As arthroplasty demand grows worldwide, the need for a novel cost-effective treatment option for articular cartilage (AC) defects tailored to individual patients has never been greater. 3D bioprinting can deposit patient cells and other biomaterials in user-defined patterns to build tissue constructs from the “bottom-up,” potentially offering a new treatment for AC defects. Novel composite bioinks were created by mixing different ratios of methacrylated alginate (AlgMA) with methacrylated gelatin (GelMA) and collagen. Chondrocytes and mesenchymal stem cells (MSCs) were then encapsulated in the bioinks and 3D bioprinted using a custom-built extrusion bioprinter. UV and double-ionic (BaCl2 and CaCl2) crosslinking was deployed following bioprinting to strengthen bioink stability in culture. Chondrocyte and MSC spheroids were also bioprinted to accelerate cell growth and development of ECM in bioprinted constructs. Excellent viability of chondrocytes and MSCs was seen following bioprinting (>95%) and maintained in culture, with accelerated cell growth seen with inclusion of cell spheroids in bioinks (p<0.05). Bioprinted 10mm diameter constructs maintained shape in culture over 28 days, whilst construct degradation rates and mechanical properties were improved with addition of AlgMA (p<0.05). Composite bioinks were also injected into in vitro osteochondral defects and crosslinked in situ, with maintained cell viability and repair of osteochondral defects seen over a 14-day period. In conclusion, we developed novel composite bioinks that can be triple-crosslinked, facilitating successful chondrocyte and MSC growth in 3D bioprinted scaffolds and in vitro repair of an osteochondral defect model. This offers hope for a new approach to treating AC defects

Mesenchymal stem cells (MSCs) reside around blood vessels in all organs. This reservoir of progenitors can be ‘recruited’ in response to injury. The ability to manipulate stem cells therapeutically within injured tissue provides an attractive alternative to transplantation. Stem cells are regulated by neighbouring cells. We hypothesized that endothelial cells (ECs) influence MSC differentiation into bone and fat. MSCs were sorted from fat using fluorescent activated sorting. Their capacity to differentiate into bone, fat and cartilage was used to confirm MSC phenotype. MSCs and ECs were cultured in two-dimensions (standard culture dishes) and three-dimensions (vascular networks suspended in gel). Cocultures were exposed to osteogenic and adipogenic media. The role of EC-released factors on MSC differentiation was determined using a system in which cells share media but do not contact. Wnt pathway modulators were used to investigate the role of Wnt signalling. MSCs differentiated into bone, fat and cartilage. MSCs and ECs integrated in two- and three-dimensions. MSCs and ECs formed vessel-like structures in three-dimensions. When cultured with ECs, MSC differentiation to bone was accelerated while differentiation to fat was inhibited. This effect on osteogenesis was maintained when cells shared media but did not contact. Coculture with Wnt modulators confirmed that this effect is in part, mediated through Wnt signalling. Our data suggest that ECs influence MSC differentiation. Therapeutic targeting of EC-MSCs signalling may enable manipulation of MSCs in vivo avoiding the need for cell transplantation. This could enable trauma and orthopaedic patients who have healthy resident stem cells to self-repair

Introduction. The concept of “bone graft expanders” has been popularised to increase the volume and biological activity of the implanted Material. HYPOTHESIS. Orthoss® granules support exogenously seeded MSCs and attract neighbouring host MSCs. Methods. In 3-D cultures’ Orthoss® granules were seeded with 2×10. 5. bone marrow MSCs/granule and maintained in MSC expansion or differentiation media for 21 days. In homing experiments’ bone autografts were placed in close proximity to Orthoss®. Scaffold colonisation and MSC differentiation were assessed by confocal microscopy’ standard electron microscopy’ and energy-dispersive X-ray spectroscopy. Results. Long-term incubation of MSC/scaffold resulted in formation of multiple cell-matrix layers lining the scaffold pores as well as outer surfaces. MSC differentiation to osteoblasts was evident as strong deposition of Calcium and Phosphorus was detected in both MSC expansion and osteogenic conditions. Cell egress experiments demonstrated the migration of cells from neighbouring autografts and their attachment and re-settlement on Orthoss®. Discussion & Conclusions. Orthoss® scaffolds support MSC attachment’ growth and osteogenic differentiation whereas resident bone subpopulations can rapidly migrate towards’ attach’ and expand on them. These results indicate that Orthoss® can serve as a graft expander for repairing large bone defects in trauma patients

