Purpose of study. The vast majority of C2 ring fractures can be managed non-operatively but occasionally the situation precludes this and surgery is considered. Thus study reviews our indications and surgical options in this scenario. Methods. A retrospective review of patient folders and x-rays was performed of all patients with C2 traumatic spondylolisthesis that were managed surgically between 2003 and 2012. Demographic data, particularly indications for surgery, the options chosen and the clinical and radiological outcomes were analysed. Results. Six patients required surgery for a Traumatic Spondylolisthesis of the Axis during this period. Of these 6 cases, 2 were performed for failure of conservative treatment and the other 4 for associated injuries or condition (pregnancy). A variety of surgical methods were utilised including pars repair, C2-C2 posterior fusion and combined anterior C2/3 plating with posterior C1-3 fixation. Osseous healing was achieved in all patients in less than 6 months. There was one case that presented at 3 months post op with an adjacent level subluxation that required application of cones callipers until bony union. There were no infective complications, and no deterioration of neurological findings. Conclusion. Although the majority of Traumatic Spondylolisthesis of the Axis can be managed non-operatively, there are occasional non-spinal reasons to consider surgical stabilisation. There are many options but we would recommend a C2/3 fusion rather than pars repair due to the C2/3 disc trauma and inevitable ankylosis. This can be effectively performed from a posterior approach. NO DISCLOSURES

Background. Current literature of definition, classification and outcomes of fractures of talar body remains controversial. Our primary purpose is to present an unusual combination of fractures of talar body with pantalar involvement / dislocation / extension as a basis for modification of Müller AO / OTA Classification. Methods. We include four consecutive patients, who sustained talar body fractures with pantalar subluxation/dislocation /extension. These unusual injury patterns lead us to reconsider Müller AO / OTA Classification in the light of another widely used talar fracture classification, Hawkins Classification of fractures of neck of talus and subsequent modification by Canale and Kelly. Results. Müller AO / OTA Classification comprises CI – Ankle joint involvement, C2 – Subtalar joint involvement, C3 – Ankle and subtalar joint involvement. We propose Modification of Müller AO / OTA. Classification. C1 – Absolutely undisplaced fracture; C2 – Ankle and Subtalar joint involvement: subluxation; C3 – Ankle and subtalar joint involvement: subluxation with comminution; C4 – Ankle, subtalar and talonavicular joint involvement. Conclusions. Our modification redefines Müller AO / OTA Classification, extends and fills the void in the classification by inclusion of C4, draws attention to stability of talonavicular joint and reflects increasing severity of injury in fractures of talar body

Aim:. To assess the long term MRI pathoanatomical changes of unrepaired, isolated full thickness supraspinatus tears in a population of patients that had acromioplasty done for symptomatic impingement syndrome. Background:. To date there are no studies assessing the effect of acromioplasty on rotator cuff tear progression in impingement syndrome. The natural evolution of unrepaired tears suggests that small isolated tears may heal, and not all tears progress onto significant fatty change and atrophy. Which tears heal and which tears progress and the effect of acromioplasty on tear progression is still not known. Results:. There were 17 shoulders examined. Average age of our patients was 65 years at time of surgery and 73 years at follow up. The patients were divided into three groups depending on the size of the tear at the time of surgery: C1 tears (< 1cm) n = 5, C2 tears (1–2 cm) n = 8, C3 tears (2–3 cm) n = 4. The C1 tear group did the best clinically with a Constant score mean 86, 4(range 83–96) and mean Oxford score of 47 (range 46–48). The MRI findings in this group showed only one patient (20%) with significant fatty infiltration and atrophy. The C2 group had mean Constant scores of 72(range 65–98), mean Oxford score 45(range 42–48). On MRI evaluation there were 2 patients (11.8%) that had tears that had regressed in size (CI 1.4‐36.4). In the C3 group the mean Constant score was 75(range 65–85) and Oxford score 45(range 42–48). MRI evaluation revealed that all (100%) the rotator cuff tears went on to significant degeneration and atrophy in this group. No statistical difference was found between these groups when assessing Oxford score (p=0.75) and Constant scores(p=0.69). Significant associations were found between tear size and fatty infiltration (p=0.028), and tear size and atrophy (p=0.054. Conclusion:. Acromioplasty in the management of impingement syndrome may be protective when small isolated tears are noted during surgery as two tears regressed in size. Large tears all progress onto fatty infiltration and atrophy, but all three groups despite tear size had good clinical and functional outcomes. More research is needed to further understand the evolution of tears in impingement syndrome

