Intra-operative Tip-Apex Distance (TAD) estimation optimises dynamic hip screw (DHS) placement during hip fracture fixation, reducing risk of cut-out. Thread-width of a standard DHS screw measures approximately 12.5 millimetres. We assessed the effect of introducing screw thread-width as an intra-operative distance reference to surgeons. The null hypothesis was that there were no differences between hip fracture fixation before and after this intervention. Primary outcome measure was TAD. Secondary outcome measures included position of the screw in the femoral head, quality of reduction, cut-out and surgeon accuracy of estimating TAD. 150 intra-operative DHS radiographs were assessed before and after introducing screw thread-width distance reference to surgeons. Mean TAD reduced from 19.37mm in the control group to 16.49mm in the prospective group (p=<0.001). The number of DHS with a TAD > 25mm reduced from 14% to 6%. Screw position on lateral radiographs was significantly improved (p=0.004). There were no significant differences in screw position on antero-posterior radiographs, quality of reduction, or rate of cut-out. Significant improvement in accuracy (p=0.05) and precision (p=0.005) of TAD estimation was demonstrated. Awareness and use of screw-thread width improves estimation and positioning of a DHS screw in the femoral head during fixation of hip fractures

Introduction

Failure of intertrochanteric fracture fixation often occurs in patients, who have poor bone quality, severe osteoporosis, or unstable fracture patterns. Hip arthroplasty is a good replacement procedure even though it involves technical issues such as implant removal, bone loss, poor bone quality, trochanteric nonunion and difficulty of surgical exposure. The purpose of this study is to evaluate the outcomes of total hip arthroplasty (THA) as the replacement for failed fixation of intertrochanteric fractures of the femur.

Introduction

Internal fixation of pertrochanteric fractures is evolving as newer implants are being developed. Proximal Femoral Nail Antirotation (PFNA) is a recently introduced implant from AO/ASIF designed to compact the cancellous bone and may be particularly useful in unstable and osteoporotic hip fractures. This study is a single and independent centre experience of this implant used in management of acute hip fractures.

Slipped capital femoral epiphysis (SCFE) is traditionally treated with in situ fixation using a threaded screw, leading to physeal arrest while stabilizing the femoral head. Recently, there has been interest in alternative methods of fixation for SCFE, aiming to allow growth and remodelling of the femoral neck postoperatively. One such option is the Free Gliding SCFE Screw (Pega Medical), which employs a telescopic design intended to avoid physeal compression. The objective of this study is to evaluate radiographic changes of the proximal femur following in situ fixation using the Free Gliding SCFE Screw. This study retrospectively evaluated 28 hips in 14 consecutive patients who underwent in situ hip fixation using the Free Gliding SCFE Screw between 2014 and 2018. Initial postoperative radiographs were compared to last available follow-up imaging. Radiographic assessment included screw length, articulotrochanteric distance (ATD), posterior sloping angle (PSA), alpha angle, head-neck offset (HNO) and head-shaft angle (HSA). Of the 28 hips reviewed, 17 were treated for SCFE and an additional 11 treated prophylactically. Average age at surgery was 11.7 years, with an average follow-up of 1.44 years. Screw length increased by 2.3 mm (p < 0.001). ATD decreased from 25.4 to 22.2 mm (p < 0.001). Alpha angle decreased from 68.7 to 59.8 degrees (p = 0.004). There was a trend towards an increase in HNO (p = 0.07). There was no significant change in PSA or HAS. There were three complications (two patients with retained broken guide wires, and one patient requiring screw removal for hip pain). With use of the Free Gliding SCFE Screw, there was evidence of screw expansion and femoral neck remodelling with short-term follow-up. More research is required to determine the long-term impact of these changes on hip function, and to aid in patient selection for this technology

