After initial closed reduction and application of a halo jacket, open and internal fixation was undertaken and relieved his symptoms. It is a safe and effective way to manage this injury.

We reviewed the outcome of a retrospective case series of eight patients with atlantoaxial instability who had been treated by percutaneous anterior transarticular screw fixation and grafting under image-intensifier guidance between December 2005 and June 2008.

The mean follow-up was 19 months (8 to 27). All eight patients had a solid C1–2 fusion. There were no breakages or displacement of screws. All the patients with pre-operative neck pain had immediate relief from their symptoms or considerable improvement. There were no major complications. Our preliminary clinical results suggest that percutaneous anterior transarticulation screw fixation is technically feasible, safe, useful and minimally invasive when using the appropriate instruments allied to intra-operative image intensification, and by selecting the correct puncture point, angle and depth of insertion.

We present the case of an 83-year-old man who developed quadriparesis and respiratory embarrassment following osteomyelitis at the occipito-atlantoaxial junction. He had developed an abscess at this site after an earlier urinary infection with methicillin-resistant staphylococcus aureus. Stabilisation of the neck and antibiotic therapy led to an almost complete neurological recovery without recourse to anterior surgery.

Introduction: The intricate biomechanical function of the alar ligaments in the craniocervical articular complex has received considerable scientific attention. While allowing the greatest range of axial rotation of the entire spine with 40° to each side, definitive restraint at the extremes of motion by the alar ligaments is of vital importance. Detailed knowledge of the function of these ligaments is essential for comprehending the factors leading to potentially devastating instability. Methods: Bilateral alar ligaments including the bony entheses were removed from six adult cadavers aged 65–89 years within 48 hours of death. All specimens were judged to be free of abnormalities with the exception of non-specific degenerative changes. Dimensions of the alar ligaments were measured. Schematic multipla-nar reconstruction of axial atlanto-axial rotation was done in the transverse and frontal planes for the neutral position and for rotation to 30° and 40° in the neutral plane to assess schematic fibre elongation during axial rotation and to determine the change in the angle of insertion at the odontoid and condylar entheses. This was repeated with a 1mm descending translation of the occipital condyles at 30° and 3mm descending translation of the occipital condyles at 40° rotation. Results: The average diameter of the odontoid process measured in the sagittal plane was 10.6 mm (SD 1.1). The longest fibre length was measured from the posterior border of the odontoid enthesis to the posterior border of the condylar enthesis with an average of 13.2 mm (SD 2.5) and the shortest between the lateral (anterior) border odontoid enthesis and the anterior condylar enthesis with an average of 8.2 mm (SD 2.2). Attachment areas of the enthesis revealed an average of 60 mm2 (SD 12.4) for the odontoid and 50,6 mm2 (SD12.6) for the condylar enthesis. Schematic fibre elongation reaches 27,1% for the longest fibres at 40° axial rotation. This is reducible to 7,8% elongation by 3mm caudal translation of the atlas. Conclusions: This theoretical model confirms that the bi-convex shape of atlanto-axial joint allows for rotation when modelled with oblique alar ligaments. This provides baseline for further research with functional MRI which will be useful for rheumatoid and post traumatic spine

The effect of rheumatoid arthritis on the anatomy of the cervical spine has not been clearly documented. We studied 129 female patients, 90 with rheumatoid arthritis and 39 with other pathologies (the control group). There were 21 patients in the control group with a diagnosis of cervical spondylotic myelopathy, and 18 with ossification of the posterior longitudinal ligament. All had plain lateral radiographs taken of the cervical spine as well as a reconstructed CT scan. The axial diameter of the width of the pedicle, the thickness of the lateral mass, the height of the isthmus and internal height were measured. The transverse diameter of the transverse foramen (d1) and that of the spinal canal (d2) were measured, and the ratio d1/d2 calculated.

The width of the pedicles and the thickness of the lateral masses were significantly less in patients with rheumatoid arthritis than in those with other pathologies. The area of the transverse foramina in patients with rheumatoid arthritis was significantly greater than that in the other patients. The ratio of d1 to d2 was not significantly different. A high-riding vertebral artery was noted in 33.9% of the patients with rheumatoid arthritis and in 7.7% of those with other pathologies. This difference was statistically significant. In the rheumatoid group there was a significant correlation between isthmus height and vertical subluxation and between internal height and vertical subluxation.

Fractures of the odontoid in children with an open basilar synchondrosis differ from those which occur in older children and adults. We have reviewed the morphology of these fractures and present a classification system for them.