Background. The distal part of the radius is the most common localisation of fractures of the human body. Dislocated intraarticular fractures of the distal radius (FDR) are frequently treated by open reduction and internal fixation with a volar locking plate (VLP) under fluoroscopic guidance. Typically the locking screws are placed subchondral near the joint line to achieve maximum stability of the osteosynthesis. To avoid intraarticular screw placement an intraoperative virtual implant planning system (VIPS) as an application for mobile C-arms was established. The aim of the study was the validation of the implemented VIPS comparing the intraoperative planning with the actual placement of the screws. The study was conducted as a single-centre randomised controlled trial in a primary care institution. The hypothesis of the study was that there is conformity between the virtual implant position and the real implant placement. Patients/Material and Methods. 30 patients with FDR type A3, C1 and C2 according to the AO-classification were randomised in two treatment groups and allocated either in the conventional or in the VIPS group in which the patients underwent an intraoperative planning before screw placement. The randomisation was performed on the basis of a computer-generated code. After fracture reduction an initial diaphyseal fixation of the plate was done. Then the matching of the three-dimensional virtual plate with the image of the real plate in the fluoroscopy shots in two planes was performed automatically. The implant placement was planned intraoperatively in terms of orientation, angulation and length of the screws. After the placement of four or five locking screws the implant position was verified with an intraoperative three-dimensional mobile C-arm scan. The locking screws near the joint line were examined and compared in relation to the actual and the planned inclination angle, the azimuth angle which is determined analogue to a compass rose and the screw-tip distance. The planned and actual parameters of the locking screws were then statistically analysed applying the Shapiro-Wilk - and the Students t-test. Results. 15 patients with FDR were treated in the VIPS arm. In the VIPS group six fractures type A3 one type C1 and eight type C2 were included. The control group showed a similar fracture distribution with six type A3 and nine type C2 fractures. The discrepancy between the actual and the planned screw-tip distance was 2,24 ± 0,97 mm and did not differ significantly (p>0,05). The angle of the planned and actual screw placement also did not vary significantly (p>0,05). The difference of the actual to the planned azimut angle accounted for 18,69°± 29,84. The planned and real inclination of the screws differed by 1,66° ± 4,46. Conclusion. The analysis shows that the screws were almost placed as planned. Differences between actual and planned placement of the screws were observed but were not statistically significant. Therefore the hypothesis of the study can be accepted. We assume, that the precise planning of the screw placement in FDR with VIPS can be transported into the surgical treatment

Purpopse. Few Cervical Total Disc Replacement (TDR) devices are engineered to address both the Center of Balance (COB) and the Center of Rotation (COR) of the cervical motion segments. The COB is the axis in the intervertebral disc through which the axial compressive load is transmitted. TDRs placed posterior of this point tend to fall into kyphosis while devices placed anterior of this point tend to fall into lordosis. Thus from a “balancing” point of view the ideal placement would be at the COB. However, the COR position has been shown to be posterior and inferior to the disc space. It has also been shown that constrained devices tend to lose motion when there is a mismatch between device and anatomic centers. Mobile core devices may be placed at the COB since their unconstrained rotations and translations allow for the device COR to follow the anatomic COR, but they rely heavily on the facet joints and other anatomic features to resist the paradoxiacal motion. The TriLobe cervical TDR (Figure 2) was engineered for both the COB and COR. The purpose of this study was to compare the 3D kinematic and biomechanical performance of the TriLobe to a ball and trough(BT) cervical TDR in an augmented pure moment cadaveric study to find the ideal AP implant placement. Materials and methods. Specimen were CT imaged for three-dimensional reconstruction. Visual, CT, and DEXA screening was utilized to verify that specimens are free from any defects. Specimens were prepared by resecting all nonligamentous soft tissue leaving the facet joint capsules and spinal ligaments intact. C2 and T1 were potted to facilitate mounting in the testing apparatus (7-axis Spine Tester, Univ. of Utah, Salt Lake City, UT). OptoTRAK motion tracking flags were attached to each vertebra including C2/C3 and T1 to track the 3D motion of each vertebra. •. Specimens C2–T1. •. Treatment Level C5–C6. •. Insertion of fixture pins under fluoro. •. Load Control Testing to 2.5Nm in FE, LB, AR at 0.5Hz. •. 15 Pre-cycles in load control in FE / LB / AR (2.5Nm). •. Test implants in load control in FE / LB / AR to 2.5Nm for 4 cycles with data recorded for all cycles. Results. [Results Table - Figure 1]. Discussion. This study showed that the TriLobe had better control of motion compared to the ball and trough both in ROM and varibility for FE, LB, and AR. The TriLobe had better control of limiting kyphosis over the ball and trough by 41% of the flexion motion. The neutral zone slope, an measure for device stability, showed that the TriLobe was 51% more stable than the BT. AP placement of devices showed there was a general trend of decreasing stability from anterior to posterior placement; however, statistical significance was not established