Initial stability of cementless components in bone is essential for longevity of Total Hip Replacements. Fixation is provided by press-fit: seating an implant in an under-reamed bone cavity with mallet strikes (impaction). Excessive impaction energy has been shown to increase the risk of periprosthetic fracture of bone. However, if implants are not adequately seated they may lack the stability required for bone ingrowth. Ideal fixation would maximise implant stability but would minimise peak strain in bone, reducing the risk of fracture. This in-vitro study examines the influence of impaction energy and number of seating strikes upon implant push-out force (indicating stability) and peak dynamic strain in bone substitute (indicating likelihood of fracture). The ratio of these factors is given as an indicator of successful impaction strategy. A custom drop tower with simulated hip compliance was used to seat acetabular cups in 30 Sawbone blocks with CNC milled acetabular cavities. 3 impaction energies were selected; low (0.7j), medium (4.5j) and high (14.4j), representing the wide range of values measured during surgery. Each Sawbone was instrumented with strain gauges, secured on the block surface close to the acetabular cavity (Figure 1). Strain gauge data was acquired at 50 khz with peak tensile strain recorded for each strike. An optical tracker was used to determine the polar gap between the cup and Sawbone cavity during seating. Initially 10 strikes were used to seat each cup. Tracking data were then used to determine at which strike the cups progressed less than 10% of the final polar gap. This value was taken as number of strikes to complete seating. Tests were repeated with fresh Sawbone, striking each cup the number of times required to seat. Following each seating peak push-out forces of the cups were recorded using a compression testing machine. 10, 5 and 2 strikes were required to seat the acetabular cups for the low, medium and high energies respectively. It was found that strain in the Sawbone peaked around the number of strikes to complete seating and subsequently decreased. This trend was particularly pronounced in the high energy group. An increase in Sawbone strain during seating was observed with increasing energy (270 ± 29 µε [SD], 519 ± 91 µε and 585 ± 183 µε at low, medium and high energies respectively). The highest push-out force was achieved at medium strike energy (261 ± 46N). The ratio between push-out and strain was highest for medium strike energy (0.50 ± 0.095 N/µε). Push-out force was similar after 5 and 10 strikes for the medium energy strike. However push-out recorded at ten strikes for the high energy group was significantly lower than for 2 strikes (<40 ± 19 N, p<0.05). These results indicate that a medium strike energy with an appropriate number of seating strikes maximizes initial implant stability for a given peak bone strain. It is also shown that impaction with an excessive strike energy may greatly reduce fixation strength while inducing a very high peak dynamic strain in the bone. Surgeons should take care to avoid an excessive number of impaction strikes at high energy. For any figures or tables, please contact the authors directly

Surgical training has been greatly affected by the challenges of reduced training opportunities, shortened working hours, and financial pressures. There is an increased need for the use of training system in developing psychomotor skills of the surgical trainee for fracture fixation. The training system was developed to simulate dynamic hip screw fixation. 12 orthopaedic senior house officers performed dynamic hip screw fixation before and after the training on training system. The results were assessed based on the scoring system that included the amount of time taken, accuracy of guide wire placement and the number of exposures requested to complete the procedure. The result shows a significant improvement in amount of time taken, accuracy of fixation and the number of exposures after the training on simulator system. This was statistically significant using paired student t-test (p-value <0.05). Computer navigated training system appears to be a good training tool for young orthopaedic trainees The system has the potential to be used in various other orthopaedic procedures for learning of technical skills aimed at ensuring a smooth escalation in task complexity leading to the better performance of procedures in the operating theatre

