We found that adipose stem cells are poorly differentiated into bone and that their ability to differentiate into bone varies from cell line to cell line. The osteogenic differentiation ability of the adipose stem cell lines was distinguished through Alzarin Red Staining, and the cell lines that performed well and those that did not were subjected to RNA-seq analysis. The selected gene GSTT1 (glutathione S-transferase theta-1) gene is a member of a protein superfamily that catalyzes the conjugation of reduced glutathione to a variety of hydrophilic and hydrophobic compounds. The purpose of this study is to treat avascular necrosis and bone defect by improving bone regeneration with adipose stem cells introduced with a new GSTT1 gene related to osteogenic differentiation of adipose stem cells. In addition, the GSTT1 gene has the potential as a genetic marker that can select a specific cell line in the development of an adipose stem cell bone regeneration drug. Total RNA was extracted from each sample using the TRIzol reagent. Its concentration and purity were determined based on A260 and A260/A280, respectively, using a spectrophotometer. RNA sequencing library of each sample was prepared using a TruSeq RNA Library Prep Kit. RNA-seq experiments were performed for hADSCs. Cells were transfected with either GSTT1 at 100 nM or siControl (scramble control) by electroporation using a 1050 pulse voltage for 30 ms with 2 pulses using a 10 μl pipette tip. The purpose of this study is to discover genetic markers that can promote osteogenic differentiation of adipose stem cells (hADSCs) through mRNA-seq gene analysis. The selected GSTT1 gene was found to be associated with the enhancement of osteogenic differentiation of adipose stem cells. siRNA against GSTT1 reduced osteogenic differentiation of hADSCs, whereas GSTT1 overexpression enhanced osteogenic differentiation of hADSCs under osteogenic conditions. In this study, GSTT1 transgenic adipose stem cells could be used in regenerative medicine to improve bone differentiation. In addition, the GSTT1 gene has important significance as a marker for selecting adipose stem cells with potential for bone differentiation in the development of a therapeutic agent for bone regeneration cells

Articular cartilage is often damaged, and its treatment is usually performed by surgical operation. Today, tissue engineering offers an alternative treatment option for injuries or diseases with increasing importance. Infrapatellar fat pad (IPFP) is a densely vascularized and innervated extra synovial tissue that fills the anterior knee compartment. Adipose-derived stem cells from infrapatellar fat pad (IPFP-ASCs) have multipotency means that they can differentiate into connective tissue cells and have age-independent differentiation capacity as compared to other stem cells.

In this study, the osteochondral tissue construct was designed with different inner pattern due to original osteochondral tissue structure and fabrication of it was carried out by 3D printing. For this purpose, alginate (3% w/v) and carboxymethylcellulose (CMC) (9%w /v) were used as bioink. Also, IPFP-ASCs were isolated with enzymatic degradation. Osteogenic and chondrogenic differentiation of IPFP-ASCs were investigated with Alizarin Red and Alcian Blue staining, respectively. IPFP-ASCs-laden osteochondral graft differentiation will be induced by controlled release of growth factor BMP-2 and TGF-β. Before this step, nanocapsules formation with double emission technique with model protein BSA was carried out with different concentration of PCL (5%,10% and 20%).

The morphology and structure of the nanocapsules were determined with scanning electron microscopy (SEM). Also, we successfully designed and printed alginate and CMC based scaffold with 20 layers. Chondrogenic and osteogenic differentiation of IPFP-ASCs with suitable culture conditions was obtained.

The isolation of IPFP-ASCs, formation of the nanocapsules, and 3D printing of osteochondral graft were carried out successfully.

Tendons display poor intrinsic healing properties and are difficult to treat[1]. Prior in vitro studies[2] have shown that, by targeting the Activin A receptor with magnetic nanoparticles (MNPs), it is possible to remotely induce the tenogenic differentiation of human adipose stem cells (hASCs). In this study, we investigated the tenogenic regenerative potential of remotely-activated MNPs-labelled hASCs in an in vivo rat model. We consider the potential for magnetic controlled nanoparticle mediated tendon repair strategies. hASCs were labelled with 250 nm MNPs functionalized with anti-Activin Receptor IIA antibody. Using a rapid curing fibrin gel as delivery method, the MNPs-labelled cells were delivered into a Ø2 mm rat patellar tendon defect. The receptor was then remotely stimulated by exposing the rats to a variable magnetic gradient (1.28T), using a customised magnetic box. The stimulation was performed 1 hour/day, 3 days/week up to 8 weeks. Tenogenesis, iron deposition and collagen alignment were assessed by histological staining and IHC. Inflammation mediators levels were assessed by ELISA and IHC. The presence of human cells in tendons after 4 and 8 weeks was assessed by FISH analysis. Histological staining showed a more organised collagen arrangement in animals treated with MNPs-labelled cells compared to the controls. IHC showed positive expression of tenomodulin and scleraxis in the experimental groups. Immunostaining for CD45 and CD163 did not detect leukocytes locally, which is consistent with the non-significant levels of the inflammatory cytokines analysis performed on plasma. While no iron deposition was detected in the main organs or in plasma, the FISH analysis showed the presence of human donor cells in rat tendons even after 8 weeks from surgery. Our approach demonstrates in vivo proof of concept for remote control stem cell tendon repair which could ultimately provide injectable solutions for future treatment. We are grateful for ERC Advanced Grant support ERC No.789119, ERC CoG MagTendon No.772817 and FCT grant 2020.01157.CEECIND