Aim. Posttraumatic pelvic-osteomyelitis is one of the most serious complications after pelvic-fractures. The necessary extensive surgical debridement as part of interdisciplinary treatment is complicated by the possible persistence of pelvic instability. The aim of this study was to determine the outcome and outline the course of treatment after early posttraumatic pelvic bone infections due to type-C pelvic ring injuries. Method. In a retrospective cohort study (2005–2015) all patients with pelvic-osteomyelitis within six weeks of surgical stabilization of a type-C pelvic-fracture were assessed. Microbiological results, risk factors, course of treatment and functional long-term outcome using the Orlando-Pelvic-Score were analyzed. Results. A total of 18 patients (age 43.7 years; Body-Mass-Index 27.9 kg/m2; ASA-physical-status 1.8; Injury-Severity-Score 38) developed a pelvic-osteomyelitis within an average of 27 days after internal surgical stabilization of a type-C pelvic injury (AO-type C1: 10, C2: 4, C3: 4). Os pubis was affected in 7 and Os ilium in 11 cases. In addition to the pelvic-fracture, major vascular injuries occurred in 8, nerve injuries in 9, and intestinal and/or bladder ruptures in 11 cases. In 14 cases a mass transfusion was necessary. In addition to clinical signs of inflammation, (10 × redness, 12 × wound secretion, 6 × fistula) elevated levels of c-reactive-protein (7.7 mg/dl) and white-blood-cells (10.5/nl) were found. Bacterial cultures harvested during the initial surgical revision demonstrated mixed cultures in 17/18 cases, with an average of 3 different organisms isolated per case (61% intestinal bacteria). During the scheduled repetitive debridement a reduction of the initial mixed cultures into a single organism was observed. Overall 6.8 surgical interventions, including implant removal, were necessary until osteomyelitis was eradicated. In no cases was re-osteosynthesis performed. In 6/18 cases recurrence of infection occurred after an average of 5 months, followed by an additional repetitive debridement. An average 3-year-follow-up after the initial osteomyelitis-diagnosis demonstrated eradication of infection in 17/18 cases combined with an Orlando-Pelvic-Score of 21.9 points (best possible function: 40 points). Despite significant pelvic malalignment the ability to walk was achieved in all patients, with one exception due to a spinal cord injury. Conclusions. Despite no new surgical stabilization of the initial unstable pelvic injury, the early removal of implants combined with extensive debridement and antibiotic therapy led to sufficient long-term outcomes in patients with early posttraumatic pelvic-osteomyelitis. In particular, due to the severity of the initial injury and the complex interdisciplinary approach, early diagnosis of the osteomyelitis is essential

