Recently, new metallurgical techniques allowed the creation of 3D metal matrices for cementless acetabular components. Among several different products now available on the market, the Biofoam Dynasty cup (MicroPort Orthopedics® Inc., Arlington, TN, USA) uses an ultraporous Titanium technology but has never been assessed in literature. Coping with this lack of information, our study aims to assess its radiological osteointegration at two years in a primary total hip arthroplasty and compares it to a successful contemporary cementless acetabular cup.

This monocentric retrospective study includes 96 Dynasty Biofoam acetabular components implanted between March 2010 and August 2014 with a minimum 2 years radiographic follow-up. Previous acetabular surgery, any septic issue or re-operation for component malposition were exclusion criteria. They were compared to 96 THA using the Trident PSL matched for age, gender, BMI and follow-up. Presence of radiolucencies and sclerotic lines were described on AP pelvis views using the classification of DeLee and Charnley

There was no statistical difference between the two groups concerning demographics and mean follow-up (p> 0.05). Shell's anteversion was similar but inclination was greater in the biofoam group (p=0.006). 27,17% of the Biofoam shells presented radiolucencies in 2 zones or more and 0% of the Trident shells. 11,96% of Biofoam cups showed radiolucencies in the 3 zones of DeLee comparing to 0% of the Trident cups. There was no statistical difference between the Biofoam group (n=54/96) and the Trident PSL group (n=57/96) in pre-operative functional scores for both WOMAC subscales and SF-12. When evaluating last follow-up PROM's, no significant differences were found comparing the entirety of both groups, 56 Biofoam and 51 Trident PSL. No difference was found either when comparing Biofoam patients with ³ 2 zones of radiolucencies (n=15) to the whole Trident group (n=51).

This study raises concerns about radiologic evidence of osteointegration of the Biofoam acetabular cup. Nevertheless, these radiological findings do not find any clinical correlation considering clinical scores. Thus, it may question the real meaning of these high-rated radiolucencies, which at first sight reflect a poorer osteointegration. The first possible limitation with this study is an overinterpretation of the radiographs. Nevertheless, both observers were blinded regarding the patients groups and clinical outcomes and there was a strong inter-observer reliability. Although both cohorts were matched on their demographics and were similar on the cup anteversion, we noticed a slightly lower abduction angle in the Biofoam population. It could reduce the bone-implant coverage area and hence hinders the bony integration, but this difference was small and both groups remained in the Lewinneck security zone. Furthermore, even if patients were matched on age, gender, BMI and follow-up, other variables can influence early osteointegration (smoke status, osteoporosis) and have not been controlled even though we have no reasons to think their distribution could differ in the 2 groups.

The real clinical meaning of these findings remains unknown but serious concerns are raised about the radiographic osteointegration of the Dynasty Biofoam acetabular components. Concerns are all the more lawful that this implants aim to enhance osteointegration.

Total Elbow Replacements are indicated for pain and disability in patients with rheumatoid and osteoarthritis of the elbow. The quality of the cementation has been specifically studied and shown to be directly related to the clinical outcome and implant survival.

Introduction

Pelvic and acetabular injuries are relatively rare and surgical reconstruction usually occurs only in specialist centres. As part of their work up there is a local protocol for radiological investigations including Judet oblique views for acetabular fractures, pelvic inlet and outlet for pelvic ring fractures and urethrograms for sustaining anterior pelvic injury. The aim of this service evaluation was to assess whether patients had these radiological investigations prior to transfer.