Worldwide, tendon disorders are one of the main causes of disability that decrease the quality of life of individuals and represent a substantial economic burden on society. Currently, the main therapies used for tendon injuries are not able to restore tendon functionality, and due to tendons' hypovascular and hypocellular nature, they present a reduced healing capacity, which also limits the success of the available therapies. In order to discover new therapies, extracellular vesicles (EVs), key players in cell-cell communication, have been widely explored for tissue engineering and regenerative medicine applications. Thus, the aim of this study is to assess the role of EVs derived from platelets in stem cell tenogenic commitment using a bioengineered tendon in vitro model for potential use as tendon therapeutic agents. Biomimetic platelet-derived EVs were produced by freeze-thaw cycles of platelets and isolation at different centrifugation speed. To recreate the architecture of tendons, a 3D system consisting of electrospun anisotropic nanofiber scaffolds coated with collagen encapsulating human adipose stem cells (hASCs) and different types of platelet-derived EVs, were produced. Then, the influence of the tendon-mimetic constructs and the distinct EVs populations in the hASCs tenogenic differentiation were assessed over culture time. We observed that the hASCs on the nanofibrous tendon scaffolds, show high cytoskeleton anisotropic organization that is characteristic of tenocytes. Moreover, acting as biological cues, platelet-derived EVs boosted hASCs tenogenic commitment, supported by the increased gene expression of tendon-related markers (SCX and TNMD). Additionally, EVs enhanced the deposition of tendon like extracellular matrix (ECM), as evidenced by the increased gene expression of ECM-related markers such as COL1, COL3, DCN, TNC, and MMP-3, which are fundamental for ECM synthesis and degradation balance. Moreover, EVs induced lower collagen matrix contraction on hASCs, which has been related with lower myofibroblast differentiation. Overall, the results revealed that EVs are capable of modulating stem cells' behavior boosting their tenogenic commitment, through the increased expression of healthy tendon cell markers, potentiating ECM deposition and decreasing cell contractility. Therefore, platelet EVs are a promising biochemical tool, worthy to be further explored, as paracrine signaling that might potentiate tendon repair and regeneration

Tissue engineering and regenerative medicine (TERM) hold the promise to provide therapies for injured tendons despite the challenging cues of tendon niche and the lack of specific factors to guide regeneration. The emerging potential of magnetic responsiveness and magnetic nanoparticles (MNPs) functionalities offers new perspectives to tackle TERM challenges. Moreover, pulsed electromagnetic field (PEMF) is FDA approved for orthopaedics with potential to control inflammation upon injury. We previously demonstrated that magnetic cell-sheets assisted by PEMF trigger the inflammation resolution by modulating cytokine-enriched environments [1]. To further understand the potential of magnetically assisted living patches, we have recently conducted in vivo studies using a rat patellar defect model. After labeling of human adipose stem cells with iron oxide MNPs for 16h, magCSs were cultured up to 3 days in α-MEM medium under non-magnetic or PEMF conditions. MagCSs were evaluated by immunocytochemistry, and real time RT-PCR for tendon markers. Cell metabolic activity was also assessed by MTS and ECM proteins quantified by Sirius Red/Fast Green. The MagCSs effect in ameliorating healing was assessed after implantation in window defects created in the patellar tendon of rats. PEMF was externally applied (3mT, 70Hz) 3d/week for 1h (magnetotherapy). After 4 and 8w, tendons were histologically characterized for immune-detection of tendon and inflammatory markers, and for Perls van Gieson and HE stains. Blood and detoxification organs were screened for inflammatory mediators and biodistribution of MNPs, respectively. In vitro results suggest that PEMF stimulates cellular metabolic activity, influences protein synthesis and the deposition of collagen and non-collagenous proteins is significantly increased compared to non-magnetic conditions. No adverse reactions, as infection or swelling, were observed after surgery or during follow-up. After 8w, magCSs remained at the implantation site and no MNPs were detected on detoxification organs. Plasma levels of IL1α, β, IL6 and TNFα assessed by multiplex assay were below detectable values (<12.5pg/ml). Thus, the combination of cell sheets and magnetic technologies hold promise for the development of living tendon substitutes. Acknowledgement to ERC-COG MagTendon772817, H2020 Achilles 810850, FCT - 2020.01157.CEECIND

