Introduction. There is no doubt that the future of limb lengthening lies with internal lengthening. Complication rates are reduced and patient satisfaction is increased. The evolution of internal lengthening peaked with the dual direction, easily inserted and externally controlled PRECICE Nail. It has excelled in performance in accuracy and satisfaction. Its versatility increased with smaller sizes and increased excursion. A field safety notice was issued was issued in October 2021 by the parent company NuVasive. The advice was monitoring of current cases and a hold on implantation until after a review of process. At the National Orthopaedic Hospital Cappagh we elected to remove all implanted nails and assess the nail integrity and physiological changes associated with implantation. Materials & Methods. All patients in who a retained Precice nail at the time of the field safety notice were identified. Patients and families were contacted to explain the issued safety notice from the company and explain that we would be scheduling them for nail removal. This was part of our standard care but we prioritised this group on our waiting list. Consent was obtained for nail removal but also for histological assessment of canal scrapings, blood ion level analysis and independent assessment of the retrieved nail by our academic collaborators at University College Dublin. Ion levels were then repeated at an interval post removal with consent. Results. We identified 7 Precice nails in 5 patients still implanted. All patients had consolidated after lengthening and were ready for nail removal. Elevated Titanium blood ion levels were identified at the time of retrieval. Histological abnormalities consistent with metalosis were identified. In all cases the nail was grossly intact and examination of the motor showed no evidence of wear or failure. Follow up ion levels obtained post retrieval showed persistent elevation. Conclusions. Our retrieval audit shows persistent elevation of Titanium ion levels and abnormal histology despite apparent nail integrity. These findings require further evaluation in a larger retrieval series to determine if there is a high incidence of this phenomenon and if ion levels have a clinical effect

Poor availability of allografts in South Africa has led to an increased use of synthetic augmentation to stabilize knee joints in the treatment of knee dislocations. This study aims to evaluate multiligament knee injuries treated with a posterior cruciate ligament internal brace. The study included patients with knee dislocations who were treated with a PCL internal brace. The internal brace involved the insertion of a synthetic suture tape, which was drilled into the femoral and tibial footprint. Chronic injuries were excluded. Patient-reported outcome scores (PROMs), range of motion, stress X-Rays, and MRI scans were reviewed to assess outcomes. Acceptable outcomes were defined as a Lysholm score of 84 or more, with grade II laxity in no more than one ligament and a range of motion from full extension to 90° or more. The study included eight patients, with a median age of 42, of which five were female. None of the patients had knee flexion less than 90° or an extension deficit of more than 20°. PROMs indicated acceptable outcomes (EQ5D, Tegner Lysholm). Stress radiographs showed less than 7mm (Grade I) of posterior translation laxity in all patients. Four patients underwent MRI scans 1–2 years after the initial surgery, which revealed healing of the PCL in all patients. However, increased signal in a continuous ligament suggested only partial healing in two patients. Tunnel widening of 200% and 250% was noted around the tibial and femoral PCL footprints, respectively. All patients demonstrated stable knees and acceptable PROMs. Tunnel widening was observed in all patients who had MRI scans. Factors such as suspensory fixation, anisometric tunnel position, and the absence of PCL tear repair may have contributed to the tunnel widening

Introduction. Circular external fixators are fundamental to lower limb reconstruction, primarily in situations with a high risk of infection such as open fractures. During the Covid-19 pandemic, use of circular frames in our unit decreased, following departmental approval, due to resource management and in keeping with BOA guidelines as we opted to “consider alternative techniques for patients who require soft tissue reconstruction to avoid multiple operations”. These alternatives included the use of internal fixation (plate osteosynthesis and intramedullary nailing) as a measure to reduce the number of hospital attendances for patients and to conserve resources. This change in practice has continued in part following the pandemic with the increased use of internal fixation in cases previously deemed unsuitable for such techniques. We present our experience of this treatment strategy in the management of complex lower limb injuries, focusing on outcomes and consider the lessons learnt. Materials & Methods. Data of patients with complex lower limb injuries treated before, during and after the pandemic were collected from our in-house trauma database, theatre records and follow up clinics. The rationale for choosing other techniques over a circular frame, the type of alternative technique used, the cost of such alternatives, the need for soft tissue reconstruction, time to recovery, complications and amputation rates were compared among groups. Results. These data suggest comparable outcomes between circular frames and alternative techniques can be achieved. A notable reduction in the number of circular frames applied during the review period was observed. Furthermore, frame fixation was associated with more frequent outpatient review and the associated implications for resource management. Conclusions. Conclusion: The Covid-19 pandemic has posed great challenges to the Trauma and Orthopaedic community, forcing us to be flexible by adopting alternative treatment methods to traditional circular external fixation. These alternatives have proven feasible and potentially more cost effective, prompting their adoption in the post pandemic era. However, this change of practice is not without potential consequences and continued investigation is warranted

