We present the clinical and radiological outcome of a prospective series of 22 Buechel-Pappas Total Ankle Replacements (TAR) implanted in 19 patients with a mean follow-up of 9 years (range 6 to 13). The only published long term results of this prosthesis in the literature are from the originators' unit.

Patients have been prospectively reviewed yearly since 1991. None was lost to follow-up. The primary diagnosis was rheumatoid arthritis in 11 and osteoarthritis in 8 patients. 12 patients were female. Mean patient age was 64 (range 39 to 81). At the time of review 4 patients (6 ankles) had died between 12 and 69 months post-operatively of unrelated causes with their prostheses in situ. One patient had a below knee amputation for chronic venous ulceration 11 years after a TAR which until that point had continued to function well. One patient with severe rheumatoid arthritis had the implant removed at 8 weeks for deep infection. Another patient with rheumatoid arthritis had the TAR revised to a tibio-talar-calcaneal fusion 59 months post-operatively for talar avascular necrosis. One patient has pain from impingement and another patient with rheumatoid arthritis has intermittent pain at 8 years following her TAR. Every other implant continues to function well. The New Jersey LCS ankle assessment scores increased from a mean of 35 pre-operatively to 82 post-operatively. The increases were largely due to pain relief and improved function with the pre-operative range of motion being preserved. These scores have been maintained in the long term. No surviving implant is radiologically loose.

Our results suggest that the Buechel-Pappas TAR offers good clinical and radiological long-term results to patients with often disabling ankle arthritis

Primary total hip arthroplasty in patients with osteoarthrosis secondary to developmental hip dysplasia is often more complex due to anterolateral acetabular bone deficiency. Femoral head (shelf) autograft provides a non-immunogenic, osteoconductive lateral support with the potential for enhanced bone stock should revision surgery be required. The technique has been shown in other series to give reliable early results but may be complicated by graft revascularisation and collapse. As yet, no study has assessed shelf grafts long term or quantified the need for further bone graft at revision surgery.

This study aims to assess initial graft union rate; quantify long term graft resorption and; quantify the need for further bone graft in the patients requiring revision surgery.

A retrospective analysis of a single surgeon's series of 31 THR in 25 patients was conducted. Post-operative, biplanar radiographic analysis was performed at 3 and 6 months and annually thereafter for a mean of 14 years (range 8-18). Grafts were assessed for union, resorption and displacement. Intra-operative necessity for bone graft at revision surgery was recorded.

Union, osseous 93%, fibrous 7%. No grafts displaced. In 71% less than one-third of the graft resorbed, in 29% one-third to one-half resorbed and in no grafts did greater than a half resorb. Of 10 patients revised, 2 required bone graft for inadequate bone stock.

Femoral head autograft allows effective acetabular coverage with excellent rates of union, minimal graft resorption in the long term and improves bone stock in revision surgery.

Introduction

Young, high-demand patients with large post-traumatic tibial osteochondral defects are difficult to treat. Fresh osteochondral allografting is a joint-preserving treatment option that is well-established for such defects. Our objectives were to investigate the long-term graft survivorships, functional outcomes and associated complications for this technique.

The modern generation of hip resurfacing arthroplasties was developed in the early 1990's with one of the original designs being the McMinn Resurfacing Total Hip System. This was a hybrid metal on metal prosthesis, with a smooth hydroxyapetite coated press fit mono block cobalt chrome shell with a cemented femoral component. Although no longer produced in this form, lessons may be learned from this original series of components. With metal on metal resurfacing arthroplasty now facing criticisms and concerns with regard function, bone preservation capability and soft tissue issues such as ‘pseudotumors’, it is the aim of this long-term study to assess the outcome and survival of an original series of resurfacing arthroplasties.

27 resurfacing arthroplasties were performed in 25 consecutive patients between June 1994 and November 1996. 16 right hips and 11 left were performed in 14 female patients and 11 male patients. The average age at the time of surgery was 50.5 years (SD 7.9, range 30-63). All surgeries were performed by a single surgeon using a posterior lateral approach. Following the initial early care, each patient received bi-annual follow up along with open access to the clinic with any concerns or complications. A retrospective review of the case notes was conducted and outcome scores retrieved from a prospectively updated database. Radiographs were analyzed and a Kaplan Meier survival chart was constructed for the group.

