Abstract. Introduction. Transforming outpatient services is a key commitment set out in the NHS Long Term Plan, with particular emphasis on digital solutions to reduce outpatient follow-up (FU) by 25%. This study looks at the potential for removing knee arthroscopy FU by providing a bespoke multimedia report for each individual patient, generated using the Synergy™ Surgeon App (Arthrex). Methodology. Single District Hospital using a 3 Phase study. Phase 1 – Assessment of cost and environmental impact of outpatient follow up appointments. Phase 2 – Bench marking of existing pathways and patient experience. Phase 3 – Qualitative assessment of multimedia report feedback of 30 patients. Results. Phase 1 – Impact per year for Trust in released clinician time 135hrs. Cost avoidance £40-£60k. Reduction of the carbon footprint from reduced FU of 3132 KgCo2e2. Phase 2 – Deep dive on 2019 n. 353 procedures. 1206 outpatient appointments required. Average 1.2 post-operative appointments. Phase 3 – 87% of patients who received the e-op report needed no further FU. This compares to only 25% using a traditional post op discussion after surgery. 94% of patients felt the report aided their recovery. Conclusions. Reducing patient FU appointments is crucial to the future of the NHS. Achieving this whilst simultaneously improving the quality of patient communication is achievable as this study has demonstrated. The potential scalability of this project to be applied other arthroscopic procedures is enormous. The study has demonstrated patients are comfortable with modern technology and feel it enhances their understanding whilst decreasing the need for routine post-op FU

Abstract

Abstract. Introduction. Frailty is associated with poorer outcomes after joint replacement. Targeting frailty pre-operatively via protein supplementation and exercise has the potential to improve outcomes after joint replacement. Before conducting a randomised controlled trial (RCT), a feasibility study is necessary to address key uncertainties and explore how to optimise trial design. Methodology. Joint PREP is a feasibility study for a multicentre, two-arm, parallel group, pragmatic, RCT to evaluate the clinical and cost-effectiveness of prehabilitation for frail patients undergoing total hip or knee replacement. Sixty people who are ≥65 years of age, frail and scheduled to undergo total hip or knee replacement at 2–3 NHS hospitals will be recruited and randomly allocated on a 1:1 ratio to the intervention or usual care group. The intervention group will be given a daily protein supplement and will be asked to follow a home-based, tailored daily exercise programme for 12 weeks before their operation, supported by fortnightly telephone calls from a physiotherapist. Embedded qualitative research with patients will explore their experiences of participating, reasons for non-participation and/or reasons for withdrawal or treatment discontinuation. Results. Outcomes to be assessed include eligibility, recruitment and retention rates; intervention adherence; acceptability of the trial and intervention; and data completion. Data collection is ongoing. Discussion. This study will generate important data regarding the feasibility of a RCT to evaluate a prehabilitation intervention for frail patients undergoing joint replacement. A future RCT will contribute to the evidence on interventions to optimise the benefit that frail patients gain from joint replacement

Abstract. Introduction. There is a need to develop approaches to reduce chronic pain after total knee replacement. There is an established link between disturbed sleep and pain. We tested the feasibility of a trial evaluating the clinical and cost-effectiveness of a pre-operative sleep assessment and complex intervention package for improving long-term pain after TKR. Methodology. REST was a feasibility multi-centre randomised controlled trial with embedded qualitative study and health economics. Participants completed baseline measures and were randomised to usual care or the intervention, a tailored sleep assessment and behavioural intervention package delivered by an extended scope practitioner three months pre-operatively with a follow-up call up at four-weeks. Patient reported outcomes were assessed at baseline, one-week pre-surgery, and 3-months post-surgery. Results. 57 patients were randomised and 20 had surgery within the study timelines. All patients allocated the intervention attended an appointment and most engaged with treatment. The intervention group reported improvements in sleep (Sleep Conditions Indicator) and neuropathic pain (painDETECT) scores. Participants found the sleep treatments and study processes to be acceptable. The mean cost of the intervention was estimated at £134.45 per patient. Conclusion. The feasibility study has shown that patient recruitment is feasible, engagement with and adherence to the intervention is high, and the intervention is acceptable to patients and clinicians. Preliminary findings show that the intervention group had improved sleep quality and had reduced levels of pre-operative neuropathic pain. This study has demonstrated that a full RCT is feasible and identified areas for improvement to optimize the trial design

