Roentgen Stereophotogrammetric Analysis (RSA) is the gold standard for measuring implant micromotion thereby predicting implant loosening. Early migration has been associated with the risk of long-term clinical failure. We used RSA to assess the stability of the Australian designed cementless hip stem (Paragon TM) and now report our 5-year results. Fifty-three patients were prospectively and consecutively enrolled to receive a Paragon hip replacement. Tantalum beads were inserted into the bone as per RSA protocol and in the implant. RSA x-rays were taken at baseline 1–4 days post-surgery, at 6 weeks, 6 months, 12 months, 2 years, and 5 years. RSA was completed by an experienced, independent assessor. We reported the 2-year results on 46 hips (ANZJS 91 (3) March 2021 p398) and now present the 5-year results on 27 hips. From the 2-year cohort 5 patients had died, 8 patients were uncontactable, 1 patient was too unwell to attend, 5 patients had relocated too far away and declined. At 5 years the mean axial subsidence of the stem was 0.66mm (0.05 to 2.96); the mean rotation into retroversion was 0.49˚ (−0.78˚ to 2.09˚), rotation of the stem into valgus was −0.23˚ (−0.627˚ to 1.56˚). There was no detectable increase in subsidence or rotation between 6 weeks and 5 years. We compared our data to that published for the Corail cementless stem and a similar pattern of migration was noted, however greater rotational stability was achieved with the Paragon stem over a comparable follow-up period. The RSA results confirm that any minor motion of the Paragon cementless stem occurs in the first 6 weeks after which there is sustained stability for the next 5 years. The combination of a bi-planar wedge and transverse rectangular geometry provide excellent implant stability that is comparable to or better than other leading cementless stems

The Pivot-shift test is a clinical test for knee instability for patinets with Anterior cruciate ligament (ACL), however the test has low inter-observer reliability. Dynamic radiostereometry (dRSA) imaging is a highly precise method for objective evaluation of joint kinematics. The purpose of the study was to quantify precise knee kinematics during Pivot-shift test by use of the non-invasive dynamic RSA imaging. Eight human donor legs with hemipelvis were evaluated. Ligament lesion intervention of the ACL was performed during arthroscopy and anterolateral ligament (ALL) section was performed as a capsular incision. Pivot-shift test examination was recorded with dRSA on ligament intact knees, ACL-deficient knees and ACL+ALL-deficient knees. A Pivot-shift pattern was identifyable after ligament lesion as a change in tibial posterior drawer velocity from 7.8 mm/s in ligament intact knees, to 30.4 mm/s after ACL lesion, to 35.1 mm/s after combined ACL-ALL lesion. The anterior-posterior drawer excursion increased from 2.8 mm in ligament intact knees, to 7.2 mm after ACL lesion, to 7.6 mm after combined lesion. Furthermore a change in tibial rotation was found, with increasing external rotation at the end of the pivot-shift motion going from intact to ACL+ALL-deficient knees. This experimental study demonstrates the feasibility of RSA to objectively quantify the kinematic instability patterns of the knee during the Pivot-shift test. The dynamic parameters found through RSA displayed the kinematic changes from ACL to combined ACL-ALL ligament lesion

Aims. For many designs of total knee arthroplasty (TKA) it remains unclear whether cemented or uncemented fixation provides optimal long-term survival. The main limitation in most studies is a retrospective or non-comparative study design. The same is true for comparative trials looking only at the survival rate as extensive sample sizes are needed to detect true differences in fixation and durability. Studies using radiostereometric analysis (RSA) techniques have shown to be highly predictive in detecting late occurring aseptic loosening at an early stage. To investigate the difference in predicted long-term survival between cemented, uncemented, and hybrid fixation of TKA, we performed a randomized controlled trial using RSA. Methods. A total of 105 patients were randomized into three groups (cemented, uncemented, and hybrid fixation of the ACS Mobile Bearing (ACS MB) knee system, implantcast). RSA examinations were performed on the first day after surgery and at scheduled follow-up visits at three months, six months, one year, and two years postoperatively. Patient-reported outcome measures (PROMs) were obtained preoperatively and after two years follow-up. Patients and follow-up investigators were blinded for the result of randomization. Results. RSA secondary stabilization did not show a significant difference between the three types of fixation. A maximum total point motion of less than 0.2 mm in the second postoperative year was shown in each group, which suggests stabilization of the implant. At 24 months after surgery, PROMs significantly improved compared to baseline in all treatment groups. No significant difference was observed between the three groups. Conclusion. Secondary stabilization measurements in this study demonstrated no significant difference between the groups. In all groups migration stabilized after initial settling of the implant. For this implant the long-term outcome is not expected to be influenced by the type of fixation to the bone. Cite this article: Bone Joint J 2021;103-B(1):98–104