At latest review 3 patients have died (5yrs, 8yrs and 13.8yrs) and 1 patient has been lost to follow up (5yrs). 7 resurfacings have required revision, all due to acetabular loosening, at a mean follow up of 7 years 11months (SD 2.03years, range 4-10). Metallosis was documented in 4 of the revision cases, however no extensive soft tissue inflammation or ‘pseudotumor’ identified. The mean follow up of the remaining 16 hips is 12years and 10months (SD 12.8months, Range 10.4yrs-14.0 years). The Kaplan Meier survival at a minimum follow up of 10 years is 75.8% (95% CI 0.67-0.95). Mean Oxford hip scores at latest follow up was 20.6 (SD 8.8, range 12-38). There was no significant difference between cup inclination angles for the surviving cohort and those who required a revision procedure with mean cup inclinations of 52.5 (SD 5.5, range 45-60) and 58 degrees respectively (SD 9.1, range 50-70)(p=0.255).

This original series of hip resurfacings, with up to 14 years follow up, shows a survival of 76% at the minimum follow up of 10 years. All failures were due to loosening of the smooth backed acetabulum, which with a modern porous coating, failure may have been avoided or delayed. Despite high inclinations angles no soft tissue reactions were identified within this series. No femoral failures were identified suggesting unlike much literature focus, long-term failure may not be related to the femoral head or neck.

Objective

To assess the long term functional and objective outcomes for 2 stage Dupuytrens contracture correction.

Fracture related infection, in particular chronic osteomyelitis, requires complex management plans. Meta analyses and systematic reviews have not found a gold standard of treatment for this disease. In 2017 an alternative treatment protocol was undertaken in our institution; whereby staged surgery with the use of cheaply manufactured tailored antibiotic cement rods was used in the treatment of chronic osteomyelitis, secondary to traumatic long bone fractures. Short term outcomes for this protocol demonstrated a 75.7% microbiological resolution to a negative culture and a good clinical outcome of 84.2% overall was demonstrated in terms of sinus resolution, skin changes, pain and function. Our aim now was to assess the long term outcomes of this treatment strategy. A cross-sectional study of patients who had previously undergone the set treatment protocol was performed. Patient satisfaction, effects on activities of daily living, return to work and clinical improvement at 5 years following the intervention were assessed using a patient questionnaire and the validated AAOS lower limb score. The average AAOS lower limb score was 88 which was en par to other similar studies. 80% of patients had returned to some form of work. Ongoing mild pain was a persistent problem for 50% of the patients however 98% of the patients were overall satisfied with the treatment satisfaction at 5 years. Only 1 patient required further treatment. 8 patients could not be located for follow up. Chronic osteomyelitis remains a complex disease to treat. This treatment protocol demonstrates favourable microbiological, serological and clinical short term outcomes and favourable patient satisfaction and functional long term outcomes at 5 years. Our study highlights antibiotic targeted cement rods as a feasible treatment option in managing chronic osteomyelitis