Introduction. Regenerative medicine is a rapidly expanding discipline. However due to a lack of validated outcome measures, clinical trials have been far few. This study aims to assess the validity, inter-observer reliability and intra-observer reproducibility of experimental fracture healing assessment on plain radiographies. This technique involves implantation of mesenchymal stem cell (MSC) seeded constructs on only one side of the fracture after randomisation. Methods. We examined inter/intraobserver agreement on the area and “bridging length” of callus formed on opposite sides of the fracture. Among 16 orthopaedic surgeons with trauma commitments (8 consultants, 8 registrars) on two separate occasions (average 52 days apart). They independently assessed the radiographs (AP or lateral) of 28 patients with fractures of the tibial or femoral shaft. The fractures chosen included non-unions treated with MSC/constructs and fresh fractures at 4–9 months. For each radiograph the assessor assigned which side (medial or lateral) is there more callus. Chase-corrected agreement using Fleiss kappa was used to compare opinions. Digital analysis software (Image-J) was used to quantify extent/bridging callus and correlate it with surgeons opinion. Results. Inter-observer variation showed a substantial overall agreement (k = 0.716) on the fracture side containing a larger “area” of callus but moderate agreement (k = 0.489) on side with more “bridging length”. These results were reproducible with a substantial overall intraobserver agreement. MSC/construct treated non-union showed a larger amount of agreement than fresh fractures for area (k = 0.754 vs 0.613) and bridging (0.550 vs 0.406). Utilizing digital analysis, non-unions showed a significant larger quantifiable difference between sides than fresh fractures (p = 0.009) for area but not bridging length (p = 0.269). Digital analysis quantification and surgeons opinion showed an almost perfect agreement for area (k = 0.867) and bridging (k = 0.846). Discussion. In this study we aimed to validate a novel method at studying the efficacy and effect of regenerative techniques on fracture healing. In particular, plain radiographs for comparing a treatment/internal control side. In this study we showed this method assessing area of callus is valid, reliable and reproducible. This is particularly so for MSC/construct treated non-union where the difference in both sides is higher as quantified in digital analysis. This is a novel method of experimental fracture healing using an internal control which decreases the variation between groups and sample size needed. This makes regenerative medicine clinical trials easier

We hypothesise that the Masquelet induced membrane used for the reconstruction of large bone defects were likely to involve mesenchymal stem cells (MSCs), given the excellent resultant skeletal repair. This study represents the first characterisation in humans of the induced membrane formed as a result of the Masquelet technique. Methods. Induced membranes and matching periosteum were harvested from 7 patients. Cytokines (BMP2, VEGF, SDF1) and cell lineage markers (CD31, CD271, CD146) were studied by immunohistochemisty. Flow cytometry was used to measure the cellularity and cellular composition. MSCs were enumerated using a colony forming unit fibroblast assay. In expanded cultures, a 96-gene array card was used to assess their transcriptional profile. Alkaline phophatase, alizarin red and calcium assays were employed to measure their in vitro osteogenic potential. Results. Membrane was more cellular(p=0.028), had more MSC phenotype(p=0.043) compared to matched periosteum. The molecular profiles were similar, except for 2-fold abundance of SDF-1 in membrane (p=0.043)compared to periosteum. Membrane and periosteum had a similar proportion of endothelial cells and CFU-F colonies; expanded MSCs from both sources were highly osteogenic. Discussion. These results indicate that the induced membrane possesses a rich source of MSC and therefore our findings support the view that the induced membrane plays an active role in bone regeneration