Critical size bone defects pose a serious clinical problem, as the intrinsic healing capacity of bone fails due to the size of the defect. Bone healing might be aided by addition of 1,25(OH)2 vitamin D3 (vitD3) to bone tissue engineering scaffolds. VitD3can promote osteogenic differentiation of human stem cells such as adipose stem cells (hASCs), which is a clinical-relevant source of mesenchymal stem cells. However, it is unknown which release kinetics of vitD3, i.e. short or sustained release from scaffolds, leads to the most optimal osteogenic differentiation of hASCs. We hypothesized that sustained release of vitD3 leads to more osteogenic differentiation of hASCs than shorter applications. hASCs (1×105, passage 3–4) were seeded on 20 ± 1 mg of calcium phosphate particles (day 0), cultured for 20 days, and treated with a total amount of 124 ng vitD3. This treatment was provided either during 30 min before seeding (pre-incubation, short stimulation: [200 nM]), after seeding, over the first 2 days (burst- release high: [100 nM]), or over the total culture period of 20 days (sustained-release: [10 nM]). In the extra condition: burst-release low the hASCs were treated for 2 days after seeding with 6.2 ng vitD3 ([10 nM]) per day. Live/dead staining followed by fluorescent microscopy showed that hASCs attached to the calcium phosphate particles and were mostly viable (±75 %) at day 2. VitD3 applied for any duration did not affect the proliferation of hASCs at day 7 and day 20, measured with an alamar blue assay. At day 7, sustained-release increased the release of active alkaline phosphatase on average by 3.5-fold, compared to all the other conditions. At day 20, this was increased 4.3-fold. At both day 7 and day 20 total protein levels were similar in all conditions. Our results suggest that sustained release of VitD3 from bone tissue engineered scaffolds may be beneficial for the osteogenic differentiation of human stem cells for the treatment of critical bone size defects

Intervertebral disc degeneration can lead to physical disability and significant pain, while the present therapeutics still fail to biochemically and biomechanically restore the tissue. Stem cell-based therapy in treating intervertebral disc (IVD) degeneration is promising while transplanting cells alone might not be adequate for effective regeneration. Recently, gene modification and 3D-printing strategies represent promising strategies to enhanced therapeutic efficacy of MSC therapy. In this regard, we hypothesized that the combination of thermosensitive chitosan hydrogel and adipose derived stem cells (ADSCs) engineered with modRNA encoding Interleukin − 4 (IL-4) can inhibit inflammation and promote the regeneration of the degenerative IVD. Rat ADSCs were acquired from adipose tissue and transfected with modRNAs. First, the kinetics and efficacy of modRNA-mediated gene transfer in mouse ADSCs were analyzed in vitro. Next, we applied an indirect co-culture system to analyze the pro-anabolic potential of IL-4 modRNA engineered ADSCs (named as IL-4-ADSCs) on nucleus pulposus cells. ModRNA transfected mouse ADSCs with high efficiency and the IL-4 modRNA-transfected ADSCs facilitated burst-like production of bio-functional IL-4 protein. In vitro, IL-4-ADSCs induced increased anabolic markers expression of nucleus pulposus cells in inflammation environment compared to untreated ADSCs. These findings collectively supported the therapeutic potential of the combination of thermosensitive chitosan hydrogel and IL-4-ADSCs for intervertebral disc degeneration management. Histological and in vivo validation are now being conducted

Tendon injuries constitute a major healthcare burden owing to the limited healing ability of these tissues and the poor clinical outcomes of surgical repair treatments. Recent advances in tendon tissue engineering (TTE) strategies, particularly through the use of biotextile technologies, hold great promise toward the generation of artificial living tendon constructs. We have previously developed a braided construct based on suture threads coated with gelMA:alginate hydrogel encapsulating human tendon cells. These cell-laden composite fibers enabled the replication of cell and tissue-level properties simultaneously. Based on this concept, in this study we explored the use of platelet lysate (PL), a pool of supra-physiological concentrations of growth factors (GFs), to generate a hydrogel layer, which is envisioned to act as a depot of therapeutic factors to induce tenogenic differentiation of encapsulated human adipose stem cells (hASCs). For this purpose, commercially available suture threads were first embedded in a thrombin solution and then incubated in PL containing hASCs. Herein, thrombin induces the gelation of PL and consequent hydrogel formation. After coating suture threads with the mixture of PL-ASCs, cells were found to be viable and homogeneously distributed along the fibers. Strikingly, hASCs encapsulated within the PL hydrogel layer around the suture thread were able to sense chemotactic factors present in PL and to establish connections between adjacent independent fibers, suggesting a tremendous potential of PL cell-laden hydrogel fibers as building blocks in the development of living constructs aimed at tendon repair applications

