This study reports the clinical and sonographic outcome of arthroscopic rotator cuff repair in patients aged ≥ 70 years and aimed to determine factors associated with re-tear. A total of 69 consecutive repairs were performed in 68 patients with a mean age of 77 years (70 to 86). Constant-Murley scores were collected pre-operatively and at one year post-operatively. The integrity of the repair was assessed using ultrasound. Re-tear was detected in 20 of 62 patients (32%) assessed with ultrasound. Age at operation was significantly associated with re-tear free survival (p = 0.016). The mean pre-operative Constant score was 23 (sd 14), which increased to 58 (sd 20) at one year post-operatively (paired t-test, p < 0.001). Male gender was significantly associated with a higher score at one year (p = 0.019).

We conclude that arthroscopic rotator cuff repair in patients aged ≥ 70 years is a successful procedure. The gender and age of the patient are important factors to consider when planning management.

Cite this article: Bone Joint J 2013;95-B:199–205.

Rotator cuff repair has excellent clinical outcomes but continues to be a challenge when it comes to large and massive tears as well as revision procedures. Reported symptomatic retear rates are still too high to be acceptable. The purpose of the present study was to evaluate the effectiveness of a combination of augmentation techniques consisting of microfractures of the greater tuberosity, extracellular matrix (ECM) patch graft and subsequent platelet concentrate (PC) subacromial injections in revision rotator cuff repair. The study was designed as a retrospective comparative study on prospectively collected data from a consecutive cohort of patients. All patients who underwent arthroscopic revision rotator cuff repair for symptomatic failure of previous posterosuperior rotator cuff repair were considered eligible for the study. Symptomatic failure had been diagnosed according to clinical examination and confirmed by magnetic resonance imaging (MRI). Structural integrity had been assessed on MRI and classified according to Sugaya classification. Only patients affected by stage IV-V were considered eligible. Tear reparability was confirmed during arthroscopy. Only patients with a minimum 2 years follow-up were included. Patients were divided in two groups. In group 1 (control group) a standard arthroscopic revision and microfractures of the greater tuberosity were performed; in group 2 (experimental group), microfractures of the greater tuberosity and a ECM patch graft were used to enhance tendon repair, followed by postoperative PC injections. Minimum follow-up was 12 months. Primary outcome was the Constant-Murley score (CMS) normalized for age and gender. Subjective outcome was assessed with the Disabilities of the Arm, Shoulder and Hand (DASH) score in its short version (Quick-DASH). Tendon integrity was assessed with MRI at 6 months after surgery. Comparison between groups for all discrete variables at baseline and at follow-up was carried out with the Student's t-test for normally distributed data, otherwise Mann-Whitney U-test was used. Within-group differences (baseline vs follow-up) for discrete variables were analyzed by paired t-test, or by Wilcoxon signed-rank test in case of data with non-normal distribution. Differences for categorical variables were assessed by chi-squared test. Significance was considered for p values < 0.05. Forty patients were included in the study (20 patients for each group). The mean follow-up was 13 ± 1.6 months. No patients were lost at the follow up. Comparison between groups did not show significant differences for baseline characteristics. At follow-up, mean CMS was 80.7 ± 16.6 points in group 1 and 91.5 ± 11.5 points in group 2 (p= 0.022). Mean DASH score was 28.6 ± 21.6 points in group 1 and 20.1 ± 17.4 points in group 2 (p= 0.178). Post-operative MRI showed 6 healed shoulders in Group 1 and 16 healed shoulders in Group 2 (p<0.004). No postoperative complications were reported in both groups. The combination of microfractures of the greater tuberosity, ECM patch graft, and subsequent PC subacromial injections is an effective strategy in improving tendon healing rate

