Abstract. Background. Aim of this study is to determine the difference between re-operation rates after conventional Methods of fixation of patella fractures using Metallic implants and novel technique of all suture fixation using Ethibond or fiber tape. Methods. This is a retrospective
The rise of multidrug-resistant bacteria and the decreasing efficacy of antibiotic therapy in successfully treating biofilm-associated infections are prompting the exploration of alternative treatment options. This study investigates the efficacy of different bioactive glass (BAG) formulations - alone or combined with vancomycin - to eradicate biofilm. Further, we study the influence of BAG on pH and osmotic pressure as important factors limiting bacterial growth. Different BAG-S53P4 formulations were used for this study, including (a) BAG-powder (<45 μm), (b) BAG-granules (500–800 μm), (c) a cone-shaped BAG-scaffold and (d) two kinds of BAG-putty containing granules, with no powder (putty-A) or with additional powder (putty-B), and a synthetic binder. Inert glass beads were included as control. All formulations were tested in a concentration of 1750 g/ml in Müller-Hinton-Broth. Targeted bacteria included methicillin-resistant To investigate the antibiofilm effect of BAG alone or combined with vancomycin, 3 hour-old MRSA or MRSE biofilms were formed on porous glass beads and exposed to BAG ± vancomycin for 24h, 72h and 168h. After co-incubation, biofilm-beads were deep-washed in phosphate-buffered saline and placed in glass vials containing fresh medium. Recovering biofilm bacteria were detected by measuring growth-related heat production at 37°C for 24h by isothermal microcalorimetry. Changes in pH and osmotic pressure over time were assessed after co-incubation of each BAG formulation in Müller-Hinton-Broth for 0h, 24h, 72h and 168h.Aim
Method
Classifying trochlear dysplasia (TD) is useful to determine the treatment options for patients suffering from patellofemoral instability (PFI). There is no consensus on which classification system is more reliable and reproducible for this purpose to guide clinicians in order to treat PFI. There are also concerns about validity of the Dejour classification (DJC), which is the most widely used classification for TD, having only a fair reliability score. The Oswestry-Bristol classification (OBC) is a recently proposed system of classification of TD and the authors report a fair-to-good interobserver agreement and good-to-excellent intra-observer agreement in the assessment of TD. The aim of this study was to compare the reliability and reproducibility of these two classifications. 6 assessors (4 consultants and 2 registrars) independently evaluated 100 magnetic resonance axial images of the patella-femoral joint for TD and classified them according to OBC and DJC. These assessments were again repeated by all raters after 4 weeks. The inter and intra-observer reliability scores were calculated using Cohen's kappa and Cronbach's alpha. Both classifications showed good to excellent interobserver reliability with high alpha scores. The OBC classification showed a substantial intra-observer agreement (mean kappa 0.628)[p<0.005] whereas the DJC showed a moderate agreement (mean kappa 0.572) [p<0.005]. There was no significant difference in the kappa values when comparing the assessments by consultants to those by registrars, in either classification systems. This large study from a non-founding institute shows both classification systems to be reliable for classifying TD based on magnetic resonance axial images of the patella-femoral joint, with the simple to use OBC having a higher intra-observer reliability score compared to the DJC.