Introduction. Ankle fractures in the elderly have been increasing with an ageing but active population and bring with them specific challenges. Medical co-morbidities, a poor soft tissue envelope and a requirement for early mobilisation to prevent morbidity and mortality, all create potential pitfalls to successful treatment. As a result, different techniques have been employed to try and improve outcomes. Total contact casting, both standard and enhanced open reduction internal fixation, external fixation and most recently tibiotalocalcaneal (TTC) nailing have all been proposed as suitable treatment modalities. Over the past five years popular literature has begun to herald TTC nailing as an appropriate and contemporary solution to the complex problem of high-risk ankle fragility fractures. We sought to assess whether, within our patient cohort, the outcomes seen supported the statement that TTC has equal outcomes to more traditional open reduction internal fixation (ORIF) when used to treat the high-risk ankle fragility fracture. Materials & Methods. Results of ORIF versus TTC nailing without joint preparation for treatment of fragility ankle fractures were evaluated via retrospective cohort study of 64 patients with high-risk fragility ankle fractures without our trauma centre. We aimed to assess whether results within our unit were equal to those seen within other published studies. Patients were matched 1:1 based on gender, age, Charlson Comorbidity Index (CCI) and ASA score. Patient demographics, AO/OTA fracture classification, intra-operative and post-operative complications, discharge destination, union rates, FADI scores and patient mobility were recorded. Results. There were 32 patients within each arm. Mean age was 78.4 (TTC) and 78.3 (ORIF). The CCI was 5.9 in each group respectively with mean ASA 2.9 (TTC) and 2.8 (ORIF). There were two open fractures within each group. Median follow up duration was 26 months. Time to theatre from injury was 8.0 days (TTC) versus 3.3 days (ORIF). There was no statistically significant difference in 30-day, one year or overall mortality at final follow up. Kaplan-Meier survivorship analysis did however demonstrate that of those patients who died post-operatively the mean time to mortality was significantly shorter in those treated with TTC nailing versus ORIF (20.3 months versus 38.2 months, p=0.013). There was no statistical difference in the overall complication rate between the two groups (46.9% versus 25%, p=0.12). The re-operation rate was twice as high in patients treated with TTC nailing however this was not statistically significant. There was no statistical difference in the FADI scores at final follow up, 72.1±12.9 (TTC) versus 67.9±13.9 (ORIF) nor post-operative mobility status. Conclusions. Within our study TTC nailing with an unprepared joint demonstrated broadly equivalent results to ORIF in the management of high-risk ankle fragility fractures; this replicates findings of previous studies. We did however observe that mean survival was significantly shorter in the TTC group than those treated with ORIF. We believe this may have been contributed to by a delay to theatre due to TTC stabilisation being treated as a sub-specialist operation in our unit at the time. We propose that both TTC and ORIF are satisfactory techniques to stabilise the frail ankle fracture however, similarly to the other fragility fractures, the priority should be on an emergent operation in a timely fashion in order to minimise the associated morbidity and mortality. Further randomised control studies are needed within the area to establish definitive results and a working consensus

Introduction. We demonstrate the preliminary results with a novel technique to solve large bone defects using two lengthening nails, working together and aligned in a custom made device. An illustrative case that successfully produced 17 cm bone in 3.5 months, is presented. Materials and Methods. A 28 year old healthy male presented with a slowly growing mass in the left femur. No general symptoms were reported, no weight loss, no previous illness. Histopathology, CT and MRI scans revealed a malignant diaphyseal bone tumor. A three-stage trifocal bone transport was projected and conducted based on a 3D model test. Results. Trifocal bone transport using two lengthening nails in a custom made device, reduced the 17 cm bone defect in 3.5 months. Follow up was 9 months. Conclusions. The presented technique successfully solved the clinical problem and is a showcase for further developments of internal devices for complex and large bone losses and lengthenings

Introduction. Femoral shaft fractures in children is a serious injury that needs hospitalization, with a high prevalence in the age group 6–8 years old. Various treatment options are available and with a comparable weight of evidence. Submuscular plating provides a dependable solution, especially in length-unstable fractures and heavier kids. We present a novel technique to facilitate and control the reduction intraoperatively, which would allow for easier submuscular plate application. Materials and Methods. We have retrospectively reviewed four boys and three girls; all were operated in one centre. Polyaxial clamps and rods were applied to the sagittally-oriented bone screws, the reduction was done manually, and the clamps were tightened after achieving the proper alignment in the anteroposterior and lateral fluoroscopy views. The submuscular plate was applied as described, then clamps and bone screws were removed. Results. The mean age at surgery was 13 years (range, 9–14). The mean body weight was 43.3 kg (range, 30–66). There were five mid-shaft fractures, one proximal third and one distal third. There were Four type A fractures, two type B and one type C. Four patients had road traffic accidents while three had direct trauma. The mean preoperative haemoglobin concentration 12.5 g/dl (range 11.3–13 g/dl). No blood transfusion was needed intraoperatively or postoperatively. The operative time averaged 122 minutes, and the mean hospital stay was one (range 1–4 days). The patients reported no pain at a mean of 1.5 weeks (range, one-three weeks). All fractures united at a mean of 8.7 weeks (range 6–12 weeks). No wound healing problems nor deep infections happened. The knee joint range of motion was full in all patients at six weeks postoperatively. There was no mechanical irritation from the inserted plate. At the final follow-up, all fractures united without malalignment nor length discrepancy. Conclusions. External fixator-assisted internal fixation of pediatric femoral fractures would facilitate the accuracy and control of fracture reduction and allow minimally invasive percutaneous osteosynthesis. Our study has shown a decrease in operative time, and an accompanying reduction in length of inpatient stay, prolonged need for analgesia and post-operative rehabilitation