Purpose. In an effort to increase the durability of cemented total hip arthroplasties (THA), femoral stems were precoated using polymethlymethacrylate (PMMA). One such design is Harris precoat plus and centralign design (Zimmer, Warsaw, Indiana). The reports on these particular designs are variable, ranging from good survival to early failures, studied over short to medium term. Early failures have been attributed, most of the time to debonding at cement-bone interface. In view of lack of long term and variable results, we reviewed the results of primary hybrid THA performed during October 1990 to December 1995, using a PMMA coated, cemented femoral prosthesis and contemporary cementing techniques. Materials and Methods. 121 patients (136 hips) underwent primary THA using one of the precoated femoral stems during the study period. Thirty-five patients (36 hips) died and 23 patients (23 hips) were lost to follow-up due to some reasons. Two hips (2 patients) were revised for postoperative infection and hence, not included in study. Collectively, 75 hips (61 patients) were available for clinical and radiological reviews until the last follow-up, with an average follow-up period of 15.5 years (range, 14 to 18.3 years). The average age of the patients at the time of the index surgery was 53.6 years (range, 24 to 82 years). There were 43 males (55 hips) and 18 females (20 hips). Acetabular components used in these 75 hips were Harris Galante porous (HGP) cups in 69 hips and CLS Expansion cup (Protek, AG, Bern) in six hips. The mean age of 61 patients (75 hips) who were available for latest follow-up at December 2009, was 46 years (range, 22-65 years). Third generation cementing techniques and distal cement plug but no centralizer was used in all cases. All surgeries were performed by same surgeon at a single institute. Results. 23 femoral stems were revised, 20 for aseptic loosening (8 Precoat plus and 12 Centralign) and 3 for periprosthetic fracture with loosening (1 Precoat plus and 2 Centralign). The cementing of the femoral stem was grade A in 29 hips (39%), grade B in 16 (21%), C1 in 6 (8%) and grade C2 in 24 (32%). 21 of 24 hips which showed definitive loosening in radiogram had had cement grade C2 cementing. There were 22 acetabular revisions. 11 hips underwent isolated liner exchange for severe wear and osteolysis and in remaining 11 hips, complete acetabular component revision was performed. Indications for acetabular component revisions were aseptic loosening in five, severe lysis in four, extensive wear and metallosis in one, and liner dissociation in one. In one hip, with a fractured acetabular component due to severe pelvic bone defect, both the components were revised. Conclusion. Our results suggest that an early failure of the precoated femoral stem was mainly precipitated due to insufficient cementing technique (a thin cement mantle). Inherent flaws of the stem design may also accelerate the mechanism of failure

Pedicle screw (PS) insertion has been critised for its risk of serious injury to neurovascular structures. Although computed tomography (CT)-based navigation has been developed to avoid such complications, perforation remains an issue, even with the aid of additional guidance. We clarify screw perforation rate and direction in 359 consecutive patients treated using CT-based PS insertion and present important considerations for more accurate screw placement. The medical records of 359 consecutive patients who underwent PS insertion involving C2-L5 using a CT-based navigation system were reviewed. Postoperative CT images were analysed to evaluate the accuracy of screw placement. We investigated both rate and direction of screw perforation according to vertebral level. Of the 3413 PS that were inserted, 3.0% (104/3413) were judged as Grade 3 (more than 4mm) perforations. Allover perforation rates by vertebral level were shown in Table 1. The rate of these perforations was 5.0% for C2, 7.8% for C3–5, 3.9% for C6–7, 3.4% for T1–4, 3.5% for T5–8, 1.4% for T9–12, and 1.7% for L1–5. We also analysed the odds ratio (OR) for screw perforation in vertebrae accounting for the effects of age and disease. Multivariate analysis identified that PS insertions at C3–5 (OR 4.9, 95% CI 2.2–10.9; p<0.001) were significantly associated with Grade 3 screw perforation as compared with that of L1–5. Even with CT-based navigation, careful insertion of PS is needed in the middle cervical spine because of a significantly higher perforation rate as compared with the lumbar region. For figures and tables, please contact authors directly

Aims

This study aimed to investigate the risk of postoperative complications in COVID-19-positive patients undergoing common orthopaedic procedures.

The aim of this study was to assess the incidence, management and survival of unstable pelvic ring injuries in patient aged 65 years or older. Prospectively kept data was analysed from April 2008 to October 2016. Information regarding the mechanism, fracture type, associated injuries, treatment and complications of the treatment were collected. Annual incidence was calculated and a Kaplan Meier survival analysis for carried out at 30 days, 1 year and 5 years. 404 patient records were available. 125 were 65 years or older (60 males and 65 females). 24 (19%) patients required surgical stabilisation to permit mobilisation the remaining 101 patients, treated conservatively were mobilised with immediate weight-bearing under the supervision of a physical therapist with assistive devices. Mean age was 73.5 years (SD 9.9 yrs). Fracture types were − 61.B2 47(37.6%), 61.B1 24(32%), 61.A2 17(13.6%), 61.C1 16(12.8%), 61.C2 5(4%), 61.A1 2(1.6%) and 61.C3 3(2.4%). Mechanisms of injury included fall from standing height − 41 (32%), road traffic collisions − 46(36.8%), fall from higher than standing height − 10(8%), fall from horse − 6(4.8%), jumped from bridge − 3(2.4%) & others 19(15%). Complications in surgical group included 1 death from PE and 1 wound infection treated with vacuum assisted dressing. Survivorship was 91.7%(30 days), 82.5%(1 year) and 49.7%(5 years). Most common fracture type is 61.B2. Over one third of fractures resulted from low energy mechanism. The majority 81% could be managed conservatively. One-year survival figure closely resembles the fracture neck of femur group, highlighting the frailty of this population