Aims. The objective of this study was to compare the two-year migration pattern and clinical outcomes of a total knee arthroplasty (TKA) with an asymmetrical tibial design (Persona PS) and a well-proven TKA with a symmetrical tibial design (NexGen LPS). Methods. A randomized controlled radiostereometric analysis (RSA) trial was conducted including 75 cemented posterior-stabilized TKAs. Implant migration was measured with RSA. Maximum total point motion (MTPM), translations, rotations, clinical outcomes, and patient-reported outcome measures (PROMs) were assessed at one week postoperatively and at three, six, 12, and 24 months postoperatively. Results. A linear mixed-effect model using RSA data of 31 asymmetrical and 38 symmetrical TKAs did not show a difference in mean MTPM migration pattern of the tibial or femoral components. Mean tibial component MTPM at two years postoperative of the asymmetrical TKA design was 0.93 mm and 1.00 mm for the symmetrical design. For the femoral component these values were 1.04 mm and 1.14 mm, respectively. No significant differences were observed in other migration parameters or in clinical and PROM measurements. Conclusion. The TKA design with an asymmetrical tibial component has comparable component migration with the proven TKA with a symmetrical tibial component. This suggests the risk of long-term aseptic loosening of the two designs is comparable. Cite this article: Bone Joint J 2021;103-B(5):855–863

Aims. Reverse shoulder arthroplasty (RSA) has become the most common type of shoulder arthroplasty used in the UK, and a better understanding of the outcomes after revision of a failed RSA is needed. The aim of this study was to review the current evidence systematically to determine patient-reported outcome measures and the rates of re-revision and complications for patients undergoing revision of a RSA. Methods. MEDLINE, Embase, CENTRAL, and the Cochrane Database of Systematic Reviews were searched. Studies involving adult patients who underwent revision of a primary RSA for any indication were included. Those who underwent a RSA for failure of a total shoulder arthroplasty or hemiarthroplasty were excluded. Pre- and postoperative shoulder scores were evaluated in a random effects meta-analysis to determine the mean difference. The rates of re-revision and complications were also calculated. Results. The initial search elicited 3,166 results and, following removal of duplicates and screening, 13 studies with a total of 1,042 RSAs were identified. An increase in shoulder scores pre- to postoperatively was reported in all the studies. Following revision of a RSA to a further RSA, there was a significant increase in the American Shoulder and Elbow Surgeons Score (mean difference 20.78 (95% CI 8.16 to 33.40); p = 0.001). A re-revision rate at final follow-up ranging from 9% to 32%, a one-year re-revision rate of 14%, and a five-year re-revision rate of 23% were reported. The complication rate in all the studies was between 18.5% and 36%, with a total incidence of 29%. Conclusion. This is the largest systematic review of the outcomes following revision of a RSA. We found an improvement in functional outcomes after revision surgery, but the rates of re-revision and complications are high and warrant consideration when planning a revision procedure. Cite this article: Bone Joint J 2024;106-B(11):1293–1300

Aims. Optimal glenoid positioning in reverse shoulder arthroplasty (RSA) is crucial to provide impingement-free range of motion (ROM). Lateralization and inclination correction are not yet systematically used. Using planning software, we simulated the most used glenoid implant positions. The primary goal was to determine the configuration that delivers the best theoretical impingement-free ROM. Methods. With the use of a 3D planning software (Blueprint) for RSA, 41 shoulders in 41 consecutive patients (17 males and 24 females; means age 73 years (SD 7)) undergoing RSA were planned. For the same anteroposterior positioning and retroversion of the glenoid implant, four different glenoid baseplate configurations were used on each shoulder to compare ROM: 1) no correction of the RSA angle and no lateralization (C-L-); 2) correction of the RSA angle with medialization by inferior reaming (C+M+); 3) correction of the RSA angle without lateralization by superior compensation (C+L-); and 4) correction of the RSA angle and additional lateralization (C+L+). The same humeral inlay implant and positioning were used on the humeral side for the four different glenoid configurations with a 3 mm symmetric 135° inclined polyethylene liner. Results. The configuration with lateralization and correction of the RSA angle (C+L+) led to better ROM in flexion, extension, adduction, and external rotation (p ≤ 0.001). Only internal rotation was not significantly different between groups (p = 0.388). The configuration where correction of the inclination was done by medialization (C+M+) led to the worst ROM in adduction, extension, abduction, flexion, and external rotation of the shoulder. Conclusion. Our software study shows that, when using a 135° inlay reversed humeral implant, correcting glenoid inclination (RSA angle 0°) and lateralizing the glenoid component by using an angled bony or metallic augment of 8 to 10 mm provides optimal impingement-free ROM. Cite this article: Bone Jt Open 2024;5(10):851–857