In older patients (>75 years of age), with an intact rotator cuff, requiring a total shoulder replacement (TSR) there is, at present, uncertainty whether an anatomic TSR (aTSR) or a reverse TSR (rTSR) is best for the patient. This comparison study of same age patients aims to assess clinical and radiological outcomes of older patients (≥75 years) who received either an aTSR or a rTSA. Consecutive patients with a minimum age of 75 years who received an aTSR (n=44) or rTSR (n=51) were prospectively studied. Pre- and postoperative clinical evaluations included the ASES score, Constant score, SPADI score, DASH score, range of motion (ROM) and pain and patient satisfaction for a follow-up of 2 years. Radiological assessment identified glenoid and humeral component osteolysis, including notching with a rTSR. Postoperative improvement for ROM and all clinical assessment scores for both groups was found. There were significantly better patient reported outcome scores (PROMs) in the aTSR group compared with the rTSR patients (p<0.001). Both groups had only minor osteolysis on radiographs. No revisions were required in either group. The main complications were scapular stress fractures for the rTSR patients and acromioclavicular joint pain for both groups. This study of older patients (>75 years) demonstrated that an aTSR for a judiciously selected patient with good rotator cuff muscles can lead to a better clinical outcome and less early complications than a rTSR

Introduction. We describe five results of a novel single stage arthroscopic technique for the treatment of articular cartilage defects of the knee. This involves micro drilling and application of Atelo-collagen (Coltrix) and fibrin gel scaffold. Materials and Method. The preclinical study involved two groups of rabbits treated with micro-drilling, and micro-drilling with Atelo-collagen and fibrin gel. New cartilage was subjected to staining with H&E for tissue morphology, toluidine blue (collagen) and safranin O (GAG), immunohistochemistry with antibodies for collagen type I and II, and scanning and transmission electron microscopy to analyse the microstructural morphologies. The micro-drilling with Atelo-collagen, fibrin gel scored better than the micro-drilling alone. Patients (n=30) with symptomatic ICRS grade III/IV chondral defects (lesion size 2–8cm. 2. ) are recruited for this prospective study. The surgical procedure involved micro-drilling and application of Atelo–collagen and fibrin gel under CO. 2. insufflation. Patients underwent morphological evaluation with MRI (T2*-mapping and d-GEMRIC scans). Clinical assessment was done with Lysholm, IKDC and KOOS scores. Radiological assessment was performed with MOCART score. Results. At five years, Lysholm score was 74, compared to 49 pre-operatively (p<0.05). KOOS (symptomatic) improved to 92 from 62 (p<0.05). IKDC (subjective) went to 78 from 40 (p<0.05). The mean T2* relaxation-times for the repair tissue and native cartilage were 26 and 29.9 respectively. Average MOCART score for all lesions was 70. Conclusion. This technique shows encouraging clinical results at five-year follow-up. The morphological MRI shows good cartilage defect filling and the biochemical MRI suggests hyaline like repair tissue

Introduction. We describe a single stage arthroscopic procedure for the treatment of articular cartilage defects in the knee. The novel procedure involves microdrilling and application of atellocollagen and fibrin gel. The aim of the study was to evaluate the clinical outcomes at 4 years. Materials and Methods. A prospective study of 30 patients with symptomatic ICRS grade III/IV chondral defects which were assessed clinically and radiologically. The lesions were located on the MFC, LFC, trochlea or patella, ranging from 2–8cm2. The surgical procedure involved debridement of the lesion, microdrilling and application of atellocollagen and fibrin gel under CO2 insufflation. Patients were clinically assessed using the Lysholm, IKDC and KOOS scores. Radiological assessment used the MOCART score. Results. At 4 year follow-up:. Lysholm score was 80.46 ± 24.7, up from 51.7 ± 27.1 pre-operatively (p < 0.05). KOOS (symptomatic) was 89, up from 66.2 pre-operatively. IKDC (subjective) was 78.6, up from 41 preoperatively. MOCART score for all lesions was 71.3. The mean T2* relaxation-times for the repair tissue and native cartilage were 28.8 and 29.7 respectively. dGEMRIC scan suggests hyaline like repair tissue. Conclusion. Our technique shows encouraging results at 4 year follow-up as assessed by reliable validated scores and qualitative MRI scans