Introduction. Metal on metal hip resurfacing (MoM HR) is attractive for young active patients. Patients with osteonecrosis of the femoral head (ONFH) are relatively young. HR can be an option of treatment, however, long-term stability of the femoral component is a concern because of the necrotic lesion in the femoral head. There is also a concern of ARMD for MoM implants. The purpose of this study is review a 10 year outcome of a consecutive patients with ONFH who underwent MoM HR. Methods. The subjects of this study were 30 hips of 26 patients with ONFH who underwent HR between 1998 and 2004. There were 21 hips of 18 males and 9 hips of 8 females. The average age at operation was 40 years (range, 20–63 years). 19 ONFHs were induced by steroid and 11 ONFHs were alcohol related. According to the Japanese Investigation Committee classification, there were 8 hips with Type C1 and 22 hips with Type C2. There were 16 hips in stage 3A, 7 hips in Stage 3B, and 7 hips in Stage 4. Operation was performed through a posterior approach. A fragile necrotic bone was curettage thoroughly and the defect was filled with cement. Results. The average Harris hip score improved from 61 preoperatively to 97 at the final follow-up. The average radiographic inclination of the cup was 43 degrees (34–54 degrees) and the average anteversion was 12 degrees (4– 22 degrees). There was no dislocation. One hip had a late hematogenous infection at 9 years after surgery. Two hips of two patients with alcoholic ONFH had a mechanical loosening of the femoral component at 10 year and 13 years after surgery. The survivorship with revision for aseptic loosening as the endpoint was 96% at 10 years. There was no ARMD by ultrasound echo screening. There was no stress shielding of the femur at the final radiographic examination. Conclusion. Our over 10 year results of MoM HR for ONFH showed a high Harris hip score without dislocation. Although this series included the initial learning curve of the HR procedure, the survivorship with revision for aseptic loosening as the endpoint at 10 years was high. There was no ARMD by ultrasound echogram. MoM HR is a good option of treatment for ONFH

Introduction. Distal femur fracture is a critical issue in orthopedic trauma, because it is difficult to manage especially in cases with intra-articular fracture. Osteoporosis may cause instability of implant and increase complications. Few studies investigate on the stability of distal femur osteoporotic fracture and the behaviors under cycling. Our hypothesis was that the stiffness of construct would decrease as cycling in osteoporotic bone. Materials and Methods. Seven cadaver specimens were used in this study. Relative bone density for each specimen was evaluated using CT scanning by three known calibration phantoms scanned simultaneously with the specimen. All cadaver specimens were divided normal (group 1) and osteoporosis (group 2) in accordance with the bone density. The titanium distal femur locking plates with 6 screws placed in distal femur condyle and 4 in shaft. A 10 mm gap with 65 mm proximal to the center of articular surface and a vertical fractural line between intra-articular were created to simulate AO C2 type fracture. Each specimen was cyclically loaded in two-phase at a frequency of 2 Hz. Phase 1 was set at 1000 N for 10000 cycles. In phase 2, the load was set at 2000 N for 10000 cycles. Then, the specimen was loaded up to failure at a rate of 5 mm/min. Stiffness was evaluated from the linear portion of load-displacement curve at 2000 cycle interval. Results and Discussion. Figure 1 showed the stiffness deterioration during cycling. Group 1 expresses the cadaveric specimen with normal bone density, and group 2 expresses osteoporosis. The stiffness of group 1 (with normal bone density) decreased for 26.2 % after 20000 cycles, however, group 2 (osteoporotic bone) revealed 90.3 % decay in stiffness. The stiffness decay observably when the load increased from 0 to 1000 N and from 1000 to 2000 N. The maximum load for group1 and group 2 were 4883±134 N and 2538 N, respectively. It can be found the normal bone density group showed intact circular hole, however, the osteoporotic bone revealed an oval contour. The subsidence of screws increased the risk of screw loosening and instability. It can be concluded that the bone quality and cyclic loading could be the important factors that affect the stability and failure strength of the construct