A prospective study was carried out to determine if recognised histological features seen at surgery could help predict those rotator cuff tendon repairs which re-ruptured. 40 rotator cuff tendon edge specimens from 40 patients’ shoulders were analysed histologically following routine mini-open rotator cuff repair. 32/40 underwent Ultrasonography, at a mean time of 35 months post-operatively, to determine repair integrity. The histological features seen at surgery were then compared to the repair integrity of the tendon from which it had been taken. Rotator cuff repairs that remained intact demonstrated a greater reparative response, in terms of increased fibrobast cellularity, cell proliferation and a thickened synovial membrane, than those repairs which reruptured. Larger tears which remained intact showed a higher degree of vasacularity and a significant inflammatory component than those that re-ruptured. Good tissue quality at the time of surgery allows the repair the best chance of remaining intact despite the size of the lesion. Routine histological analysis of the tissue biopsy, preformed in the post-operatively, can now aid the clinician in terms of early management and repair prognosis

Economic evaluation of surgical procedures is necessary in view of emerging, often more expensive newer techniques and the budget constraints in an increasingly cost conscious NHS. The purpose of the study was to compare the cost effectiveness of open cuff repair with arthroscopic repair for moderate size tears. This was a prospective study involving 20 patients. Ten had an arthroscopic repair and 10 had an open procedure. Effectiveness was measured by pre and post-operative Oxford scores. The patients also had Constant scores done. Costs were estimated from the departmental and hospital financial data. Rotator cuff repair was an effective operation in both the groups. At the last follow up there was no statistically significant difference in the patients Oxford and Constant scores between the two methods of repair. There was no significant difference in the time in theatre, inpatient time, post-operative analgesia, number of pre and post-operative outpatient visits, physiotherapy costs and time off work between the two groups. The arthroscopic cuff repair was significantly more expensive than open repair. The incremental cost of each arthroscopic repair was £610 higher than open procedure. This was mainly in the area of direct health-care costs (instrumentation in particular). Health care policy makers are increasingly demanding evidence of cost effectiveness of a procedure. Such data is infrequently available in orthopaedics. To our knowledge there no published cost-utility analysis for the above said two types of interventions for cuff repair. Both methods of repair are effective but in our study open cuff repair is more cost effective and is likely to have better (lower) cost-utility ratio

Eighteen Arthroscopic and nine mini-open Rotator Cuff repairs were evaluated at an average of 31.5 months post-operatively. The tears were classified as small, moderate and massive with all the massive tears in the mini-open group. The arthroscopic group showed 94% patient satisfaction with the Western Ontario Rotator Cuff Index scale (WORC) of 89.6% and the University of California at Los Angeles (UCLA) score of 32.4/35. The mini-open technique showed 100% patient satisfaction, 83.7% with the WORC and 27.7/35 with the UCLA. This study showed both procedures were effective. It is one of the first to report on the use of the WORC index for evaluation. The purpose of this study was to evaluate the mid term results of arthroscopic and mini-open (arthroscopic assisted) rotator cuff repairs using the Western Ontario Rotator Cuff Index (WORC) and the University of California at Los Angeles (UCLA) validated assessment systems. Patients with classic rotator cuff tears were identified retrospectively and then seen for a one-time evaluation and scoring, using the WORC and UCLA index. The tears were classified as small- < 2 cm, moderate 2– 5 cm, and massive > 5cm. 27/33 (82%) responded, eighteen arthroscopic, nine mini-open with all the massive tears falling into the mini-open category. The average time frame from operation was 31.5 months, average age, 57.7 years. Overall results for the arthroscopic technique were, 94% (17/18) patient satisfaction, WORC 89.6%, UCLA 32.4/35. Overall result for the mini-open technique was 100% patient satisfaction, WORC 83.7%, UCLA 27.7/35. The size of the tear was found to be statistically significant only with respect to the degree of external rotation achieved at the final evaluation. WCB patients (three) showed a discrepancy between subjective and objective outcomes. Arthroscopic and mini-open Rotator Cuff repairs are associated with a very high level of patient satisfaction, and high scores when evaluated by the WORC and UCLA indexes. This study shows that arthroscopic, and mini-open repairs (for the massive tears), are very effective procedures. It is one of the first to utilize the WORC index for evaluation along with the UCLA which has been more commonly used