Introduction. Magnetic resonance imaging with intraarticular contrast (arthro-MRI) and radial cuts is the gold standard to quantify labral and chondral lesions in the setting of femoroacetabular impingement. To date, no study exists that has evaluated these findings as potential predictors of outcome for the long term follow-up after surgical treatment of FAI. Objectives. The purpose of this study was to detect potential predictors for failure after surgical hip dislocation for FAI based on specific preoperative arthro-MRI of the hip at a minimum follow-up of 10 years. Methods. Retrospective case series of 97 hips (75 patients) undergoing surgical hip dislocation for FAI between July 2001 and March 2003. Minimum follow-up was 10 years. Twelve radiographic factors were preoperatively evaluated on specific arthro-MRIs with radial cuts of the hips. Patients were then evaluated clinically and radiographically at latest follow-up (mean followup of 11 years, range 10–13 years). The following endpoints were chosen: conversion to total hip arthroplasty (THA), radiographic evidence of progression of osteoarthritis (OA), and/or a Merle d'Aubigné-Postel score of less than 15 indicating a poor clinical result. Univariate and multivariate Cox-regression analysis were performed with these endpoints as failures. Results. Hips with failure at 10-year follow up after surgical hip dislocation where more likely to show typical signs like decentration of the femoral head (52.9% compared to 17% in hips with good long term outcome; p = 0.007) in preoperative arthro-MRI evaluation. The strongest arthro-MRI based predictors of failure at the 10 year follow-up were a ‘double fond’ (hazard ratio with 95% confidence interval, 3.4 [3.2–3.7], p = 0.001), decentration of the femoral head (3.0 [2.8–3.3], p = 0.004) and posterior-inferior femoral osteophytes (3.3 [3.1–3.6], p = 0.002). Conclusions. Factors like double fond, decentration of the femoral head and postero-inferior femoral osteophytes in preoperative arthro-MRI predict inferior long term outcome after surgical hip dislocation for FAI. Therefore we recommend preoperative evaluation with arthro-MRI in addition to conventional radiography

Contracture of the anterior musculature causes posterior humeral head subluxation and results in a posterior load concentration on the glenoid. This reduced contact area causes glenoid wear, humeral medialisation and eventually posterior instability. After arthroplasty that does not correct for this, posterior wear stress increases in the implant, across the cement mantle and bone thus increasing the risk of aseptic loosening over time. Correction of the posterior wear pattern at the time of arthroplasty of the shoulder is recommended. Asymmetric reaming of the glenoid has been recommended as a means to correct this deformity but leads to producing a smaller glenoid which is medialised. This shortening of the glenoid causes the stabilising muscle envelope to shorten and the glenoid vault to become much smaller in volume. These potential changes may have a destabilising effect on the implant leading to early loosening and secondary failure of the prosthetic implant. Other options include using an implant to make the correction of the deformity such as augmented glenoid components. Early uses of these implants were not successful mainly due to the design flaws of the early implants. Newer implants have made design changes to overcome these early failures. CT scan evaluation is important to determine the degree of correction that is needed to balance the glenohumeral joint. Correcting the deformity and keeping the muscle envelope at the appropriate tension may lead to better long term outcomes. These implants are currently in use but long term outcome studies are not yet available to determine their ultimate values to the patients

Aim. In recent years, the number of victims of road traffic accidents (RTAs) and resulting surgeries have been on the rise in low income countries. Treatments are often long and costly; resources required to treat fracture related infections (FRI) continue to be a limiting factor in low income countries and standardized management protocols are lacking. This retrospective study reports our facility's experience of femoral FRI management in a low income country and evaluates the surgical outcomes with a minimum follow up of five years. Methods. The clinical and radiographic records of patients who underwent surgery for femoral FRI in our facility between 2005–2016 were analyzed. Twenty-six patients were included (15 males), with a median age of 29 years (range 4–71). The initial fracture was caused by RTA in 22 patients, gunshot in 2, accidental fall in 1 and acute osteomyelitis in 1. Polytrauma was observed in 10. All patients but one were referred for limb reconstruction from other institutions. Surgical treatment was instituted in all: site debridement (SD) alone was performed in 2 patients; SD and hardware removal in 4; SD and external fixation in 4; SD, hardware removal and external fixation in 16. In this latter group, complex treatments such as bone transport (BT) and vascularized fibula flap (VFF) were utilized in 4 and 3 patients respectively. Results. The mean follow-up was 8.4 years. Bone union was achieved in all cases with eradication of the infection in all but one. A total of 109 surgeries were carried out with an average of 4 surgeries per patient (range 1–13). The external fixation stayed in place for an average of 9.2 months (range 3–20). Complications were common at the last follow-up: limb length discrepancy (LLD) was observed in 18 patients; stiff knee was noted in 16; stiffness of ipsilateral knee and hip in 3; stiff hip in 1 and fused knee in 3. All patients ambulated without assistive devices. Conclusions. The treatment of femoral FRI is complex, long and often requires the combined effort of the orthopedic and plastic surgical teams. Despite limited resources, our institution achieved good long term surgical outcomes through a variety of methods. Further studies are required across multiple sites to better outline optimal management of femoral FRI in low income countries