Background. Implants based on the polyetheretherketon (PEEK) polymer have been developed in the last decade as an alternative to conventional metallic devices. PEEK devices may provide several advantages over the use of conventional orthopedic materials, including the lack of metal allergies, radiolucency, low artifacts on magnetic resonance imaging scans and the possibility of tailoring mechanical properties. The purpose of this study was to evaluate the clinical results at mean 24-month follow-up using a new plate made of carbon-fiber-reinforced polyetheretherketon (CFR-PEEK) for the treatment of distal radius fractures. Materials and methods. We performed a prospective study including all patients who were treated for unstable distal radius fracture with a CFR-PEEK volar fixed angle plate. We included 70 consecutive fractures of AO types B and C that remained displaced after an initial attempt at reduction. The fractures were classified according to the AO classification: 35 fractures were type C1, 13 were type C2, 6 were type C3, 5 were type B1 and 11 were type B2. Results. All fractures healed, and radiographic union was observed at an average of 6 weeks. The final Disabilities of Arm, Shoulder and Hand score was 5.2 points. The average grip strength, expressed as a percentage of the contralateral limb, was 94 %. Three cases of hardware breakage were reported. Two cases were due to intraoperative plate rupture caused by the attempt to achieve the reduction of the fracture in 1 case and while inserting a distal screw in the other case. In the last case hardware breakage was caused by a fall on the injuried arm 1 week after surgery. No cases of loss of the surgically achieved fracture reduction were documented. Hardware removal was performed in 3 cases, for the occurrence of extensor tenosynovitis in 2 patients and tenosynovitis of flexor pollicis longus in 1 case. Conclusion. The major advantage of CFR-PEEK plate is its radiolucency. This characteristic allows direct visualization of osseous callus formation, allowing monitoring of the healing of the fracture, thereby improving clinical assessment and accuracy. Therefore, specific indications for this new radiolucent plate can be represented by fractures with significant metaphyseal comminution and in cases of nascent malunion where a distal radius osteotomy with bone grafting is usually performed to correct the wrong angle. At early follow-up this device showed good clinical results and allowed maintenance of reduction in complex, AO fractures. The occurrence of tendon complications related to this implant was similar to that reported in literature for the other new-generation plates. However, attention should be payed when stressing the plate to achieve the desired fracture reduction to avoid hardware failure

Purpose of the study:. Is circular external fixation a safe and effective method of managing closed distal third tibia fractures. These fractures are conventionally treated with plaster casts, intramedullary nails or plate fixation. These treatment modalities have complication rates in the literature of up to 16% malunion, 12% non-union, and 17% deep infections. Description and Methods:. Retrospective review of 18 patients with closed distal third tibia fractures, with or without extension into the ankle joint, treated with circular fixator systems and minimal percutaneous internal fixation of the intra-articular fragment if required. Patients were followed up for time to union, malunion incidence as well as incidence of pin tract and deep infection. Distal third fractures which were extra articular or with simple intra articular extension were included. (AO 43 A, B1, C1, C2 + AO 42 in distal third) Patients with pilon fractures (AO 43 B2, B3 and C3) were excluded. Summary of results:. The average time to union in these patients was 16 weeks (11–33 weeks). The non-union rate was 11.1% in comparison to 12% with conventional treatment. The malunion rate was 0% compared to 16% with conventional treatment. The incidence of pin tract infection was 16.6%, but no deep infections were noted, whilst conventional treatment shows deep infection in up to 17%. Conclusion:. Circular external fixation is a safe and efficient option in the treatment of distal tibia fractures. The incidence of complications is significantly reduced in comparison to conventional treatment