Introduction. iPSCs represent a promising cell source for bone regeneration. To generate osteoprogenitor cells, most protocols use the generation of embryoid bodies (EBs). However, these protocols give rise to heterogeneous population of different cell lineage. Hypothesis. We hypothesized that a direct plating method without EB formation step could be an efficient protocol for generating a homogeneous population of osteoprogenitor cells from iPSCs. Materials & Methods. Murine iPSC colonies were dissociated with trypsin-EDTA, and obtained single cells were cultured on gelatin-coated plates in MSC medium and FGF-2. Adherent cells obtained by this direct-plating technique were termed as direct-plated cells (DPCs). DPCs were evaluated for cell-surface protein expression using flow cytometry. Expression levels of Oct-3/4 mRNA in iPSCs and DPCs were analyzed by real-time PCR. DPCs were cultured for 14 days in osteogenic medium. Osteogenic differentiation was evaluated by alkaline phosphatase (ALP) activity, real-time PCR, and alizarin red S staining. Results. Expression level of Oct-3/4 in DPCs was robustly down-regulated compared to that in iPSCs. Flow cytometry analysis revealed DPCs had similar characteristics to MSC, suggesting DPCs lost pluripotency. Moreover, the DPCs exhibited high osteogenic potential. Discussion & Conclusion. Our novel direct plating method in the absence of EB formation step could be amenable to large-scale production of osteoprogenitor cells for bone regeneration

Bone is the second most commonly transplanted tissue worldwide, with over four million operations using bone grafts or bone substitute materials annually to treat bone defects. However, significant limitations affect current treatment options and clinical demand for bone grafts continues to rise due to conditions such as trauma, cancer, infection and arthritis. The need for a novel, cost effective treatment option for osteochondral defects has therefore never been greater. As an emerging technology, three-dimensional (3D) bioprinting has the capacity to deposit cells, extracellular matrices and other biological materials in user-defined patterns to build complex tissue constructs from the “bottom up”. Through use of extrusion bioprinting and fused deposition modelling (FDM) 3D printing, porous 3D scaffolds were successfully created in this study from hydrogels and synthetic polymers. Mesenchymal stem cells (MSCs) seeded onto polycaprolactone scaffolds with defined pore sizes and porosity maintained viability over a 7-day period, with addition of alginate hydrogel and scaffold surface treatment with NaOH increasing cell adhesion and viability. MSC-laden alginate constructs produced via extrusion bioprinting also maintained structural integrity and cell viability over 7 days in vitro culture. Growth within osteogenic media resulted in successful osteogenic differentiation of MSCs within scaffolds compared to controls (p<0.001). MSC spheroids were also successfully created and bioprinted within a novel, supramolecular hydrogel with tunable stiffness. In conclusion, 3D constructs capable of supporting osteogenic differentiation of MSCs were biofabricated via FDM and extrusion bioprinting. Future work will look to increase osteochondral construct size and complexity, whilst maintaining cell viability

Introduction. MSCs have long promised benefits of synthesising bone/cartilage, treating non-unions and potentially accelerating fracture repair. This potential has been tempered by MSC scarcity in the ‘gold-standard’ iliac crest bone marrow aspirate (ICBMA) and the resulting need to expand numbers via cell-culture. Culture of MSCs is time-consuming, expensive and results in cells with a reduced differentiation capacity. The reamer-irrigator-aspirator (RIA) is an innovation designed to reduce intra-medullary (IM) pressures during reaming of long-bones via continuous irrigation and suction. Aspirated contents are passed via a coarse filter, which traps bony-fragments before moving into a ‘waste’ bag - from which MSCs have been previously isolated. We examined liquid and solid phases found in this ‘waste’, performed a novel digestion of the solid phase and made a comparative assessment in terms of number, phenotype and differentiation capacity with matched ICBMA. Methods. The filtrate ‘waste’ bag from RIA reaming (6 patients) was filtered (70μm) and the solid fraction digested for 60min (37°C) with collagenase. MSCs were isolated from liquid & solid fractions and from 10ml matched ICBMA. Enumeration of MSCs was achieved via colony-forming-unit-fibroblast (CFUF) assay and flow-cytometry on fresh sample using CD45low, CD271+. MSCs were cultured by virtue of their plastic adherence and passaged in standard, non-haematopoietic media. Passage (P2) cells were differentiated towards osteogenic, adipogenic and chondrogenic lineages with their phenotype assessed with flow cytometry CD33 CD34 CD45 CD73 CD90 CD105. Results. We found MSCs were in all fractions/patients. Using the CFU-F assay median number of colonies: ICBMA=8 (2–21), RIA-liquid=12 (4–41), RIA-solid=115 (67–200) per 200μl of sample. Total yield of cells was calculated from volume of sample: ICBMA=670 (228–4275), RIA-liquid=39000 (16500–83700), RIA-solid=9400 (7210–28475). MSC frequency as a percentage of total cells using flow-cytometry on fresh sample found similar frequencies. MSCs isolated from the RIA phases differentiated into osteogenic, chondrogenic and adipogenic lineages at least as well as ICBMA. Passaged (P2) cells, from all fractions/patients, had a phenotype consistent with other reported sources. Discussion. The RIA filtrate bag is typically discarded at operation. These results show that this ‘waste’ represents a significant source of MSCs that could be isolated for autologous/allogenous use. Concentration of the liquid-phase/brief enzymatic digestion of the solid-phase offers the possibility of large numbers of MSCs being obtained without/with minimal culture expansion