Introduction. Legg-Calve-Perthes disease (LCPD), a juvenile osteonecrosis of the femoral head (ONFH), can remain sequelae around hip joint, and results in osteoarthritis necessitating total hip arthroplasty (THA) in middle-age. THA for sequelae of LCPD needs specific concerns for anatomical deformity, leg length discrepancy (LLD), and relatively young patient's age. To date, few studies are available for the results of THA for LCPD sequelae. Moreover, there was no study for the result of Alumina-Alumina THA (Al-Al THA) in patient with LCPD sequelae, even excellent long term outcome of Al-Al THA has been documented in relatively young patients. The aim of this retrospective study is to evaluate the clinical and radiological outcome of Al-Al THA for LCPD sequelae, especially in terms of the restoration of LLD and the occurrence of complication. In addition, we compared the results of THA for LCPD sequelae with those for adult onset ONFH, in which THA is necessitated in relatively young age and excellent long term outcome has been proven after Al-Al THA. Method. Between 1997 and 2007, 41 cementless Al-Al THA were performed in 37 patients with LCPD sequelae and followed up for mean, 10.4 years. Mean age at THA was 43.6 years. Using the propensity score matching with age, gender, and the length of follow-up as variables, 41 THAs in 37 patients were identified from 339 hips in 256 patients who underwent primary Al-Al THA for ONFH during the same period. Clinical and radiological outcomes in terms of implant survival, Harris hip score (HHS), LLD change, and perioperative complication were compared between the two groups. Results. In LCPD group, there was no revision during follow-up period. All stems and cups were survived without osteolysis or loosening at last follow-up. HHS increased significantly from 70.9±12.9 point to 97.4±5.4 point (p<0.001). LLD decreased significantly from 2.0±1.2 cm to 0.2±0.9 cm. (p<0.001). Fourteen intraoperative femoral cracks occurred. One patient showed peroneal nerve palsy after surgery. There was one patient with deep vein thrombosis without pulmonary embolism. In ONFH group, there was also no revision during follow-up and all implant was radiologically stable without evidence of osteolysis or loosening. HHS increased significantly from 44.9±21.4 point to 96.6±4.6 point (p<0.001). LLD decreased significantly from 0.5±0.8 cm to 0.1±0.9 cm. There were 6 intraoperative femoral fractures. Also, there was 2 more postoperative periprosthetic fractures after trauma and 1 postoperative dislocation. Even the implant survival was not different between two groups, LCPD group showed higher rate of overall complication (p=0.04) and intraoperative femoral fracture (p=0.027) than ONFH group. Conclusion. Outcomes of Al-Al THA in patients with sequelae of LCPD were comparable to those in patients with ONFH clinically and radiologically. LLD was restored after THA without troublesome neurologic complication in both groups. Although high rate of intraoperative femoral crack was revealed in LCPD group, fracture union was achieved in all hips without stem loosening. As with ONFH, Al-Al THA may be a reliable treatment option for the patients with LCPD sequelae

Spinal tuberculosis is one of the most common presentations of skeletal tuberculosis. It is one of the major health issues of developing countries as it is associated with significant morbidity and mortality. Pott's paraplegia is a dreaded complication which can result in permanent neurological deficit, unless treated by timely intervention. We evaluated the efficacy of transpedicular decompression and functional recovery in patients of spinal tuberculosis with neurological deficit. A cohort of 23 patients (15 males and 8 female) with diagnosed spinal tuberculosis and having an average age of 37.5±8.4 years, satisfying our inclusion and exclusion criteria's and giving written informed consent were recruited in our study. All patients were managed by transpedicular decompression and fusion with posterior instrumentation. All the patients were followed up clinically, radiologically and hematologically. Patients were followed up at every six weeks for 4 months and thereafter at three monthly intervals to assess the long term outcomes and complications. Neurological evaluation was done by Frankel grading. Functional outcome was assessed by Visual Analog Score (VAS) and Owestry Disability Index score (ODI score). All the patients were followed for a minimum of 27 months. At the final follow-up, there was a statistically significant improvement in VAS score and ODI score. Out of 23 patients, all except three patients showed neurological recovery. We observed that transpedicular decompression is safe and effective approach for management of spinal tuberculosis as it allows adequate decompression of spinal cord while pedicular instrumentation provides stable spinal fixation and helps in early rehabilitation

