Purpose. To evaluate outcome after cementless bipolar hemiarthroplasties using a standard(tapered, rectangular) stem for the treatment of above type A2 fractures in elderly patients. Material and methods. We reviewed the records of 37 patients who underwent bipolar hemiarthroplasty between February 2006 and Feburuary 2010 in our hospital who were followed for more than two years after surgery. The mean patient age was 73.5 years old (range 64∼88 years old). 16 patients were men, and 21 patients were women. We evaluated the results by analyzing operation time, amount of bleeding, recovery of walking ability, complications and radiologic findings. Result. The mean operation time was 75.3 minutes. The average total amount of bleeding was of 755.5 cc. At the last follow-up, 23 patients (62%) had recovered walking ability. Complications included a deep infection in one case, 1 cases of acetabular erosion, 2 cases of greater trochanter non-union. There were no revisions due to prosthesis loosening or another reason. Conclusion. Cementless bipolar hemiarthroplasty using a tapered, rectangular stem can be an alternative treatment for type A2 intertrochanteric fractures in elderly patients so as to achieve earlier mobilisation

Purpose. We evaluated the clinical and radiographic outcomes of cementless bipolar hemiarthroplasty using rectangular cross-section stem for femoral neck fracture in elderly patients more than 80 years of age with osteoporosis. Material and Methods. 76(cemented 46, cementless 30) bipolar hemiarthroplasties for femur neck fracture were performed in elderly patients more than 80 years old. The mean follow-up period was 4.3 years (2 to 7 years). The Harris hip score at last follow-up and pre-postoperative daily living activity scale according to Kitamura methods were analyzed clinically. The radiological results were assessed using stability of femoral stem and other complications were evaluated. Results: At last follow-up, there were no significant differences of Harris hip score and daily living activity between two groups. Stem loosening and instability were not observed in cementless arthroplasty. There were 18 cases of osseous fixation in radiologic study. There were 1 case of dislocation and 1 case of superficial infection in cemented arthroplasty and 1 case of deep infection in cementless arthroplasty. Conclusion. Cementless bipolar hemiarthroplasty using rectangular cross-section stem for elderly patients with a femoral neck fracture showed satisfactory short-term clinical and radiological results compared to using cement stem

Background. Aseptic loosening is rare with most cementless tapered stems in primary total hip arthroplasty (THA), however different factors can modify results. We ask if the shape and technique of three current different femoral components affects the clinical and radiological outcome after a minimum follow-up of ten years. Methods. 889 cementless tapered stems implanted from 1999 to 2007 were prospectively followed. Group 1 (273 hips) shared a conical shape and a porous-coated surface, group 2 (286 hips) a conical splined shape and group 3 (330 hips) a rectangular stem. Clinical outcome and anteroposterior and sagittal radiographic analysis were compared. Femoral type, stem position, femoral canal filling at three levels and the possible appearance of loosening and bone remodelling changes were assessed. Results. No thigh pain was reported in unrevised patients. Mean Harris Hip score was lower for patients in group 3 for pain and function at 6 months, two years and at latest follow-up. The survival rate of not having revision of the stem for any cause was 98.5% (95% CI 98.8–100) for group 1 at 12 years, 99.3 % ((95% Confidence Intervals (CI) 97.9–100) for group 2 at 16 years and 97.7% (95% (CI) 94–100) for group 3 at 14 years, and (log rank= 0.109). Thirteen stems from the latter were revised for aseptic loosening. No revision for aseptic loosening was found in the other designs. After controlling all confounding factors, the risk for aseptic loosening in group 3 was related to a lower femoral canal filling (p=0.039, Hazard Ratio (HR):0.918, 95% Confidence Interval (CI):0.846–0.996) and a stem position outside neutral limits in the sagittal alignment (p=0.048, HR:3.581, 95% CI:1.010–12.696). Conclusions. Conical tapered cementless stems are more reliable than rectangular straight designs in primary THA after ten years

In recent years, cementless stems have dominated the North American market. There are several categories of cementless stems, but in the past 20 years, the two most popular designs in the United States have been the extensively coated cylindrical cobalt-chrome (CoCr) stem and the proximally coated tapered titanium stem, which in recent years has become the most common. The 10-year survival for both stem types has been over 95% with a distinction made on factors other than stem survival, including thigh pain, stress shielding, complications of insertion, and ease of revision. Conventional wisdom holds that proximally coated titanium stems have less stress shielding, less thigh pain, and a higher quality clinical result. Recent studies, however, including randomised clinical trials have found that the incidence of thigh pain and clinical result is essentially equivalent between the stem types, however, there is a modest advantage in terms of stress shielding for a tapered titanium stem over an extensively coated CoCr stem. One study utilizing pain drawings did establish that if a CoCr cylindrical stem was utilised, superior clinical results in terms of pain score and pain drawings were obtained with a fully coated versus a proximally coated stem. In spite of the lack of a clinically proven advantage in randomised trials, tapered titanium stems have been favored because of the occasional occurrence of substantial stress shielding, the increased clinical observation of thigh pain severe enough to warrant surgical intervention, ease of use of shorter tapered stems that involve removal of less trochanteric bone and less risk of fracture both at the trochanter and the diaphysis due to the shorter, and greater ease of insertion through more limited approaches, especially anterior approaches. When tapered stems are utilised, there may be an advantage to a more rectangular stem cross-section in patients with type C bone. In spite of the numerous clinical advantages of tapered titanium stems, there still remains a role for more extensively coated cylindrical stems in patients that have had prior surgery of the proximal femur, particularly for a hip fracture, which makes proximal fixation, ingrowth, and immediate mechanical stability difficult to assure consistently. Cement fixation should also be considered in these cases. While the marketplace and the clinical evidence strongly support routine use of tapered titanium proximally coated relatively short stems with angled rather than straight proximal lateral geometry in the vast majority of cases, there still remains a role for more extensively coated cylindrical and for specific indications