Arthrodesis of the first metatarsophalangeal joint (MTPJ) has been reported as gold standard for the treatment of advanced hallux rigidus and is a well-documented procedure. However, many patients demand a mobile MTPJ and therefore joint sparing procedures like MTPJ-arthroplasty have gained popularity. The aim of the present study was to present first mid-term results after hemiarthroplasty to treat advanced osteoarthritis of the first MTPJ. Between April 2006 and October 2013, a total of 81 hemiprostheses (AnaToemic®, Arthrex) in 71 consecutive patients (44 females, 27 male, 10 bilateral; mean age, 58 [range, 45–82]) were implanted at the St. Vincent Hospital Vienna (Austria). The indication for surgery was persistent MTPJ pain after failed conservative treatment combined with radiologic evidence of osteoarthritis (advanced hallux rigidus grade II-IV). Patients were clinically examined using the American Orthopaedic Foot and Ankle Society (AOFAS) score before surgery and at the final follow-up visit. Patient's satisfaction with the treatment was recorded. Radiological results were evaluated using standard x-rays and revision surgeries were documented. The mean preoperative AOFAS Scores significantly increased from 51 to 88 points after an average follow-up duration of 5 years (p<0.001). Most patients (76%) were either very satisfied or satisfied with the procedure. Radiological assessment showed some kind of radiolucencies on the base plate, whereas the stem of the prosthesis was well integrated in most of the cases; however clinical outcome was not affected by minor radiolucent lines on the base plate. In the majority of patients the implant was in situ at last follow-up. If revision surgery, due postoperative pain or implant loosening, was required; it occurred within 12 to 36 months. According to our promising mid-term results with a MTPJ-hemiprostheses, we conclude that MTPJ-arthroplasty is an effective alternative treatment modality for anatomical reconstruction of the first MTPJ with the benefit to reduce pain and maintain mobility

In the past century several shoulder reconstruction systems with different types of prostheses and fixation methods have been developed to improve shoulder arthroplasty, especially to cover a wide range of pathologies and revision situations. The aim of this prospective trial was to report clinical and radiological mid-term results of a stemless humeral head replacement with metaphyseal hollow screw fixation. A consecutive series of 147 shoulders in 138 patients (84 female, 54 male; mean age of 67 years, range 40–84) undergoing stemless humeral head arthroplasty were considered for this single-centre trial. We prospectively followed 120 shoulders (40 hemi- and 80 total-arthroplasties) for an average of five years or until a reoperation. Patient's clinical and functional outcome was evaluated according to the Constant score and active range of motions (ROM) was measured. Patient's satisfaction with the treatment was evaluated. Additionally, operating times and complications were recorded. Radiological assessment for radiolucencies or implant migration was performed. The mean Constant score significantly increased from 35 points preoperatively to 62 points at the last follow-up (p<0.001). All subcomponents (pain, daily activity, ROM, strength) of the Constant score were significantly (p<0.001) higher at follow-up. Active flexion improved from 90° to 150° (p<0.001), active abduction from 78° to 120° (p<0.001), and active external rotation from 20° to 40° (p<0.001) between preoperative and last clinical assessment. Furthermore, 54% of the patients were very satisfied, 34% satisfied, and 12% unsatisfied. Operating times of the new stemless prosthesis were significantly shorter compared to a stemmed prosthesis. Over the follow-up period, all humeral head components were radiological centred, changing radiolucencies were detected; however no implant loosening occurred. Revision surgery for implant loosening only occurred in the metal-backed glenoid component with hollow screw fixation; otherwise no complication due to implant loosening was detected. The promising five-year results suggest that the concept of this stemless humeral head replacement might be an expedient alternative to existing shoulder replacements. Anatomical cutting of the humeral head and hollow screw fixation allow a familiar access to the glenoid combined with a shaft independent, less complex bone-sparing surgery along with shorter operating times and favourable revision situation