Although the incidence of total hip dislocation has decreased, it still remains a major problem particularly if recurrent. The actual incidence is around 1–2% but it has been documented as the leading cause for hip revision in the United States. In patients with recurrent hip dislocation, technical issues of leg length inequality, incorrect offset, and poor implant position should be addressed surgically and the abnormality corrected. In patients with recurrent hip dislocation, the articulation is preferably converted to a more stable articulation, with constrained sockets and dual mobility being the choices. In my experience, dual mobility articulations remain an excellent option for recurrent hip dislocation and its use is increasing significantly. It provides improved hip stability and data have demonstrated good success with recurrent hip dislocation. However, with use of the modular variety of dual mobility which is needed for acetabular cup fixation with screw augmentation, dissimilar metals are placed in contact (titanium socket and cobalt chrome liner insert) which potentially can pose a fretting or corrosion problem in longer term outcomes. Constrained sockets of the tripolar configuration provide another option which is useful in those patients with severe abductor dysfunction or insufficiency. Constrained sockets can also be cemented into the existing shell in cases where there is a well-fixed cup and cup removal may lead to significant bone loss and a need for complex acetabular reconstruction. It is important to remember that there are two types of constrained sockets, tripolar and focal constraint. Results with the tripolar constrained socket have been significantly better than the focal constraint variety which adds a polyethylene rim piece to the liner. In a mid-term follow up (2–9 years) of 116 constrained tripolar sockets, recurrent dislocation was only 3.3%. In papers reporting on focal constrained sockets, recurrent dislocation was in the 9–29% range. There continues to be a role for constrained sockets and selection of implant type has made a difference in ultimate outcome

In the young and highly active population of military patients, femoroacetabular impingement can be a source of serious disability as well as a threat to their career. This morbidity can be treated with hip arthroscopy with debridement of cam lesion, and excision or repair of a corresponding labral tear. We report on the long term outcomes (>1 year) of 26 military cases who underwent hip arthroscopy for femoroacetabular impingement, in a single surgeon's series. Twenty two patients (four bilateral cases) underwent hip arthroscopy as a day case procedure during the period February 2013 to October 2014. Non-Arthritic Hip Scores (NAHS) were obtained from patients pre-operatively, at two months, four months and at least one year post-operatively. There was a significant improvement in NAHS at two months (75.6)(p<0.05), four months (85.1)(p<0.001) and one year (84.8)(p<0.001), compared to pre-operative NAHS (65.8). There was no significant change in NAHS beyond four months. Only three out of the 22 patients were medically discharged secondary to persistent hip symptoms. Hip arthroscopy for femoroacetabular impingement is an effective, viable procedure for military patients. Mobility, pain and function is significantly improved after surgery. This improvement is sustained in the long term up to and beyond one year

All skeletally immature patients who presented with a supracondylar fracture between 01/09/2013 and 24/11/2015 (n = 50) were used to compare the current management of supra-condylar fractures of the humerus in children to the standards set by the BOAST 11 guidelines. 8.1% did not have full documentation of their neurovascular assessment. 93.9% underwent surgery within 24 hours of presentation. Average time to theatre for neurovascularly compromised patients was 4 hours 46 minutes. 81.8% were managed with 2 K-wires as recommended. Only 39.4% of the patients had their wires removed within 3 – 4 weeks. Only 6.1% had the recommended 2 mm wires. AO recommends the use of 2mm wires if 2 lateral wires are used whereas the BOAST 11 guideline recommends 2mm wires where possible. The results clearly demonstrate a need for further education and awareness of the BOAST 11 guidelines. Of particular interest is the documentation of patients' neurovascular status for appropriate management and for medico-legal purposes. Long term outcome comparison of surgical fixation with 2mm and 1.6mm wires would be useful to support the use of 2mm wires as recommended by the professional consensus in the BOAST 11 guidelines

