We present a study done to measure the change of angle of the acetabulum or cup, due to leg length discrepancy, deformity of hip and spine on standing. In 1998 a 3-dimensional reconstruction of hip model was prepared on CAD and the change of angle of the cup was measured as Functional Acetabular Inclination Angle (FAIA) with patient standing without squaring the pelvis. The FAIA on standing was compared with angle of the cup with patient in supine position with squared pelvis. The position of the cup changed on weight bearing due to multiple issues. The results showed that one centimetre of leg lengthening changed FAIA by 3°, 10° of abduction deformity resulted in apparent lengthening of 2.87 cm and loss of lordosis anteverted the cup on loading and vice-versa. We conclude that fixed hip deformities, leg length discrepancy and spine deformities can affect the angle of cup in hip replacement surgery and may prone to dislocations, impingement and segmental wear of the cup

Achieving the correct inclination angle for the acetabular component in total hip arthroplasty (THR) can be technically challenging. The aim of this study is to validate the use of a simple, laser-guided system to address the acetabular cup inclination angle intraoperatively and quantify its accuracy and repeatability across users. A simple inclinometer system was manufactured, consisting of a laser that snaps into both the inclinometer and the handle of a standard trial cup impacter. The system functions as follows:. desired inclination angle is set on the inclinometer,. inclinometer is positioned on the acetabulum,. laser beam is projected onto and marked on a screen outside of the surgical exposure,. the impacter is reoriented in the acetabulum until the laser beam aligns with the recorded mark on the screen. A validation study was performed on this system using intact cadavers (N=4). A THR-specific. Trial acetabular components were installed unilaterally in each donor using both the laser inclinometer system with an in-line mounted intraoperative navigation system (NaviVision, Vector Vision Hip 3.1, BrainLab) serving as the measurement standard. Three orthopaedic surgeons participated in the study, two experienced with the device (“experts”) and one “novice”, and each surgeon performed two sequential validation experiments:. 10 trials at a set device inclination angle, and. 5 trials of matching the trial cup placement to this set angle. Using the laser-guided system, the inclination angle of the trial cup deviated from the desired orientation by 1.1±0.9° (mean st. dev; range: 0–3°) for all specimens across all operators. The corresponding error in anteversion angle was 1.4±1.3° (range: 0–5°). There was no difference in inclination angle between expert and novice surgeons (1.0±0.8° versus 1.1±1.2°, respectively; p> 0.10 for unpaired t-test). To set the desired inclination angle on the trial cup, original and final laser target positions were within 4.1±2.5 cm at 1 m screen placement. Results suggest that the laser-guided system has sufficient accuracy and repeatability for use intra-operatively. Inclination angles differed from prescribed angles by 1° on average, and malalignment in anteversion was subclinical, ≤5° for all cases. Furthermore, the tolerance for laser re-alignment sufficiently large (5–10 cm) to make the device functional intraoperatively. Future work will focus on expanding the sample size and correcting simple design limitations in the device

In this prospective study we studied the effect of the inclination angle of the acetabular component on polyethylene wear and component migration in cemented acetabular sockets using radiostereometric analysis.

A total of 120 patients received either a cemented Reflection All-Poly ultra-high-molecular-weight polyethylene or a cemented Reflection All-Poly highly cross-linked polyethylene acetabular component, combined with either cobalt–chrome or Oxinium femoral heads. Femoral head penetration and migration of the acetabular component were assessed with repeated radiostereometric analysis for two years. The inclination angle was measured on a standard post-operative anteroposterior pelvic radiograph. Linear regression analysis was used to determine the relationship between the inclination angle and femoral head penetration and migration of the acetabular component.

We found no relationship between the inclination angle and penetration of the femoral head at two years’ follow-up (p = 0.9). Similarly, our data failed to reveal any statistically significant correlation between inclination angle and migration of these cemented acetabular components (p = 0.07 to p = 0.9).