Introduction. Reverse Shoulder Arthroplasty (RSA) improves the mechanics of rotator cuff deficient shoulders. To optimize functional outcomes and minimize failures of the RSA manufacturers have recently made innovative design modifications with lateralized components. However, these innovations have their own set of biomechanical trade-offs, such as increased shear forces along the glenoid bone interface. The objective of this study was to develop an efficient musculoskeletal model to evaluate and compare both the muscle forces and joint reactive force of a normal shoulder to those implanted with varied RSA implant designs. We believe these findings will provide valuable insight into possible advantages or shortcomings of this new RSA design. Methods. A kinematic model of a normal shoulder joint was adapted from publically available musculoskeletal modeling software. Static optimizations then allowed for calculation of the individual muscle forces, moment arms and joint reactive forces relative to net joint moments. An accurate 3D computer models of humeral lateralized design (HLD) (Equinoxe, Exactech, Gainesville FL, USA), glenoid lateral design (GLD) (Encore, DJO Global, Vista CA, USA), and Grammont design (GD) (Aequalis, Tornier, Amsterdam, NV) reverse shoulder prostheses was also developed and parametric studies were performed based on the numerical simulation platform. Results. As expected, there were decreases in muscle forces in all RSA models (Table 1). These decreases were greatest in the middle deltoid of the HLD model for abduction and flexion (Figure 1) and in the rotator cuff muscles under both internal and external rotation (Figure 2). In all RSA models the muscle forces of the rotator cuff were diminished to near zero in all range of motions. The joint reactive forces in abduction and flexion decreased similarly for all RSA models compared to the normal shoulder model, with the greatest decrease again seen in the HLD model (Table 1). Conclusion. These findings demonstrate that the design characteristics implicit in these modified RSA prostheses result in kinematic differences most prominently seen in the deltoid muscle and overall joint reactive forces. These differences could have a profound effect on the ultimate clinical success and long term outcomes for RSA. These results can help guide continued optimization of RSA design and clinical outcomes. The developed innovative shoulder modeling simulation could serve as a prototype for testing of future implant design concepts

Aims. Conflicting clinical results are reported for the ATTUNE Total Knee Arthroplasty (TKA). This randomized controlled trial (RCT) evaluated five-year follow-up results comparing cemented ATTUNE and PFC-Sigma cruciate retaining TKAs, analyzing component migration as measured by radiostereometric analysis (RSA), clinical outcomes, patient-reported outcome measures (PROMs), and radiological outcomes. Methods. A total of 74 primary TKAs were included in this single-blind RCT. RSA examinations were performed, and PROMs and clinical outcomes were collected immediate postoperatively, and at three, six, 12, 24, and 60 months’ follow-up. Radiolucent lines (RLLs) were measured in standard anteroposterior radiographs at six weeks, and 12 and 60 months postoperatively. Results. At five-year follow-up, RSA data from 61 patients were available and the mean maximum total point motion (MTPM) of the femoral components were: ATTUNE: 0.96 mm (95% confidence interval (CI) 0.79 to 1.14) and PFC-Sigma 1.37 mm (95% CI 1.18 to 1.59) (p < 0.001). The PFC-Sigma femoral component migrated more in the first postoperative year, but stabilized thereafter. MPTM of the tibial components were comparable at five-year follow-up: ATTUNE 1.12 mm (95% CI 0.95 to 1.31) and PFC-Sigma 1.25 mm (95% CI 1.07 to 1.44) (p = 0.438). RLL at the medial tibial implant-cement interface remained more prevalent for the ATTUNE at five-year follow-up compared to the PFC-Sigma (20% vs 3%). RLL did not progress over time, and varied between patients at different timepoints for both TKA systems. Clinical outcomes and PROMs improved compared with preoperative scores, and were not different between groups. Conclusion. MTPM migration at five-year follow-up of the femoral and tibial component of the ATTUNE were similar and as low as that of the PFC-Sigma. MTPM migration of both knee implants did not significantly change from one year post-surgery, indicating stable fixation. Long-term ATTUNE performance may be expected to be comparable to the clinically well-performing PFC-Sigma. We have not found evidence of increased tibial component migration as measured by RSA to support concerns about cement debonding and a higher risk of aseptic loosening with the ATTUNE TKA. Cite this article: Bone Joint J 2023;105-B(11):1168–1176