Severe glenoid bone loss in patients with osteoarthritis with intact rotator cuff is associated with posterior glenoid bone loss and posterior humeral subluxation. Management of severe glenoid bone loss during shoulder arthroplasty is controversial and technically challenging and options range from humeral hemiarthroplasty, anatomic shoulder replacement with glenoid bone grafting or augmented glenoid component implantation, to reverse replacement with reaming to correct version or structural bone grafting or metallic augmentation of the bone deficiency. Shoulder replacement with severe glenoid bone loss is technically challenging and characterised by higher rates of complications and revisions. Hemiarthroplasty has limited benefit for pain relief and function especially if eccentric glenoid wear exists. Bone loss with >15 degrees of retroversion likely requires version correction include bone-grafting, augmented glenoid components, or reverse total shoulder replacement. Asymmetric reaming may improve version but is limited to 15 degrees of version correction in order to preserve subchondral bone and glenoid bone vault depth. Bone-grafting of glenoid wear and defects has had mixed results with graft-related complications, periprosthetic radiolucent lines, and glenoid component failure of fixation. Implantation of an augmented wedge or step polyethylene glenoid component improves joint version while preserving subchondral bone, but is technically demanding and with minimal short term clinical follow-up. A Mayo study demonstrated roughly 50% of patients with posteriorly augmented polyethylene had radiolucent lines and 1/3 had posterior subluxation. Another wedge polyethylene design had 66% with bone ingrowth around polyethylene fins at 3 years. Long term outcomes are unknown for these new wedge augmented glenoid components. Reverse shoulder arthroplasty avoids many risks of anatomic replacement glenoid component fixation and stability but is associated with a high complication rate (15%) including neurologic and baseplate loosening and often requires structural bone grafting behind the baseplate with suboptimal outcomes or metallic augmented baseplates with limited evidence and short term outcomes. Reverse replacement with baseplate bone grafting or metal augmentation is technically challenging due to limited native glenoid bone stock available for baseplate component ingrowth and long term fixation. Failure to correct glenoid superior inclination and restore neutral version within 10 degrees increases the risks of reverse baseplate failure of fixation, pull out, and failure of reverse replacement. Reverse baseplate failure rates in patients with severe glenoid bone loss and concomitant glenoid bone grafting range from 5–11%. The minimum native glenoid bony contact with the baseplate is unknown but likely is approximately 1cm of native bone contacting a central ingrowth post and a minority (∼15–25%) of native glenoid contacting the backside of the baseplate. Failure to correct posterior bone loss can lead to retroversion of the baseplate, reduced external rotation, posterior scapular notching, and posteromedial polyethylene wear. In summary, shoulder replacement with severe glenoid bone loss is technically challenging and characterised by higher rates of complication and revision

Although the incidence of total hip dislocation has decreased, it still remains a major problem particularly if recurrent. The actual incidence is around 1–2% but it has been documented as the leading cause for hip revision in the United States. In patients with recurrent hip dislocation, technical issues of leg length inequality, incorrect offset, and poor implant position should be addressed surgically and the abnormality corrected. In patients with recurrent hip dislocation, the articulation is preferably converted to a more stable articulation, with constrained sockets and dual mobility being the choices. In my experience, dual mobility articulations remain an excellent option for recurrent hip dislocation and its use is increasing significantly. It provides improved hip stability and data have demonstrated good success with recurrent hip dislocation. However, with use of the modular variety of dual mobility which is needed for acetabular cup fixation with screw augmentation, dissimilar metals are placed in contact (titanium socket and cobalt chrome liner insert) which potentially can pose a fretting or corrosion problem in longer term outcomes. Constrained sockets of the tripolar configuration provide another option which is useful in those patients with severe abductor dysfunction or insufficiency. Constrained sockets can also be cemented into the existing shell in cases where there is a well-fixed cup and cup removal may lead to significant bone loss and need for complex acetabular reconstruction. It is important to remember that there are two types of constrained sockets, tripolar and focal constraint. Results with the tripolar constrained socket have been significantly better than the focal constraint variety which adds a polyethylene rim piece to the liner. In a mid-term follow up (2–9 years) of 116 constrained tripolar sockets, recurrent dislocation was only 3.3%. In papers reporting on focal constrained sockets, recurrent dislocation was in the 9–29% range. There continues to be a role for constrained sockets and selection of implant type has made a difference in ultimate outcome