Abstract. Introduction. Challenges in surgical training have led to the exploration of technologies such as augmented reality (AR), which present novel approaches to teaching orthopaedic procedures to medical students. The aim of this double-blinded randomised-controlled trial was to compare the validity and training effect of AR to traditional teaching on medical students’ understanding of total knee arthroplasty (TKA). Methodology. Twenty medical students from 7 UK universities were randomised equally to either intervention or control groups. The control received a consultant-led teaching session and the intervention received training via Microsoft HoloLens, where surgeons were able to project virtual information over physical objects. Participants completed written knowledge and practical exams which were assessed by 2 orthopaedic consultants. Training superiority was established via 4 quantitative outcome measures: OSATS scores, a checklist of TKA-specific steps, procedural time, and written exam scores. Qualitative feedback was evaluated using a 5-point Likert scale. Results. AR training was superior in teaching basic technical proficiency and understanding of TKA, with the intervention group significantly outperforming the control group in 3 metrics [OSATS (38.6%, p=0.021), checklist (33%, p=0.011) and written exam (54.5%, p=0.001)]. Procedural time was equivalent between cohorts (p=0.082). AR was rated as significantly more enjoyable (p=0.044), realistic (p=0.003), easy to understand (p=0.040), and proficient in teaching (p=0.02). Conclusion. In this adequately powered, double-blinded randomised-controlled trial, AR training demonstrated substantially improved translational technical skills and knowledge needed to understand TKA over traditional learning in medical students. Additionally, the results showed face, content, and transfer validity for AR in surgical training

Abstract. Introduction. In recent years, CTA has been an effective training adjunct for orthopaedic procedures. ACLR is a complex procedure with a steep learning curve. Aim. To design a multimedia CTA learning tool for ACLR using a modified Delphi methodology. Methodology:. CTA generation: A modified Delphi method was used to generate a list of Technical Steps (TS), Decision Points (DP) and errors/solutions for an ACLR that was approved by an expert consensus amongst four, fellowship-trained knee surgeons. A technical workflow was designed to generate the audio-visual tool. Pilot study: 30 novice trainees were granted access to the CTA tool and then performed the ACLR in a cadaveric simulation workshop. A 5-point Likert scale aimed to qualitatively assess if the CTA was useful to their learning. Results:. CTA generation: 156 TS and 79 DP were included for an ACLR procedure which was divided into 7 phases. The audio-visual component was combined with the written tool to design the final CTA tool. Pilot study: 95% of trainees suggested the CTA tool would be useful before carrying out an ACLR in the operating theatre. They agreed it made their ACLR learning more effective. Conclusion:. We have designed a novel and easily accessible CTA tool to standardise teaching of ACLR surgery. Novice surgeons verify the value of the CTA as an adjunct to their apprenticeship training. Future work: A Randomised Controlled Trial (RCT) is currently being planned to evaluate whether there are any objective benefits of this CTA to train surgeons performing an ACLR

Abstract. Introduction. The NHS long term plan endorses ‘personalised’, ‘digitally enabled’, ‘out of hospital’ care. Multiagency guidance (CPOC(2021)/NICE(2021)/GIRFT(2021)/NHSX(2021)) advocates an integrated ‘pathway’ approach to information sharing, shared-decision making and patient support. Digital solutions are the vehicle to deliver these agendas. Methods. In 2018 we developed a digital joint pathway (DJP) spanning the surgical care pathway (prehabilitation to rehabilitation) using the GoWellHealth platform. Patients listed for joint replacement are offered the DJP as routine care. Activity and engagement are monitored using the DJP data library. We sought to evidence our DJP by assessing patient engagement, experience and outcomes (OKS/EQ5D/Readmission). Results. Engagement. Consecutive cohort of the first 1195 patients registered. Activation rates were >85% and >70% viewed content within the DJP (median=15 access/pt; mean=83 minutes on DJP/pt). Engagement was similar irrespective of age and gender (p=NS). Older patients preferred to access via a computer. Experience. Qualitative interviews (n=14) demonstrated patients felt the DJP impacted positively on their health behaviours and contributed to their recovery. They spoke positively about the use of technology and the accessibility of the DJP. Outcomes. Comparison of patients on the DJP versus those not on the DJP using adjusted regression models demonstrated improved EQ5D=0.070 (95%CI=0.004-0.135,p=0.04), OKS=5.0 (95%CI=2.2-7.8,p<0.001) and readmission rates (3.6% versus 5.6%,p<0.01) for DJP patients. Conclusions. A DJP model for information delivery and patient support, across the entirety of the surgical pathway, is feasible and demonstrates high levels of patient engagement, experience and improved patient outcomes

Objectives. A patient-centred approach, usually achieved through shared decision making, has the potential to help improve decision making around knee arthroplasty surgery. However, such an approach requires an understanding of the factors involved in patient decision making. This review’s objective is to systematically examine the qualitative literature surrounding patients’ decision making in knee arthroplasty. Methods. A systematic literature review using Medline and Embase was conducted to identify qualitative studies that examined patients’ decision making around knee arthroplasty. An aggregated account of what is known about patients’ decision making in knee arthroplasties is provided. Results. Seven studies with 234 participants in interviews or focus groups are included. Ten themes are replicated across studies, namely: expectations of surgery; coping mechanisms; relationship with clinician; fear; pain; function; psychological implications; social network; previous experience of surgery; and conflict in opinions. Conclusions. This review is helpful in not only directing future research to areas that are not understood, or require confirmation, but also in highlighting areas that future interventions could address. These include those aimed at delivering information, which are likely to affect the satisfaction rate, demand, and use of knee arthroplasties. Cite this article: Bone Joint Res 2015;4;163–169