Purpose. The purpose of this study was to examine the influence of weight-bearing on the measurement of in vivo wear of total knee replacements using model-based RSA at 1 and 2 years following surgery. Methods. Model-based RSA radiographs were collected for 106 patients who underwent primary TKR at a single institution. Supine RSA radiographs were obtained post-operatively and at 6-, 12-, and 24-months. Standing (weight-bearing) RSA radiographs were obtained at 12-months (n=45) and 24-months (n=48). All patients received the same knee design with a fixed, conventional PE insert of either a cruciate retaining or posterior stabilized design. Ethics approval for this study was obtained. In order to assess in vivo wear, a highly accurate 3-dimensional virtual model of each in vivoTKA was developed. Coordinate data from RSA radiographs (mbRSA v3.41, RSACore) were applied to digital implant models to reconstruct each patient's replaced knee joint in a virtual environment (Geomagic Studio, 3D Systems). Wear was assessed volumetrically (digital model overlap) on medial and lateral condyles separately, across each follow-up. Annual rate of wear was calculated for each patient as the slope of the linear best fit between wear and time-point. The influence of weight-bearing was assessed as the difference in annual wear rate between standing and supine exams. Age, BMI, and Oxford-12 knee improvement were measured against wear rates to determine correlations. Results. Weight bearing wear measurement was most consistent and prevalent in the medial condyle with 0–4% of calculated wear rates being negative compared to 29–39% negative wear rates for the lateral condyle. For the medial condyle, standing exams revealed higher mean wear rates at 1 and 2 years; supine, 16.3 mm. 3. /yr (SD: 27.8) and 11.2 mm. 3. /yr (SD: 18.5) versus standing, 51.3 mm. 3. /yr (SD: 55.9) and 32.7 mm. 3. /yr (SD: 31.7). The addition of weight-bearing increased the measured volume of wear for 78% of patients at 1 year (Avg: 32.4 mm. 3. /yr) and 71% of patients at 2 years (Avg: 48.9 mm. 3. /yr). There were no significant (95% CI) correlations between patient demographics and wear rates. Discussion and Conclusion. This study demonstrated TKA wear to occur at a rate of approximately 10 mm. 3. /year and 39 mm. 3. /year in patients imaged supine versus standing, respectively, averaged over 2 years of clinical follow-up. In an effort to eliminate the effect of PE creep and deformation, wear was also calculated between 12 and 24 months as 9.3 mm. 3. (standing examinations), This value is comparable to wear rates obtained from retrieved TKRs. Weight-bearing exams produced better wear data with fewer negative wear rates and reduced variance. Limitations of this study include: supine patient imaging performed at post-op, no knee flexion performed, and unknown patient activity level. Strengths of this study include: large sample size of a single TKR system, linear regression of wear measurements and no requirement for implanted RSA beads with this method. Based on these results, in vivo volumetric wear of total knee replacement polyethylene can be reliably measured using model-based RSA and weight-bearing examinations in the short- to mid–term. For any figures or tables, please contact authors directly