Introduction. Stiffness postTotal Knee Replacement (TKR) is a common, complex and multifactorial problem. Many reports claim that component mal-rotation plays an important role in this problem. Internal mal-rotation of the tibial component is underestimated among surgeons when compared to femoral internal mal-rotation. We believe the internal mal- rotation of thetibial component can negatively affect the full extension of Knee. We performed an in-vivo study of the impact of tibial internal mal-rotation on knee extension in 31 cases. Method. During TKR, once all bony cuts were completed and flexion/extension gaps balanced, we assessed the degree of knee extension using the trial component in the setting of normaltibial rotation and with varying degrees of internal rotation (13–33°, mean 21.2±4.6°). Intra-operative lateral knee X-ray was done to measure the degree of flexion contracture in both groups. We also compared the degree of flexion contracture between CR and PS spacers. Results. The average degree of knee flexion contracture with normal rotation of the tibial component was 0.7±4.1° (range:-9 to 10), whereas after tibial internal rotation was 7.3±4.6° (range:-1 to 23)(P – value:0.001). The increase in the flexion contracture deformity was higher with PS spacer (7.18±2.61) than with CR spacers (5.22±2.05). Conclusion. The internal mal-rotation of the tibial component limits the ability of the tibia to externally rotate on the femur, thereby limiting full knee extension and leading to flexion contracture

Internal fixation remains the treatment of choice for non-displaced femoral neck fractures in elderly patients, whereas, arthroplasty is preferred for displaced fracture patterns. Given technological advancements in implant design and excellent long-term outcomes, arthroplasty may provide improved outcomes for the treatment of non-displaced femoral neck fractures. The aim of our study was to conduct a systematic review of the orthopaedic literature (1) to investigate the outcomes of internal fixation for the treatment of non-displaced and minimally displaced femoral neck fractures in elderly patients and (2) to compare the outcomes of patients treated with internal fixation to arthroplasty in this patient population. Relevant articles were identified using PubMed, Embase, and CENTRAL databases. Manuscripts were included only if they contained (1) patients 60 years or older with (2) nondisplaced or minimally displaced (Garden I or II) femoral neck fractures (3) treated with internal fixation or arthroplasty or (4) separately reported outcomes in this patient population. The primary outcome was reoperation. Secondary outcomes included mortality, patient reported outcomes, length of hospital stay, infection, and transfusions. An a priori decision was made to classify studies into comparative or non-comparative groups. Comparative studies directly compared arthroplasty to internal fixation in the specific study population while the non-comparative studies included separate cohorts of patients treated with arthroplasty or internal fixation. A fixed-effects model was used to quantitatively pool study outcomes. Twenty-five non-comparative studies were identified with a total of 22,020 patients, all of which were treated with internal fixation. The pooled incidence of reoperation after internal fixation was 14.4% (95% CI: 10.8 – 18.8). The incidence of mortality within one-year of injury was 14.4% (95% CI: 6.7 – 28.3), based on the reporting in 14 studies. Three comparative studies were identified with a total of 360 patients (128 treated with arthroplasty and 232 treated with internal fixation). All three studies reported reoperation rates. The overall risk of reoperation was 3.1% in the arthroplasty group compared to 9.5% in the internal fixation group (relative risk: 0.30, 95% CI: 0.10 – 0.84, p= 0.02). Only two studies reported mortality. The relative risk of mortality in patients treated with arthroplasty compared to internal fixation was 2.54 (95% CI: 1.38 – 4.70, p= 0.003). Internal fixation of minimally displaced femoral neck fractures in the elderly is associated with a risk of reoperation and mortality that exceeds 14%. Treatment with arthroplasty may reduce the risk of reoperation by 70%. However, this benefit maybe tempered by a potential increased risk of mortality associated with arthroplasty in this patient population