Introduction. The role of porosity in the longevity of polymethylmethacrylate (PMMA) bone cement mantles remains unclear, although porosity reduction is probably desirable. It is not known whether pore patterns, pore distribution or pore morphology contribute to failure, since it is difficult to assess these features with traditional techniques. We used a novel microtomographic technique to quantitatively and qualitatively assess porosity in PMMA cements of differing viscosities to establish whether pore distribution can be effectively assessed and to document any differences in porosity (in both quantity, distribution and morphology). Each cement was also examined with and without the addition of vacuum, since this is thought to reduce porosity. Methods and materials. Four PMMA bone cements of different viscosities (three of the same brand and the fourth chosen due to its popularity) were prepared and moulded according to established protocols (ASTM F451-99a), with and without the addition of vacuum. 25 samples per group (200 total) were prepared and densities for each sample calculated using Archimedes' principle. Four samples per group (total 32) were randomly selected for further analysis. These samples underwent micro-computer tomography (micro-CT) at a magnification of 20× and slice thickness of 13.67μm and reconstructed images were analysed with in-house developed software to measure pore size and volume. Results were analysed and compared with the two-sample T-test assuming significance at P<0.05. Qualitative assessment of pore character and distribution was made using three dimensional (3D) reconstruction. Results. Densities and mean total pore volume showed an overall reduction in porosity with vacuum. Mean pore volume (MPV) was not significantly different between samples due to the huge range of pore sizes. Qualitative assessment revealed a striking, distinctive pore distribution between cements with an asymmetric distribution in the high viscosity group. Pore size was also qualitatively distinct between cement types and groups with and without vacuum. Conclusion. Micro-CT allows detailed in vitro quantitative and qualitative assessment of porosity in PMMA cement. Pore volume, architecture and volumetric distribution differ in cements of differing viscosity and with or without the application of vacuum. This effect is marked enough to allow distinction between cements based on their micro-CT appearances. Further study using this technique in combination with other methods (such as quantitative analysis of 3D pore distribution) may shed light on the failure mechanisms in PMMA cement mantles, particularly with regard to the role of pore orientation, distribution and size

Aims

Total knee arthroplasty (TKA) may provoke ankle symptoms. The aim of this study was to validate the impact of the preoperative mechanical tibiofemoral angle (mTFA), the talar tilt (TT) on ankle symptoms after TKA, and assess changes in the range of motion (ROM) of the subtalar joint, foot posture, and ankle laxity.

Aims

As has been shown in larger animal models, knee immobilization can lead to arthrofibrotic phenotypes. Our study included 168 C57BL/6J female mice, with 24 serving as controls, and 144 undergoing a knee procedure to induce a contracture without osteoarthritis (OA).

Aims

Obtaining solid implant fixation is crucial in revision total knee arthroplasty (rTKA) to avoid aseptic loosening, a major reason for re-revision. This study aims to validate a novel grading system that quantifies implant fixation across three anatomical zones (epiphysis, metaphysis, diaphysis).

Aims

The diagnosis of periprosthetic joint infection (PJI) continues to present a significant clinical challenge. New biomarkers have been proposed to support clinical decision-making; among them, synovial fluid alpha-defensin has gained interest. Current research methodology suggests reference methods are needed to establish solid evidence for use of the test. This prospective study aims to evaluate the diagnostic accuracy of high-performance liquid chromatography coupled with the mass spectrometry (LC-MS) method to detect alpha-defensin in synovial fluid.

Aims

To evaluate whether low-intensity pulsed ultrasound (LIPUS) accelerates bone healing at osteotomy sites and promotes functional recovery after open-wedge high tibial osteotomy (OWHTO).

Aims

The aim of this study was to determine the risk of tibial eminence avulsion intraoperatively for bi-unicondylar knee arthroplasty (Bi-UKA), with consideration of the effect of implant positioning, overstuffing, and sex, compared to the risk for isolated medial unicondylar knee arthroplasty (UKA-M) and bicruciate-retaining total knee arthroplasty (BCR-TKA).

Aims

The aim of this study was to investigate whether wear and backside deformation of polyethylene (PE) tibial inserts may influence the cement cover of tibial trays of explanted total knee arthroplasties (TKAs).