The advent of modern anatomic shoulder arthroplasty occurred in the 1990's with the revelation that the humeral head dimensions had a fixed ratio between the head diameter and height. As surgeons moved from the concept of balancing soft tissue tension by using variable neck lengths for a given humeral head diameter, a flawed concept based on lower extremity reconstruction, improvements in range of motion and function were immediately observed. Long term outcome has validated this guiding principle for anatomic shoulder replacement with improved longevity of implants, improved patient and surgeon expectations and satisfaction with results. Once the ideal humeral head prosthesis is identified, and its position prepared, the surgeon must use a method to fix the position of the head that is correct in three dimensions and has the security to withstand patient activities and provide maximal longevity. Based again on lower extremity concepts, long stems were the standard of care, initially with cement, and now, almost universally without cement for a primary shoulder replacement. The incredibly low revision rates for humeral stem aseptic loosening shifted much of the attempted innovation to the challenges on the glenoid side of the reconstruction. However, glenoid problems including revision surgery, infections, periprosthetic fractures, and other complications often required the removal of the humeral stem. And, in many cases, the overall results of the procedure and the patient's long-term outcome was affected by the difficulty in removing the stem, leading surgeons to compromise the revision procedure, avoid revision surgery, or add to the overall morbidity with humeral fractures and substantial bone loss. With improved technology, including bone ingrowth methods, better matching of the proximal stem geometry to the humerus, and an understanding that the center of rotation (torque) on the humeral component is at the level of the humeral osteotomy, shorter stems and stemless humeral components were developed, now more than 10 years ago, primarily in Europe. With more than a decade of experience, our European colleagues have shown us that stemless humeral component replacement with a device that has both cortical and cancellous fixation is as effective as a stemmed device, easier to implant as well as revise when needed. The short-term results of the cancellous fixation stemless devices are acceptable, but longer follow-up is needed. Currently, the most widely used humeral components in the USA are short stem components, although the recent FDA approval of numerous stemless devices has initiated a shift from short stems to stemless devices. The truth is, short stem devices have a firm position in the USA surgeons' armamentarium today due to regulatory restrictions. A decade ago, without a predicate on the market, it was not conceivable that a stemless device that was already gaining popularity in Europe would be able to get 510K approval, and therefore would require a lengthy and expensive FDA IDE process. However, shorter stems had already been approved in the USA, as long as the stem length was 7 centimeters, matching the market predicate. Now, in 2018, based on evidence and outcomes, stemless humeral components should be the first choice when treating primary osteoarthritis of the glenohumeral joint. Short stem or longer stem devices should be reserved for those cases where stemless fixation is not possible, which is less than 10% of patients with primary OA of the shoulder

Introduction. Osteosynthesis to conserve femoral head following neck of femur (NOF) fractures has reported failure rates of 36 to 47% at 2 years. However, the long-term outcomes of THAs performed for failed osteosynthesis is yet to be elucidated. This study aims to report on long term outcome of primary THAs post failed osteosynthesis for NOF fracture. Methods. Consecutive patients with THA for failed NOF osteosynthesis managed by a single unit between January 1974 and December 2009 were included. Clinical and radiological outcomes of all 72 patients were analysed. Patients with minimum follow-up of 5 years were included. Those with less than 5 years of follow-up were reviewed for failures. Results. Mean age at the time of THA was 56. (range − 18–79). Mean follow-up was 12.9 years (range − 5 to 35.5). All patients had cemented THA. The major late complications included stem loosening in 4, stem fracture - 1, cup loosening - 7, deep infection − 3 and dislocations in 4. Thirteen (18.1%) patients had revisions. Cumulative survival rate is 80.3% (CI: 91.6–69.1) at 10 years. Conclusion. The outcomes for patients with THA for failed osteosynthesis post NOF fracture is worse in comparison with reported revision rates of THA for acute NOF fracture. The risks of poorer outcomes following salvage THA and morbidity of failed osteosynthesis need to be factored in for NOF fracture management