Porcine and fish by-products in particular are rich sources for collagen, which is the main component of the extracellular matrix (ECM). Although there are studies investigating different collagen derived from various tissue sources for the purpose of creating biomaterials, the comparison of biophysical, biochemical and biological properties of type II collagen isolated from cartilaginous tissues has yet to be assessed. In addition, it has been shown from previous studies that sex steroid hormones affect the collagen content in male and female animals, herein, type II collagens from male and female porcine cartilage were assessed in order to investigate gender effects on the property of collagen scaffolds. Moreover, type II collagen has a supportive role in articular cartilage in the knee joint. Therefore, the aim is to assess the properties of type II collagen scaffolds as a function of species, tissue and gender for cartilage regeneration. Type II collagen was extracted from male and female porcine trachea, auricular, articular cartilage and cartilaginous fish through acid-pepsin digestion at 4°C. SDS-PAGE was conducted to confirm the purity of extracted collagen. Collagen sponges were created via freeze-drying. Scaffold structure and pore size were evaluated by scanning electron microscopy (SEM). Thermal stability was assessed by differential scanning calorimetry (DSC). Sponges were seeded with human adipose derived stem cells to assess chondro-inductive potential of collagen sponges after 7, 14 and 21 days of culture. In conclusion, collagen sponges support the proliferation and differentiation of human adipose derived stem cells to different extents

Osteoarthritis (OA) is a degenerative and inflammatory joint disease that affects the whole joint. Mesenchymal stem cells ability to secrete anti-inflammatory and immuno-modulatory factors represents an attractive tool in the treatment of OA. Considering the risk of cell leakage and the massive cell death upon intra-articular injection, we developed a micromolding protocol of encapsulation that allows to obtain particles that (i) could be injected with a 26G needle into a mouse joint and (ii) could provide a 3D microenvironment supporting cell biological activity. Polydimethylsiloxane (PDMS) chips containing circular micromolds were manufactured and a solution of alginate (2% w/v) containing human adipose stem cells (3 millions/mL) was deposited on the chips. Cell loading into the micromolds was performed either by sedimentation or by centrifugation. Following Ca2+ crosslinking, alginate particles (diameter 150±0.7μm) were obtained. The number of cells per particle was 5 times higher when the micromolds were loaded by centrifugation. Cell number and metabolic activity remained stable for 7 days after encapsulation and injection through a 26G needle had no impact on cell viability. When cells were stimulated with TNF-alpha and INF-gamma, prostaglandin E2 (PGE2) concentration in the supernatant was multiplied by 13 and 7 and indoleamine2,3-dioxygenase (IDO) activity was 2 and 4 times higher when cell loading was performed by sedimentation or centrifugation, respectively. We have demonstrated that encapsulated cells were able to sense and respond to an inflammatory stimulus and their therapeutic potential will be evaluated in a murine model of osteoarthritis

In the field of tissue engineering (TE), mainly two approaches have been widely studied and utilised throughout the last two decades. Ovsianikov et al. proposed a third strategy for tissue engineering to combine the advantages of the scaffold-based and scaffold-free approach [1]. We utilise the third strategy for TE by fabrication of cell spheroids that are reinforced by microscaffolds, called tissue units (TUs). Aim of the presented study is to differentiate TUs towards a chondrogenic phenotype to show the self-assembly of a millimetre sized cartilage-like tissue in a bottom-up TE approach in vitro. Two-Photon polymerization (2PP) was utilised to fabricate highly porous microscaffolds with a diameter of 300 µm. The biocompatible and biodegradable, resin Degrad INX (supplied from Xpect INX, Ghent, Belgium) was used for 3D-printing. Each microscaffold was seeded with 4000 human adipose derived stem cells (hASCs) in low-adhesive 96-well plates to allow spheroid formation. TUs were differentiated towards the chondrogenic lineage by application of chondrogenic media, subsequently merged in a cylindrical agarose mold, to fuse into a connected tissue with a diameter of ~1.8 mm and a height of 8 mm. The characterization of TUs differentiated towards the chondrogenic phenotype included gene expression and protein analysis. Furthermore, immunohistochemically staining for Collagen II and Alcian blue staining were performed to investigate the matrix deposition and fusion of the self-assembled tissue. Our results suggest that the utilised method could be a promising approach for a variety of tissue engineering approaches, due to the good applicability to a defect side combined with the self-assembly properties of the TUs. Furthermore, the differentiation potential of hASCs is not limited to chondrogenic lineages only, which could pave the way to further TE applications in the future. Acknowledgements:. This research work was financially supported by the European Research Council (Consolidator Grant 772464 A.O.)