Proliferation of synovial Mesenchymal Stromal/Stem Cells (MSCs) leads to synovial hyperplasia (SH) following Joint Surface Injury (JSI). Uncontrolled Yap activity causes tissue overgrowth due to modulation of MSC proliferation. We hypothesised that YAP plays a role in SH following JSI. A spatiotemporal analysis of Yap expression was performed using the JSI model in C57Bl/6 mice. Synovial samples from patients were similarly analysed. Gdf5-Cre;Yap1fl/fl;Tom mice were created to determine the effect YAP1 knockout in Gdf5 lineage cells on SH after JSI. In patients, Yap expression was upregulated in activated synovium, including a subset of CD55 positive fibroblast-like synoviocytes in the synovial lining (SL). Cells staining positive for the proliferation marker Ki67 expressed active YAP. In mice, Yap was highly expressed in injured knee joint synovium compared to controls. Yap mRNA levels at 2 (p<0.05) and 8 days (p<0.001) after injury were increased. Conditional Yap1 knockout in Gdf5 progeny cells prevented hyperplasia of synovial lining (SL) after JSI. Cellularity was significantly decreased in the SL but not in the sub-lining of injured Yap1 knockout- compared to control mice. The percentage of cells in synovium that were Tom+ increased in response to JSI in control and haplo-insufficient but not in YAP1 knockout mice (p<0.05). Modulation of YAP and proliferation of MSCs in the synovium after JSI provides a system to study the role of SH after trauma in re-establishing joint homeostasis and is a potential novel therapeutic target for the treatment of post traumatic OA

Adipose tissue is an attractive source of mesenchymal stem cells (MSCs) as it is largely dispensable and readily accessible through minimally invasive procedures such as lipoaspiration. Until recently MSCs could only be isolated in a process involving ex-vivo culture. Pericytes (CD45−, CD146+, and CD34−) and adventitial cells (CD45−, CD146−, CD34+) represent two populations of MSCs (collectively termed perivascular stem cells or PSCs) that can be prospectively purified using fluorescence activated cell sorting (FACS). We performed FACS on lipoaspirate samples from n=129 donors to determine the frequency and yield of PSCs and to establish patient and processing factors that influence yield. The mean number of stromal vascular fraction (SVF) cells from 100ml of lipoaspirate was 37.8×106. Within the SVF, mean cell viability was 82%, with 31.6% of cells being heamatopoietic (CD45+). Adventitial cells and pericytes represented 31.6% and 7.9% of SVF cells respectively. As such, 200ml of lipoaspirate would theoretically yield 24.5 million MSCs –a sufficient number to enable point-of-care delivery for use in several orthopaedic applications. The yield and prevalence of PSCs were minimally affected by donor age, sex and BMI. Storing lipoaspirate samples for up to 72 hours prior to processing had no significant deleterious effects on MSC yield or viability. Our study confirms that pure populations of MSC-precursors (PSCs) can be prospectively isolated from adipose tissue, in sufficient quantities to negate the necessity for culture expansion while widening possible applications to include trauma, where a time delay between extraction and implantation excludes their use