Arthroscopic Rotator cuff repair is gaining popularity in recent years; however, the results of arthroscopic repairs are yet to be reported. Between November 2001 to May 2003, 115 consecutive patients were operated (73 males and 42 females) with arthroscopic repair. 13 patients were lost to follow up, leaving 102 patients available for follow up. The mean follow up time was 23.8 months (range 12–61). There were 107 patients (95.5%) with full thickness tears and 5 (4.5%) had partial thickness tears. Of the full thickness tears, 8 (7.6%) were massive in size, 36 (34%) large, 44 (41.5%) medium and 18(17%) small. Mean age was 57.3 years (range 23–78). 47% had a history of trauma. Mainly Supraspinatus (SSP) tear was recorded in 83.5% and isolated subscapularis tear in 7%. A combination of SSP tear with infraspinatus and teres minor minor (posterior tear) was found in 9.6%. 86% had Acromioplasty (ASD) with or without an AC joint excision arthroplasty. Two patients had Bankart repairs in addition at the time of cuff repair. Patients were evaluated using the Constant score, satisfaction levels and ultrasound scan to evaluate cuff integrity. Failures were defined as dissatisfied patients and those who had had a re-operation. Re-tear rate was recorded. The mean pre op Constant score was 40.9 points (95% CI 37.3 to 44.5), which had improved to 84.8 (CI 82.2 to 86.9) at last follow-up. 78% returned to same work and 82% returned to pre injury leisure activity. There were 20 ultrasound demonstrated re-tears (19.6%). However, the majority of patients with radiological re-tears had good function, pain relief and were satisfied. Eight of the 102 patients were not satisfied. Five of these patients had revision operation. Arthroscopic cuff repair shows high satisfaction rate (92%) and good functional results while offering all the advantages of arthroscopic surgery

Rotator cuff repair (RCR) can be performed open or arthroscopically, with a recent dramatic increase in the latter. Despite controversy about the preferred technique, there has been an increase in the number of repairs performed arthroscopically. The purpose of this study was, therefore, to compare revision rates following open and arthroscopic RCR repair. Adult patients undergoing first-time, primary rotator cuff repair in Ontario, Canada (April 2003-March 2014) were identified using physician billing and hospital databases. Patients were followed for a minimum of two and up to 13 years for the primary outcome, revision rotator cuff repair, and secondary outcome, surgical site infection. The intervention considered was open versus arthroscopic technique. Patient factors (age, gender, residence, socioeconomic status, medical comorbidities) and provider factors (surgical volume, hospital setting, worked night before, year of surgery) were recorded. Standardized mean differences were used for covariate comparison. A Cox Proportional Hazards model was used to compare RCR survivorship between the two groups after adjustment for patient and provider factors, generating hazard ratios with 95% confidence intervals (HR, 95% CIs). Censoring occurred on the first of the primary outcome, death, shoulder arthroplasty or arthrodesis, or the end of the follow-up period (March 2016). A total of 37,255 patients were included. The overall revision RCR rate was 2.9% (1,096 patients) with a median time to revision of 23 months (IQR 12–52). Revision repair was more common in the arthroscopic group in comparison to the open group (3.2% vs 2.6%, NNT 166.7, p=0.004), with an adjusted HR of 0.72 (0.63–0.83 95% CI, p < 0 .0001). The surgical site infection rate was significantly higher in the open group compared with the arthroscopic group (0.5% vs 0.2%, NNT 333.3, p < 0 .001). Patient and provider covariates had no statistically significant effect on revision rates, aside from increasing age (per 10 year increase, HR 0.85, 0.81–0.90 95% CI, p < 0 .0001). Revision rotator cuff repair is approximately 30% more common in patients undergoing arthroscopic repair, in comparison to open repair, after adjustment. Surgical site infection is uncommon regardless of surgical technique, however, it is slightly more common following open repair. In the setting of an economic healthcare crisis, trends of increasing arthroscopic RCR may demand scrutiny, as the technique is associated with higher revision rates and higher costs