Introduction and Aim. The management of grade 4 articular cartilage defects of the knee is a great challenge and surgical techniques are evolving. This single surgeon series evaluated the results of articular cartilage implantation using matrix assisted autologous cartilage implantation (B Braun, Tetec, Reutlingen Germany) in 28 patients who had failed previous micro-fracture or chondroplasty. Material and methods. Patients with a single chronic symptomatic full thickness defect either on the femoral condyle, trochlea or the patella were included. The defect size varied from 2.5 cm2 to 9.6 cm2. The mean age was 41.3 years and the mean duration of symptoms prior to surgery was 27 months (6–96). Functional outcome was evaluated using the IKDC, KOOS, Tegner Lysholm and VAS pain scores. Patients also quantified their improvement in percentage or descriptive terms. Radiological assessment was carried out using MRI. Results. At a mean follow up of 14 months (12 to 39) there was significant improvement in the IKDC from median 32.2 to 89.2 (p<0.001); KOOS from median 32.20 to 91.2 (p <0.001); Tegner-Lysholm from median 36 to 89 (p<0.001). VAS improved from a median of 1 to 9 post surgery. All patients had subjective improvement of a minimum of 85%. There were no complications in this study. Conclusion. The study shows that articular cartilage implantation using this technique yields excellent results in symptomatic patients following failed micro-fracture or chondroplasty. Careful patient selection and rehabilitation are however paramount in achieving success

Aims

Chronic osteomyelitis (COM) of the lower limb in adults can be surgically managed by either limb reconstruction or amputation. This scoping review aims to map the outcomes used in studies surgically managing COM in order to aid future development of a core outcome set.

Introduction. The aim of our study was to compare the radiographic alignment unicompartmental knee arthroplasty (UKA) with using conventional non-navigation technique and computer-assisted navigation technique. Our study was focused on bearing alignment on clinical outcome of knee. Materials and Methods. In our department we have performed between January 2005 and December 2012 106 UKA. All patients were examined clinically and radiologically before and after operation. There were implanted two types of UKA, 67 of UKA were performed by The PRESERVATION™ (DePuy) with navigation and 39 UKA Oxford® Partial Knee (Biomet.) were performed by conventional technique. In our study we have evaluated 104 of medial UKA divided to groups, 65 implantation of The PRESERVATION™ and 39 implantation of Oxford® Partial Knee UKA. We have evaluated 101 patients, 61 women, 40 men, average age 66,5 (50–82) years. Firstly we performed measurement of parameters determine alignment UKA. These values were written down and the deviation of norm was established. Results were divided in two groups, one with values of normal range and the second beyond normal range. Values of all UKA were matched with clinical outcome postoperatively. This assessment was performed by The Knee Society Clinical Rating System (Knee score). Results. The mean follow-up was 3,3 (max. 7,1) years. The group with navigation technique improved Knee score from mean 58 (41–79) preoperatively to 93 (62–100) postoperatively. Conventional UKA Knee score improved from 56 (39–77) preoperatively to 91 (61–100) postoperatively. Clinical outcome is comparable in both groups. Radiological assessment of alignment unicompartmental knee replacement according to our measurement results in favour of computer-assisted navigation. Conclusion. Computer-assisted navigation enables more exact alignment of the femoral and tibial component than conventional technique. In spite of the fact that difference clinical outcome is comparable