This scientific work is a non-interventional, experimental and prospective comparative study of two very high-viscosity PMMA bone cements: Fast-setting PMMA bone cements are used in the endoprothetics of the patella and knee (in Australia) and are also used to cement an artificial acetabulum (in the UK). Are there any differences regarding the characteristics of the two fast-setting PMMA bone cements? All cements were mixed as specified by the manufacturer and analysed on the following parameters: handling properties (mixing, waiting, working and hardening phase), powder/liquid-ratio, mechanical properties (ISO 5833:2002 and DIN 53435), fatigue strength (ISO 16402) and elution profile. All tests were done in an acclimatised laboratory with temperatures set at 23.5°C ± 0.5°C and a humidity of >40%. Of two batch numbers, 11 units of each bone cement were tested.BACKGROUND
MATERIALS AND METHODS
The aim of this study was to compare the results of Matti-Russe (MR) procedure and interpositional techniques (IT) in the management of scaphoid non-union. 50 scaphoid non-unions were included in this retrospective study. Demographics, initial management of fracture, location of non-union, time to surgery, procedure done and immobilisation time were recorded. Radiographs were analysed for union and deformity correction. Functional outcome was analysed using the Herbert's grading system. The mean age and time to surgery were 26.7 years and 15.9 months. Twenty-one patients had the MR procedure and twenty-nine patients had interpositional procedures with internal fixation. DISI was present in 17 patients. The mean postoperative change in the scapholunate angle with the MR procedure was 7.9° compared to 8.0° (p>0.05) for the IT procedures. Union rate was 76% for both procedures. The mean follow-up was 9.9 months. Functional results were Herbert 0 or 1 in 42 cases. The only significant prognostic variables were location of non-union and time to surgery. Similar deformity correction was achieved using both IT and MP procedures. MP procedure can be used in the management of scaphoid non-union even in the presence of deformity with good functional results.
Proper femoral component placement plays a key role in the success of a total knee replacement (TKR). Controversy exists on which technique should be used to ensure proper femoral component placement. This two-part study compares gap balancing (GB) and measured resection (MR) techniques used in TKR, investigating femoral component position and early clinical outcomes. Femoral component position was analyzed in 95 consecutive knees that underwent primary TKR. Both GB and MR cutting blocks from the same knee system were sequentially placed on the operative knee, marking the pin sits. A standardized photograph (Figure) was taken prior to making final femoral cuts. Relative rotation was determined based on measurements made from a commercially available software. Clinical comparison was made using 50 consecutive GB patients and 50 consecutive MR patients. Clinical outcome measures were Knee Society Scores (KSS), knee range of motion (ROM), functional ROM (FROM), tourniquet time, and patients having manipulations under anesthesia (MUA).Background
Methods
Robotics assisted surgery are tools that provide successful biomechanical reconstruction of the hip. We compare the accuracy of cup placement in the safe zones described by Lewinnek et al. and Callanan et al., leg length discrepancy (LLD) and global offset (GO) measurement in total hip arthroplasty (THA) using five diferent image guided techniques performed by six diferent surgeons. Between June 2008 and April 2014, 2330 THRs were performed by six different surgeons. Ninety-three (4.69%) patients underwent robotic-assisted THA anterior approach, 135 (6.8%) had robotic-assisted THA posterior approach, 942 (47.5%) patients underwent fluoroscopic guided THA anterior approach, 708 (35.7%) had THA without guidance using posterior approach, 43 (2.1%) patients underwent navigation-guided anterior approach and 59 (2.9%) patients underwent radiographic-guided posterior approach THAs (Figure 1).Background
Methods
A stem extension improves fixation stability of a tibial component. We need caution not to contact the tibial cortex with an offset adaptor. A symmetric tibial stem design often requires the component's re-positioning with negative effects. Therefore, the objective of this study was to validate clinical efficacy of a tibial baseplate with asymmetric stemmed position (TB-ASP) using aligning outlier rate. We hypothesized that TB-ASP design will be better aligned without unessential offset adaptor than a tibial baseplate with symmetric stemmed position (TB-SSP). TB-ASP was designed based on the anthropometric standard model (58 female cadavers, 54.7±11.4 years)(Figure 1.). To validate the stem position, 3D bone models of 20 OA patients (71.8±7.2 years) was reconstructed. All virtual surgery has done by one surgeon with consistent surgical procedure for the analysis criteria. An analysis of TB-ASP's aligning outlier was proceeded by following steps; 1) aligning tibial baseplate to the line from medial 1/3 tuberosity to the center of PCL, 2) selecting tibial baseplate's size for maximal bone coverage without problematic overhang, 3) trying to displace tibial baseplate and stem extension(120mm long) not to contact tibial cortex. A case invading tibial cortex was considered to be an outlier. The ratio using offset adaptor was compared to those of TB-SSP. Statistical analysis was performed using paired t-test.Introduction