Introduction. Dual-mobility (DM) liners have increased popularity due to the range of motion and stability provided by these implants. However, larger head diameters have been associated with anterior hip pain, due to surrounding soft-tissue impingement, particularly the iliopsoas. To address this, an anatomically contoured dual mobility (ACDM) liner was designed by reducing the volume of the liner below the equator (Fig1). Previous cadaver studies have shown that the ACDM significantly reduces iliopsoas tenting and trapping of the liner compared to conventional designs. We created a finite element study based on previous cadaver testing to further analyze the effectiveness of the ACDM design in reducing soft-tissue impingement, specifically the tendon-liner contact pressure and the tendon stress. Methods. The finite element model was developed within COMSOL 4.3b. The psoas tendon was modelled as a Yeoh hyper-elastic Material, which uses 3 constants (c1-c3), density (1.73g/cm3) and a bulk modulus (26GPa)[Hirokawa,2000]. In a previous, separate study, the average stiffness of 10 psoas tendon samples (5 cadavers), were measured to be 339[N/mm] in the linear region with average width and thickness of 14mmX4mm. The 3 constants were tuned to match experimental uniaxial test data, and were 5[GPa], 0[Gpa], and 46[GPa] for c1, c2, and c3 respectively. The implant components were rigidly modeled relative to the psoas. Cadaver specific CT models were used to create the FEA geometry. The insertion points for the Psoas were digitally determined on the proximal end of the lesser trochanter, and the psoas notch on the pelvis for hip flexion angles of −15°, 0°, 15° and 30°. These insertion points determined the length of the psoas and its relative position to the femoral head in 3D. The specific liner size and position for each cadaver was determined by implant planning with the CT models. In this abstract, we only present data for 2 specimens (left/right hips) with 44mm conventional DM, and 44mm ACDM, matching specimen anatomy. A 500N tensile load was applied to the psoas tendon proximally to simulate moderate physiological loading, the average/max stresses and contact pressures between the psoas and the two liner designs were determined. Results. At all flexion angles from −15° to 30°, the ACDM had lower psoas-liner contact pressure and stress compared to the conventional liner. Both contact pressure and tendon stress decreased for both liners with increasing hip flexion. At −15° flexion angle, there was an average contact pressure difference of .51MPa between the conventional and ACDM designs, or 37% decrease in pressure when using the ACDM. The average difference in tendon stress was 67.9MPa, or a 59% decrease in stress when using the ACDM (fig2, fig3). Conclusion. This study utilized cadaver specific FEA models to evaluate interaction between the iliopsoas tendon and conventional and ACDM liners. Although this abstract presented FEA models for only four hips (two specimens), the results show a notable reduction in contact pressure and tendon stress with ACDM designs. This validates findings from previous cadaver studies, suggesting that anatomically contoured designs could reduce anterior hip pain and soft tissue impingement

Aims

This study presents patient-reported quality of life (QoL) over the first year following surgical debridement of long bone osteomyelitis. It assesses the bone involvement, antimicrobial options, coverage of soft tissues, and host status (BACH) classification as a prognostic tool and its ability to stratify cases into ‘uncomplicated’ or ‘complex’.

We analysed the morbidity, mortality and outcome of cervical spine injuries in patients over the age of 65 years in a retrospective review of 107 elderly patients admitted to our tertiary referral spinal injuries unit with cervical spine injuries between 1994 and 2002. The data were acquired by analysis of the national spinal unit database, hospital inpatient enquiry (HIPE) system, chart and radiographic review. Mean age was 74 years (range 66-93yrs). The male to female ratio was 2.1: 1(M=72, F=35). The mean follow-up was 4.4 years (1-9 years) and mean in-hospital stay was 10 days. The mechanism of injury was a fall in 75 and a road traffic accident (RTA) in the remaining 32 patients. The overall complication rate was 18.6% with an associated in-hospital mortality of 11.2%. Outcome was assessed using the Cervical Spine Outcomes Questionnaire (CSOQ) from Johns Hopkins School of Medicine. Functional outcome scores approached pre-morbid level in almost all patients. Functional disability was more marked in the patients with neurological deficit at the time of injury. Outcome of the injury is related to the increasing age, co-morbidity and the severity of the neurological deficit. Injuries of the cervical spine are a not infrequent occurrence in the elderly and occur with relatively minor trauma. Neck pain in the elderly patient should be thoroughly evaluated to exclude C2 injuries. Most patients can be managed in an orthosis but unstable injuries require rigid external immobilisation