Background. There is much research on metal on metal hip resurfacing arthroplasty (HRA) but few studies have reported the outcome with respect to implant characteristics from non-specialist centres. Aim. To report the survival, clinical and radiological outcomes of a single surgeon series of HRA with an average follow-up of 5 years. Methods. All consecutive HRAs performed by a single surgeon between 2002–2010 at a district general hospital were examined clinically and radiologically. The median follow-up was 61 months (12–102). Clinical assessment included the Oxford Hip Score (OHS) and University of Los Angeles (UCLA) Activity Score. Radiological assessment included implant position and various bony changes. Survival was defined as a need for revision of either component. Results. There were 75 HRA procedures (59 patients): 70 Birmingham, 2 Conserve, 2 Adept and 1 ASR. The median age was 58 years (25–75) with 46.7% (35) male and 53.3% (40) female. 4.2% (3) patients were lost to follow-up. The mean acetabular and femoral implant sizes were 54.8mm (48–64) and 48.2mm (42–58) respectively. The mean acetabular and femoral inclination angle was 45.4° (20.8–75.2°) and 138° (133–149.5°) respectively. Survival rate was 92% with 6 revisions due to aseptic loosening (3) and fracture (3). These failures were all predominantly female (5) with significantly smaller mean acetabular (50mm, p=0.036) and femoral (43.3mm, p=0.038) implant sizes. Moreover, they had a higher mean acetabular inclination angle of 47.8° (p=0.27). The mean OHS was 43.5 (25–48) and the mean UCLA activity score was 6.7 (3–10). Radiological findings included heterotopic ossification in 21.6% (16), radiolucent lines in 6.8% (5), femoral neck thinning in 2.7% (2) and notching in 5.4% (4). Discussion. HRA has been shown to have comparable clinical and radiological short-medium term outcomes in a non-specialist centre using different implants. Failed procedure rate is high and patients were predominantly female, with significantly smaller implants and a higher acetabular inclination angle. Vigilance is therefore required in case selection and in follow-up for such patients

Hip resurfacing arthroplasty (HRA) is a bone conserving alternative to total hip arthroplasty. We present the early 2-year clinical and radiographic follow-up of a novel ceramic-on-ceramic (CoC) HRA in an international multi-centric cohort. Patients undergoing HRA between September 2018 and January 2021 were prospectively included. Patient-reported outcome measures (PROMS) in the form of the Forgotten Joint Score (FJS), HOOS Jr, WOMAC, Oxford Hip Score (OHS) and UCLA Activity Score were collected preoperatively and at 1- and 2-years post-operation. Serial radiographs were assessed for migration, component alignment, evidence of osteolysis/loosening and heterotopic ossification formation. 200 patients were identified to have reached 2-year follow-up. Of these, 185 completed PROMS follow-up at 2 years. There was significant improvement in HOOS (p< 0.001) and OHS (p< 0.001) and FJS (p< 0.001) between the pre-operative and 2-year outcomes. Patients reported improved pain (p<0.001), function (p<0.001) and reduced stiffness (p<0.001) as measured by the WOMAC score. Patients had improved activity scores on the UCLA Active Score (P<0.001) with 53% reporting return to impact activity at 2 years. There was no osteolysis and the mean acetabular cup inclination angle was 41deg and the femoral component shaft angle was 137deg. No fractures were reported over but there was one sciatic nerve palsy with partial recovery. Two patients were revised; one at 3 months for pain due to a misdiagnosed back problem and another at 33 months for loosening of the acetabular component with delamination of the titanium ingrowth surface. CoC resurfacing at 2-years post-operation demonstrate promising results with satisfactory PROMS