Introduction. PIEZO mechanoreceptors are increasingly recognized to play critical roles in fundamental physiological processes like proprioception, touch, or tendon biomechanics. However, their gating mechanisms and downstream signaling are still not completely understood, mainly due to the lack of effective tools to probe these processes. Here, we developed new tailor-made nanoswitches enabling wireless targeted actuation on PIEZO1 by combining molecular imprinting concepts with magnetic systems. Method. Two epitopes from functionally relevant domains of PIEZO1 were rationally selected in silico and used as templates for synthesizing molecularly imprinted nanoparticles (MINPs). Highly-responsive superparamagnetic zinc-doped iron oxide nanoparticles were incorporated into MINPs to grant them magnetic responsiveness. Endothelial cells (ECs) and adipose tissue-derived stem cells (ASCs) incubated with each type of MINP were cultured under or without the application of cyclical magnetomechanical stimulation. Downstream effects of PIEZO1 actuation on cell mechanotransduction signaling and stem cell fate were screened by analyzing gene expression profiles. Result. Nanoswitches showed sub-nanomolar affinity for their respective epitope, binding PIEZO1-expressing ECs similarly to antibodies. Expression of genes downstream of PIEZO1 activity significantly changed after magnetomechanical stimulation, demonstrating that nanoswitches can transduce this stimulus directly to PIEZO1 mechanoreceptors. Moreover, this wireless actuation system proved effective for modulating the expression of genes related to musculoskeletal differentiation pathways in ASCs, with RNA-sequencing showing pronounced shifts in extracellular matrix organization, signal transduction, or collagen biosynthesis and modification. Importantly, targeting each epitope led to different signaling effects, implying distinct roles for each domain in the sophisticated function of these channels. Conclusion. This innovative wireless actuation technology provides a promising approach for dissecting PIEZO-mediated mechanobiology and suggests potential therapeutic applications targeting PIEZO1 in regenerative medicine for mechanosensitive tissues like tendon. Acknowledgements. EU's Horizon 2020 ERC under grant No. 772817 and Horizon Europe under grant No. 101069302; FCT/MCTES for PD/BD/143039/2018, COVID/BD/153025/2022, 10.54499/2020.03410.CEECIND/CP1600/CT0013, 10.54499/2022.05526.PTDC, 10.54499/UIDB/50026/2020, 10.54499/UIDP/50026/2020, and 10.54499/LA/P/0050/2020

Tendon diseases are prevalent health concerns for which current therapies present limited success, in part due to the intrinsically low regenerative ability of tendons. Therefore, tissue engineering presents a potential to improve this outcome. Here, we hypothesize that a concurrent control over both biophysical and biochemical stimuli will boost the tenogenic commitment of stem cells, thus promoting regeneration. To achieve this, we combine molecularly imprinted nanoparticles (MINPs), which act as artificial amplifiers for endogenous growth factor (GF) activity, with bioinspired anisotropic hydrogels. 2. to manufacture 3D tenogenic constructs. MINPs were solid phase-imprinted using a TGF-β3 epitope as template and their affinity for the target was assessed by SPR and dot blot. Magnetically-responsive microfibers were produced by cryosectioning electrospun meshes containing iron oxide nanoparticles. The constructs were prepared by encapsulating adipose tissue-derived stem cells (ASCs), microfibers, and MINPs within gelatin hydrogels, while aligning the microfibers with an external magnetostatic field during gelation. This allows an effective modulation of hydrogel fibrillar topography, mimicking the native tissue's anisotropic architecture. Cell responses were analyzed by multiplex immunoassay, quantitative polymerase chain reaction, and immunocytochemistry. MINPs showed an affinity for the template comparable to monoclonal antibodies. Encapsulated ASCs acquired an elongated shape and predominant orientation along the alignment direction. Cellular studies revealed that combining MINPs with aligned microfibers increased TGF-β signaling via non-canonical Akt/ERK pathways and upregulated tendon-associated gene expression, contrasting with randomly oriented gels. Immunostaining of tendon-related proteins presented analogous outcomes, corroborating our hypothesis. Our results thus demonstrate that microstructural cues and biological signals synergistically direct stem cell fate commitment, suggesting that this strategy holds potential for improving tendon healing and might be adaptable for other biological tissues. The proposed concept highlights the GF-sequestering ability of MINPs which allows a cost-effective alternative to recombinant GF supplementation, potentially decreasing the translational costs of tissue engineering strategies. Acknowledgements: The authors acknowledge the funding from the European Union's Horizon 2020 under grant No. 772817; from FCT/MCTES for scholarships PD/BD/143039/2018 & COVID/BD/153025/2022 (S.P.B.T.), and PD/BD/129403/2017 (S.M.B.), co-financed by POCH and NORTE 2020, under the Portugal 2020 partnership agreement through the European Social Fund, for contract 2020.03410.CEECIND (R.M.A.D.) and project 2022.05526.PTDC; and from Xunta de Galicia for grant ED481B2019/025 (A.P.)