The benefit of using a long intramedullary device for the treatment of geriatric intertrochanteric hip fractures is unknown. The InterTAN device (Smith and Nephew, Memphis TN) is offered in either Short (180–200 mm) or Long (260–460 mm) constructs and was designed to provide stable compression across primary intertrochanteric fracture fragments. The objective of our study was to determine whether Short InterTANs are equivalent to Long InterTANs in terms of functional and adverse outcomes for the treatment of geriatric intertrochanteric hip fractures. 108 patients with OTA classification 31A–1 and 31A–2 intertrochanteric hip fractures were included in our study and prospectively followed at one of four Canadian Level-1 Trauma Centres. Our primary outcomes included two validated primary outcome measures: the Functional Independence Measure (FIM), to measure function, and the Timed Up and Go (TUG), to measure motor performance. Secondary outcome measures included blood loss, length of procedure, length of stay and adverse events. A pre-injury FIM was measured by retrospective recall and all postoperative outcomes were assessed on postoperative day 3, at discharge, at 6 weeks, 3 months, 6 months and 12 months postoperatively. Unpaired t-tests and Chi-square tests were used for the comparison of continuous and categorical variables respectively between the Short and Long InterTAN groups. A statistically significant difference was defined as p<0.05. Our study included 71 Short InterTAN and 37 Long InterTAN patients with 31A–1 and 31A–2 intertrochanteric hip fractures. Age, sex, BMI, side, living status and comorbidities were similar between the two groups. The mean operative time was significantly lower in the Short InterTAN group (61 mins) as compared to the Long InterTAN group (71 mins)(p0.05). There were 5 periprosthetic femur fractures in the short InterTAN group versus 1 in the long InterTAN group. Non-mechanical adverse outcomes such as myocardial infarction, pulmonary embolism, urinary tract infections, pneumonia and death all had similar incidence rates between the two InterTAN groups. Both the Short and Long InterTAN patient cohorts displayed similar improvements in performance and overall function over the course of a year following intertrochanteric hip fracture fixation. The recorded operative times for Short InterTAN fixation were significantly shorter than those recorded for the Long InterTAN patients. Alternatively, a significantly higher proportion of Short InterTAN patients sustained periprosthetic femur fractures within a year of implantation as compared to the Long InterTAN group

Introduction. Failed operated intertrochanteric fractures (with screw cutout, joint penetration, varus collapse, nonunion, or femoral head avascular necrosis) pose treatment dilemmas. The ideal approach is re-osteosynthesis with autologous bone grafting. When the femoral head is unsalvageable, conversion to a prosthetic hip replacement is necessary. Materials/Methods. Thirty-seven patients with failed dynamic hip screw fixation (and unsalvageable femoral heads) were treated with cementless hip arthroplasty (13 underwent Bipolar Arthroplasty, 24 had Total Hip Arthroplasty) over a 5-year period (Dec 2005 to Nov 2010). Seven needed a modified trochanteric split, and the rest were managed by standard anterolateral approach. Abductor mechanism was reconstructed using strong nonabsorbable sutures (ethibond 5) or stainless steel wires. The calcar was partially reconstructed using remnant femoral head and cerclage wiring in a few cases. Results. Clinico-radiological assessment was done at three, six, 12 months and yearly thereafter over an average 36 months (range, three to 60 months). Stem loosening, lysis, subsidence and trochanteric union were studied. At last follow-up, one patient had died, and there were two instances each of stem subsidence and trochanteric nonunion. Clinical results using Harris hip scores were good or excellent. Conclusion. Management of nonsalvageable femoral heads after failed intertrochanteric fracture fixation is possible with cementless hip arthroplasty. Successful outcomes depend on functional abductor reconstruction, fracture and femoral shaft penetration prevention. Autograft, allograft or head/neck replacement components are necessary sometimes

Introduction. It is estimated 5% of patients over 65 years receive warfarin therapy. This paper aims to analyse whether a time delay to hip fracture fixation while waiting for the patients International Normalised Ratio (INR) to return to normal increases the mortality risk. Methods. A prospective database of 937 hip fractures was analysed. Patient demographics and time from admission to operation were recorded. The patients' INR on admission and during the preoperative period, the need for vitamin K reversal, and any postoperative thromboembolic compilations were recorded. Thirty-day mortality was obtained from the General Register Office for Scotland. Patients with a therapeutic INR were categorised into two groups: those who received vitamin K within 24 hours of admission and those who did not. Results. There were 27 patients (74% female, mean age 80.9 years) receiving warfarin for atrial fibrillation. Two patients had a subtherapeutic INR on admission and were excluded from further analysis. Nine of eleven patients receiving vitamin K (mean dose 1.3mg) had surgery within 48 hours of admission, whereas only five of the fourteen patients who did not receive vitamin K had surgery within this time (OR3.6, p=0.047). There were no thromboembolic complications during admission for either group. Thirty-day mortality was increased for both groups relative to standard rate (OR1.5, p=0.5, and OR2.4 p=0.2 respectively), but there was no significant difference between the groups (p=0.9). Conclusion. Patients with a fractured hip who are receiving warfarin for atrial fibrillation and have a therapeutic INR should receive low dose vitamin K on admission to facilitate early operative intervention and rehabilitation