Introduction. There is no consensus on the ideal management of young, active patients with disabling coxarthrosis. Within this group, patients with femoral head defects secondary to cysts or avascular necrosis pose particular challenges. Resurfacing arthroplasty is contraindicated and the results of traditional total hip arthroplasty are suboptimal in this group. The BMHR was designed to offer a bone conserving option for these patients. We report the outcome of this device in the short term. Methods. This prospective study examines the clinical and radiological outcome of a consecutive series of patients treated with the BMHR arthroplasty. All patients had femoral head defects and disabling hip pain. Patients were reviewed pre operatively and then at 6 weeks, 12 weeks, and 1year post operatively and then yearly. Oxford, Harris and WOMAC hip scores were calculated at each review. Radiological assessment was also performed at each follow up. Results. Forty one patients were included (28 males, 13 females). Average age was 48.0 years (3.8 to 65.1 years). All patients participated in 2 or more sporting activities. Average follow up was 12 months (3–19). Pre and post operative OHS, HHS and WOMAC scores were 34, 46 and 42 and 18, 91 and 6 respectively (p< 0.0001 in all cases). There were no complaints of pain or reduced function at last follow up and there were no revisions or pending revisions up to last follow up. All components were well fixed radiographically. Discussion. The BMHR arthroplasty has shown good early results in treatment of young, active patients with femoral head defects. It seems to offer a resurfacing option in this group with the inherent benefits of improved stability and while allowing preservation of femoral bone stock. There is also the potential for a technically less demanding future revision on the femoral side

Introduction. the aim of the study is to evaluate the clinical results of the shoulder prosthesis revision procedure to reverse implant without removing the humeral stem using a modular system (Lima LTD) and determine if this procedure is beneficial for the patients. Methods. e selected only the patients where a revision to reverse (RSA) of hemiarthroplasty (Hemi) originally implanted for fracture (Group I) and revision to reverse (RSA) of anatomical total prosthesis (TSA) were performed. From 2004 to 2009 26 cases responding to these parameters were identified: 18 cases in Group I (failed hemiarthroplasty for tuberosities resorptions or rotator cuff failure) and 8 in Group II (failed TSA for rotator cuff omplication). The mean follow-up was 32 months (min 18–max 76) and the mean age was 72 (min 65–max 80). Clinical assessment was performed with preoperative and postoperative Constant score rating scale (CS) and range of motion evaluation (ROM). Radiological assessment was performer by AP and Axial X-ray views. Operative time was calculated. Results. overall pre-op CS was 24 (min 18–max 30), post-op CS was 47,8 (min 35–max 60). In Group I the mean improvement of CS was 25,3; in Group II was 17. All patients had a clinical improvement of the range of motion. X-Rays study did not show radiolucent lines related to implant mobilization. No major complications were observed in all the cases. Discussion and Conclusion. Revision surgery for failed Hemi or TSA is commonly related to a relatively increase of complication and/or poorer out come if compared to a primary RSA implant. Our study results demonstrate that using a full modular system from the first implant allows to skip the humeral stem removal/reimplant step in case of conversion of a shoulder prosthesis to a reverse with good clinical result, no radiological signs of mobilization and non major complication probably related to a shorter and less aggressive operative time and procedure

We aimed to review the outcome of Agility total ankle replacements carried out in our institution between 2002 and 2006. Follow-up consisted of clinical and radiological review pre-operatively, then at 6 weeks, 6 and 12 months, and annually until 10 years post op. Clinical review included the American Orthopaedic Foot and Ankle Score, satisfaction and pain scores. Case notes were reviewed to determine intra and post-operative complications. 30 arthroplasties were performed in 30 consecutive patients. Pre-operative diagnosis was rheumatoid arthritis(16), primary osteoarthritis(12) and post-traumatic osteoarthritis(2). After a mean follow up of 6.2 years (1.4–10.1), 4 patients had died, and 22 out of the remaining 24 were available for follow-up. Intra operative complications included lateral malleoli fracture(3) and superficial peroneal nerve injury(2). Post operative complications included 1 early death, but this was not related to the surgical procedure. Two patients developed deep infections of the prosthesis. One underwent removal of the implant; the other is on long term oral antibiotic therapy. One patient had delayed union of the syndesmosis and six patients had non-union. On clinical assessment, patients' AOFAS scores improved from mean 40.4 pre-op to 83.5 post-op (p< 0.001). Radiological assessment of the tibial component revealed 25 (93%) patients had lucency in at least one zone in the AP radiograph. We found a relatively high level of re-surgery and complications following Agility total ankle replacement. A 7% revision rate is much higher than would be tolerated in knee or hip arthroplasty, but compares favourably to other studies of TAR. Despite radiological features which suggest loosening, the high rate of re-surgery and complications; patients are generally satisfied with the procedure, reporting lower levels of pain and improved function. Overall we feel that the Agility ankle is an acceptable alternative to ankle arthrodesis, however patients need to be warned of the risk of re-surgery