The in vitro mimicking of bone microenvironment for the study of pathologies is a challenging field that requires the design of scaffolds with suitable morphological, structural and cytocompatible properties. During last years, 3D in vitro tumour models have been developed to reproduce mechanical, biochemical and structural bone microenvironment elements, allowing cells to behave as in vivo. In this work, gas foamed polyether urethane foams (PUF) and 3D printed thermoplastic polyether urethane (3DP-PU) designed with different patterns are proposed as scaffolds for in vitro model of bone tissue. Surface coatings for a biomimetic behaviour of the 3D scaffold models were also investigated. Morphological, chemico-physical, mechanical properties, and biological in vitro behaviour were investigated. PUFs for metastases investigation. The suitability of PUF as 3D in vitro model to study the interactions between bone tumour initiating cells and the bone microenvironment was investigated. PUF open porosity (>70%) appeared suitable to mimic trabecular bone structure. Human adipose derived stem cells (ADSC) were cultured and differentiated into osteoblast lineage on the PU foam, as confirmed by Alizarin Red staining and RT-PCR, thus offering a bone biomimetic microenvironment to the further co-culture with bone derived tumour-initiating cells (MCFS). Tumour aggregates were observed after three weeks of co-culture by e-cadherin staining and SEM; modification in CaP distribution was identified by SEM-EDX and associated to the presence of tumour cells. 3DP-PU as tumour bone model. 3D printed scaffolds have pores with a precise and regular geometry (0°-90°, 0°-45°-90°-135°, 0°-60°-120°). PU scaffold porosity evidenced values from 55 to 67%, values that belong to the porosity range of the trabecular bone tissue (30-90%). The compressive modulus varied between 2 and 4 MPa, depending on the printed pattern. Biomimetic nanostructured coating was performed on 0-90° 3DP-PU by Ionized Jet Deposition. Coatings had a submicrometric thickness, variable tuning deposition time, nanostructured surface morphology and biomimetic composition. Coating on 3DP-PU promoted cells colonization of the whole porous scaffolds, compared to the controls, where cells concentrated mostly on the outer layers. In conclusion, based on the obtained results, scaffolds with different geometries have been successfully produced. Morphological and structural properties of the scaffolds here presented are suitable for mimicking the bone tissue, in order to produce a 3D in vitro model useful for bone pathologies research

Tendon injuries are a worldwide problem affecting several age groups and stem cell based therapies hold potential for tendon strategies guiding tendon regeneration. Tendons rely on mechano-sensing mechanisms that regulate homeostasis and influence regeneration. The mechanosensitive receptors available in cell membranes sense the external stimuli and initiate mechanotransduction processes. Activins are members of the TGF-β superfamily which participate in several tendon biological processes. It is envisioned that the activation of the activin receptor, trigger downstream Smad2/3 pathway thus regulating the transcription of tenogenic genes driving stem cell differentiation. In this work, we propose to target the Activin receptor type IIA (ActRIIA) in human adipose stem cells (hASCs), inducing hASCs commitment towards the tenogenic lineage. Since mechanotransduction can be remotely triggered through magnetic actuation combined with magnetic nanoparticles (MNPs), we stimulated hASCs tagged complexes using a vertical oscillating magnetic bioreactor (MICA Biosystems Ltd). Carboxyl functionalised MNPs (Micromod) were coated with anti-ActRIIA antibody (Abcam) by carbodiimide activation. hASCs were then cultured with MNPs-anti-ActRIIA for 14days with or without magnetic exposure (1Hz, 1h/every other day). hASCs cultured alone in αMEM (negative control) or in αMEM supplemented with ActivinA (R&D systems) (positive control of ActRIIA activation) were used as experimental controls. The tenogenic commitment of hASCs was assessed by real time RT-PCR, immunocytochemistry and quantification of collagen and non-collagenous proteins. Moreover, the phosphorylation of Smad2/3 was also evaluated on hASCs incubated for 2, 10, or 30min under magnetic stimulated (1Hz) and non-stimulated conditions. The increased gene expression of tendon related markers and higher ECM proteins deposition suggests that remote magnetic activation of ActRIIA promotes effectively hASCs tenogenic commitment. Furthermore, the detection of phospho-Smad2/3 proteins by ELISA (Cell Signaling Technology) was significantly more intense after 10min in hASCs under magnetic stimulation and in comparison to the control groups. These outcomes suggest that ActRIIA is a mechanosensitive receptor that can be remotely activated upon magnetic stimulation. In conclusion, remotely activation of MNPs tagged hASCs has potential for modulating tenogenic differentiation of stem cells envisioning successful cell therapies for tendon regeneration. Acknowledgements. FCT/MCTES PD/59/2013 (fellowship PD/BD/113802/2015), FCT post-doctoral grant SFRH/BPD/111729/2015, FCT grant IF/00685/2012, and EU-ITN MagneticFun