Purpose. The purpose of this study was to evaluate the effects of implantation of mesenchymal stem cell derived condrogenic cells (MSC-DC) on bone healing in segmental defects in rat femur. Methods. Five-millimeter segmental bone defects were produced in the mid-shaft of the femur of Fisher 344 rats and stabilized with external fixator. The Treatment Group received MSC-DC, seeded on a PLGA scaffold, locally at the site of the bone defect, and Control Group received scaffold only. The healing processes were monitored radiographically (Softex), and studied radiographically (Micro-CT) and histologically. Results. All the bone defects in the Treatment Group healed radiographically with bridging callus formation at 4 weeks after the procedure, while none of the Control Group had achieved bone union. Micro-CT showed that newly formed bone volume in the Treatment Group at 16 weeks was 1.5 times that of unaffected side. Histological examination showed that the implanted scaffold of the Treatment Group were covered with periosteum-derived bridging callus and filled with cancellous bone-like tissue derived from enchondral ossification. Conclusion. The results of this study suggest that implantation of MSC-DC surprisingly enhances bone healing in segmental bone defects in rat much better than previously reported similar therapy using MSC

Exercise deters systemic diseases such as osteoporosis, sarcopenia, diabetes and obesity. Brief daily periods of low intensity vibration (LIV; <0.4g) is anabolic to bone and muscle, an adaptive response achieved in part by biasing mesenchymal stem cell (MSC) fate selection towards forming higher order connective tissues. In the clinic, LIV has protected the musculoskeletal system even under severe challenges such as Crohn Disease, Cerebral Palsy, and end-stage renal disease. Low magnitude mechanical signals also suppress adipogenesis in the mouse, with reductions in subcutaneous and visceral fat. The starkly distinct response of these tissues (augment bone & muscle; suppress fat) suggests that LIV influences the differentiation pathway of MSCs. Extending this diet induced obesity model to 7 months increased total adiposity, accelerated age-related loss of trabecular bone and severely reduced B & T-cell number in the marrow and blood, shifting hematopoietic stem cells (HSC) towards the myeloid lineage. LIV introduced at 4 months rescued bone and B-cells to those levels measured in regular diet controls. These data emphasise why inactivity can promote osteoporosis, diabetes and obesity, and why a sedentary individual is predisposed to disease sequelae. Protection of MSC and HSC populations by mechanical signals may represent a unique strategy by which adiposity can be suppressed, the immune system protected, and a musculoskeletal system enhanced

Reconstruction of 10mm segmental bone defects in rat by mesenchymal stem cell derived chondrogenic cells (MSC-DC). Background. Mesenchymal stem cell derived condrogenic cells (MSC-DC) have excellent potential for healing 5 mm bone defect in rat femur. Purpose. To evaluate the effectiveness of MSC-DC on bone healing in 10 mm segmental bone defects in rat femur. Methods. 10 millimeter bone defects were produced in rat femur and fixed with external fixator. We divided this model into four groups according to the kind of graft for bone defects. These bone defects were grafted by MSC-DC seeded on a poly (DL-lactic acid-co-glycolic acid) (PLGA) scaffold in Group A, MSC seeded on a PLGA scaffold in Group B, PLGA scaffold only in Group C, and autologus bone graft in Group D. The healing processes were monitored radiographically and studied biomechanically and histologically. Results. All the bone defects in Group A healed radiographically with bridging callus formation at 4 weeks after the procedure, while none of Group B, C, and D had achieved bone union even at 8 weeks. Mechanical testing revealed that Group A showed approximately 40 % bending strength at 4 weeks compared with the contralateral side, and approximately 60 % at 8 weeks. In histology, Group A, maturation of bridging callus occurred from outside and enchondral ossification was prominent from inside. Conclusion. This study showed that MSC-DC with PLGA scaffold enhances bone healing even in large bone defects