There were four distinct patterns of fracture (types IA to IC and type II) which were distinguished by the site of the fracture, the degree of displacement and the presence or absence of atlantoaxial dislocation. Children with a closed synchondrosis were classified using the system devised by Anderson and D’Alonzo. Those with an open synchondrosis had a comparatively lower incidence of traumatic brain injury, a higher rate of missed diagnosis and a shorter mean stay in hospital. Certain subtypes (type IA and type II) are likely to be missed on plain radiographs and therefore more advanced imaging is recommended. We suggest staged treatment with initial stabilisation in a Halo body jacket and early fusion for those with unstable injuries, severe displacement or neurological involvement.

The purpose of this study was to propose a new classification based on the structural, anatomical and biomechanical properties of the odontoid process, to evaluate the outcome and to suggest the adequate treatment in relation to the specific fracture type. The files of 97 patients with odontoid process fractures admitted to our institution were reviewed. The external and internal anatomy of the axis has been studied. The fractures were classified according to the proposed new classification. The method was tested for reliability and validity. Mean follow-up was 14 years. Intraobserver and interobserver agreement was excellent with intraclass correlation coefficients at levels of 0.98 and 0.85 respectively. Four types of odontoid process fractures are distinguished; type A fractures are avulsion fractures involving the tip of the odontoid; type B fractures are fractures of the neck between the lower edge of the transverse ligament and the line connecting the medial corners of the upper articular facets of the axis; type C fractures involve the area between the previously mentioned line and the base of the odontoid process (type C1) or extend to the body of the axis (type C2); type D fractures are complex fractures involving more than one level of the odontoid process. Classification of odontoid process fractures has to be reconsidered as novel imaging technology has shown new patterns of fractures. Computed tomography scan with image reconstruction is mandatory. The analysis of the imaging data in the present study justifies the new classification

Background: Type II odontoid fractures are the commonest upper cervical spine injury in the elderly, following minor falls. Structural heterogeneity within the axis with deficiency of bone mass in the base of the odontoid process has been attributed for these fractures. Aims: To analyse whether osteoporosis at the dens-body junction is directly related to the occurrence of odontoid fractures in the elderly. Material and Methods: We studied the reformatted CT scan images of 36 patients over the age of 70 years who had cervical spine injuries following minor trauma. In all these patients the severity of osteoporosis at the dens-body junction, and in the peg and body of axis were evaluated. The osteoporosis was graded into none, mild, moderate and severe. Statistical analysis was performed using Pearson’s Chi-square test to find the significance of osteoporosis at the dens-body junction in producing Type II odontoid fractures in the elderly. Results: Type II odontoid fractures was seen in 21 patients. Eleven of the 21 patients with Type II fractures and eight of the 15 patients with no Type II odontoid fractures had significant osteoporosis at the dens-body junction. Five patients with Type II fracture and eight patients with no Type II fractures had significant osteoporosis at the dens and body of axis. Statistical analysis showed that the osteoporosis at the dens-body junction was not significant in patients with Type II odontoid fracture compared to those with no Type II odontoid fracture (χ. 2. = 1.1; df = 3, p = 0.78). Conclusions: Eventhough osteoporosis is one of the factors that increase the incidence of Type II fractures of the odontoid process in the elderly, it is not a direct aetiological factor

Background: Type II odontoid fractures are the commonest upper cervical spine injury in the elderly, following minor falls. Structural heterogeneity within the axis with deficiency of bone mass in the base of the odontoid process has been attributed for these fractures. Aims: To analyse whether osteoporosis at the dens-body junction is directly related to the occurrence of odontoid fractures in the elderly. Material and Methods: We studied the reformatted CT scan images of 36 patients over the age of 70 years who had cervical spine injuries following minor trauma. In all these patients the severity of osteoporosis at the dens-body junction, and in the peg and body of axis were evaluated. The severity was graded into none, mild, moderate and severe, depending on the cortical thickness, trabecular pattern, and the size of holes (absence of trabeculae) using sagittal, coronal and transverse sections of CT scan pictures. The osteoporosis was graded into none, mild, moderate and severe. Statistical analysis was performed using Pearsons Chi-square test to find the significance of osteoporosis at the dens-body junction in producing Type II odontoid fractures in the elderly. Results: Type II odontoid fractures was seen in 21 patients. Eleven of the 21 patients with Type II fractures and eight of the 15 patients with no Type II odontoid fractures had significant osteoporosis at the dens-body junction. Five patients with Type II fracture and eight patients with no Type II fractures had significant osteoporosis at the dens and body of axis. Statistical analysis showed that the osteoporosis at the dens-body junction was not significant in patients with Type II odontoid fracture compared to those with no Type II odontoid fracture (Chi-square value = 1.1; df = 3, p = 0.78). Conclusions: Eventhough osteoporosis is one of the factors that increase the incidence of Type II fractures of the odontoid process in the elderly, it is not a direct aetiological factor