The purpose of this study is to report the 1 to 5 year results of arthroscopic Rotator Cuff repairs. Between November 2001 to May 2003, 115 consecutive patients were operated (73 males and 42 females) with arthroscopic repair. 13 patients were lost to follow up, leaving 102 patients available for follow up. Patients were evaluated using the Constant score, satisfaction levels and ultrasound scan to evaluate cuff integrity. Failures were defined as dissatisfied patients and those who had had a re-operation. Re-tear rate was recorded. The mean follow up time was 23.8 months (range 12–61). Mean age was 57.3 years (range 23–78). 47% had a history of trauma. There were 107 patients (95.5%) with full thickness tears and 5 (4.5%) had partial thickness tears. Of the full thickness tears, 8 (7.6%) were massive in size, 36 (34%) large, 44 (41.5%) medium and 18(17%) small. Isolated Supraspinatus (SSP) tear was recorded in 83.5% and subscapularis tear in 7 %. A combination of SSP tear with infraspinatus and teres minor was found in 9.6%. 86% had Acromioplasty (ASD) with or without an AC joint excision arthroplasty. Two patients had Bankart repairs in addition at the time of cuff repair. The mean pre op Constant score was 40.9 points (95% CI 37.3 to 44.5), which had improved to 84.8 (CI 82.2 to 86.9) at last follow-up. 78% returned to same work and 82% returned to pre injury leisure activity. There were 20 re-tears (19.6%). eight of the 102 patients were not satisfied. Five of these patients had revision operation. Arthroscopic cuff repair shows high satisfaction rate (92%) and good functional results with 20% re-tear rate, while offering all the advantages of arthroscopic surgery

Obesity is associated with poor outcomes and increased risk of failure after rotator cuff (RC) repair surgery. The effect of diet-induced obesity (DIO) on enthesis healing has not been well characterised and whether its effects can be reversed with dietary intervention is unknown. We hypothesised that DIO would result in inferior enthesis healing in a rat model of RC repair and that dietary intervention in the peri-operative period would improve enthesis healing.

A total of 78 male Sprague-Dawley rats were divided into three weight-matched groups from weaning and fed either: control diet (CD), high-fat diet (HFD), or HFD until surgery, then CD thereafter (HF-CD). After 12 weeks the left supraspinatus tendon was detached, followed by immediate surgical repair. At 2 and 12 weeks post-surgery, animals were cullers and RCs harvested for biomechanical and histological evaluation. Body composition and metabolic markers were assessed via DEXA and plasma analyses, respectively.

DIO was established in the HFD and HF-CD groups prior to surgery, and subsequently reversed in the HF-CD group after surgery. At 12 weeks post-surgery, plasma leptin concentrations were higher in the HFD group compared to the CD group (5.28 vs. 2.91ng/ml, P=0.003). Histologically, the appearance of the repaired entheses was poorer in both the HFD and HF-CD compared to the CD group at 12 weeks (overall histological score 6.20 (P=0.008), 4.98 (P=0.001) and 8.68 out of 15, respectively). The repaired entheses in the HF-CD group had significantly lower (26.4 N, P=0.028) load-at-failure 12 weeks post-surgery compared to the CD group (34.4 N); while the HFD group was low, but not significantly different (28.1 N, P=0.096). Body mass at the time of surgery, plasma leptin and body fat percentage were negatively correlated with histological scores and plasma leptin with load-at-failure 12 weeks post-surgery.

DIO impaired enthesis healing in this rat RC repair model, with inferior biomechanical and histological outcomes. Restoring normal weight with dietary change after surgery did not improve healing outcomes. Exploring interventions that improve the metabolic state of obese patients and counselling patients appropriately about their modest expectations after repair should be considered.

This study aims to investigate the mechanical properties of a rotator cuff tear repaired with a polypropylene interposition graft in an ovine infraspinatus ex-vivo model.