Fracture neck of femur (NOF) is a significant morbidity in the elderly patient and a significant burden on the healthcare system. Surgery induces a stress response resulting in hyperglycaemia, insulin resistance, and glucose intolerance (Diabetic triad). Furthermore, fasting pre operatively establishes a catabolic state. This diabetic state can last up to 3 weeks following surgery and therefore could be associated with the morbidity of diabetes. Methods. 26 patients with fracture NOF were enrolled in this preliminary study. Exclusion criteria included diabetics. Each underwent hemiarthroplasty or Dynamic Hip Screw fixation. Pre and post operative serum glucose levels were taken. 15 patients were selected to have pre and post operative serum insulin levels because of the expensive nature of the test. Results. Normal glucose range = 4-6 mmol/l. Normal insulin range = 17.8 – 173 pmol/l. 21 of 26 patients exhibited post operative hyperglycaemia (range 5 - 16.4mmol/l). 7 of 15 patients tested for insulin remained in our pilot study where pre and post insulin levels were obtained. Insulin is a technically difficult level to take and samples are easily discarded. 6 of 7 Insulin levels showed marked elevation post operatively (range 17.5 – 595.8). Conclusion. We are able to demonstrate that fracture NOF patients exhibit a postoperative hyperglycaemia and insulin resistance. Insulin levels were significantly elevated in 6 cases and established hyperinsulinaemia was present in 50% of cases. This pilot study determines that a post operative type 2 diabetic state is induced by surgery for fracture neck of femur, perhaps exacerbated by the catabolic state of fasting. If we are able to diminish this we may be able to mitigate morbidity associated with this diabetic state. This in turn may improve the morbidity and burden on our healthcare system

Introduction. Following National patient safety alert on cement use in hip fracture surgery, we investigated the incidence and pattern of 72 hours peri-operative mortality after hip fracture surgery in a District General Hospital. Methods. We reviewed all patients who had hip fracture surgery between 2005-April, 2010. We recorded demographic variables, type of fracture, implant used, medical co-morbidity, seniority of operating surgeon and anaesthetist, peri-operative haemodynamic status, time and cause of death. Results. Over a 64 month period 15 cases were identified. Peri-operative death (PAD) was 1% (15/1402). 4/15 patients died intra-operatively. PAD was highest following Exeter Trauma Stem (ETS) implantation (5/85, 6%) and nil following Bipolar arthroplasty, Austin-Moore arthroplasty (AMA) or Cannulated screw fixation. PAD following total hip arthroplasty was 4% (1/25), Thompson's hemi-arthroplasty 2% (3/191), and Dynamic Hip Screw fixation 1% (6/695). Overall mortality after cemented implant was 2%. ETS implantation led to significantly increased peri-operative mortality compared to AMA (p=0.004). Operations were performed by both trainees (12) and Consultants (3). Both trainees (9) and Consultants (6) anaesthetised the patients. None of the patients belonged to ASA I or II (ASA III 6 and IV 9). All patients had significant cardio-vascular or pulmonary co-morbidity (Ca Lung 2, pulmonary fibrosis 1, end stage COAD 1, AF 6). Cemented implant insertion was followed by immediate haemodynamic collapse and death in 4/15, intra-operative haemodynamic instability in 1/15 and peri-operative instability in 5/15. Post-mortem was performed in 5/15: 2/5 were Pulmonary Embolism (PE), 2/5 bronchopneumonia and 1/5 Myocardial infarction (MI). 4/15 had suspected MI and 1/15 suspected PE. Conclusion. There was 1% risk of peri-operative death after hip fracture surgery. This risk was increased following cemented hemiarthroplasty and highest after ETS implantation. Risk was exacerbated in patients with pre-existing cardiovascular morbidity and independent of the seniority of the surgeon or the anaesthetist