The philosophy of cemented total hip arthroplasty (THA) femoral components has become polarised. At one extreme are polished, collarless, tapered devices that are expected to subside; at the other extreme are roughened, non-tapered implants with a collar designed not to subside. Radiostereometric analysis (RSA) allows the accurate measurement of implant movement and has been extensively used for measurement of the in vivo migration of implants. The degree of migration as measured by RSA during the first years after surgery has been shown to correlate with the long-term performance of cemented femoral implants. The purpose of this study was to review the two-year RSA results of two different designs of primary cemented THA stems. Data from two previous prospective RSA trials with two-year follow-up were pooled. The first group included 36 patients who received a Spectron (Smith & Nephew, Memphis, USA) cemented stem. The second group included 13 patients who received an Exeter (Stryker, Mahwah, USA) cemented stem, and 15 patients who received a CPCS (Smith & Nephew, Memphis, USA) cemented stem. All patients underwent RSA examinations shortly post-operation, at 6 weeks, 3 months, 6 months, 1 years, and 2 years. Migration and rotation of the femoral stems was measured at each time point relative to the post-operative exam, and compared between the two groups. There was no difference in age at surgery (Spectron 78 ± 6 years, Exeter/CPCS 77 ± 5 years, p = 0.43), BMI (Spectron and Exeter/CPCS 28 ± 5 kg/m2, p = 0.92), or percentage of male patients (Spectron 23% male, Exeter/CPCS 21% male) between the implant groups. Subsidence was significantly greater (p < 0.0001) at all time points from three months to two years for the Exeter and CPCS stems (0.94 ± 0.39 mm at two years) compared to the Spectron stem (0.05 ± 0.16 mm at two years). There was no significant difference between the stem types for medial-lateral translation (p = 0.07) or anterior-posterior translation (p = 0.49), or for anterior-posterior tilt (p = 0.15), internal-external rotation (p = 0.89), or varus-valgus rotation (p = 0.05). Implant material, design, and surface finish are all factors in the long-term performance of cemented femoral hip implants. In this study, both femoral stem designs had a magnitude of sub-sidence that was within the limits of what is considered to be safe with respect to long-term performance. The continuous subsidence of the Exeter and CPCS stems is consistent with previous reports in the literature

Roentgen stereophotogrammetric analysis (RSA) is a tool that can provide quantitative information for objective evaluation and comparison of implant migration. The purpose of this study was to develop and validate a new method to determine the position and orientation of an implant with RSA that does not require the implant modification or acquisition of accurate 3D implant models. This method utilizes information from certain common features of implant geometry. This method has demonstrated in-vitro precision and accuracy of 0.005 !0.059 mm in position and 0.09 ! 0.166° in orientation which is equivalent to both marker and model based RSA methods. Roentgen stereophotogrammetric analysis (RSA) is a tool that can provide quantitative information for objective evaluation and comparison of implant migration. RSA measures have demonstrated the ability to both predict premature implant failure before clinical or standard radiological signs appear, and to elucidate implant wear which is considered a major causal factor in failure. To provide this functionality, RSA requires either the modification of each implant by the addition of spherical markers or the acquisition of accurate 3D models of each implant. These approaches can significantly limit the application of the RSA method. The purpose of this study was to develop and validate a new method to determine the position and orientation of an implant with RSA that does not require the modifying or acquiring accurate 3D models of each implant. This method is based on the geometric inter-relationship between the pair of RSA images and geometric information from the projected outlines of certain paired (visible in both views) features of implant geometry. Evaluations were performed on a metallic acetabular cup modified with spherical markers. The implant features used in this case where the hemispherical shell and the planar circle at the base of the acetabular cup. This method has demonstrated an average in-vitro precision and accuracy of 0.005 !0.059 mm in position and 0.09 ! 0.166° in orientation which was equivalent to that achieved with the marker based method and equivalent to published model based RSA results. Funding: NSERC, GEOIDE, University of Calgary

Aims. This study aimed to assess the impact of using the metal-augmented glenoid baseplate (AGB) on improving clinical and radiological outcomes, as well as reducing complications, in patients with superior glenoid wear undergoing reverse shoulder arthroplasty (RSA). Methods. From January 2016 to June 2021, out of 235 patients who underwent primary RSA, 24 received a superior-AGB after off-axis reaming (Group A). Subsequently, we conducted propensity score matching in a 1:3 ratio, considering sex, age, follow-up duration, and glenoid wear (superior-inclination and retroversion), and selected 72 well-balanced matched patients who received a standard glenoid baseplate (STB) after eccentric reaming (Group B). Superior-inclination, retroversion, and lateral humeral offset (LHO) were measured to assess preoperative glenoid wear and postoperative correction, as well as to identify any complications. Clinical outcomes were measured at each outpatient visit before and after surgery. Results. There were no significant differences in demographic data and preoperative characteristics between the two groups. Both groups showed significant improvements in patient-reported outcome measures (visual analogue scale for pain, visual analogue scale for function, American Shoulder and Elbow Surgeons, Constant, and Simple Shoulder Test scores) from preoperative to final assessment (p < 0.001). However, AGB showed no additional benefit. Notably, within range of motion, Group B showed significant postoperative decrease in both external rotation and internal rotation, unlike Group A (p = 0.028 and 0.003, respectively). Both groups demonstrated a significant correction of superior-inclination after surgery, while patients in Group B exhibited a significant decrease in LHO postoperatively (p = 0.001). Regarding complications, Group A experienced more acromial stress fractures (3 cases; 12.5%), whereas Group B had a higher occurrence of scapular notching (24 cases; 33.3%) (p = 0.008). Conclusion. Both eccentric reaming with STB and off-axis reaming with AGB are effective methods for addressing superior glenoid wear in RSA, leading to improved clinical outcomes. However, it is important to be aware of the potential risks associated with eccentric reaming, which include excessive bone loss leading to reduced rotation and scapular notching. Cite this article: Bone Joint J 2024;106-B(3):268–276