Introduction. Osteoarthritis (OA), a painful, debilitating joint disease, often caused by excessive joint stress, is a leading cause of disability (World Health Organisation, 2003) and increases with age and obesity. A 5° varus malalignment increases loading in the medial knee compartment from 70% to 90% (Tetsworth and Paley, 1994). Internal unloading implants, placed subcutaneously upon the medial aspect of the knee joint, are designed to offload the medial compartment of the knee without violating natural joint tissues. The aim of this study is to investigate the effect of an unloading implant, such as the Atlas™ knee system, on stress within the tibiofemoral joint with different grades of cartilage defects. Methods. To simulate surgical treatment of medial knee OA, a three-dimensional computer-aided design of an Atlas™ knee system was virtually fixed to the medial aspect of a validated finite element knee model (Mootanah, 2014), using CATIA v5 software (Dassault Systèmes, Velizy Villacoublay, France). The construct was meshed and assigned material properties and boundary conditions, using Abaqus finite element software (Dassault Systèmes, Velizy Villacoublay, France). A cartilage defect was simulated by removing elements corresponding to 4.7 mm. 2. The international cartilage repair society (ICRS) Grade II and III damage were simulated by normalized defect depth of 33% and 67%, respectively. The femur was mechanically grounded and the tibia was subjected to loading conditions corresponding to the stance phase of walking of a healthy 50-year-old 68-Kg male with anthropometrics that matched those of the cadaver. Finite element analyses were run for peak shear and von Mises stress in the medial and lateral tibiofemoral compartments. Results. Von Mises stress distribution in the tibial cartilage, with ICRS Grade II and III defects, without the unloading implant, at the end of weight acceptance (15% of the gait cycle) were analysed. The internal unloading implant reduces peak von Mises stress by 40% and 43% for Grade II and Grade III cartilage defects, respectively. The corresponding reductions in shear stress are 36% and 40%. Consistent reduction in peak von Mises stress values in the medial cartilage-cartilage and cartilage-meniscus contact areas were predicted throughout the stance phase of the gait cycle for ICRS Grade II defect. Similar results were obtained for Grade III defect and for peak shear stress values. There were no overall increases in peak von Mises stress values in the lateral tibial cartilage. Discussion and Conclusions. The internal unloading implant is capable of reducing von Mises and shear stress values in the medial tibial cartilage with ICRS Grade II and III defects at the cartilage-cartilage and cartilage-meniscus interfaces throughout the stance phase of the gait cycle. This did not result in increased stress values in the lateral tibial cartilage. Our model did not account for the viscoelastic effects of the cartilage and meniscus. Results of this study are based on only one knee specimen. The internal unloading implant may protect the cartilage in individuals with medial knee osteoarthritis, thereby delaying the need for knee replacements

Repetitive manual handling caused 31% of all work related musculoskeletal disorders in 2015, with the back being the site of injury 38% of the time. Despite its high resilience, studies have shown that intervertebral discs can be damaged during repetitive loading at physiological motions, causing cumulative damage and disc herniation. To understand the mechanism of disc injury resulting from repetitive lifting, it is important to measure disc deformations/strains accompanied by MRI imaging to identify disc tissue damage. Therefore, the aim of this study was to examine associations between the magnitude of 3D internal strains, tissue damage and macroscopic evidence of disc injury after simulated repetitive lifting on normal human lumbar discs. Sixteen cadaver lumbar functional spinal units (FSUs) were subjected to pre-test MRI. Eight FSUs (control) underwent 20,000 cycles or until failure (5 mm displacement) of loading under compression (1.7 MPa – to simulate lifting a 20 kg weight) + flexion (13°) + right axial rotation (2°) using a novel Hexapod Robot. The remaining eight FSUs (experimental) had a grid of tantalum wires inserted, and stereoradiographs were taken to track internal disc displacements at increasing cyclic intervals. Maximum shear strains (MSS) were calculated from the displacements using radiostereometric analysis at cycle 1 and 20,000 cycles (or failure). Post-test MRI was conducted to determine the extent of tissue damage and associated with regions of highest MSS. A repeated measures ANOVA was performed on MSS with a within–subjects factor of cycle number (cycle 1 and failure cycle) and a between subjects-factor of disc region and failure type (p < 0 .05). Pfirrmann grading revealed mostly normal discs [I (N=2), II (N=13), and III (N=1)]. No significant difference in MSS between control and experimental groups was found for number of cycles to failure (p=0.279). Pre and post-test MRI analysis revealed that 13 specimens were injured after repetitive lifting with either an endplate failure (N=9) or disc bulge (N=4), and two specimens did not fail. Failure strain was significantly greater than cycle 1 in all regions except posterior, left/right posterolateral (p>0.109). Largest MSS at failure was seen in the anterior (60%), and left/right posterolateral regions (64% and 70%, respectively). MSS at failure for the endplate failure group was significantly larger than the no injury group in all regions except right lateral and nucleus (p>0.707). Disc bulge group MSS was significantly larger than the no injury group in the anterior, right anterolateral, and left/right posterolateral regions (p < 0 .027). Simulated repetitive lifting led to largest shear strains in the anterior, left and right posterolateral regions that corresponded to annular tears or annular protrusion. The no injury group shear strain was less than 50% in all regions, indicating there may be a threshold that could be associated with tissue damage linked with injuries such as disc bulge and endplate failure. There was no evidence of disc herniation in normal discs, agreeing with current clinical knowledge. These results may be indicative of the effects of repetitive manual handling on normal discs of younger patients