Twenty fresh shoulders from skeletally mature sheep were used in this study. A tear size of 20 mm from the tendon joint was created in the infraspinatus tendon to simulate a large tear in fifteen specimens. This was repaired with a polypropylene mesh used as an interposition graft between the ends of the tendon. Eight specimens were secured with mattress stitches while seven were secured to the remnant tendon on the greater tuberosity side by continuous stitching. Remaining five specimens with an intact tendon served as a control group. All specimens underwent cyclic loading with a universal testing machine to determine the ultimate failure load and gap distance.

Gap distance increased with progressive cyclic loading through 3000 cycles for all repaired specimens. Mean gap distance after 3000 cycles for both continuous and mattress groups are 1.7 mm and 4.2 mm respectively (P = .001). Significantly higher mean ultimate failure load was also observed with 549.2 N in the continuous group, 426.6 N in the mattress group and 370 N in the intact group.

The use of a polypropylene mesh as an interposition graft for large irreparable rotator cuff tears is biomechanically suitable and results in a robust repair that is comparable to an intact rotator cuff tendon. When paired with a continuous suturing technique, it demonstrates significantly resultant superior biomechanical properties that may potentially reduce re-tear rates after repairing large or massive rotator cuff tears.

We hypothesised that diet-induced obesity (DIO) would result in inferior enthesis healing in a rat model of rotator cuff (RC) repair and that dietary intervention in the peri-operative period would improve enthesis healing.

A total of 78 male Sprague-Dawley rats were divided into three weight-matched groups from weaning and fed either: control diet (CD), high-fat diet (HFD), or HFD until surgery, then CD thereafter (HF-CD). After 12 weeks, the left supraspinatus tendon was detached, followed by immediate surgical repair. At 2 and 12 weeks post-surgery, animals were culled, and RCs harvested for biomechanical and histological evaluation. Body composition and metabolic markers were assessed via DEXA and plasma analyses, respectively.

DIO was established in the HFD and HF-CD groups before surgery and subsequently reversed in the HF-CD group after surgery. Histologically, the appearance of the repaired entheses was poorer in both the HFD and HF-CD groups compared with the CD group at 12 weeks after surgery, with semiquantitative scores of 6.2 (P<0.01), 4.98 (P<0.01), and 8.7 of 15, respectively. The repaired entheses in the HF-CD group had a significantly lower load to failure (P=0.03) at 12 weeks after surgery compared with the CD group, while the load to failure in the HFD group was low but not significantly different (P=0.10). Plasma leptin were negatively correlated with histology scores and load to failure at 12 weeks after surgery.

DIO impaired enthesis healing in this rat RC repair model, with inferior biomechanical and histological outcomes. Restoring normal weight with dietary change after surgery did not improve healing outcomes. Circulating levels of leptin significantly correlated with poor healing outcomes. This pre-clinical rodent model demonstrates that obesity is a potentially modifiable factor that impairs RC healing and increases the risk of failure after RC surgery.

The purpose of this study was to assess the clinical outcomes of three different rotator cuff repair techniques and to correlate these results with the integrity of the cuff as determined by ultrasonographic evaluation. Three cohorts of patients had repair of a symptomatic rotator cuff tear using:. an open technique with Mitek RC Quickanchor double row, one mattress suture per anchor (n = 49);. arthroscopic knotted Mitek RC Fastin single row, two simple sutures per anchor (n = 53);. arthroscopic knotless with Opus Magnum single row, one inverted mattress suture per anchor (n = 57) by one surgeon. Standardised patient and examiner determined outcomes were obtained prospectively pre-operatively and at 6 weeks, 3 months and 6 months post-operatively. Ultrasound studies were performed with a validated protocol at 6 months post surgery. Arthroscopic knotless repair was, on average,14 minutes faster than both open cuff repair (p< 0.001) and arthroscopic knotted repair (p< 0.01).Clinical outcomes were similar with the exception that the arthroscopic groups had, on average, 20% better ASES scores than the open group at 6 months (p< 0.001). The only complication was re-tear, which correlated with tear size (r=0.5, p< 0.001) and operation time (r=0.3, p< 0.001) and occurred more frequently following open repair (39%) compared with arthroscopic knotted (25%) and arthroscopic knotless (16%) repair (p< 0.01). The retear rates of tears > 8cm2 were significantly greater (p< 0.01) when using an open (88%) or arthroscopic knotted (67%) technique compared to the arthroscopic knotless (25%) cohort. Rotator cuff repair, whether performed via an open or arthroscopic technique resulted in improvements in pain, motion, strength and function. An intact cuff on ultrasound corresponded to better results with regard to supraspinatus strength, patient outcomes and rotator cuff functional ability. Tears > 8cm2 fixed with an arthroscopic knotless technique had better structural outcomes at 6 months