Methods
Lewinnek et al described a safe zone of acetabular component placement in Total Hip Arthroplasty (THA) to reduce complications. Callanan Between June 2008 and April 2014, 2330 THRs were performed by six different surgeons. Post-operative radiographic images were retrospectively reviewed and measured using TraumaCad® software to determine cup placement, LLD, and GOD.Introduction
Methods
Electromyography (EMG) is the best known method in obtaining in vivo muscle activation signals during dynamic activities, and this study focuses on comparing the EMG signals of the quadriceps muscles for different TKA designs and normal knees during maximum weight bearing flexion. It is hypothesized that the activation levels will be higher for the TKA groups than the normal group. Twenty-five subjects were involved in the study with 11 having a normal knee, five a rotating platform (RP) posterior stabilized (PS) TKA, and nine subjects with a PFC TC3 revision TKA. EMG signals were obtained from the rectus femoris, vastus medialis, and vastus lateralis as the patients performed a deep knee bend from full extension to maximum flexion. The data was synchronized with the activity so that the EMG data could be set in flexion-space and compared across the groups. EMG signals were pre-processed by converting the raw signals into neural excitations and normalizing this data with the maximum voluntary contraction (MVC) performed by the subject. The signals were then processed to find the muscle activations which, normalized by MVC, range from 0 to 1.Introduction
Methods
The authors present an analysis of 30 cases of total hip prosthesis performed with minimally invasive surgical earlier compares with 30 cases of total hip prosthesis performed surgically with direct side. The intent is to demonstrate the immediate and clear advantages especially in the postoperative surgical minimally invasive front. The authors present a randomized study of thirty cases of patients undergoing surgery for osteoarthritis of the hip prosthesis with primary surgical minimally invasive front compared to a group of 30 patients undergoing surgery with direct surgical side. All patients had the same cementless implants and instruments with the same surgeon. Patients were then evaluated in four different times: before surgery, immediate postoperative, after 1 week and 4 months after surgery.Backgrounds
Methods
Hip and knee joint replacement is nowadays one of the most common surgeries in Germany. The frequency of peri- and post-operative complications varies depending on the study. Since 2001, every hospital in Germany is required to report any peri- and post-operative complication to an external institute for quality control. The purpose of this study was to evaluate the published data of these institutes and to differentiate between the rate of peri- and early postoperative complications of conventional and computer navigated surgical procedures. The hypothesis of the study was that there is no increase in the rate of peri- and early post-operative complications as a result of the navigated surgical procedure. A retrospective analysis of the data on primary total knee and hip replacements between 2004 and 2012 were conducted. The share of navigated procedures, additional operating time due to navigation, the peri- and early post-operative surgical and general rates of complications and the comparison of patient population (age, sex and ASA-classification) were subject of the analysis.Introduction
Materials and Methods
Purpose. of this study is to analyze the results of a modular reconstructive tumor prosthesis for the lower limb (GMRS. (r). ) with a
Previous fluoroscopic studies compared total knee arthroplasty (TKA) kinematics to normal knees. It was our hypothesis that comparing TKA directly to its non-replaced controlateral knee may provide more realistic kinematics information. Using fluoroscopic analysis, we aimed to compare knee flexion angles, femoral roll-back, patellar tracking and internal and external rotation of the tibia. 15 patients (12 women and 3 men) with a mean age of 71.8 years (SD=7.4) operated by the same surgeon were included in this fluoroscopic study. For each patient at a minimum one year after mobile-bearing TKA, kinematics of the TKA was compared to the controlateral knee during three standardized activities: weight-bearing deep-knee bend, stair climbing and walking. A history of trauma, pain, instability or infection on the non-replaced knee was an exclusion criteria. A CT-scan of the non-replaced knee was performed for each patient to obtain a 3-D model of the knee. The Knee Osteoarthitis Outcome Score (KOOS) was also recorded.Introduction