Distal radius fractures are the most common adult fractures, yet there remains some uncertainty surrounding optimal treatment modalities. Recently, the rate of operative treatment of these injuries has been increasing, however, predictors of outcomes in patients treated surgically remain poorly understood. The purpose of this study was to evaluate independent predictors of 30-day readmission and complications following internal fixation of distal radius fractures. Patients ≥18 years who underwent surgical intervention for distal radius fractures between 2005 and 2016 were identified from the American College of Surgeons National Surgical Quality Improvement Program (NSQIP) using procedural codes. Patient demographics, as well as 30-day readmission, complication, and mortality rates were ascertained. Multivariable logistic regression was used to determine independent predictors of 30-day outcomes while adjusting for patient age, sex, American Society of Anaesthesiologists (ASA) class, functional status, smoking status, comorbidities, and Body Mass Index (BMI). A total of 10,051 patients were identified (average age 58 ±16). All patients received open reduction and internal fixation with no cases of external fixation identified in the data set. Included fractures were 37% extraarticular and 63% intraarticular. Within 30-days of initial fixation 143 (1.42%) patients were readmitted to the hospital, 71 patients experienced a complication, and 18 (0.18%) patients died. After adjusting for relevant covariables, current smoking increased the odds of readmission by 1.73 (95%Confidence interval [95%CI] 1.15 – 2.50), ASA class III/IV vs. I/II increased the odds of readmission by 2.74 (95%CI 1.85 – 4.06), and inpatient surgery vs. outpatient surgery increased the odds of readmission by 2.10 (95%CI 1.46 – 3.03). Current smoking also increased the odds of complications by 2.26 (95%CI 1.32 – 3.87), while ASA class III/IV increased it by 2.78 (95%CI 1.60 – 4.85), inpatient surgery increased it by 2.26 (95%CI 1.37 – 3.74), and dependent functional status increased it by 2.55 (1.16 – 5.64). In conclusion, patients with severe systemic disease, current smokers and patients undergoing inpatient surgery are at risk for 30-day readmissions and complications following operative treatment of distal radius fractures. In addition, patients with dependent functional statuses are more likely to experience a complication within 30-days

Introduction. Stiffness post Total Knee Replacement (TKR) is a common, complex and multifactorial problem. Many reports claim that component mal-rotation plays an important role in this problem. Internal mal-rotation of the tibial component is underestimated among surgeons when compared to femoral internal mal-rotation. We believe the internal mal-rotation of the tibial component can negatively affect the full extension of Knee. We performed an in-vivo study of the impact of tibial internal mal-rotation on knee extension in 31 cases. Method. During TKR, once all bony cuts were completed and flexion/extension gaps balanced, we assessed the degree of knee extension using the trial component in the setting of normal tibial rotation and with varying degrees of internal rotation (13–33°, mean 21.2±4.6°). Intra-operative lateral knee X-ray was done to measure the degree of flexion contracture in both groups. We also compared the degree of flexion contracture between CR and PS spacers. Results. The average degree of knee flexion contracture with normal rotation of the tibial component was 0.7±4.1° (range: −9 to 10), whereas after tibial internal rotation was 7.3±4.6° (range: −1 to 23) (P – value:0.001). The increase in the flexion contracture deformity was higher with PS spacer (7.18±2.61) than with CR spacers (5.22±2.05). Conclusion. The internal mal-rotation of the tibial component limits the ability of the tibia to externally rotate on the femur, thereby limiting full knee extension and leading to flexion contracture

Management of acetabular fractures in the elderly population remains somewhat controversial in regards to when to consider is open reduction internal fixation (ORIF) versus acute primary total hip. study aims to (1) describe outcome of this complex problem and investigate predictors of successful outcome. This retrospective study analyzes all acetabular fractures in patients over the age of 60, managed by ORIF at a tertiary trauma care centre between 2007 and 2018 with a minimum follow up of one year. Of the 117 patients reviewed, 85 patients undergoing ORIF for treatment of their acetabular fracture were included in the analysis. The remainder were excluded based management option including acute ORIF with THA (n=10), two-stage ORIF (n=2), external fixator only (n=1), acute THA (n=1), and conservative management (n=1). The remainder were excluded based on inaccessible medical records (n=6), mislabelled diagnosis (n=6), associated femoral injuries (n=4), acetabular fracture following hemiarthroplasty (n=1). The mean age of the cohort is 70±7 years old with 74% (n=62) of patients being male. Data collected included: demographics, mechanism of injury, Charlson Comorbidity Index (CCI), ASA Grade, smoking status and reoperations. Pre-Operative Radiographs were analyzed to determine the Judet and Letournel fracture pattern, presence of comminution and posterior wall marginal impaction. Postoperative radiographs were used to determine Matta Grade of Reduction. Outcome measures included morbidity-, mortality- rates, joint survival, radiographic evidence of osteoarthritis and patient reported outcome measures (PROMs) using the Oxford Hip Score (OHS) at follow-up. A poor outcome in ORIF was defined as one of the following: 1) conversion to THA or 2) the presence of radiographic OA, combined with an OHS less than 34 (findings consistent with a hip that would benefit from a hip replacement). The data was analyzed step-wise to create a regression model predictive of outcome following ORIF. Following ORIF, 31% (n=26) of the cohort had anatomic reduction, while 64% (n=54) had imperfect or poor reduction. 4 patients did not have adequate postoperative radiographs to assess the reduction. 31 of 84 patients undergoing ORIF had a complication of which 22.6% (n=19) required reoperation. The most common reason being conversion to THA (n=14), which occurred an average of 1.6±1.9 years post-ORIF. The remainder required reoperation for infection (n=5). Including those converted to THA, 43% (n=36) developed radiographic OA following acetabular fracture management. The mean OHS in patients undergoing ORIF was 36 ± 10; 13(16%) had an OHS less than 34. The results of the logistic regression demonstrate that Matta grade of reduction (p=0.017), to be predictive of a poor outcome in acetabular fracture management. With non-anatomic alignment following fixation, patients had a 3 times greater risk of a poor outcome. No other variables were found to be predictive of ORIF outcome. The ability to achieve anatomic reduction of fracture fragments as determined by the Matta grade, is predictive of the ability to retain the native hip with acceptable outcome following acetabular fracture in the elderly. Further research must be conducted to determine predictors of adequate reduction in order to identify candidates for ORIF

