A patient in his thirties developed synovitis with grade 4 chondrolysis and a stiff knee with a fixed flexion deformity between three and six years following PLC and PCL reconstruction using LARS (Ligament Augmentation and Reconstruction System, Corin). There was histologic evidence of foreign body reaction, the knee was painful, swollen and stiff. We did not use any further LARS ligaments for soft tissue reconstructions of the kneein our practice. We commenced a recall programme for all 83 patients patients who underwent a soft tissue knee reconstruction using LARS. Of those contacted, 41 replied (49%) and 16 patients had symptoms (19%) and were investigated further with XRay, MRI and arthroscopy as indicated. We discovered a total of five patients had histologically proven synovitis with foreign body reactions (6%), three of whom had life-changing symptomatic pain, swelling and stiffness with degenerate changes (3.6%). These patients had undergone various reconstructions, including a) PLC only, b) ACL and PCL, c) PCL and PLC and d) ACL, PCL and PLC. A further single case of massive bone cyst formation was noted, following PCL reconstruction using LARS (1.2%)

Objectives

How to position a unicompartmental knee replacement (UKR) remains a matter of debate. We suggest an original technique based on the intra-operative anatomic and dynamic analysis of the operated knee by a navigation system, with a patient-specific reconstruction by the UKR. The goal of the current study was to assess the feasibility of the new technique and its potential pitfalls.

The anterolateral ligament (ALL) is considered as an important stabilizer of the knee joint. This ligament prevents anterolateral subluxation of the proximal tibia on the femur when the knee is flexed and internally rotated. Injury of the ALL was not investigated in patients with knee dislocation. The aim of the current research is to study the prevalence and characteristics of ALL injury in dislocated knees. A retrospective review of charts and radiological images was done for patients who underwent multiligamentous knee reconstruction surgery for knee dislocation in our institution from May 2008 to December 2016. Magnetic resonance imaging (MRI) was used to describe the ALL injury. The association of ALL injury with other variables related to the injury and the patient's background features was examined. Forty-eight patients (49 knees) were included. The mean age of the patients was 32.3 ± 10.6 years. High energy trauma was the mechanism of dislocation in 28 (57.1%) knees. Thirty-one knees (63.3%) were classified as knee dislocation (KD) type IV. Forty-five (91.8%) knees had a complete ALL injury and three (6.1%) knees had incomplete ALL injury. Forty (81.6%) knees had a complete ALL injury at the proximal fibres of the ALL, while 23 (46.9%) knees had complete distal ALL injury. None of the 46 (93.9%) knees with lateral collateral ligament (LCL) injury had normal proximal ALL fibres (p = 0.012). Injury to the distal fibres of the ALL, as well as overall ALL injury, were not associated with any other variables (p >0.05). Moreover, all patients with associated tibial plateau fractures (9, 18.4%) had abnormality of the proximal fibres of the ALL (p = 0.033). High grade ALL injury is highly prevalent among dislocated knees. The outcomes of reconstructing the ALL in multiligamentous knee reconstruction surgery should be investigated in future studies