Introduction. Iliac crest bone marrow aspirate (ICBMA) is frequently cited as the ‘gold-standard’ source of MSCs. Mesenchymal stem cells have been shown to reside within the intramedullary (IM) cavities of long-bones and a comparative assessment with ICBMA has not yet been performed. Methods. Aspiration of the IM cavities of 6 patients' femurs with matched ICBMA was performed. The long-bone-fatty-bone-marrow (LBFBM) aspirated was filtered (70μm) and the solid fraction digested for 60min (37°C) with collagenase. Enumeration was performed via the colony-forming-unit-fibroblast (CFU-F) assay and using the CD45low CD271+ phenotype via flow-cytometry. Passaged (P2) cells were differentiated towards osteogenic, adipogenic and chondrogenic lineages with their phenotype assessed using flow-cytometry CD33 CD34 CD45 CD73 CD90 CD105. Results. MSCs were isolated from all fractions. Using the CFU-F assay median number of colonies: ICBMA=8 (2–21), LBFBM-liquid=14 (0–53), LBFBM-solid=116 (23–171) per 200μl of sample; MSC frequency, as percentage of total cells, using flow-cytometry, provided similar results. Mesenchymal stem cells isolated from the LBFBM phases appeared to not be inferior to ICBMA in terms of osteogenic, chondrogenic or adipogenic differentiation. Passaged cells from all fractions had a phenotype consistent with other reported sources. Discussion. Intra-medullary cavities of long-bones are frequently accessed by the orthopaedic/trauma surgeon. This represents a ‘low-tech’ method of harvesting large numbers of MSCs with a favourable differentiation profile for autologous/allogenous uses

Distal radius fractures are typical and frequent fracture of elderly woman with reduced bone density. Thus implant fixation is more difficult. Dorsal and radial comminution are frequent in these patients and so reduction and angle stable osteosynthesis needed. The angle stable plate, often also multidirectional is today the most common stabilisation device. Because of the introduction of bulky and bended implants as the Micronail or Targon DR wich require difficult opening of the bone with awles we decided to test the XS radius nail witch is a 4,5mm or 3,5mm straight nail and witch is introduced after guide wire placement and over drilling with a canulated drill of the same diameter. It is locked parallel to the joint in 3 different directions with angular stability with threaded wires. Methods 16 radius sawbones were osteotomised corresponding to a A3 Fracture and stabilised with a angle stable plate (8) and XS nail (8). 1000 alternating load cycles from 20–200N were performed and the deformation was registered. Also a FE analysis with the MSC Patran/Marc softwere were performed. Also the calculated deformation in the FE study was 20% lower. Also deformation amplitude was lower with 0.31mm compared to 0.42mm in the plate group. The differences however were not significant. Both devices show good biomechanical results. The XS nail has the advantage of mainly intraosseus position, simple operation technique with introduction over a guide wire from the proc. Styloideus radii and over drilling with a canulated drill of the same size. The exposure of the N rad. superf. must be performed. First clinical evaluation is presented. Due to the results we developed a anatomically adapted XS radius nail. The results of the first 100 patients are presented. Conclusions. Both angular stable plate and XSR nail can be used in unstable distal radius fracture fixation. The mainly intraosseus position of the nail and saving of the pronator quadratus as well as lower deformation are in favour of the XSR nail. However frontal plane fractures and very comminuted fractures are better treated with a multidirectional locking plate due to technical reasones so that we use the XSR nail mainly in A3 and C1 fractures

The scarcity of mesenchymal stem cells (MSCs) in iliac crest bone marrow aspirate (ICBMA), and the expense and time in culturing cells, has led to the search for alternative harvest sites. The reamer-irrigation-aspirator (RIA) provides continuous irrigation and suction during reaming of long bones. The aspirated contents pass via a filter, trapping bony fragments, before moving into a ‘waste’ bag from which MSCs have been previously isolated. We examined the liquid and solid phases, performed a novel digestion of the solid phase, and made a comparative assessment in terms of number, phenotype and differentiation capacity with matched ICBMA.

The solid fraction from the filtrate was digested for 60 minutes at 37°C with collagenase. Enumeration was performed via the colony-forming unit fibroblast (CFU-F) assay. Passage (P2) cells were differentiated towards osteogenic, adipogenic and chondrogenic lineages, and their phenotypes assessed using flow cytometry (CD33, CD34, CD45, CD73, CD90, and CD105).

MSCs from the RIA phases were able to differentiate at least as well as those from ICBMA, and all fractions had phenotypes consistent with other established sources. The median number of colonies for the three groups was: ICBMA = 8.5 (2 to 86), RIA-liquid = 19.5 (4 to 90), RIA-solid = 109 (67 to 200) per 200 μl. The mean total yield of cells for the three groups was: ICBMA = 920 (0 to 4275), RIA-liquid = 114 983 (16 500 to 477 750), RIA-solid = 12 785 (7210 to 28 475).

The RIA filtrate contains large numbers of MSCs that could potentially be extracted without enzymatic digestion and used for bone repair without prior cell expansion.