Hip fracture is associated with highest mortality following trauma in the elderly. The objective of this study is to evaluate the association between duration of anaesthesia and duration of surgery with 30 days mortality following hip fracture surgery. This retrospective cohort study reviewed patients underwent surgery following hip fracture in a district general hospital. Patients less than 65 years, periprosthetic and pathological fractures were excluded. Totally 254 patients were included in the study, who had surgery between February 2005 and September 2008 (20 months period). Mortality details retrieved through National Statistics database. Chi Square tests and Logistic regression analyses were performed to check the relationship between 30 days mortality and all independent variables including duration of anaesthesia and duration of surgery. The incidence of 30 days mortality following hip fracture surgery was 9.4%. The commonest reason of death was cardiac failure and chest infection. Patients who had General anesthesia (GA) had more complications and mortality in comparison with those who had regional anaesthesia. GA increases the odds of 30 days mortality to 2.5 times. Patients under American Society of Anesthesiologists (ASA) II had decreased odds of 30 days mortality than ASA III & IV (odds Ratio 0.16). However duration of anesthesia up to 120 minutes and duration of surgery up to 90 minutes were not associated with 30 days mortality (P>0.05). The 30 days mortality following dynamic hip screw fixation surgery was 14.6% and intra medullary nail was 12.5%. The 30 days mortality in cemented hemi-arthroplasty was 6.9% and uncemented hemi-arthroplasty was 6%. The 30 days mortality was nil in the group of patients who had undergone cannulated hip screw fixation. In elderly people following hip fracture surgery 30 days mortality was not affected by duration of anaesthesia and duration of surgery. However 30 days mortality was related with GA, ASA III & IV and post-operative complications mainly cardiac failure and chest infection. These patients need specialist medical care

Geriatric hip fracture patients have a 14-fold higher 30-day mortality than their age matched peers. Up to 50% of these patients receive blood transfusion perioperatively. Both restrictive and liberal transfusion policies are controversial in this population. Aim: The longitudinal description of transfusion practice in geriatric hip fracture patients in a major trauma centre. An 8-year (2002–2009) retrospective study was performed on patients over the age of 65 undergoing hip fracture fixation. Yearly transfusion rate; the influence of transfusion on 30-day, 90-day and 1-year mortality and length of stay (LOS) was investigated. On admission haemoglobin (Hb), pre-transfusion Hb and post-transfusion Hb and their effect on transfusion requirement and mortality was also reviewed. The yearly changes in on-admission and pre-transfusion Hb were also examined. The influence of comorbidities, timing, procedure performed and operation duration on transfusion requirement and mortality was also studied. From the 3412 patients, 35% (1195) received transfusion during their hospital stay. There was no change in age, gender and co-morbidities during the study. Thirty-day mortality improved from 12.4% in 2002 to 7% in 2009. The transfusion rate showed a gradual decrease from the highest of 48.3% (2003) to 22.9% (2009) (Pearson correlation - R2 = −0.707, p=0.05). There was no change during the study period in on-admission and pre-transfusion Hb. The mortality for non-transfused and transfused patients was [9.6% vs. 10.3 % (30-day)], [17.2% vs. 18.4%(90-day)] and [27% vs. 30.5%(1-year), p=0.031]. LOS was 11±9 for non-transfused patients and 13±10 (p<0.001) for transfused patients. Patients with more comorbidities experienced a higher transfusion rate, (0 – 31%, 1 – 38%, 2 – 46%, 3 – 57%), (Pearson Chi-squared, p<0.001). The need for transfusion by different procedures in decreasing order was 47.6% intramedullary device, 44.0% DHS, 25.2% cemented hemiarthroplasty, 23.6% Austin-Moore, and 5.5% cannulated screws. The length of the operation increases the chance of transfusion (<1hrs, – 33%, 1–2hrs – 35%, 2–3hrs – 41%, >3 hours – 65%), (Pearson Chi-squared, p=0.010). Preoperative waiting time had no influence on transfusion frequency (<24hrs – 36%, 24–48hrs – 34%, 48–96hrs – 36%, >96hrs – 33%), (Pearson Chi-squared, p=0.823). The percentage of transfused geriatric hip fracture patients halved during the eight-year period without changes in demographics and co-morbidities. Perioperative transfusion of hip fracture patients is associated with higher 1-year mortality and increased LOS. A more restrictive transfusion practice has been safe and may be a factor in the improved 30-day mortality