The problem associated with ceramic on ceramic total hip replacement (THR) is audible noise. Squeaking is the most frequently documented sound. The incidence of squeaking has been reported to wide range from 0.7 to 20.9%. Nevertheless there is no study to investigate on incidence of noise in computer assisted THR with ceramic on ceramic bearing. The purpose of this study was to determine the incidence and risks factors associated with noise. We retrospectively reviewed 200 patients (202 hips) whom performed computer assisted THR (Orthopilot, B. Braun, Tuttlingen, Germany) with ceramic on ceramic bearing between March 2009 and August 2012. All procedures underwent uncemented THR with posterior approach by single surgeon. All hips implanted with PLASMACUP and EXIA femoral stem (B. Braun, Tuttlingen, Germany). All cases used BIOLOX DELTA (Ceramtec, AG, Plochingen, Germany) ceramic liner and head. The incidence and type of noise were interviewed by telephone using set of questionnaire. Patient's age, weight, height, body mass index, acetabular cup size, femoral offset size determined from medical record for comparing between silent hips and noisy hips. The acetabular inclination angle, acetabular anteversion angle, femoral offset, hip offset were reviewed to compare difference between silent hips and noisy hips. The audible noise was reported for 13 hips (6.44%). 5 patients (5 hips) reported click (2.47%) and 8 patients (8 hips) squeaked (3.97%). The mean time to first occurrence of click was 13.4 months and squeak was 7.4 months after surgery. Most common frequency of click was less than weekly (60%) and squeak was 1–4 times per week (50%). Most common activity associated with noise was bending; 40% in click and 75% in squeaking. No patients complained for pain or social problem. Moreover, no patient underwent any intervention for the noise. The noise had not self-resolved in any of the patients at last follow up. Age, weight, height and BMI showed no statistically significant difference between silent hips and click hips. In addition, there was also same result between silent hips and squeaking hips. Acetabular cup insert size and femoral offset stem size the results showed that there was no statistically significant difference between silent hips and click hips, also with squeaking hips. Acetabular inclination, angle acetabular anteversion angle, femoral offset, hip offset the results shown that only acetabular anteversion angle differed significantly between silent hips (19.94±7.78 degree) and squeaking hips (13.46±5.54 degree). The results can conclude that incidence of noise after ceramic on ceramic THR with navigation was 6.44 %. Squeaking incidence was 3.97% and click incidence was 2.47%. The only associated squeaking risk factor was cup anteversion angle. In this study, squeaking hip had cup anteversion angle significant less than silent hip

Hip resurfacing arthroplasty (HRA) is a bone conserving alternative to total hip arthroplasty. We present the early 1 and 2-year clinical and radiographical follow-up of a novel ceramic-on-ceramic (CoC) HRA in a multi-centric Australian cohort. Patient undergoing HRA between September 2018 and April 2021 were prospectively included. Patient-reported outcome measures (PROMS) in the form of the Forgotten Joint Score (FJS), HOOS Jr, WOMAC, Oxford Hip Score (OHS) and UCLA Activity Score were collected preoperatively and at 1- and 2-years post-operation. Serial radiographs were assessed for migration, component alignment, evidence of osteolysis/loosening and heterotopic ossification formation. 209 patients were identified of which 106 reached 2-year follow-up. Of these, 187 completed PROMS at 1 year and 90 at 2 years. There was significant improvement in HOOS (p< 0.001) and OHS (p< 0.001) between the pre-operative, 1-year and 2-years outcomes. Patients also reported improved pain (p<0.001), function (p<0.001) and reduced stiffness (p<0.001) as measured by the WOMAC score. Patients had improved activity scores on the UCLA Active Score (p<0.001) with 53% reporting return to impact activity at 2 years. FJS at 1 and 2-years were not significantly different (p=0.38). There was no migration, osteolysis or loosening of any of the implants. The mean acetabular cup inclination angle was 41.3° and the femoral component shaft angle was 137°. No fractures were reported over the 2-year follow-up with only 1 patient reporting a sciatic nerve palsy. There was early return to impact activities in more than half our patients at 2 years with no early clinical or radiological complications related to the implant. Longer term follow-up with increased patient numbers are required to restore surgeon confidence in HRA and expand the use of this novel product. In conclusion, CoC resurfacing at 2-years post-operation demonstrate promising results with satisfactory outcomes in all recorded PROMS