Several studies showed the efficacy of arthroscopic repair for Type II SLAP lesions without other associated lesions, but the only data reported on the association of arthroscopic repair of Type II SLAP lesion and rotator cuff tears involve young and active patient. To our knowledge, no studies have focused on patients over 50. We evaluated the results of a randomized controlled trial of arthroscopic repair in patients over 50 with rotator cuff tears and Type II SLAP lesion in whom the repair was effected repairing the two lesions, or repairing the rotator cuff tears and performing a tenotomy of the long head of the biceps. We recruited 63 patients. In 31 patients, we repaired the rotator cuff and the Type II SLAP lesion (Group 1). In the other 32 patients, we repaired the rotator cuff and tenotomized the long head of the biceps (Group 2). 7 patients (2 in the group 1 and 5 in the group 2) were lost to final follow up. A modified UCLA shoulder rating scale was used to evaluate pre-operative and post-operative shoulder pain, function, active forward flexion, strength and patient satisfaction. Of 63 patients randomized to one of the two treatments, 5.2 year results were available for 56. 7 patients (2 in the group 1 and 5 in the group 2) did not return at the final follow up. Statistically significant differences were seen with respect to the UCLA score and ROM values at final follow-up In Group 1 (SLAP repair and rotator cuff repair), the UCLA showed a statistically significant improvement from a pre-operative average rating of 10.4 (range 6 to 14) to an average of 27.9 (24–35) postoperatively (P< 0.001). In Group 2 (biceps tenotomy and rotator cuff repair), the UCLA showed a statistically significant improvement from a pre-operative average rating of 10.1 (range 5 to 14) to an average of 32.1 (range 30 to 35) post-operatively (P< 0.001) There was statistically significant difference in total post-operative UCLA scores and ROM when comparing the two groups post-operatively (P< 0.05). Arthroscopic management has been recommended for some SLAP lesions, but no studies have focused on patients over 50 with rotator cuff tear and Type II SLAP lesion. We compared the clinical outcome of patients over 50 affected with rotator cuff tears and Type II SLAP lesion in whom both the defects were repaired, or the rotator cuff tear was repaired and the long head of the biceps tendon was tenotomized. In our hands, the association of rotator cuff repair and biceps tenotomy provides better clinical outcome compared with repair of Type II SLAP lesion and of the rotator cuff. The repair of the two defects, in fact, can lead to worst clinical results compared with association Rotator cuff repair alone is sufficient to determine a good post-operative outcome, allowing to avoid post-operative stiffness of the shoulder

It is undetermined which factors predict return to work following arthroscopic rotator cuff repair. We aimed to identify which factors predicted return to work at any level, and return to pre-injury levels of work 6 months post-arthroscopic rotator cuff repair.

Multiple logistic regression analysis of prospectively collected demographic, pre-injury, preoperative, and intraoperative data from 1502 consecutive primary arthroscopic rotator cuff repairs, performed by a single surgeon, was performed to identify independent predictors of return to work, and return to pre-injury levels of work respectively, 6 months post-surgery.