Purpose. Primary internal fixation of uncomplicated scaphoid fractures offers many advantages compared to conventional casting. However, ideal fixation placement along the central scaphoid axis can be challenging, especially if the procedure is performed percutaneously. Because of the lack of direct visualization, percutaneous procedures demand liberal use of imaging, thereby increasing exposure to harmful radiation. It has been demonstrated that computer-assisted navigation can improve the accuracy of guidewire placement and reduce X-ray exposure in procedures such as hip fracture fixation. Adapting the conventional computer-assist paradigm, with preoperative imaging and intraoperative registration, to scaphoid fixation is not straightforward, and thus a novel tactic must be conceived. Method. Our navigation procedure made use of a flatpanel C-arm (Innova, GE Healthcare) to obtain a 3D cone-beam CT (CBCT) scan of the wrist from which volumetrically-rendered images were created. The relationship between the Innova imager and an optical tracking system (OptoTrak Certus, Northern Digital Inc.) was calibrated preoperatively so that an intraoperatively-acquired image could be used for real-time navigation. Optical markers fitted to a drill guide were used to track its orientation, which was displayed on a computer monitor relative to the wrist images for navigation. Randomized trials were conducted comparing our 3D navigated technique to two alternatives: one using a standard portable C-arm, and the other using the Innova flatpanel C-arm with 2D views and image intensification. A model forearm with an exchangeable scaphoid was constructed to provide consistency between the trials. The surgical objective was to insert a K-wire along the central axis of a model scaphoid. An exposure meter placed adjacent to the wrist model was used to record X-ray exposure. Procedure time and drill passes were also noted. CT scans of the drilled scaphoids were used to determine the shortest distance from the drill path to the scaphoid surface. Results. The closest distance from the drill path to the scaphoid surface was significantly larger using navigation compared to the 2D Innova method (p<0.05). Fewer drill passes were required using navigation compared to a conventional C-arm (p<0.01). Navigated procedures were significantly longer, although the overall time remained clinically acceptable (∼4min). There was no significant difference in radiation exposure to the patient between the three methods. The 3D CBCT image was acquired remotely in the navigated approach, so conceivably the exposure to the surgeon was much less than the other techniques. Conclusion. Computer-assisted navigation was successfully adapted to percutaneous scaphoid fixation without requiring the tedious preoperative imaging and intraoperative registration that typically plague these procedures. Navigation resulted in superior central screw placement with fewer drilling attempts in comparison to conventional techniques

Introduction. Conversion of immovable hip to a total hip arthroplasty provides a solution, improving function, reducing back and knee pain, and slowing degeneration of neighboring joints associated with hip dysfunction while the mobilization by total hip arthroplasty is rather uncommon and challenging surgery. Materials and methods. Since 1998 we have performed 28 uncemented total hip arthroplasties for arthrodesed or ankylotic Hip. Among them 25 hips in 24 patients (four males and 20 females) with minimum of six months follow-up were evaluated. Thirteen hips were arthrodesed and twelve hips were ankylotic. One patient had arthrodesed hip in one side and ankylotic one in the other side. The mean age at the surgery was 63 (42 to 80). Two patients were Jehovah's witnesses. All 13 arthrodeses had been performed at other hospitals due to developmental dysplasia (11 hips), tuberculous coxitis (one hip), and infection after osteotomy (one hip). The underlying disease for the ankylosis was tuberculous coxitis for one hip and dysplastic osteoarthritis for 12 hips. Spongiosa Metal Cup (GHE, ESKA Orthodynamics AG, Lübeck, Germany) was used for 21 hips (screw fixation was added for two hips), Alloclassic Cup (Zimmer GmbH, Winterthur, Switherland) for one hip, Bicon Plus Cup (Smith & Nephew AG, Rotkreuz, Switherland) for one hip, and Müller's Reinforcement Ring (Zimmer GmbH, Winterthur, Switherland) for two hips. The bearing couple was ceramic on ceramic (Biolox forte, Ceramtec AG, Prochingen, Germany) for 14 hips, ceramic on polyethylene for eight hips, and metal on metal for three hips. Spongiosa Metal Stem (GHE, ESKA Orthodynamics AG, Lübeck, Germany) was used for 15 hips, SL Plus Stems (Smith & Nephew AG, Rotkreuz, Switherland) for nine hips, and Alloclassic Stem (Zimmer GmbH, Winterthur, Switherland) for one hip. All surgeries were carried out through an anterolateral approach. Twelve hips required the adductor tenotomy against the stiffness. The average follow-up period was 3.7 (0.5 to 10.6) years. Result. The average total blood loss during total hip arthroplasty was 685 (150 to 2042) milliliters and the average operative time was 102 (64 to 178) minutes. A perforation occurred in one femur. In this patient a plate (used for the previous arthrodesis) was buried in the femoral cortex. Trochanteric fracture occurred in another hip. The average post-operative range of motion was 65 (35 to 100) degrees in flexion, 2 (−10 to 15) in extension, 18 (5 to 30) in abduction, 10 (5 to 20) in adduction, 25 (10 to 45) in external rotation, and 14 (−5 to 30) in internal rotation. We had no postoperative dislocation. One patient required one-stage revision because of the recurrent infection at three years after the primary total hip arthroplasty. In all other patients the implants were stable at the final follow-up. Conclusions. An immovable hip brings about a lot of inconveniences. Though the surgery involved technical difficulties, it provided a better quality of life for the patients. Mobilization by means of uncemented total hip arthroplasty can be carried out successfully for immovable hips