Fixation of the femoral component in total hip arthroplasty is a surgical challenge in the best of circumstances. Achieving immediate fixation without breaking the femur is a challenge, even to highly skilled and experienced arthroplasty surgeons. Surgical procedures are available that offer cosmetic benefit or a slightly quicker recovery, but accepting this compromise for fixation should be avoided. The mechanical environment of the femoral component is challenging. The implant is exposed to offset loading in two planes, which results in substantial bending stress and rotational loads in the frontal plane as well as bending stress and torsional loads in the sagittal plane. The proximal femur is built to transmit load through the surface fibers, not the central cavity, so efforts to change it to a centrally loaded structure are fraught with difficulty. The entire structure should be used. The least reliable material is the cancellous bone in the intertrochanteric metaphysis and the most effective is the cancellous bone of the femoral neck and cortical bone of the upper diaphysis. For best fixation of the femoral component, the cortical bone of the upper metaphysis should be contacted, and the diaphyseal cortical bone actually should be grooved by the femoral stem during insertion. Approach to the hip is important in fixation of the femoral component. Approaches that require femoral neck resection and use of a short stem are especially treacherous. The posterior approach is attractive because it encourages preservation of the femoral neck, and it provides straight access to the medullary canal of the femur while protecting the abductor muscles. Static axial load in the extended position is most readily resisted by the femoral component. Distal cortical contact is very important to prevent toggle. Torsional loads generated from offset loading of the femoral head in flexion and with front-to-back acceleration generated loads during rapid gait are the most challenging in securing fixation of the implant. Ideal conditions include preservation of the femoral neck, engagement of a rectangular stem in a rectangular cavity, and mechanical lock into grooves in the diaphyseal cortical bone. If all these conditions are met, femoral component fixation can be achieved every time without damaging the abductor muscle group, and with minimal danger of femoral fracture. A posterior approach with femoral neck preservation and a rectangular shaped femoral component with diaphyseal engaging stem is safe surgery and good mechanics. The anterior approach with femoral neck sacrifice and round, short stems is unsafe surgery and bad mechanics

Background. The clinical results of total hip arthroplasty (THA) with a cementless prosthesis have been constantly improving due to progress in the area of stem design and surface finish. However, majority of stems are well-fixed with canal filling or diaphyseal fit, and cortical hypertrophy or metaphyseal bone atrophy has been often observed. Cementless Spotorno stem (CLS stem; Zimmer, Warsaw, USA) is a double-tapered rectangular straight stem. The purpose of this study is to investigate the mean 13 years' results of CLS stem and to evaluate the press-fit stability of CLS stem. Methods. Between 1999 and 2004, we treated 134 patients (142 hips) with CLS stem. Of those patients, 86 females (92 hips) and 13 males (14 hips), in total 99 patients (106 hips) were available at minimum of 11 years after surgery. At the time of follow-up, six females and five males were dead. The follow-up rate was 82% and the mean follow-up period was 13 years (SD; 20, range; 11–16). The mean age at the time of surgery was 65 years (SD; 10, range; 38–86). The mean body mass index was 24 (SD; 1.8, range; 19 to 28). Preoperative diagnoses were osteoarthritis in 92 patients, osteonecrosis in five patients, and rheumatoid arthritis in two patients. Majority of the patients were female because 84 patients of osteoarthritis suffered from hip dysplasia. For cementless acetabular reconstruction, APR cups (Zimmer, Warsaw, USA) were implanted in 10 hips, IOP cups (Zimmer, Warsaw, USA) in 22 hips, and Converge cups (Zimmer, Warsaw, USA) in 74 hips. As the liner of acetabular component, conventional UHMWPE (Sulene: Zimmer, Warsaw, USA) was used in APR cup and highly crosslinked UHMWPE (Durasul: Zimmer, Warsaw, USA) in IOP and Converge cups. The lipped liner was chosen in all cases, and lipped lesion was placed posteriorly. The radiographic stability of the femoral stem was determined by Engh's criteria. The ascertained period of spot welds was noted by Gruen zones on the femoral side. The presence of stress shielding, and subsidence was also evaluated. Results. A stable stem with bony on-growth was identified in all cases. The mean period of expression of spot welds was 11 months in zone 2, 10 months in zone 3, 9 months in zone 5, and 9 months in zone 6. Stress shielding of more than grade 2 was observed in only 8 hips, which was non-progressive at 1 year after surgery. Subsidence of more than 2mm was not observed in any of the hips. The cortical hypertrophy at the tip of stem was not observed. The postoperative dislocation occurred in six hips (6%) and periprosthetic femoral fracture occurred in two hips (2%). Revised surgery was performed in three hips for a recurrent dislocation and two periprosthetic femoral fracture. Conclusions. Excellent stability of CLS stem has been maintained without abnormal bone reaction at proximal femur. CLS stem is considered to achieve not only press-fit stability at trochanteric and subtrochanteric level, but bony fixation by osseointegration within 1 year after THA