Background:. Metal-on-metal total hip arthroplasty (THA) implants have been widely debated due to the adverse wear issue related to the bearing surfacing. However, more recent studies have shown that the high metal ion problems that occur after surgery with this type of implant may not be exclusively related to the all metal bearing surfaces, but mainly due to the recently modified connecting tapers. Biomet is one of few companies who have not changed their original taper design for their THA implants. The purpose of this study was to present our up to eight-year clinical results. Method:. Between November 2004 and April 2011, all of the 196 cases in 167 patients (77 male vs. 89 female) performed by a single surgeon were included in this study. The Biomet Magnum/Jumbo metal-on-metal total hip arthroplasty implants were utilized for all of the cases. The average age was 59 ± 11 years at the time of surgery. Thirteen patients deceased from causes unrelated to THA. The primary diagnosis was OA in 124 cases; followed by AVN in 41 cases, dysplasia in 12 cases and other causes in the remaining 19 cases. The average acetabular component sizes were 54 ± 4 mm. Clinical and radiographic examinations were performed prospectively, and the results were analyzed. Results:. The mean duration of follow-up was 5 ± 2 years. There were four revisions: 1) one was due to an adverse wear issue with a cobalt level of 109 μg/l and a chromium level of 77 μg/l. The primary diagnosis was OA for this case. The acetabular inclination angle was 65°. The acetabular component was revised using the Biomet Magnum Tri-Spike component with the acetabular inclination angle of 41°; one year after the surgery, the metal ion level results showed a cobalt level of 2.4 μg/l and a chromium level of 9.7 μg/l with a Harris hip score of 100. This patient also has a total knee replacement on the same side. 2) one due to acetabular component loosening; the HHS was 100 two years after the revision 3) twodue to deep infection; the HHS was 93 at one year and 100 atbthree years after the revision correspondingly. The metal ion results were available for 114 patients at the time of this study. Four patients had metal ion levels ≥ 7 μg/l; three out of these four patients' levels were ≥10 μg/l and one out of these four had levels ≥15 μg/l. Using failure of any component as the end point, the Kaplan-Meier Survival rate was 99.5% at five years and 96.7% at eight years for the whole group. Conclusions:. This study suggests that Biomet metal-on-metal THA showed a high success rate with a low adverse wear rate. Our clinical results may suggest that all metal bearing surfaces may not be the key to the recent adverse wear issue. The surgical technique and taper problems in other implants may be the major causes. Further studies need to confirm our results

Background: Metal-on-metal bearing hip replacements release between three and nine times more cobalt and chromium ions than a metal on polyethylene bearing hip replacement. We do not fully understand the cause for the variability of ion levels after metal on metal hip replacement. The factors that determine an individual’s levels of metal ions include: firstly, patient factors (renal failure, patient weight, high activity); secondly, manufacture factors (head size (and fluid film lubrication), carbide density, surface finish) and lastly study factors (bilateral implants, time from operation). Biomechanical studies suggest that component position, in particular acetabular inclination, is important for wear rate but there is no published correlation from clinical studies. Aim: To investigate the relationship between acetabular inclination angle and metal ion levels of patients with Birmingham Hip resurfacings. Methods: Using standardised radiographs, we measured the inclination angle (using UTHSCSA image tool) of the acetabular components in thirty-one patients (mean age 54 years) who underwent unilateral Birmingham hip resurfacing (mean time post operation of 22 months). We also measured peripheral whole blood chromium and cobalt ion concentrations using inductively coupled mass spectrometry. All components were well fixed. Results: There was a positive correlation between the inclination angle (range 28 degrees – 55 degrees) of the acetabular component and whole blood concentration of Cobalt (range 2.3 – 7 mcg/L), Chromium (range 0.56 – 4.3 mcg/L) and total metal ion levels (range 3.1 – 10.3 mcg/L). This finding was statistically significant, with a Pearson correlation coefficient of 0.46 (95% CI 0.13-0.70) and a p-value of 0.00398. Conclusion: Acetabular inclination angle is likely to be a factor in determining an individual’s metal ion levels in patients with metal on metal resurfacing. We also iden-tified a threshold level of 50 degrees inclination, after which the metal ion levels rise dramatically. We describe the possible biomechanical mechanisms to explain these results. We recommend surgeons implant the metal socket at an inclination angle of less than 50 degrees

We measured the orientation of the acetabular and femoral components in 45 patients (33 men, 12 women) with a mean age of 53.4 years (30 to 74) who had undergone revision of metal-on-metal hip resurfacings. Three-dimensional CT was used to measure the inclination and version of the acetabular component, femoral version and the horizontal femoral offset, and the linear wear of the removed acetabular components was measured using a roundness machine. We found that acetabular version and combined version of the acetabular and femoral components were weakly positively correlated with the rate of wear. The acetabular inclination angle was strongly positively correlated with the rate of wear. Femoral version was weakly negatively correlated with the rate of wear. Application of a threshold of > 5 μm/year for the rate of wear in order to separate the revisions into low or high wearing groups showed that more high wearing components were implanted outside Lewinnek’s safe zone, but that this was mainly due to the inclination of the acetabular component, which was the only parameter that significantly differed between the groups. We were unable to show that excess version of the acetabular component alone or combined with femoral version was associated with an increase in the rate of wear based on our assessment of version using CT