Six months post-rotator cuff repair, 76% of patients returned to work (RTW), and 40% returned to pre-injury levels of work (Full-RTW). RTW at 6 months was likely if patients were still working after their injuries, but prior to surgery (Wald statistic [W]=55, p<0.0001), were stronger in internal rotation preoperatively (W=8, p=0.004), had full-thickness tears (W=9, p=0.002), and were female (W=5, p=0.030). Patients who achieved Full-RTW were likely to have worked less strenuously pre-injury (W=173, p<0.0001), worked more strenuously post-injury but pre-surgery (W=22, p<0.0001), had greater behind-the-back lift-off strength preoperatively (W=8, p=0.004), and had less passive external rotation range of motion preoperatively (W=5, p=0.034). Patients who were still working post-injury, but pre-surgery were 1.6-times more likely to RTW than patients who were not (p<0.0001). Patients who nominated their pre-injury level of work as “light” were 11-times more likely to achieve Full-RTW than those who nominated “strenuous” (p<0.0001).

Six months post-rotator cuff repair, a higher patient-rated post-injury, but pre-surgery level of work was the strongest predictor of RTW. A lower patient-rated pre-injury level of work was the strongest predictor of Full-RTW. Greater preoperative subscapularis strength independently predicted both RTW, and Full-RTW.

Surgical reattachment of torn rotator cuff tendons can lead to satisfactory clinical outcome but failures remain common. Ortho-R product is a freeze-dried formulation of chitosan (CS) that is solubilized in platelet-rich plasma (PRP) to form injectable implants. The purpose of the current pilot study was to determine Ortho-R implant acute residency, test safety of different implant doses, and assess efficacy over standard of care in a sheep model.

The infraspinatus tendon (ISP) was detached and immediately repaired in 22 skeletally mature ewes. Repair was done with four suture anchors in a suture bridge configuration (n = 6 controls). Freeze-dried formulations containing 1% w/v chitosan (number average molar mass 35 kDa and degree of deacetylation 83%) with 1% w/v trehalose (as lyoprotectant) and 42.2 mM calcium chloride (as clot activator) were solubilized with autologous leukocyte-rich PRP and injected at the tendon-bone interface and on top of the repaired site (n = 6 with a 1 mL dose and n = 6 with a 2 mL dose). Acute implant residency was assessed histologically at 1 day (n = 2 with a 1 mL dose and n = 2 with a 2 mL dose). Outcome measures included MRI assessment at baseline, 6 weeks and 12 weeks, histopathology at 12 weeks and clinical pathology. MRI images and histological slides were scored by 2 blinded readers (veterinarian and human radiologist, and veterinarian pathologist) and averaged. The Generalized Linear Model task (SAS Enterprise Guide 7.1 and SAS 9.4) was used to compare the different groups with post-hoc analysis to test for pairwise differences.

Ortho-R implants were detected near the enthesis, near the top of the anchors holes and at the surface of ISP tendon and muscle at 1 day. Numerous polymorphonuclear cells were recruited to the implant in the case of ISP tendon and muscle. On MRI, all repair sites were hyperintense compared to normal tendon at 6 weeks and only 1 out 18 repair sites was isointense at 12 weeks. The tendon repair site gap seen on MRI, which is the length of the hyperintense region between the greater tuberosity and tendon with normal signal intensity, was decreased by treatment with the 2 mL dose when compared to control at 12 weeks (p = 0.01). Histologically, none of the repair sites were structurally normal. A trend of improved structural organization of the tendon (p = 0.06) and improved structural appearance of the enthesis (p = 0.1) with 2 mL dose treatment compared to control was seen at 12 weeks. There was no treatment-specific effect on all standard safety outcome measures, which suggests high safety.

Ortho-R implants (2 mL dose) modulated the rotator cuff healing processes in this large animal model. The promising MRI and histological findings may translate into improved mechanical performance, which will be assessed in a future study with a larger number of animals. This study provides preliminary evidence on the safety and efficacy of Ortho-R implants in a large animal model that could potentially be translated to a clinical setting.