Aims

Wear of the polyethylene (PE) tibial insert of total knee arthroplasty (TKA) increases the risk of revision surgery with a significant cost burden on the healthcare system. This study quantifies wear performance of tibial inserts in a large and diverse series of retrieved TKAs to evaluate the effect of factors related to the patient, knee design, and bearing material on tibial insert wear performance.

Introduction. As intra-operative fluoroscopic identification of the isometric MPFL attachment to the femur can be imprecise and laborious in a surgical setting, we used clinical criteria to identify the isometric point and then studied post-operative radiographs to find out whether it was achieved and compared it with functional outcome. Materials and Methods. Sixteen patients underwent 17 MPFL reconstructions using autologous semi-tendinosis tendon graft. Clinical judgement was used to identify the optimal point for femoral attachment of the MPFL without fluoroscopy control. Post-operative radiographs at 2 weeks were analysed to confirm whether an isometric point for the reconstructed MPFL was achieved by dividing the distal femur into 4 quadrants by 2 lines on the lateral radiograph. Telephonic interview was conducted to assess functional scores using the Kujala score at a mean follow-up of 13 months. Results. In only 4 of the 17 cases, the femoral point of attachment lay in the radiographically isometric (antero-proximal) quadrant. In 8 of 17 knees, the point of MPFL attachment lay in the antero-distal quadrant. However, there was an improvement in the functional score in 14 of 16 patients, with none reporting recurrence of patellar instability. The position of the reconstructed MPFL did not correlate with functional score. Conclusion. Over-reliance on a clinical method alone for identification of the optimal point for MPFL attachment without an intra-operative radiograph leads to radiographically non-isometric positioning in a majority of cases. In the clinical setting, however, this does not correlate with adverse functional outcome, although intra-operative fluoroscopy may improve the anatomical isometry, and we therefore suggest the use of a qualitative clinical method to achieve optimal

Introduction. The aim of this study was to investigate whether methylene blue dye, commonly used in sterile surgical marker pens, would have an effect on human chondrocyte viability, when cultured on a collagen membrane in-vitro. Methods. Bilayered collagen membranes were seeded in duplicate with 12 million human chondrocytes per ml and cultured for 24 hours under standard conditions. Group A consisted of a membrane marked with methylene blue ink on its smooth side, group B marked on its porous side, and group C acting as an unmarked control. At the end of the culture period the membranes were qualitatively analysed for cell survival by live/dead fluorescent staining under confocal microscopy. Results. The control membranes of group C showed normal ‘live’ staining of cells. A marked reduction in chondrocyte viability was seen in groups A and B, with a significant reduction in viability seen opposite to the ink mark on the smooth side in A, and practically no cell viability in the same position on the porous side in group B. Conclusions. Methylene blue dye in surgical marker pen ink has been shown to be cytotoxic to chondrocytes cultured on bilayered collagen membranes. Sterile surgical marker pens are commonly used in cartilage repair surgery to aid in the placement of periosteal patches or collagen membranes in autologous chondrocyte transplantation. Surgeons need to be aware of the potential harmful effects of methylene blue dye when using surgical marker pens in cell based regenerative therapies

Aim. This aim of this study was to investigate apoptosis, reactive oxygen species (ROS), and their upstream markers in Anteromedial Gonarthrosis (AMG). Methods. Ten resection specimens, from patients undergoing unicompartmental knee replacement for AMG, and ten control specimens, collected from vascular disease patients undergoing above knee amputation, were used. Routine histology and immunohistochemical studies were conducted for Terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL), Active Caspase 3, Cytochrome C, Active Bax, Bim, 3-Nitrotyrosine and Forkhead box O3A (FOXO 3A). Results. Cell death was shown predominantly in the surface layer of chondrocytes of damaged cartilage (p<0.001). There was a significant difference in TUNEL staining between regions (p=0.001). This ranged from 26% (most damaged) to 4% (undamaged) and was significantly higher (p<0.001) in AMG compared to the control samples which showed an average of 2% TUNEL overall. Upstream markers of apoptosis (Active Caspase 3, Cytochrome C, Active Bax), assessed qualitatively, were present in a similar distribution to that of TUNEL staining. 3-Nitrotyrosine, an indicator of ROS mediated damage, was also shown to be a predominantly surface phenomenon. There was a significant difference (p<0.001) between regions, ranging from 58% (most damaged) to 10% (undamaged). Again, this was significantly higher that the control samples (p<0.001). In line with indicators of ROS mediated damage, Bim and FOXO3A were also detected. Discussion. In AMG, apoptosis and ROS appear to be a part of the biological process leading to cartilage degeneration. Such cellular responses in ‘stressed’ chondrocytes provide possible targets for disease modification, thus delaying or preventing the need for joint arthroplasty. Further work is required to demonstrate these pathways and the effects of intervention