While surgeon-industry relationships in orthopaedics have a critical role in advancing techniques and patient outcomes, they also present the potential for conflict of interest (COI) and increased risk of bias in surgical education. Consequently, robust processes of disclosure and mitigation of potential COI have been adopted across educational institutions, professional societies, and specialty journals. The past years have seen marked growth in the use of online video-based surgical education platforms that are commonly used by both trainees and practicing surgeons. However, it is unclear to what extent the same COI disclosure and mitigation principles are adhered to on these platforms. Thus, the purpose of the present study was to evaluate the frequency and adequacy of potential COI disclosure on orthopaedic online video-based educational platforms. We retrospectively reviewed videos from a single, publicly-accessible online peer-to-peer orthopaedic educational video platform (VuMedi) that is used as an educational resource by a large number of orthopaedic trainees across North America. The 25 highest-viewed videos were identified for each of 6 subspecialty areas (hip reconstruction, knee reconstruction, shoulder/elbow, foot and ankle, spine and sports). A standardized case report form was developed based on the COI disclosure guidelines of the American Academy of Orthopaedic Surgery (AAOS) and the Journal of Bone and Joint Surgery. Two reviewers watched and assessed each video for presentation of any identifiable commercial products or brand names, disclosure of funding source for video, and presenter's potential conflict of interest. Additionally, presenter disclosures were cross-referenced against commercial relationships reported in the AAOS disclosure database to determine adequacy of disclosure. Any discrepancies between reviewers were resolved by consensus wherever possible, or with adjudication by a third reviewer when necessary. Out of 150 reviewed videos, only 37 (25%) included a disclosure statement of any kind. Sixty-nine (46%) videos involved the presentation of a readily identifiable commercial orthopaedic device, implant or brand. Despite this, only 13 of these (19%) included a disclosure of any kind, and only 8 were considered adequate when compared to the presenter's disclosures in the AAOS database. In contrast, 83% of the presenters of the videos included in this study reported one or more commercial relationships in the AAOS disclosure database. Videos of presentations given at conferences and/or academic meetings had significantly greater rates of disclosure as compared to those that were not (41% vs 14%; p=0.004). Similarly, disclosures associated with conference/meeting presentations had significantly greater rates of adequacy (21% vs 7%; p=0.018). Even so, less than half of the educational videos originating from a conference or meeting included a disclosure of any kind, and only about half of these were deemed adequate. No differences were seen in the rate of disclosures between orthopaedic subspecialties (p=0.791). Online orthopaedic educational videos commonly involve presentation of specific, identifiable commercial products and brands, and the large majority of presenters have existing financial relationships with potential for conflict of interest. Despite this, the overall rate of disclosure of potential conflict of interest in these educational videos is low, and many of these disclosures are incomplete or inadequate. Further work is needed to better understand the impact of this low rate of disclosure on orthopaedic education both in-training and in practice

OSSTEC is a pre-spin-out venture at Imperial College London seeking industry feedback on our orthopaedic implants which maintain bone quality in the long term. Existing orthopaedic implants provide successful treatment for knee osteoarthritis, however, they cause loss of bone quality over time, leading to more dangerous and expensive revision surgeries and high implant failure rates in young patients. OSSTEC tibial implants stimulate healthy bone growth allowing simple primary revision surgery which will provide value for all stakeholders. This could allow existing orthopaedics manufacturers to capture high growth in existing and emerging markets while offering hospitals and surgeons a safer revision treatment for patients and a 35% annual saving on lifetime costs. For patients, our implant technology could mean additional years of quality life by revising patients to a primary TKA before full revision surgery. Our implants use patent-filed additive manufacturing technology to restore a healthy mechanical environment in the proximal tibia; stimulating long term bone growth. Proven benefits of this technology include increased bone formation and osseointegration, shown in an animal model, and restoration of native load transfer, shown in a human cadaveric model. This technology could help capture the large annual growth (24%) currently seen in the cementless knee reconstruction market, worth $1.2B. Furthermore, analysis suggests an additional market of currently untreated younger patients exists, worth £0.8B and growing by 18% annually. Making revision surgery and therefore treatment of younger patients easier would enable access to this market. We aim to offer improved patient treatment via B2B sales of implants to existing orthopaedic manufacturer partners, who would then provide them with instrumentation to hospitals and surgeons. Existing implant materials provide good options for patient treatments, however OSSTEC's porous titanium structures offer unique competitive advantages; combining options for modular design, cementless fixation, initial bone fixation and crucially long term bone maintenance. Speaking to surgeons across global markets shows that many surgeons are keen to pursue bone preserving surgeries and the use of porous implants. Furthermore, there is a growing demand to treat young patients (with 25% growth in patients younger than 65 over the past 10 years) and to use cementless knee treatments, where patient volume has doubled in the past 4 years and is following trends in hip treatments. Our team includes engineers and consultant surgeons who have experience developing multiple orthopaedic implants which have treated over 200,000 patients. To date we have raised £175,000 for the research and development of these implants and we hope to gain insight from industry professionals before further development towards our aim to begin trials for regulatory approval in 2026. OSSTEC implants provide a way to stimulate bone growth after surgery to reduce revision risk. We hope this could allow orthopaedic manufactures to explore high growth markets while meaning surgeons can treat younger patients in a cost effective way and add quality years to patients' lives