Purpose. Femoroacetabular impingement (FAI) may contribute to the development of early onset hip osteoarthritis (OA). A cam lesion (or pistol grip deformity) of the proximal femur reduces head-neck offset resulting in cam type FAI. The alpha angle is a radiographic measurement recommended for diagnosis of cam type FAI. The purpose of this study was to determine if patients that develop end stage hip OA prior to 55 years of age have radiographic evidence of cam type FAI. Method. The anteroposterior (AP) pelvis and lateral hip radiographs of 244 patients (261 hips) who presented to our institution for hip arthroplasty or hip fracture fixation between 2006 and 2008 were retrospectively reviewed. Three cohorts were compared: 1) patients with end stage hip OA < 55 years old (N=76); 2) patients with end stage hip OA > 55 years old (N=84); 3) hip fracture patients > 65 years old without radiographic evidence of hip arthritis were used as controls (N=101). Patients with inflammatory arthritis, avascular necrosis and post-traumatic hip OA were excluded. Alpha angles were measured on the AP pelvis and lateral radiographs by three coauthors using ImageJ 1.43 software (National Institutes of Health, USA). For patients with end stage hip OA, AP alpha angles were measured on both the hip with OA and the contralateral hip. Lateral alpha angles were measured only on the hip with OA. For patients with hip fracture, AP alpha angles were measured on the non-fractured hip and lateral alpha angles were measured on the fractured hip. A one-way ANOVA with post hoc Tukeys HSD test was used to compare the AP and lateral alpha angles for the three cohorts. Results. The intraclass correlation coefficient (ICC) for the three coauthors measuring AP and lateral alpha angles was 0.85 and 0.86 respectively, indicating excellent inter-rater agreement. Patients < 55 years old with end stage hip OA had the largest AP and lateral alpha angles (82.711.6 degrees AP and 63.918.5 degrees lateral). These angles were significantly larger (p<0.01 for both comparisons) than patients > 55 years old with end stage hip OA (71.717.8 degrees AP and 55.518.0 degrees lateral) and hip fracture patients without hip OA (52.710.9 degrees AP and 44.411.4 degrees lateral). Comparing AP alpha angles of the contralateral hips, the mean AP alpha angle for patients < 55 years old with hip OA (70.813.2 degrees) was significantly larger (p=0.04) than patients > 55 years old with hip OA (64.516.2 degrees) which in turn was significantly larger (p<0.01) than the hip fracture patients (52.710.9 degrees). Conclusion. Patients < 55 years old with hip OA had the largest mean AP and lateral alpha angles, significantly larger than patients > 55 years old with hip OA and hip fracture patients without hip OA. Thus young patients with end stage hip OA do have radiographic evidence of cam type FAI. Furthermore, this case-controlled study suggests that cam type FAI may contribute to the development of early onset hip OA