The aim of this study was to characterise noise associated with ceramic-on-ceramic total hip arthroplasty (THA). A questionnaire was constructed to assess noise associated with THA. 116 patients responded. All had ceramic-on-ceramic hybrid THA at Glasgow Royal Infirmary between 2005 and 2007 using a Trident prosthesis and Exeter stem. Oxford Hip Questionnaires (OHS) were also completed by the patients. 16.4% of respondents reported noise associated with their ceramic hip. The vast majority reported onset at least 1 year after implantation. The most common noise types were ‘clicking’ (47%) or ‘grinding’ (42%), while ‘squeaking’ was least frequently reported (11%). Noise was most commonly brought on by bending and during sit to stand movements. No correlation was identified between the incidence of noise and any patient specific factor or demographic variable. The mean OHS at questionnaire follow-up was 39 and there was no significant difference in OHS when comparing noisy and silent hips (p=0.65). Only 1 patient limited social or recreational activities and overall patients felt the noise had minimal effect on their quality of life. Acetabular component inclination angles were compared on post-operative x-rays. There was no significant difference (p=0.51) in inclination angles of the noisy (47.1°±6.3°, range 30–57°) and silent hips (47.8°±6.1°, range 35–68°). The groups were further analysed for deviation out with the desirable inclination range of 40–45°. Of the noisy hips, a total of 73% were out with this range compared to 63% in the silent hip group. The incidence of noise within this ceramic-on-ceramic THA group did not appear to be related to patient specific factors, patient reported outcome (OHS) or acetabular inclination angles. Subjective appraisal of the noise revealed that ‘squeaking’ was not common but patients tended to report ‘clicking’ and ‘grinding’ more. The precipitation of noise with bending activities reinforces a possible mechanical cause

Background. The position of the hip-joint centre of rotation (HJC) within the pelvis is known to influence functional outcome of total hip replacement (THR). Superior, lateral and posterior relocations of the HJC from anatomical position have been shown to be associated with greater joint reaction forces and a higher incidence of aseptic loosening. In biomechanical models, the maximum force, moment-generating capacity and the range of motion of the major hip muscle groups have been shown to be sensitive to HJC displacement. This clinical study investigated the effect of HJC displacement and acetabular cup inclination angle on functional performance in patients undergoing primary THR. Methods. Retrospective study of primary THR patients at the RNOH. HJC displacement from anatomical position in horizontal and vertical planes was measured relative to radiological landmarks using post-operative, calibrated, anterior-posterior pelvic radiographs. Acetabular cup inclination angle was measured relative to the inter-teardrop line. Maximum range of passive hip flexion, abduction, adduction, external and internal rotation were measured in clinic. Patient reported functional outcome was assessed by Oxford Hip Score (OHS) and WOMAC questionnaires. Data analysed using a linear regression model. Results. 109 THRs were studied in 104 patients (69 Female). Mean age at THR=63 years (22-88). Mean follow-up=17 months (11-39 months). Median OHS=16, WOMAC=8. Increasing vertical HJC displacement (in either superior or inferior direction) from anatomical position was associated with worsening OHS (p<0.05) and WOMAC scores (p<0.05) and a reduced range of passive hip flexion (p<0.05). No relationship was found between either horizontal HJC displacement or acetabular cup inclination angle and patient functional outcome. Conclusion. A significant relationship was identified between increasing vertical displacement of the HJC and worsening patient functional outcome. This supports current opinion regarding the disadvantageous consequences of a superiorly displaced HJC in terms of survivorship and function. We therefore advocate an anatomical restoration of HJC position wherever possible