Aim. Unexpected positive infections are distinct entity in prosthetic revision surgery. The prevalence and characteristics of unexpected positive cultures in internal fixation are however less established. The aim of this study was to describe the prevalence and characteristics of unexpected diagnosis of infection in a prospective cohort of revision surgeries following internal fixation. Method. We reviewed the microbiological results following 356 surgeries that included partial or complete removal of internal fixation, performed in 328 patients (54% male, mean age 53 ± 17 years), in which infection was not initially suspected. This prospective study was performed in a large single center for musculoskeletal surgery from 2013–2017. The implants most commonly removed were plate and/or screws (281 cases, 78,9%), followed by intramedullary nails (64 cases, 18,0%). The main indications for surgery were nonunion (89 cases, 25%) and symptomatic hardware (70 cases, 19,7%). All removed implants were sonicated, and tissue cultures were obtained depending on the surgeon's criteria. Diagnosis of infection was established by the presence of 2 or more positive tissue cultures (1 with a highly virulent microorganism), or ≥ 50 colony-forming units found in the sonication fluid. Results. Infection was confirmed in 47 cases (13,2%); diagnosis was obtained with tissue cultures in 5 cases (1,4%), sonication in 14 cases (3,9%) and a combination of both sonication and tissue samples in 28 cases (7,9%). In another 24 cases (6,7%), ≥ 50 CFU of low-virulence microorganisms were isolated in the sonication fluid, but no tissue samples were available to confirm the diagnosis. Low-virulent microorganisms such as Propionibacterium acnes (22 cases / 46,8%) or coagulase-negative Staphycoccci (13 cases, 27,7%) were most commonly isolated. Sonication was key for the diagnosis of 61,7% of unexpected-positive surgeries. Nearly half of the patients received a new implant (internal fixation in 40,4%; arthroplasty in 6,4%), but only 34% of the patients were treated with antibiotics on discharge. Conclusions. Unexpected diagnosis of infection occurs in approximately 13,2% of revision surgeries following internal fixation, most commonly due to low-virulent microorganisms. Sonication was key for the diagnosis of the majority of these infections. The clinical relevance of these infections remains unclear, though the insertion of new implants raises concern. We recommend sonication of all internal fixation devices removed, especially if new implants are inserted in the revision surgery

Introduction. While shoulder elevation can be reliably restored following reverse total shoulder arthroplasty (RTSA), patients may experience a loss of internal and external rotation. Several recent studies have investigated scapular notching and have made suggestions regarding glenosphere placement in order to minimize its occurrence. However, very few studies have looked at how changes in glenosphere placement in RTSA affect internal and external rotation. The purpose of this study was to determine the effect of glenosphere position on internal and external rotation range of motion at various degrees of scaption following RTSA. We hypothesized that alteration in glenosphere position will affect the amount of impingement-free internal and external rotation. Methods. CT scans of the scapula and humerus were obtained from seven cadaver specimens and 3-Dimensional (3D) reconstructions were created. A corresponding 3D RTSA model was created by laser scanning the baseplate, glenosphere, humeral stem and bearing. The RTSA models were then virtually implanted into each specimen. The glenosphere position was determined in relation to the neutral position in 6 different settings: Medialization (5 mm), lateralization (10 mm), superior translation (6mm), inferior translation (6 mm), superior tilt (20°), and inferior tilt (15° and 30°). The humerus in each virtual model was allowed to freely rotate at a fixed scaption angle until encountering bone-bone or bone-implant impingement (180 degrees of limitation). Each model was tested at 0, 20, 40, and 60 degrees of scaption and the impingement-free internal and external rotation range of motion for each scaption angle was recorded. Results. At 0Ëš scaption, only inferior translation, lateralization, and inferior tilt allowed any impingement-free motion in IR and ER. At mid ranges of scaption (20Ëš and 40Ëš) a predictable pattern was seen in which increased lateralization and inferior translation resulted in improved rotation. Supraphysiologic motion (>90Ëš rotation) was seen consistently at 60Ëš of scaption in internal rotation. Both superior and inferior tilt positions resulted in increased ROM in the mid-range of scaption. Acromial impingement was seen when the glenosphere was medialized, superiorly translated and with a superior tilt. Superior translation (6 mm) resulted in no rotation at 0 and 20 degrees of scaption (both IR and ER). Figure 1 and 2: Represents the amount of internal (fig. 1) and external rotation (fig. 2) range of motion measured to bony impingement. 180 degrees was set as the physiologic limit for all measurements. Conclusion. Glenosphere position significantly affected humeral internal and external rotation after Reverse Total Shoulder Arthroplasty in our computer model. Inferior translation (6 mm) or lateralization (10 mm) appears to have the most beneficial effects to internal and external rotation of the shoulder. Inferior tilt (15° and 30°) of the glenosphere also improved overall arc of motion in IR and ER when compared to superior tilt and neutral positions. Superior translation (6 mm) and medialization (5 mm) of the glenosphere caused marked limitations in internal and external rotation due to scapular notching and acromial impingement