This prospective randomised controlled trial aims to compare the clinical and radiological outcomes of ceramic on ceramic, cobalt chrome on ultra-high molecular weight polyethylene, and cobalt chrome on highly cross-linked polyethylene bearing surfaces at a minimum of five years. One hundred and two primary total hip replacements were performed in ninety one patients between February 2003 and March 2005. All patients were younger than 65 (mean 52.7, 19–64). They were randomised to receive one of the three bearing surfaces. All patients had 28mm articulations with a Reflection uncemented acetabular component and a Synergy stem (Smith & Nephew, Memphis, Tennessee). Patients were followed up periodically up to at least sixty months following surgery. Outcome measures included WOMAC and SF12 scores. Radiological assessment included implant position, evidence of osteolysis and measurement of linear wear. Ninety seven hip replacements in eighty seven patients were available for review at a minimum of five years. Two hips were revised (one for infection and one for periprosthetic fracture), leaving a total of ninety four hips available for final review. There were no differences in age, gender, body mass index, diagnosis, level of activity, and co-morbidities between the three groups. At a minimum of five years there were no statistical differences in the clinical outcomes using the WOMAC or SF12 scores. Three patients in the ceramic group reported squeaking. Radiological evaluation revealed mean annual wear rates in the ceramic group of 0.006mm/yr, standard polyethylene of 0.151mm/yr and highly cross linked polyethylene of 0.059mm/yr. ANOVA analysis revealed these differences in wear rates to be significant (p<0.0001). In the mid term there are no differences in clinical outcome between ceramic on ceramic, cobalt chrome on ultra-high molecular weight polyethylene, and cobalt chrome on highly cross-linked polyethylene bearing surfaces in total hip arthroplasty. Ultra high molecular weight polyethylene has a significantly greater annual linear wear rate than highly cross-linked polyethylene

Background. Patellar instability is a complex, multi-factorial disorder. Radiological assessment is regarded as an important part of the management of this population. The purpose of this study was to determine the intra- and inter-rater reliability of common radiological measurements used to evaluate patellar instability. Methods. One hundred and fifty x-rays from 51 individuals were reviewed by five reviewers: two orthopaedic trainees, a radiological trainee, a consultant radiologist and an orthopaedic physiotherapist. Radiological measurements assessed included patellar shape, sulcus angle, congruence angle, lateral patellofemoral angle (LPA), lateral patellar displacement (LPD), lateral displacement measurement (LDM), boss height, and patellar height ratios (Caton-Deschamps, Blackburne-Peel, Insall-Salvati). All assessors were provided with a summary document outlining the method of assessing each measurement. Bland-Altman analyses were adopted to assess intra- and inter-rater reliability. Results. The results indicated generally low measurement error on intra-rater reliability assessment, particularly for LPD (within-subject variance 0.7mm to 3.7mm), LDM (0.7mm to 3.5mm) and boss height (0.4mm to 1.6mm) for all assessors. There was greater measurement error for the calculation of sulcus angle (0.7° to 10.6°), congruence angle (0.8° to 18.4°) and LPA (0.8° to 16.5°). Whilst the inter-rater reliability between assessors indicated a low mean difference for assessments of patellar height measurements (0.0° to 0.6°), there was greater variability for LPA (0.1° to 3.6°), LPD (0.2mm to 4.6mm) and LDM (0.1mm to 4.0mm), with wide 95% limits of agreement for all measurements indicated poor precision. Conclusions. Many of the standard measurements used to assess the patellofemoral joint on plain radiographs have poor precision. Intra-rater reliability may be related to experience but it seems likely that to achieve good inter-rater reliability, specific training may be required to calibrate observers. More formal training in the technique of radiological measurement for those who were inexperienced might have improved the inter-rater reliability