Introduction. Although total knee replacement became a widespread procedure for the purpose of knee reconstruction, osteotomies around the knee were regularly performed. Total knee arthroplasty should be performed for advanced arthritis of the knee. With the advent of biplanar open wedge high tibial osteotomy (HTO) combined with locking plate fixation, HTO has been expanded and its surgical outcome has been improved in recent years. However, post-operative joint-line obliquity has been raised as a concern with this procedure, which may affect the outcome especially in the knees with severe varus deformity. Hence the purpose of this study is to analyze the compression and shear stresses in the knee cartilage with joint line obliquity after HTO. Methods. Using a three-dimensional computer aided design software, the digital knee model with soft tissues was developed. The geometrical bone data used in this study were derived from commercially available human bone digital anatomy media (3972 and 3976, Pacific Research Laboratories, Inc., WA, USA). The three-dimensional knee model was transferred to finite element model. Material properties of the soft tissues and bones were derived from previous studies. The loading condition was adjusted to the load during a single-leg stance of the gait cycle, which resulted in an axial compressive load of 1200 N. Two different conditions were subjected to the analysis: normal alignment and joint-line obliquity after HTO. For the normal alignment, a static force of 1200 N was applied along the mechanical axis. For the joint-line obliquity models, a single force of 1200 N was applied rotating force directions in the frontal plane from the normal direction by 2.5º, 5º, 7.5º, and 10º, respectively. Results. The maximum values of the axial stresses in the cartilages for the normal condition showed almost same values in medial and lateral compartments. In the joint-line obliquity models, the maximum axial stress values in the medial compartment did not exhibit substantial change up to the level of 7.5º obliquity, while a rise in maximum stress value was observed for the model with 10º obliquity. The shear stress showed a different tendency. In the joint-line obliquity models, a steep rise of laterally directed shear stress in the medial compartment was observed for models with obliquity of 5º or more. Discussion. The shear stress in the medial cartilage increased to almost twice as high as the normal knee level for the joint- line obliquity model with an inclination of 5º. The maximum shear stress values increased in accordance with the obliquity angle. The elevated stress could be deleterious to the cartilage. In such large amount of correction by tibial osteotomy leads to unfavorable mechanical environment in the knee. For those severe situations, double-level osteotomy, which retains anatomical knee joint line by simultaneous femoral and tibial osteotomies, should be considered to correct the joint-line obliquity

Much is made of the role of good judgment in the reduction of error, although it is undeniable that error has a role in the development of such judgment. Hence retrospectives from those with experience have merit if we can assume they have introspection and insight as well. In this panel discussion we will explore the experience of a group of renowned surgeons in the field of hip and knee reconstruction, and we will seek their wisdom on new techniques and technology, honed over a few decades of exciting discovery and oft-times unexpected disappointment. In addition, as the session title suggests, these revered colleagues will be invited to reflect on those they encountered, in person or otherwise, by happenstance or design, who profoundly influenced their careers and how that influence shaped their lives and the lives of those entrusted to their care. “If I have seen further than others, it is by standing upon the shoulders of giants” Sir Isaac Newton

To evaluate the value of the use of massive prostheses in periprosthetic infections both in one stage and two stages procedures. Between 2008 and 2014, 236 revisions for PJI had been performed in our hospital by the same surgeon. For the most complex cases, we decided to introduce megaprostheses in our practice in 2011. We report a prospective series of 33 infected patients treated between 2011 and the end of 2014, 14 male and 19 female with on average 67.9 years old (38–85) Infection involved TKA in 22 cases (17 TKA revisions, 4 primary TKA), THA in 9 cases (6 revisions, 3 primary THA), a femoral pseudo-arthrosis with posttraumatic gonarthrosis in one case and a septic humeral pseudoarthrosis in one case. We used a total femoral component for two patients: the first one for a hip PJI with extended diaphyseal bone loss and multiples sinus tracks, and the second one for a massive infected knee prosthesis used in a knee reconstruction for liposarcoma. We used one stage procedures in 20 cases (8 hips, 12 knees, 1 shoulder) and two stages in 13 cases (12 knees and 1 hip). Additional technics included 3 massive extensor system allografts, two local flaps. Perioperative hyperbaric treatment was used for 2 patients. The average follow up is 19.8 months (6–48 months). The most frequent complications were wound swelling and delayed healing in 8 cases;). In 3 cases of one stage surgery a complementary debridement was necessary in the three weeks after the surgery with always a good local and infectious evolution. VAC therapy was used in four cases with good results. We report one early postoperative dead. In summary, the use of massive prostheses in PJI is a good option for complex cases. It can be a good alternative to knee arthrodesis. These components must be used preferentially for older patients, in cases of extreme bone loss or extensive osteomyelitis to secure the bone debridement and the quality of the reconstruction. In our series, the one stage procedure is a validated option even by using complementary technics as bone allografts, extensor system allografts or flaps. We believe the two stages surgery is a secondary option, particularly when soft tissues status is compromised before or after the debridement, and mostly for the knees. The longevity of the implantation must be evaluate by a long term follow up