Protrusio acetabuli can be either primary or secondary. Primary or idiopathic protrusio is a rare condition of unknown etiology. Secondary protrusio may be associated with rheumatoid arthritis, ankylosing spondylitis, osteoarthritis, osteomalacia, trauma and Paget's disease. Challenges in surgery include: lack of bone stock, deficient medial support to the cup, difficulty in dislocating the femoral head, and medialization of the hip joint center. Several surgical techniques have been described: use of cement alone without bone graft; morselised impacted autograft or allograft with a cemented cup; metal cages, reinforcement rings, and solid grafts. We describe our technique of impaction grafting using autologous bone and a cementless porous-coated hemispherical cup without the use of acetabular rings or cages in patients with an average age of 46 years. Protrusion was graded depending on distance of medial wall from Kohler's line as mild (1–5 mm medial), moderate (6–15 mm medial) and severe if it was more than 15 mm medial to the Kohler's line. All patients were operated in the lateral position using a modified Hardinge's anterolateral approach. Adductor tenotomy may be required in cases of severely stiff hips. After careful dislocation of the femoral head, it was sectioned in situ into slivers to facilitate obtaining the graft. The periphery was reamed and care was taken to preserve the membrane lining the floor of the defect. Morselised graft was impacted with hemispherical impactors and the trial cup 1–2 mm larger than the last reamer placed in the desired position. The final socket was then inserted. Femoral preparation was performed in routine fashion. The mean pre-operative Harris Hip Score of 52 improved to 85 points at a mean follow up of 4 years. The average acetabular inclination angle was 42 degrees. Our results have shown incorporation of the graft in all cases. There was no evidence of progression of the protrusio or cup loosening in any of the cases. Thus far, our hips have not shown osteolytic lesions. The technique described is a satisfactory biological solution of restoring bone stock particularly in young and middle-aged patients

INTRODUCTION. Traditionally, acetabular component insertion in direct anterior approach (DAA) total hip arthroplasty (THA) has been performed using fluoroscopic guidance. Handheld navigation systems can be used to address issues of alignment, cup placement and accuracy of measurements. Previous navigation systems have been used successfully in total knee arthroplasty (TKA) and has now been introduced in THA. We investigated the use of a new accelerometer-based, handheld navigation system during DAA THA to compare it to traditional means. This study aims to determine accuracy of acetabular cup placement as well as fluoroscopy times between two groups of patients. METHODS. Data was prospectively collected for a group of consecutive DAA THA procedures using a handheld navigation system (n=45) by a single surgeon. This was compared to data retrospectively collected for a group that underwent the same procedure without use of the navigation system(n=50). The time for use of the navigation system, including insertion of pins/registration, guiding cup position, and removal of pins, was recorded intraoperatively. Postoperative anteroposterior and cross-table lateral radiographs were used to measure acetabular inclination and anteversion angles. Targeted angles for all cases were 40° ±5 for inclination and 20° ±5 for anteversion. Intraoperative fluoroscopy exposure times were obtained from post-anesthesia care unit radiographs. RESULTS. Mean time of pin insertion/registration, cup positioning and removal was 180.5 seconds, 127.7 seconds and 26 seconds, giving a mean total time of 5.6 minutes. There were no significant differences in mean postoperative acetabular inclination angles between the navigation group as compared to the non-navigation group (39.8° vs 40.6°) (p = .2). There were no significant differences in mean postoperative acetabular anteversion angles between the navigation group as compared to the non-navigation group (24.3° vs 23.7°) (p=.5). Mean intraoperative fluoroscopy exposure times were significantly lower in the navigation group as compared to the non-navigation group (12.6 vs 22.2 seconds) (p<.0001). CONCLUSION. The findings demonstrated that a new handheld navigation system required minimal increase in operative time and was as accurate for cup positioning as fluoroscopically assisted DAA THA. Furthermore, there was a 45% reduction in fluoroscopy exposure time. Reduction in fluoroscopy time will lower radiation exposure for the surgeon and patients