Purpose. Surgeons sometimes encounter moderate or severe varus deformed osteoarthritic cases in which medial substantial release including semimembranosus is compelled to appropriately balance soft tissues in total knee arthroplasty (TKA). However, medial stability after TKA is important for acquisition of proper knee kinematics to lead to medial pivot motion during knee flexion. The purpose of the present study is to prove the hypothesis that step by step medial release, especially semimembranosus release, reduces medial stability in cruciate-retaining (CR) total knee arthroplasty (TKA). Methods. Twenty CR TKAs were performed in patients with moderate varus-type osteoarthritis (10° < varus deformity <20°) using the tibia first technique guided by a navigation system (Orthopilot). During the process of medial release, knee kinematics including tibial internal rotation and anterior translation during knee flexion were assessed using the navigation system at 3 points; (1) after anterior cruciate ligament resection (pre-release), (2) medial tibial and femoral osteophyte removal and release of minimum deep layer of medial collateral ligament (minimum release) and (3) release of semimembranosus (semimembranosus release). In addition, the kinematics after all prostheses implantation (semimembranosus release group) were assessed and compared with those assessed in another 20 patients in which only minimum release was performed (minimum release group). Results. Kinematic pattern in step by step medial release exhibited external tibial rotation during mid-range of flexion and then shifted to internal tibial rotation toward to 120 degrees of knee flexion (Fig. A). During 60 to 120 degrees of flexion, semimembranosus release significantly reduced the amount of internal tibial rotation compared with pre-release (Fig. 1B). Tibial anterior translation showed no significant differences among each procedure. After all prostheses implanted, the amount of tibial internal rotation during 60 to 120 degrees of knee flexion was significantly maintained in minimum release compared with semimembranosus release group (Fig. 2). Conclusions. Semimembranosus release reduces tibial internal rotation in CR TKA, suggesting that semimembranosus release should be avoided in case of moderate varus-type osteoarthritis for considering medial stability

Purpose of the study:. To determine the outcomes of cases converted from an external fixator to an internal fixation device in the management of limb reconstructions and deformity corrections. Method:. A retrospective review of 18 patients, that underwent a conversion procedure to internal fixation following long term external fixation use, was done. This comprised 24 limbs. Inclusion criteria: All cases of long term external fixator use converted to internal fixation over a 5 year period. Average external fixation time, pin site care, conversion timing, surgical device used as well as outcome were documented. Results:. The mean treatment time in an external fixator was 185 days (61–370). The reasons for conversion included patient dissatisfaction, pin tract sepsis and a refracture. The conversion procedures included 8 intramedullary nail fixations and 16 plate and screw fixations. An acute conversion was identified as an internal fixation that was done in the same sitting as external fixator removal. A delayed conversion was any internal stabilisation that was done thereafter. In total, the complication rate associated with conversion to internal fixation following long term external fixation was 25%, mainly due to persistent non-union or sepsis. In the 8 conversions to intramedullary nails, 7 were acute: 4 had good outcomes with sepsis free union being achieved. 3 had poorer outcomes with a non-union and 2 amputations being documented. The single delayed nailing achieved union. In the 16 conversions to plate fixation, 13 achieved union. 10 were acute conversions and 3 were delayed. The remaining 3 that developed complications included 2 acute conversions with septic non-unions and a single delayed conversion which resulted in sepsis. Conclusion:. Conversion of an external fixator to an internal fixator in a non-acute reconstructive setting has a 75% success rate. In the acute conversion group (19 cases), plate and screw fixation had a superior outcome. In the delayed conversion group (5 cases), intramedullary fixation was favoured

Objective. Failures of internal fixation after intertrochanteric fractures pose great challenge to orthopaedic surgeons. Hip arthroplasty can be a remedy for such failures, however, the selection of femoral stem length is controversial. This study aims to report our experience of managing failed internal fixation after intertrochanteric fractures with standard femoral stem arthroplasty. Methods. A retrospective review of patients who were managed with hip arthroplasty for failed internal fixation after intertrochanteric fractures in the First Affiliated Hospital of Fujian Medical University, P.R. China between January 2001 to December 2013 was performed. Patients’ age, gender, pre- and postoperative Harris Hip Score (HHS), femoral stem types and surgical outcomes were traced and analyzed. Results. 14 patients were included. The average age at the time of internal fixation and hip arthroplasty was 74.6 years old (Range, 56–89) and 75.8 years old (Range, 58–90), respectively. The time duration between internal fixation and hip arthroplasty ranged from 3 to 26 months. 5 were total hip arthroplasty while 9 were hemiarthroplasty. 4 were implanted with long femoral stems while 10 with standard stems, including 4 cementless (SL-PLUS, Smith & Nephew)and 6 cemented stems. Standard femoral stems were defined as ones that are designed to be used in primary hip replacement, with the length of which ranging from 120 to 140mm. The distal ends of these stems did not exceed the distal screw hole levels of 2 cortical diameters. After a mean follow-up time of 6.4 years (Range, 1–13), 2 patients lost to follow-up and 2 died of non-surgically related diseases. For the 8 cases with standard stems, at the latest follow-up, no periprosthetic fractures or periprosthetic joint infections were observed. A total of 3 hip dislocations happened in 2 patients but were managed successfully with manipulative reduction followed by hip brace. The HHS score increased from an average of 35.6 preoperatively to 79.4 after surgery. Conclusions. Hip arthroplasty can be performed as revision for failed internal fixation after intertrochanteric fractures. Use of standard femoral stems is less invasive, reduces expenditure and can also achieve similar satisfactory clinical outcomes as long femoral stems. However, the long-term clinical outcomes required further follow-up