Adipose derived mesenchymal stromal cells (ASC) are adult stem cells exhibiting functional properties that have open the way for cell-based clinical therapies. Primarily, their capacity of multilineage differentiation has been explored in a number of strategies for skeletal tissue regeneration. More recently, MSCs have been reported to exhibit immunosuppressive as well as healing capacities, to improve angiogenesis and prevent apoptosis or fibrosis through the secretion of paracrine mediators. Among the degenerative diseases associated with aging, osteoarthritis is the most common pathology and affects 16% of the female population over 65 years. Up to now, no therapeutic option exists to obtain a sustainable improvement of joint function beside knee arthroplasty. This prompted us to propose adipose derived stem cells as a possible cell therapy. We performed pre-clinical models of osteoarthritis and showed that a local injection of ASC showed a reduction of synovitis, reduction of osteophytes, joint stabilization, reducing the score of cartilage lesions. This work was completed by toxicology data showing the excellent tolerance of the local injection of ADSC and biodistribution showing the persistence of cells after 6 months in murine models. The aim of the ADIPOA trial is to demonstrate the efficacy of adipose derived stem cells therapy in knee osteoarthritis (OA) in a phase 2/3 controlled multicenter study controlled against standard of care. Safety and feasibility as well as dose response was previously assessed in the ADIPOA FP7 project. The bi-centric phase I clinical trial in Montpellier (France) and Würzburg (Germany) included 18 patients with moderate to severe knee OA, each patient received a single injection of autologous ADSC, in a open scale up dose trial, starting form 2 10 6 cells to 50 106 cells. The 107 dose appears to be well tolerated and showed preliminary response in terms of decreasing local inflammation. This first study confirmed the feasibility and safety of local injection of ADSC in knee OA and suggested the most effective dose (107 autologous ADSC). This work constituted a significant step forward treating this disease with ADSC to demonstrate safety of the procedure. we conduct a prospective multicenter randomized Phase 2/3 study with 86 patients with moderate to severe knee OA to demonstrate superiority of stem cell-based therapy compared to standard of care (SOC) in terms in reduction in clinical symptoms (WOMAC score) and structural benefit (assessed by T1rhoMRI that allow quantification of cartilage proteoglycan content). This project will offer EU a unique leadership in OA with strong positions in EU and US due to patents and quality of the methodology to demonstrate efficiency of ADSC. ADIPOA brings together a unique combination of expertises and leaders in clinical rheumatology, MRI specialists, Stem cell Institutes, national GMP grade adipose derived stem cell production platform (ECELLFRANCE) and SME specialized in cell therapy trials in the EU. The production of the cells will be granted to EFS through ECELLFRANCE national platform, which have the GMP facility and will work as a contracting manufacturing organization. The expertise, leadership and critical mass achieved by this Consortium should enable breakthroughs in ASC engineering directly amenable for clinical applications in OA

Introduction and Objective. Osteoarthritis (OA) represents one of the leading cause of disability all over the world. Cell therapies, mainly based on mesenchymal stem cells (MSCs), have shown to modulate the pathogenesis of OA in basic, preclinical and clinical studies. Adipose tissue (AT) have emerged as a rich and promising source of MSCs called adipose derived stem cells (ASCs). Different systems are available for processing lipoaspirate to purify the samples from oily and haemorrhagic fractions, minimizing the risk of complications and maximizing the biological yield for subsequent grafting. However, few studies compared the efficacy of the different processing devices already used in clinical practice. This study aims to characterize the products obtained by the use of two different systems such as micro-fragmentation or nano-fragmentation comparing them with the starting material (AT) and the collagenase isolated ASCs. Materials and Methods. AT from 12 donors arrived without selection to the laboratories: 4 lipoaspirated (LA), 4 micro-fragmented (mF) and 4 nano-fragmented (nF). The samples were divided into three aliquots for paraffin embedding, RNA extraction and digestion with collagenase for ASCs isolation. Paraffin embedded tissue sections were stained with hematoxylin-eosin to analyze morphology. RNA was extracted, retro-transcribed and analyzed with real-time PCR to analyze the expression of pluripotency genes (SOX2, NANOG and POU5F1) and inflammatory genes (IL-1beta and iNOS). Data were analyzed using Graphpad Prism 8.0 and expressed as mean ± SD. One-way ANOVA followed by Tukey test was used to compare the different groups. Results. The LA comprised small lobules, with intact cell membranes and structurally integer adipocytes. mF samples showed the presence of integer adipocytes, small lobules and higher amount of cell clusters. nF samples showed the almost completely absence of adipocytes, a high amount of cells without lipid content and a high amount of stromal matrix. Real-time PCR results showed the lowest expression levels of pluripotency genes in LA samples that were assumed equal to 1.0 and used to calculate the expression levels of the other samples. mF showed expression levels of pluripotency genes similar to AT. nF showed expression levels of pluripotency genes higher than AT and mF, but without statistically significant differences. ASCs showed statistically significant higher expression levels of these genes compared to LA and mF (p ≤ 0.001). Likewise, the expression of inflammatory genes resulted to be lowest in LA samples (assumed equal to 1.0), higher in mF samples and in nF samples without statistical significance. As expected, the highest values were found in ASCs isolated cells compared to all the other samples (p ≤ 0.0001). Conclusions. These results confirmed that micro-fragmentation (mF) and nano-fragmentation (nF) permitted to separate a cell mixture enriched in ASCs from a lipoaspirate sample without activating the inflammatory pathways. Both processing methods gave a minimally manipulated product suitable for OA cell therapy application. Further studies are needed to elucidate possible different activities of the ASCs enriched AT-derivatives