Medical and Health care products Regulatory Agency (MHRA) released an alert in 2010 regarding metal on metal (MoM) bearings in hip arthroplasty owing to soft tissue reactions to Metal debris. Following this, we adopted a targeted screening protocol to review patients with this bearing couple. 218 Patients (252 hips), mean age 53.2 (25–71) years were assessed clinically using Oxford hip score (OHS) and X-ray examination. The mean follow up was 44.5 (12–71) months. Patients were considered at higher risk (118 patients/133 hips) if they had deterioration of OHS (50 hips), Small sized heads <50mm (114 hips), acetabular inclination >500 (37 hips), neck thinning (17 hips). These patients (107/118), (120/133 hips) were further investigated through measuring metal ion levels and magnetic resonance imaging (MRI). The mean blood levels of cobalt and chromium in this group were 6.7, 8.62 ug/L respectively. Metal ions increased significantly with high acetabular inclination angles (p=0.01, 0.004 respectively), but was not affected by the size of the head (p=0.13). MRI showed periprosthetic lesions around 28 hips (26 fluid collections, 2 pseudotumours). The screening protocol detected all patients who subsequently required elective revision. We believe that this protocol was beneficial in detecting problematic MoM hip replacements

Introduction. Studies of metal-on-metal (MoM) hip resurfacing arthroplasty (HRA) have reported high complication and failure rates due to elevated metal ion levels. These rates were shown to be especially high for the Articular Surface Replacement (ASR) HRA, possibly due to its unique design. Associations between metal ion concentrations and various biological and mechanical factors have been reported. Component positioning as measured by acetabular inclination has been shown to be of especially strong consequence in metal ion production in ASR HRA patients, but few studies have evaluated acetabular anteversion as an independent variable. The primary objective of this study was to evaluate the associations between component orientation, quantified by acetabular inclination and anteversion, and blood metal ions. Secondly, we sought to report whether conventional safe zones apply to MoM HRA implants or if these implants require their own positioning standards. Methods. We conducted a multi-center, prospective study of 512 unilateral ASR HRA patients enrolled from September 2012 to June 2015. At time of enrollment our patients were a mean of 7 (3–11.5) years from surgery. The mean age at surgery was 56 years and 24% were female. All subjects had complete demographic and surgical information and blood metal ions. In addition, each patient had valid AP pelvis and shoot-though lateral radiographs read by 5 validated readers measuring acetabular abduction and anteversion, and femoral offset. A multivariate logistic regression was used with high cobalt or chromium (greater than or equal to 7ppb) as the dependent variable. The independent variables were: female gender, UCLA activity score, age at surgery, femoral head size, time from surgery, femoral offset, acetabular abduction, and acetabular anteversion. Results. The average acetabular inclination angle was found to be 44.7° (20.6°–64.5°), and the average anteversion angle was 24° (0.2°–55.3°) (Figure 1). After controlling for the possible confounding variables, the factors contributing to elevated metal ions (≥ 7 ppb) were found to be time from surgery (OR = 1.29, p = 0.011), high abduction angle (– 55°) (OR = 4.40, p = 0.001), low anteversion angle (0°–10°) (OR = 3.82, p = 0.001), and female gender (OR = 3.45, p = 0.001). Discussion and Conclusion. We found that blood metal ion levels are affected by both acetabular inclination and anteversion (Figure 2). Furthermore, we observed that there was a high degree of variation in the positioning of these implants, and we conclude that those with high inclination and/or low anteversion angle should be most vigilantly monitored

A review of the first two hundred and ten patients undergoing Birmingham hip re-surfacing between January 2003 and June 2005 was performed. All surgeries were performed by a single consultant orthopaedic surgeon. All resurfacings were carried out utilising the antero-lateral approach to the hip. Mean review post-operatively was at six weeks. The following clinical parameters were evaluated: length of in-hospital patient stay, intra-operative blood loss and post-operative range of joint movement. In addition, the following radiological measurements were made: the acetabular inclination angle, the head-shaft angle and evidence of leg-length discrepancy. One patient experienced fracture of the femoral neck and two other patients underwent revision surgery. Our results demonstrate that the anterolateral approach represents an alternative approach, with short-term results comaprible to the posterior approach for hip resurfacing