Full-thickness burns around the knee can involve the extensor mechanism. The gastrocnemius flap is well described for soft tissue reconstruction around the knee. We describe a method where a Whichita Fusion Nail¯ knee arthrodesis, combined with a medial gastrocnemius muscle flap was used to salvage the knee and preserve the lower leg following a full-thickness contact burn. The gastrocnemius flap for wound coverage of an open knee joint was originally described in 1970 and remains the workhorse for soft tissue knee reconstruction. There are a number of local alternatives including the vastus lateralis, medialis and sartorius flap; and perforator flaps such as the medial sural artery perforator island flap and islanded posterior calf perforator flap, however many of these are unsuitable for larger defects. Full-thickness burns around the knee can put the extensor mechanism at risk and subsequent rupture is a possible consequence. The gastrocnemius flap has been used to cover a medial knee defect with exposed joint cavity following a burn and also been used in post burn contracture release around the knee. The primary indication for Wichita fusion nail is a failed total knee replacement. It allows intramedullary stabilization with compression at the arthrodesis site to stimulate bone union. With fusion rates reported up to 100% and low complication rates as compared to other methods of fusion, the technique has a useful role in limb salvage type procedures. While use of the gastrocnemius flap in knee burns has been described before we believe this is the first time that this combination of techniques, namely knee arthrodesis with soft tissue reconstruction using a gastrocnemius flap, has been reported. Combining these procedures with a multidisciplinary approach provides a useful alternative leading to limb salvage and avoiding the need for an above knee amputation when extensor reconstruction is not possible

INTRODUCTION:. Despite clear clinical advantages Unicompartimetal Knee Replacement still remain an high demanding and less forgiving surgical procedure. Different Authors in literature pointed out how malalignment increases the rate of aseptic failure even more than in TKR. Computer-assisted surgery has been proposed to improve implant positioning in joint replacement surgery with no need of intramedullary guide despite no still proven clinical advantages. Likewise more recently Patient Specific Instrumentation (PSI) has been suggested, even in partial knee reconstruction, as a new technology capable of new advantages such as shorter surgical times and lower blood losses maintaining at least the same accuracy. Aim of the study is to present a prospective study comparing 2 groups of UKR s using either a computer assisted technique or a CT-based Patient Specific Instrumentation. MATERIALS AND METHODS:. Since January 2010, 54 patients undergoing UKR because medial compartment arthritis were enrolled in the study prospectively. Before surgery patients were alternatively assigned to either computer-assisted alignment (group A) or patient specific instrumentation group (group B). In the group A (27 knees) the implant (Sigma, Depuy Orthopaedics Inc, Warsaw, Indiana, USA) was positioned using a CT-free computer assisted alignment system specifically created for UKR surgery (OrthoKey, Delaware, USA). In group B (27 knees) the implant (GMK Uni, Medacta, Castel San Pietro, Switzerland) was performed using a CT-based PSI technology (MyKnee, Medacta, Castel San Pietro, Switzerland). In both the groups all the implants were cemented and using always a fixed metal backed tibial component. The surgical time and complications were documented in all cases. Six months post-operatively the patients underwent to the same radiological investigation to determine the frontal femoral component angle (FFC), the frontal tibial component angle (FTC), the hip-knee-ankle angle (HKA) and the sagittal orientation (slope) of tibial/femoral components. The number and percentage of outliners for each parameter was determined. In addition the percentage of patients in each group with all 5 parameters within the desired range was calculated. Furthermore the 2 groups were clinically assessed using KSS and Functional score. RESULTS:. There were no differences in the clinical outcome. The mean surgical time was longer in the navigated group of a mean of 5.9 minutes without any statistical differences in complications. The mechanical axes, tibial slope the FTC angle were significantly better aligned in the navigated group. A statistically significant higher number of outliners was seen in the PSI group. The number of implants with all 5 radiological parameters aligned within the desired range was statistically higher in the navigated group. All the implants in the navigated group were correctly aligned in all the planned parameters. Discussion:. To our knowledge this is the first prospective study in literature assessing navigation compared to PSI technique in UKR surgery. Despite a slight not significant longer surgical time in the navigated group, at a short follow-up the results could not demonstrate any clinical differences between the 2 technologies However according to their results the Authors indicate navigation as more helpful in UKR surgery compared to PSI technology in terms of accuracy