Material and methods
Historically, amputation or rotationplasty were the treatment of choice in skeletally immature patients. The introduction of expandable endoprostheses in the late 1980s offered the advantages of limb-salvage and limb length equality at skeletal maturity and a promising alternative with improved cosmetic results and immediate weight bearing. to describe the Rizzoli experience in reconstruction with three different types of expandable prostheses in growing children with malignant bone tumors of the femur, assess the outcome of limb salvage in these patients, analyze survival and complications related to these prostheses used over time.Introduction
Objective
Current recommendations advocate for surgery within 48 hours from time of injury as a keystone in care for elderly patients with hip fractures. A spare population density within regional Australia provides physical challenges to meet time critical care parameters. This study aims to review the impact of delays to timely surgery for elderly hip fracture patients within a regional Australian population. A retrospective,
The routine use of intraoperative vancomycin powder to prevent postoperative wound infections has not been borne out in the literature in the pediatric spine population. The goal of this study is to determine the impact of vancomycin powder on postoperative wound infection rates and determine its potential impact on microbiology. A retrospective analysis of the Harms Study Group database of 1269 adolescent idiopathic scoliosis patients was performed. Patients that underwent a posterior fusion from 2004-2018 were analyzed. A
Aim. The most frequent mechanical failure in the osteosynthesis of intertrochanteric fractures is the cut-out. Fracture pattern, reduction quality, tip-apex distance or the position of the cervico-cephalic screw are some of the factors that have been associated with higher cut-out rates. To date, it has not been established whether underlying bacterial colonization or concomitant infection may be the cause of osteosynthesis failure in proximal femur fractures (PFF). The primary objective of this study is to assess the incidence of infection in patients with cut-out after PFF osteosynthesis. Method. Retrospective cohort study on patients with cut-out after PFF osteosynthesis with endomedullary nail, from January 2007 to December 2020. Demographic data of patients (such as sex, age, ASA), fracture characteristics (pattern, laterality, causal mechanism) and initial surgery parameters were collected (time from fall to intervention, duration of surgery, intraoperative complications). Radiographic parameters were also analyzed (tip-apex distance and Chang criteria). In all cut-out cases, 5 microbiological cultures and 1 anatomopathological sample were taken and the osteosynthesis material was sent for sonication. Fracture-related infection (FRI) was diagnosed based on Metsemakers et al (2018) and McNally et al (2020) diagnostic criteria. Results. Of the 67 cut-out cases, 16 (23.9%) presented clinical, analytical or microbiological criteria of infection. Of these sixteen patients, only in 3 of them the presence of an underlying infection was suspected preoperatively. A new osteosynthesis was performed in 24 cases (35.8%) and a conversion to arthroplasty in the remaining 43 (64.2%). A
Introduction. Anterior cruciate ligament (ACL) injuries represent a significant burden of disease to the orthopaedic surgeon and often necessitate surgical reconstruction in the presence of instability. The hamstring graft has traditionally been used to reconstruct the ACL but the quadriceps tendon (QT) graft has gained popularity due to its relatively low donor site morbidity. Methods. This is a single centre
Aim. Cutibacterium acnes (C. acnes) is the most cultured organism implicated in periprosthetic shoulder infections. Nevertheless, the clinical significance of its persistence on the skin surface and in the deep layers during shoulder arthroplasty surgery remains still unknown. The purpose of this study was to know if the C. acnes isolate present in deep tissues at the end of a primary shoulder arthroplasty could be responsible for shoulder arthroplasty infection. Method. Prospective study including 156 patients undergoing primary shoulder arthroplasty. In all the patients included 5 to 12 tissue samples were obtained and were specifically cultured to detect C. acnes presence. DNA was extracted from the C. acnes colonies selected with the QIAsymphony DSP Virus/Pathogen Midi Kit (Qiagen, Hilden, Germany). Libraries were prepared using Nextera XT kit (Illumina) and sequenced in an Illumina MiSeq sequencer. Sequencing files were pre-processed using The Microbial Genome Atlas pipeline. Samples that failed on QC analysis were discarded for further analysis. Isolate nucleotide distances were calculated using Genome-based distance matrix calculator from the enveomics collection.