Purpose. To compare the clinical and radiological results between internal fixation using the proximal femoral nail system and bipolar hemiarthroplasty in reverse oblique intertrochanteric hip fracture in elderly patients. Materials and Methods. From January 2005 to July 2012, we reviewed 53 patients who had been treated surgically for reverse oblique intertrochanteric fracture and been followed up on for a minimum of 2 years. The patients, all over 70 years old, were divided into two groups for retrospective evaluation: one group was treated with open reduction and internal fixation using the proximal femoral nail system (31 cases), and the other group was treated with bipolar hemiarthroplasty (22 cases). Results. Early ambulation postoperatively and less pain at postoperative three months were significantly superior in the bipolar hemiarthroplasty group. However, by 24 months postoperatively, the open reduction and internal fixation group had higher Harris scores and correspondingly less pain than the bipolar hemiarthroplasty group. There were no significant differences in union rate, duration of hospitalization or lateral wall fracture healing between the two groups. Four patients in the open reduction and internal fixation group underwent reoperation. Conclusions. In the treatment of intertrochanteric fracture of the reverse oblique type, if the patient's health and bone quality are good, open reduction and internal fixation is considered to be the better choice. However, in cases of severe communition of fracture and poor bone quality along with high risk of early reduction failure, bipolar hemiarthroplasty is an alternative offering advantages in terms of early ambulation, less pain at early stages, and lower risk of reoperation

Patellar fractures account for approximately 1% of all fractures. Open reduction and internal fixation is recommended to restore extensor continuity and articular congruity. However, complications such as nonunion and symptomatic hardware, still exist. Furthermore, there is a risk of re-fracturing of the healed bone during the removal of the implants. Magnesium (Mg), a biodegradable metal, has elastic moduli and compressive yield strength that are comparable to those of natural bone. Our previous study showed that released Mg ions enhanced fracture healing. However, Mg-based implants degrade rapidly after implantation and lead to insufficient mechanical strength to support the fracture. Microarc oxidation (MAO) is a metal surface coating that reduces corrosion. We hypothesized that Mg pins, with or without MAO, would enhance fracture healing radiologically, mechanically, and histologically, while MAO would decrease degradation of Mg pins. Patellar fracture was performed on forty-eight 18-week-old female New Zealand White rabbits according to established protocol. Briefly, the patella is osteotomized transversely and a tunnel (1.1mm) was drilled longitudinally through the two bone fragments. A pin (1 mm, stainless steel, Mg, or MAO-Mg) was inserted into the tunnel. The reduced construct was stabilized with a figure-of-eight band wire (⊘ 0.6 mm stainless steel wire). Cast immobilization was applied for 6 weeks. The rabbits were euthanized at week 8 and 12 post-operation. Microarchitecture and mechanical properties of the repaired patella were analyzed with microCT and tensile testing respectively. Histological sections of the repaired patella were stained. To evaluate the effect of the MAO treatment on degradation rate of Mg pin, the volume of the Mg pins in the patella was measured with microCT. At week 8, both Mg and Mg-MAO showed higher ratio of bone volume to tissue volume (BV/TV) than the control while there was no significant different between Mg and Mg-MAO. At week 12, Control, Mg, and Mg-MAO groups showed enlarged patella when compared to the normal patella. Tissue volume (TV) and bone volume (BV) of the patella in Mg and Mg-MAO were larger than those in the Control group. However, the Control had higher ratio of bone volume to tissue volume (BV/TV), TV density, and BV density than Mg and Mg-MAO. Tensile testing showed that the mechanical properties of the repaired patella (failure load, stiffness, ultimate strength, and energy-to-failure) of Mg and Mg-MAO were higher than that of the control at both week 8 and week 12. Histological analysis showed that there was significant new bone formation in the Mg and Mg-MAO group compared with the Control group at week 8 and 12. The degradation rate of the MAO-coated Mg pins was significantly slower than those without MAO at week 8 but no significant difference was detected at week 12. Mechanical, microarchitectural, and histological assessments showed that Mg pins, with or without MAO, enhanced fracture healing of the repaired patella compared to the Control. MAO treatment enhanced the corrosion resistance of the Mg pins at the early time point