The Birmingham reSurfacing Arthroplasty (BSA) is a metal on metal prosthesis with no published independent clinical studies. Despite this, it is increasing in popularity, especially as an alternative to stemmed prostheses in younger patients. This study presents the 1year migration results of the BSA femoral component using Roentgen Stereophotogrammteric Analysis (RSA). Twenty six subjects underwent a BSA, through the postero-lateral approach using CMW3G cement, with RSA marker balls placed intra-operatively. The femoral component migration was measured at intervals of 3, 6 and 12 months using the Oxford RSA system. Geometric algorhythms were used to identify the femoral component. The data was examined for distribution prior to analysis. All statistical analysis was performed using the t-test. The data was normally distributed. The 1 year migration results of the BSA femoral component are displayed below. All cemented implants migrate in vivo. The majority of cemented stemmed implant migration occurs within the first post-operative year. High rates of migration within the first post-operative year correlate with premature component failure in some instances. The BSA is a fundamentally different design to most cemented prostheses, despite this we know that very large migrations, those in excess of 2mm/year in any direction are generally regarded as poor indicators of long term outcome. These results suggest that the BSA femoral component is an inherently stable device as it does not migrate significantly within the first post-operative year. Only long-term independent clinical studies and continued RSA follow-up will enable a comprehensive evaluation of the device

Purpose: Radiostereometric Analysis (RSA) is used to measure migration and inducible displacement (ID) of orthopedic implant devices to allow early prediction of implant failure (eg. Aseptic loosening). Total Ankle Arthroplasty (TAA) is used for the treatment of end-stage ankle arthritis. First generation TAA implant have meet with widespread failures while some second generation TAA implants are showing improved results. In this study RSA is used to evaluate the biomechanical properties of a new third generation TAA implant in an attempt to set a standard for the biomechanical evaluation on TAA implants in-vivo. Method: Patients undergoing TAA were enrolled consecutively (n=12; 7 males; mean age=59 years; mean BMI=29) and had 8 markers (0.08mm) inserted in both the tibia and talus during surgery. Standing, weight-bearing RSA exams were performed at 3 and 6 months and compared to concurrent supine exams to determine component ID. Results: For tibial components: at six months the components had translated posteriorly (0.3mm±0.5) and proximally (0.5mm±0.2), tilted into varus (0.5°±1.3), and tilted posteriorly (0.4°±0.8). The magnitudes of ID for the tibial components were moderate (mean < 0.2mm and 0.5°, standard deviation < 0.3mm and 2.2° in each direction). For talar components: at six months the components had translated distally (0.28mm±0.35), rotated internally (0.21°±1.32) and tilted posteriorly (0.15°±0.90). There was varus/valgus tilt measured in the talar components but there was no consistent direction of migration (0.03°±1.4). At six months the magnitudes of ID for the talar components were small (mean < 0.1mm and 0.25°, standard deviation < 0.2mm and 0.6° in each direction). Conclusion: An RSA methodology has been established to predict stability

Introduction. In vitro studies showed that the anti-oxidative properties of vitamin E stabilize free radicals while retaining the mechanical strength of UHMWPE. The purpose was to evaluate vitamin E diffused polyethylene (VEPE) wear and stability of femoral components using RSA. Patient reported outcome measures (PROMs) were evaluated to determine the clinical outcome at 5 years. Methods. 48 patients (52 hips), with osteoarthritis, participated in a 5 year RSA study. Each patient received a VEPE liner, a porous titanium coated shell, and an uncemented stem with a 32mm head. Tantalum beads were inserted into the VEPE and the femur to measure head wear and stem stability using RSA. RSA and PROM follow-up was obtained postoperatively, 6 months, 1, 2, 3, and 5 years after surgery. The Wilcoxon signed-ranks test determined if changes in penetration or migration were significant (p≤0.05). Results. 47 hips were followed at 3 years, and 35 at 5 years. The median± standard error (SE) superior head penetration into the polyethylene was 0.05±0.01mm at 3 years and 0.06±0.01 mm at 5 years. There was no difference after 2 years. The median± SE distal stem migration was 0.06±0.21mm at 3 years, and 0.06±0.29mm at 5 years with no significant differences over time. All PROMs improved significantly from the preoperative to all other intervals (p<0.001 for all). Discussion. The VEPE liners show low head penetration at 5 years. The early head penetration, probably due to creep, is lower relative to that reported for non-VEPE measured by RSA. While most stems were stable, the high standard error results from one stem that migrated substantially by 6 months (9.4mm), which has since stabilized. This study documents the longest-term evaluation of in vivo wear performance of vitamin E stabilized UHMWPE. The low wear and the stability of the femoral stem shows promise for long-term survivorship