Alignment and soft tissue balance are two of the most important factors that influence early and long term outcome of total knee arthroplasty. Current clinical practice involves the use of plain radiographs for preoperative planning and conventional instrumentation for intra operative alignment. The aim of this study is to assess the Signature. TM. Personalised system using patient specific guides developed from MRI. The Signature. TM. system is used with the Vanguard. R. Complete Knee System. This system is compared with conventional instrumentation and computer assisted navigation with the Vanguard system. Patients were randomised into 3 groups of 50 to either Conventional Instumented Knee, Computer Navigation Assisted Knee Arthroplasty or Signature Personalised Knee Arthoplasty. All patients had the Vanguard Total knee Arthroplasty Implanted. All patients underwent Long leg X-rays and CT Scans to measure Alignment at pre-op and 6 months post-op. All patients had clinical review and the Knee Society Score (KSS) at 1 year post surgery was used to measure the outcome. A complete dataset was obtained for 124 patients. There were significant differences in alignment on Long leg films ot of CT scan with perth protocol. Notably the Signature group had the smallest spread of outliers. In conclusion the Signature knee system compares well in comparison with traditional instrumentation and CAS Total Knee Arthroplasty

To assess long and short term kinematic gait outcomes after rectus femoris transfers (RFT) in ambulatory children with cerebral palsy (CP). A retrospective review was conducted of ambulatory children with spastic diplegic CP, who had RFT plus motion analysis preoperatively and 1 year post-operatively. Those with 5 and 10 year post-operative motion analysis were also included. The primary variables were: peak knee flexion range of motion in swing (PKFSW), timing of peak knee flexion in swing as a percent of the gait cycle (PKF%GC), and knee range of motion from peak to terminal swing (KROM). Responders and non-responders were identified. Descriptive, kinematic and kinetic variables were evaluated as predictors of response. 119 ambulatory children (237 limbs) with spastic diplegic CP who had RFT were included. Mean age at surgery was 10.2 years (range 5.5 to 17.5). Sixty-seven participants were classified at GMFCS Level II and 52 at GMFCS Level III. All participants (237 limbs) had a preoperative and 1 year postoperative motion analysis. Motion analysis at 5 and 10 years post-operatively included 82 limbs and 28 limbs, respectively. Ninety-three (39%) limbs improved in both PKFSW and PKF%GC. PKFSW improved in 59% of limbs. Responders started 1.2 SD below the mean PKFSW preoperatively, and improved by an average of 1.9 SD to reach a normal range at 1 year post-operatively (p < 0.05). Improvement was maintained at 5 and 10 years postoperatively. Those at GMFCS level II were more likely [OR 1.71, CI 1.02, 2.89] to have improved PKFSW at 1 year postoperatively than those at GMFCS level III. PKF%GC improved in 70% of limbs. Responders had delayed PKF%GC, starting 10 SD above the mean (later in the gait cycle) preoperatively. Their timing improved towards normal values: 5 SD, 5.9 SD, 3.5 SD from the mean, (earlier in the gait cycle) at 1, 5 and 10 years postoperatively, respectively (p<0.05). KROM improved in only 24% of limbs. For all variables, there was a significant difference in mean preoperative values between responders and non-responders (p<0.05). RFT improves short and long-term kinematic gait outcomes. The majority of children responded to RFT with improvements in PKFSW or PKF%GC at 1, 5, and 10 years post RFT. GMFCS level is a predictor of improved PKFSW, with children at GMFCS Level II having an increased likelihood of improvement at 1 year post surgery. Children who have worse preoperative values of PKFSW, PKF%GC, and KROM have a greater potential for benefit from RFT. Characteristics associated with responders who maintain long term positive outcomes need to be identified