Purpose. This prospective randomised controlled trial aims to compare the clinical and radiological outcomes of ceramic on ceramic, cobalt chrome on ultra-high molecular weight polyethylene, and cobalt chrome on highly cross-linked polyethylene bearing surfaces at a minimum of five years. Method. One hundred and two primary total hip replacements were performed in ninety one patients between February 2003 and March 2005. All patients were younger than 65 (mean 52.7, 19–64). They were randomised to receive one of the three bearing surfaces. All patients had 28mm articulations with a Reflection uncemented acetabular component and a Synergy stem (Smith & Nephew, Memphis, Tennessee). Patients were followed up periodically up to at least sixty months following surgery. Outcome measures included WOMAC and SF12 scores. Radiological assessment included implant position, evidence of osteolysis and measurement of linear wear. Results. Ninety seven hip replacements in eighty seven patients were available for review at a minimum of five years. Two hips were revised (one for infection and one for periprosthetic fracture), leaving a total of ninety four hips available for final review. There were no differences in age, gender, body mass index, diagnosis, level of activity, and comorbidities between the three groups. At a minimum of five years there were no statistical differences in the clinical outcomes using the WOMAC or SF12 scores. Three patients in the ceramic group reported squeaking. Radiological evaluation revealed mean annual wear rates in the ceramic group of 0.006mm/yr, standard polyethylene of 0.151mm/yr and highly cross linked polyethylene of 0.059mm/yr. ANOVA analysis revealed these differences in wear rates to be significant (p<0.0001). Conclusion. In the mid term there are no differences in clinical outcome between ceramic on ceramic, cobalt chrome on ultra-high molecular weight polyethylene, and cobalt chrome on highly cross-linked polyethylene bearing surfaces in total hip arthroplasty. Radiologically there was little evidence of linear wear in the ceramic group. Cobalt chrome on ultra high weight polyethylene has a significantly greater annual linear wear rate than that of cobalt chrome on highly cross-linked polyethylene

There are a growing number of younger patients with developmental dysplasia of hip, proximal femoral deformity and osteonecrosis seeking surgical intervention to restore quality of life, and the advent of ISTCs has resulted in a greater proportion of such cases being referred to existing NHS departments. Bone-saving hip athroplasty is often advocated for younger active patients, as they are potential candidates for subsequent revision arthroplasty. If resurfacing is contraindicated, short bone-conserving stems may be an option. The rationale for short stems in cementless total hip arthroplasty is proximal load transfer and absence of distal fixation, resulting in preserved femoral bone stock and avoidance of thigh pain. We have carried out 17 short stem hip replacements (Mini-hip, Corin Medical, Cirencester, UK) using ceramic bearings in 16 patients since June 2010. There were 14 females and 2 males, with a mean age of 50.1 years (range 35–63 years) at the time of the surgery. The etiology was osteoarthritis in 11, developmental dysplasia in 4, and osteonecrosis of the femoral head in one patient. All operations were performed through a conservative anterolateral (Bauer) approach. These patients are being followed and evaluated clinically with the Harris and Oxford hip scores, with follow-up at 6 weeks, 3 months, and annually thereafter. Initital results have been encouraging in terms of pain relief, restoration of leg length (one of the objectives in cases of shortening) and rage of movement. Radiological assessment has shown restoration of hip biomechanics. Specific techniques are required to address varus, valgus and femoral deformity with leg length inequality. There are two main groups of short stems, those that are neck-preserving and those that do not preserve the femoral neck. The latter group requires traditional techniques for revision. Another feature that differentiates them is the availability of modularity. The device we employed is neck-preserving and available with different neck lengths and offsets, which help in restoration of hip biomechanics. The advantage of such short stems may be preservation of proximal femoral bone stock, decreased stress shielding and the ease of potential revision. Such devices may be a consideration for patients with malformations of the proximal femur. Long-term follow-up will be of value in determining if perceived benefits are realised in practice