Introduction: In postmenopausal female patients with hip osteoarthritis, osteoporosis as well as altered local trabecular bone architecture may lead to a increased migration of uncemented hip prostheses. 1. ,. 2. The aim of this study was to determine whether 3D bone architecture and mechanical properties of intertrochanteric cancellous bone in the proximal femur predict RSA migration of uncemented femoral stems. Materials and Methods: The study population consisted of 61 female patients with primary hip osteoarthritis. Informed consent was obtained prior to any study-related procedures. The Ethical Committee approved the study protocol. All patients underwent a total hip replacement (ABG II, Stryker) with uncemented proximally hydroxyapatite-coated femoral stem with tantalum RSA markers. Ceramicceramic bearing surfaces were used. A uniplanar type of RSA setup was applied. The RSA examinations were performed postoperatively and at 3, 6, and 12 months. During surgery, cancellous bone biopsy was taken from the proximal femur from the site of stem implantation. The specimens were scanned with micro-CT. 3D analysis of trabecular bone geometry and BMD was performed using CTAn software. After micro-CT imaging, the trochanteric cancellous bone specimens were subjected to a destructive compression test. Maximum force and stiffness were calculated. Linear regression analysis was applied to study correlations between different parameters investigated. Results: The patients exhibited major differences in the density and structural quality of intertrochanteric cancellous bone. Significant correlations were found between the measured biomechanical parameters and the structural parameters calculated from micro-CT data. Unexpectedly, the quality of intertrochanteric cancellous bone did not predict RSA migration of the femoral stems. The femoral stems reached high stability within 3 months and there were no significant differences in the axial and rotational migration of the femoral stems between the patients with normal or poor quality of the intertrochanteric cancellous bone. Discussion: The 3D bone architecture, mineral density and mechanical properties of the local intertrochanteric cancellous bone do not seem to serve as predictors of femoral stem migration. The observation suggests that the significance of cancellous bone quality for the initial stability of uncemented femoral stems has been over-emphasized

The use of roentgen stereophotogrammetric analysis (RSA) in the assessment of total hip arthroplasty is well recognised as an accurate technique in the measurement of small movements of implants. The technique requires the insertion of tantalum beads into a stable location in the bone at the time of surgery. Failure of bead insertion leads to unstable extra-osseous beads that require to be excluded from the analysis. Previous studies have reported an incidence of extra-osseous beads in the proximal femur of between 2% and 13%. In order to further improve the accuracy of the RSA technique, we have developed a test criterion for exclusion of unstable osseous beads in RSA of total joint replacements. Using specifically developed software each bead’s movement was determined relative to the rest of the beads in the bone segment. The bead movement was determined for radiologically identified extra-osseous beads, which were assumed loose, and for the remaining intra-osseous beads which were suitable for analysis. Analyses with a condition number greater than 100 were rejected. The rate of motion was calculated from consecutive examinations. Unstable beads were identified as those having a median rate greater than a given threshold. The sensitivity and specificity for detecting extra-osseous beads was calculated for different thresholds of median bead motion. In 149 RSA hip study patients, 43 extra-osseous beads that could be analysed were identified and a group of 36 osseous beads were selected as a control group. This resulted in an optimum threshold of 0.36mm that gave a sensitivity of 89% and a specificity of 86% for detecting unstable (extra-osseous) beads. The remaining 1428 beads, which were assumed to be osseous, were then tested with this threshold, which gave a sensitivity of 84% and a specificity of 79%. The median extra-osseous bead rate of movement at 6, 12, 18 and 24 months were 2.24, 0.78, 1.03 and 1.31mm respectively and for osseous beads were 0.27, 0.19, 0.18 and 0.19mm. As both groups of beads appear to show a “bedding in” period, with a higher median bead movement in the first 6 months, the test was repeated with the first 6 month period excluded from the criteria. An optimal threshold of 0.37mm was found to have a sensitivity of 73% and a specificity of 87% for identifying an extra-osseous bead. While most radiographically classified osseous beads identified as unstable may be false-positives, it is probable that some are extra-osseous but not visibly so on radiographs. The specificity of this technique is likely to be further improved with the increased precision from digital scanning techniques. Tantalum beads in general appear to be relatively unstable in the first 6 months, consistent with the expected osteo-intergration of the bead. This new criterion for bead instability allows automatic exclusion of unstable beads increasing the reliability of the RSA technique both in future studies and retrospectively to existing data