One of the latest trends in the field of tissue engineering is the development of in vitro 3D systems mimicking the target tissue or organ and thus recapitulating the tridimensional structure and microenvironment experienced by cells in vivo. Interestingly, certain tissues are known to be regulated by endogenous bioelectrical cues, in addition to chemical and mechanical cues. One such tissue is the bone. It has, indeed, been demonstrated to exhibit piezoelectric properties in vivo, with electrical signaling playing a role in its formation during the early embryo developmental stages. Electrical stimulation has been proven to sustain cell proliferation and to boost the expression of relevant genes and induce higher levels of enzymatic activities related to bone matrix deposition. Herein, we describe the development of a 3D model of bone tissue based on the conductive polymer PEDOT:PSS and human adipose derived stem cells. 3D electroactive porous scaffolds have been produced using the ice-templating technique, and different compositions (different ratios of conductive polymer to Collagen Type 1) have been explored. The developed scaffolds as well as cells interaction and response have been characterized. Overall, the results obtained so far highlight the usefulness of the porous conductive scaffolds as an in vitro platform for the development of 3D models for bone tissue engineering

Tissue engineering by self-assembly offers the possibility to fabricate contiguous cell sheets that are stabilised by intact cell-cell contacts and endogenously produced extracellular matrix (ECM) However, these systems lack the possibility to introduce topographical cues, that are fundamental for the organisation of many types of tissues. Herein we venture to fabricate aligned electrospun thermoresponsive nanofibres to sustain growth and detachment of ECM-rich living substitutes in the presence of a MMC microenvironment. A copolymer of 85% poly-N-isopropylacrylamide and 15% N-tert-butylacrylamide (pNIPAAm/NTBA) were used. To create aligned nanofibers, the polymer was electrospun and collected on a mandrel rotating at 2000 rpm. Human adipose derived stem cells (hADSC) were treated with media containing macromolecular crowders to enhance matrix deposition. Cell viability and morphology were assessed, and immunocytochemistry was conducted to estimate matrix deposition and composition. Non-invasive cell detachment was enabled by decreasing the temperature of culture to 10 °C for 20 minutes. The electrospinning process resulted in the production of pNIPAm/NTBA fibres in the diameter range from 1 to 2 µm and an overall alignment of 80%. Cell viability revealed that hADSCs were able to grow on the scaffold. The cells aligned on the fibres after 3 days and they were able to detach as intact cell sheets in presence of MMC. Moreover, it was demonstrated that MMC, by a volume extrusion effect, enhances collagen type I deposition, one of the main components of the ECM. Collectively the pNIPAm/NTBA fibres were able to successfully sustain growth and detachment of ECM-rich cell sheets

Among the innovative therapeutic techniques in orthopedics, a considerable interest arose around Mesenchymal Stem Cells (MSCs) - based therapies for one-step clinical applications. In order to achieve a better cell targeting at the injury site, these applications would need a specific cell delivery system. Hence, in this study a protocol for an efficient cell delivery based on the rapid cell adhesion on the surface of lyophilized fibroin-coated alginate microcarriers (L-FAMs) was optimized by the Design of Experiment (DoE) method in accordance with the minimum requirements for one-step clinical application. Specific parameters (seeding time, intermittent or not dynamic culture, stirring speed and volume of cell suspension) were combined in 13 different protocols, tested on human Adipose derived stem cells - ASCs (n=3). Cell adhesion rate in term of DNA quantification and metabolic activity of cells adhered on L-FAMs, and their qualitative observations by Calcein Staining were evaluated. The data showed that a suspension of 3.75 × 10. 5. cells/ml and 10 mg/ml of FAMs, 12.3 rpm of stirring speed and 85.6 minutes of seeding time are the most performing combination of parameters. The final protocol was then tested and validated on both hASCs (n=3) and human bone marrow derived stem cells - BMSCs (n=3). The results confirmed a high adhesion rate of cells, homogenously arranged on the surface of L-FAMs without cell cluster formation. Even though further optimizations are still needed, the present protocol may represent the proof of concept for the introduction of L-FAMs as carriers in one-step intraoperative applications