Aim. This prospective randomised controlled trial aims to compare the clinical and radiological outcomes of ceramic on ceramic, cobalt chrome on ultra-high molecular weight polyethylene, and cobalt chrome on highly cross-linked polyethylene bearing surfaces at a minimum of five years. Methods. One hundred and two primary total hip replacements were performed in ninety one patients between February 2003 and March 2005. All patients were younger than 65 (mean 52.7, 19-64). They were randomised to receive one of the three bearing surfaces. All patients had 28mm articulations with a Reflection uncemented acetabular component and a Synergy stem (Smith & Nephew, Memphis, Tennessee). Patients were followed up periodically up to at least sixty months following surgery. Outcome measures included WOMAC and SF12 scores. Radiological assessment included implant position, evidence of osteolysis and measurement of linear wear. Results. Ninety seven hip replacements in eighty seven patients were available for review at a minimum of five years. Two hips were revised (one for infection and one for periprosthetic fracture), leaving a total of ninety four hips available for final review. There were no differences in age, gender, body mass index, diagnosis, level of activity, and comorbidities between the three groups. At a minimum of five years there were no statistical differences in the clinical outcomes using the WOMAC or SF12 scores. Three patients in the ceramic group reported squeaking. Radiological evaluation revealed mean annual wear rates in the ceramic group of 0.006mm/yr, standard polyethylene of 0.151mm/yr and highly cross linked polyethylene of 0.059mm/yr. ANOVA analysis revealed these differences in wear rates to be significant (p<0.0001). Conclusions. In the mid term there are no differences in clinical outcome between ceramic on ceramic, cobalt chrome on ultra-high molecular weight polyethylene, and cobalt chrome on highly cross-linked polyethylene bearing surfaces in total hip arthroplasty. Radiologically there was little evidence of linear wear in the ceramic group. Cobalt chrome on ultra high weight polyethylene has a significantly greater annual linear wear rate than that of cobalt chrome on highly cross-linked polyethylene

Background. Unicompartmental knee replacement (UKR) is an established treatment for single compartment end-stage knee arthrosis with good recorded survivorship. Although often used in more active younger patients, patient selection remains controversial. To identify risk factors for early failure we compared patients with UKR failure requiring revision to total knee replacement (TKR) with a control group. Methods & Results. Between September 2002 and 2008, 812 Oxford Mobile Bearing Medial UKRs were implanted. 21 implants (20 patients) required revision to TKR within 5 years. The leading cause for revision was lateral compartment disease progression (11 patients). In the revision group, 17 patients were female (81%), average age at index surgery was 64.1 (range 48-81) and average BMI 31.8 (range 24.4-41.5). In the control group of all patients who underwent UKR during this period, 348 patients were female (44%), average age was 65.0 (range 36-89) and average BMI 31.2 (range 21.0-61.0). Radiological assessment of the tibiofemoral valgus (TFV) angle for revision patients was compared with an age and sex matched control group. In the revision group, average TFV angle was +1.5 pre-operatively and +6.1 post-operatively with an average change of +4.6. In the control group average TFV angle was -0.4 pre-operatively and +4.3 post-operatively with an average change of +4.7. Conclusion. Our UKR patients with early failure requiring revision were far more likely to be female (p=0.0012) whilst age and BMI were similar between groups. Although the change in TFV angle was similar, control group patients started in varus becoming valgus post-operatively, whereas revision group patients started in valgus and became more valgus post-operatively. This might explain lateral compartment disease progression as our leading cause of early failure. We believe females with medial compartment disease but valgus alignment are at greater risk of early failure and it is particularly important not to overstuff the medial compartment