Reverse shoulder arthroplasty (RSA) was released into the United States market in 2004 for the indication of Rotator Cuff Tear Arthropathy. Since that time the indications have widened and now include massive rotator cuff tears that are not deemed to be surgically repairable. This diagnosis includes patients that are considered young in terms of shoulder replacement surgery. These patients do not have the radiographic changes of arthropathy, but most have undergone multiple surgical procedures in the past to attempt to repair the rotator cuff deficiency. These younger patients have a different post-op expectation than the patient with advanced arthropathy over the age of 70. The complication rate seen in this younger patient population is higher than seen in the older population undergoing RSA. The post-operative survey for satisfaction is also considerably lower in the younger population group. RSA for massive rotator cuff tears in a younger population under the age of 65 years gives a lower patient satisfaction result and a higher complication rate than age-matched patients older than 65 years. Although this is still the best procedure available for this difficult diagnosis, patients younger than 65 years should be consulted as to what their expectations are post-operatively. Pain relief is still the main reason to undergo an RSA

Introduction: Some reports have suggested an unacceptable failure rate of Elite Plus stem in the medium term. We have previously argued that other measurements must be made in addition to RSA in order to assess reasons for abnormal migrations. This 3-year RSA study of Elite Plus stems assessed the migration pattern and factors that influenced it. Method: Twenty five patients (23 OA, 2 RA, mean age 60.4 years (37–81)) underwent Elite Plus THR (single surgeon). A-P radiographs were assessed for cementing technique, and measurements (canal widths, stem orientation, cement thickness etc) were taken using CAD software. Activity score and BMI were also recorded. Multiple factors were assessed for correlation with the main components of migration. Results: One patient’s stem centroid migrated proximally (due to valgus rotation about the shoulder) and the mean subsidence of the others was 0.297 mm at 36 months. Mean internal rotation and posterior head migration (25 patients) at that time were: 1.42° (CI: 0.99° to 1.86°) and 0.801 mm (CI: 0.526 mm to 1.076 mm), neither being significantly different from migrations at 24 months. One patient’s stem migrated continuously. By 36 months, it had subsided 1.279 mm and internally rotated 4.2°. Some significant correlations (p < 0.05, rho > 0.6) were 3M and 36M subsidence with proximal-medial cement thickness; effective offset with 36M medial migration. Discussion: The one patient with continuous high migration had the highest activity level. This was corroborated by a wear measurement of 3.5 mm in the contralateral (Charnley) hip which had been in place for 9 years (assuming the head was not scratched). If RSA, 3 years postoperatively, can predict future outcome, the 4% failure rate is similar to the ten year results of the Charnley hip

Introduction: Interest in hip resurfacing has recently been renewed by the introduction of metal-on-metal designs; it is being increasingly used for young patients, with over 30,000 implanted worldwide. The 5 year clinical results appear promising, but there are no long term data available. Radiostereometry (RSA) measures of implant migration have been able to predict implant failure; specifically large and continuous migration predicts aseptic loosening. We present the results of a five year RSA study examining the migration of the Birmingham Hip Resurfacing (BHR). Methods: Twenty-four subjects with primary OA were implanted with the BHR device and with bone markers for RSA. RSA measurements were taken at 3, 6, 12, 24 and 60 months. The migration of the head and the tip of femoral component were measured in 3D. Results: Preliminary analysis showed that the total 3D migration of the head and tip over five years was 0.32mm and 0.23mm respectively. Discussion: A distal migration of more than 0.4mm over 2 years increases the likelihood of failure in conventional stems. The total migration of the BHR was approximately 0.3mm over a five year period, significantly less than cemented THR devices. The device is stable and this is promising for long-term survival