The link between squeaking and ceramic on ceramic (CoC) bearings has been widely reported in orthopaedic literature and is described as a hard bearing phenomenon. We aim to look at the incidence of noise in CoC bearings compared to Metal on Polyethylene (MoP) bearing, which have yet to be linked to squeaking. We developed a noise characterizing hip questionnaire and sent that along with the Oxford Hip Score (OHS) to 1000 patients; 3:2 ratio of CoC to MoP. 282 CoC patients and 227 MoP patients returned the questions: 509 patients in total. Our patient database provided details on femoral head size and the acetabular inclination angle, for each respondent. 47 (17%) of the CoC hip patients reported noise compared to 19 (8%) of the MoP hip patients (P=0.054). 9 CoC patients and 4 MoP patients reported squeaking, while clicking was the most frequent answer in both groups. 27% patients with noise reported avoiding recreational activities because of it. Patient's with noisy hips scored on average, 5 points worse in the OHS (CoC: P = 0.04 and MoP: P = 0.007) and were on average 5 years younger (CoC: P<0.001 and MoP: P=0.007). No correlation was found between noisy hips and femoral head size or inclination angle. The squeaking hip phenomenon is not exclusive to hard bearing THA. Noise from patient's hips may have social implications and this should be highlighted when consenting a patient for either of these hip procedures. In both implants, we showed there to be a correlation between noise production and a lower OHS. However, longer follow up studies are needed to link noise to a poorly functioning implant

Protrusio acetabuli can be either primary or secondary. Primary or idiopathic protrusio is a rare condition of unknown etiology. Secondary protrusio may be associated with rheumatoid arthritis, ankylosing spondylitis, osteoarthritis, osteomalacia, trauma and Paget's disease. Challenges in surgery include lack of bone stock, deficient medial support to the cup, difficulty in dislocating the femoral head, and medialisation of the hip joint center. Several surgical techniques have been described: use of cement alone without bone graft; morsellised impacted autograft or allograft with a cemented cup; metal cages, reinforcement rings, and solid grafts. We describe our technique of impaction grafting using autologous bone and a cementless porous-coated hemispherical cup without the use of acetabular rings or cages in patients with an average age of 46 years. Protrusion was graded depending on distance of medial wall from Kohler's line as mild (1–5mm medial), moderate (6–15mm medial) and severe if it was more than 15mm medial to the Kohler's line. All patients were operated in the lateral position using a modified Hardinge's anterolateral approach. Adductor tenotomy may be required in cases of severely stiff hips. After careful dislocation of the femoral head, it was sectioned in situ into slivers to facilitate obtaining the graft. The periphery was reamed and care was taken to preserve the membrane lining the floor of the defect. Morsellised graft was impacted with hemispherical impactors and the trial cup 1–2mm larger than the last reamer placed in the desired position. The final socket was then inserted. Femoral preparation was performed in routine fashion. The mean preoperative Harris hip score of 52 improved to 85 points at a mean follow up of 4 years. The average acetabular inclination angle was 42 degrees. Our results have shown incorporation of the graft in all cases. There was no evidence of progression of the protrusio or cup loosening in any of the cases. Thus far, our hips have not shown osteolytic lesions. The technique described is a satisfactory biological solution of restoring bone stock particularly in young and middle-aged patients

Background. High cup abduction angles generate increased contact stresses, higher wear rates and increased revision rates. However, there is no reported study about the influence of cup abduction on stresses under head lateralisation conditions for ceramic-on-Ceramic THA. Material and method. A finite elements model of a ceramic-on-ceramic THA was developed in order to predict the contact area and the contact pressure, first under an ideal regime and then under lateralised conditions. A 32 mm head diameter with a 30 microns radial clearance was used. The cup was positioned with a 0°anteversion angle and the abduction angle was varied from 45° to 90°. The medial-lateral lateralisation was varied from 0 to 500 microns. A load of 2500 N was applied through the head center. Results. For 45° abduction angle, edge loading appeared above a medial-lateral separation of 30 μm. Complete edge loading was obtained above 60 μm medial-lateral separation. For 45 degrees inclination angle, as the lateralisation increased, the maximal contact pressure increased from 66 MPa and converged to an asymptotic value of 205 MPa. A higher inclination angle resulted in a higher maximum contact pressure. However, this increase in contact pressure induced by higher inclination angle, became negligible as the lateral separation increased. Discussion Both inclination angle and lateral displacement induced a large increase in the stresses in Ceramic-on-Ceramic THA. Edge loading appeared for a small lateralisation. The influence of acetabular inclination angle became negligible for a lateral displacement above 240 μm, as the stresses reached an asymptotic value