Introduction:. Trauma is endemic in South Africa. The upper thoracic spine is extremely difficult to image and assess clearly with frontline x-rays resulting in up to 22% of proximal fractures being missed. Aim:. To review a series of patients with proximal thoracic fractures. Methods:. Thirty-three patients with proximal thoracic fractures in the T1–T4 area managed in a spinal unit were identified. A retrospective review of medical records and radiology was undertaken. Demographic data, mechanism of injury, diagnostic modalities, level and type of fracture, neurological status, associated injuries, hospital stay, management, complications and outcome was recorded. Results:. There were 21 males and 12 females, with a median age of 31.8 years. Aetiology was 21 MVA passengers, 8 drivers, 1 pedestrian, 1 assault, 1 bicycle and 1 hanglider accident. Delay in diagnosis was 1 day in 8, 2–5 days in 2 and greater than 2 weeks in 5. The fractures were A1 in 7, A3 in 14, B1 in 7, C1 in 2 and C2 in 2. Twenty three patients had neurological compromise, 13 being complete. Twenty-three had associated chest and head injuries. Hospital stay was a mean of 27 days (maximum 246) and ICU stay median 14 (maximum 115) days. Twenty-six patients underwent surgery, posterior instrumented fusion being the commonest procedure. Although the surgery did not change the median kyphosis (25° preop to 20°at 1 year and 21°at 2 years), the most kyphotic patients were improved (55°to 45°). Conclusion:. A high index of suspicion for proximal thoracic fractures needs to be maintained in high energy injuries, especially MVA passengers, where there is chest injury. Prompt exclusion by appropriate special investigations is mandatory. Once recognized, they can be adequately managed with posterior instrumented fusion, although these patients are resource intensive due to the associated neurological impairment and chest injuries

Purpose of study. Transarticular screw fixation offers acceptably high fusion rates but is not possible in 18% of patients due to a high riding vertebral artery. It also requires pre-operative anatomical reduction which is not always possible. The Harms' technique utilises a posterior C1 lateral mass and C2 pedicle screw. This allows easier access due to the angle of drilling and has become an increasingly popular surgical technique. The aim of this study is to review and compare the above techniques with regard to surgery, complications and outcome. Description of methods. This study is a retrospective chart and radiographic review of patients undergoing posterior C1-2 fusion in a single institution in the period 2003 to 2011. The most common aetiology was rheumatoid arthritis and post-traumatic instability. All atlanto-axial instability patients that came to surgery are included in this study, and only cases with less than six months follow-up were excluded. We report on surgical indications, surgical outcomes, complications and radiographic outcomes. Summary of results. No statistically significant differences were found in blood loss (p=0.47) or surgical time (p=0.44) using the Mann-Whitney U test. Complications in patients undergoing transarticular screw fixation included the need to abandon transarticular screws in two cases due to technical difficulty, metalware failure in two cases and intra-operative cerebrospinal fluid leaks in 2 cases. The Harms technique was associated with a single case of cerebrospinal fluid leak. Conclusion. There is no significant difference in surgical time and blood loss between the two techniques. Both are reliable in terms of fusion. The Harms technique offers the advantage of intra-operative reduction and a smaller wound due to the direction of access. The decision to use one or the other is based on the surgeons skill levels, ability to pre-operative reduce the joint and possibly the cost. NO DISCLOSURES

The ITS volar radial plate (Implant Technology Systems, Graz/Austria) is a fixation device that allows for the distal locking screws to be fixed at variable angles (70°-110°). This occurs by the different material properties, with the screws (titanium alloy) cutting a thread through the plate holes (titanium). We present our experience with the ITS plate. We retrospectively studied 26 patients who underwent ITS plate fixation for unstable multifragmentary distal radial fractures (AO types A3, B2, B3, C2, C3). The surgery was performed either by a consultant orthopaedic hand surgeon or senior registrar. A volar approach was used every time and 10 cases required synthetic bone grafting. Post-operatively they were immobilised for an average of 2.5 weeks. The 26 patients had a mean age of 58 and the dominant side was affected in 46% of cases. 5 cases were open fractures and 10 cases followed failed manipulation under general anaesthesia. The average interval between injury and surgery was 7 days. Union was achieved in all cases. No implant infections, failure or tendon rupture/irritation occurred. There were two fractures which loss reduction, of which one required revision surgery. There was one case of CRPS. The six month average DASH score was 27.5. We consider the ITS plate a technically easy plate to use and a reliable implant at early follow-up. We value the versatility of its variable angle screw fixation ability for complex intra-articular distal radial fractures