A rotator cuff tear is one of the most common traumatic and degenerative tendon injuries resulting in over 4.5 million physician visits in the US alone. Functional restoration of rotator cuff defects usually requires surgical repair, estimated at 300,000 cased in the US annually. However, postoperative retear of repaired tendons ranges from 20% in small to medium tears to over 90% in large and massive tears. Recently, augmentation with grafting materials to strengthen a reparable tear or to bridge an unrepairable defect has become a common and attractive strategy to reduce the retear rate, especially for large or massive tears. Current graft materials, however, have encountered great challenges in achieving these goals. To meet these challenges, we have developed an engineered tendon with layered tendon-fibrocartilage-bone composite (TFBC) from patellar-tibia unit revitalized by seeding bone marrow derived stem cells (BMDSCs) within the slices, and then reassembled to an engineered tendon. Both in vitro and in vivo results have shown that engineered TFBC enhance the biomechanical strength and biological healing using canine model.

The aim of this prospective study was to report the mid-term results of arthroscopic repair of full thickness rotator cuff tears.

One hundred and four shoulders in 102 consecutive patients were operated within a two-year period. There were 52 female and 50 male patients with a mean age of 64 years (range 41 to 79). Standard arthroscopic techniques of cuff repair were used, under regional inter-scalene block and balanced anaesthesia. The mean size of the cuff tear was 3 cm (range 1 to 6 cm). Patients were discharged within 24 hours and followed a specific rehabilitation protocol. An assessment was performed pre-operatively and at a mean follow-up of 7 months (range 3 to 24 months). Outcome measures included pain, activities of daily living, shoulder power and function and level of patient satisfaction.

Satisfactory pain relief was achieved in 98 patients (94%) with significant pain relief in 87 patients (83.6 %) and good in 12 patients (11.5 %). Ninety -six patients (92.3%) reported a satisfactory improvement in activities of daily living, with significant improvement in 89 (85.6%) and good in 7 (6.7%). Shoulder power was markedly improved in 95 patients (93%). High levels of patient satisfaction were noted in 93 patients. Seven patients were moderately satisfied and two patients were not satisfied.

The mean shoulder score improved from 29 pre-op to 82 post-op, and the shoulder function score from 32 pre-op to 84 post–op. Similar results were found when the subgroup of 65 patients over the age of sixty was compared to the group of 37 patients under the age of sixty. No difference in outcome was also noted in relation to the size of the tear, length of follow –up or sex of the patient.

We believe that this study has shown that the arthroscopic repair of the rotator cuff can consistently achieve a satisfactory outcome. It may therefore be considered as an alternative to the traditional open techniques.

This study was designed to evaluate the results of arthroscopic rotator cuff repair at a minimum follow-up of 2 years.

Only isolated full-thickness rotator cuff tears were included in the study. Of 63 cases that met the criteria, 51 were followed up. Results were measured with pre-operative and postoperative UCLA shoulder scores, Western Ontario Rotator Cuff (WORC)© scores, range of motion, strength and radiographs. The time to recovery and return to work, complications and patient satisfaction were also recorded. Data from various tear sizes were analysed to determine significant differences.

At the most recent follow-up, all patients had less pain and better function. Patients rated 48 shoulders (94%) satisfactory. Mean forward flexion was 170.4° and mean manual strength was 4.8/5. Significant strength differences in flexion and external rotation were found between various sizes of tear (p < 0.01). Mean UCLA scores for all tear sizes significantly improved from a preoperative 10.3 (±2.4) to a postoperative 32.1 (±4.3). The mean for small tears was 35, for medium tears 33.3 and for large tears 30. This difference was statistically significant (p < 0.05). Excellent postoperative UCLA scores were achieved in 26 shoulders (51%) and good results in 17 (33%), with seven shoulders (14%) fair and one (2%) poor. The mean overall WORC© score was 86.8% (±17.1) of normal. The mean time to recovery was 5.1 months.

Arthroscopic rotator cuff repair has good results and can be done on an outpatient basis with few complications. The results appear to depend on the tear size.

Introduction and Objectives: Among the pathological conditions associated with the subacromial space is rupture of the rotator cuff. Patients affected by this injury have a poorer response to medical or rehabilitative treatment than do patients with subacromial injuries without concurrent tearing of the rotator cuff. For this reason, surgical treatment is more often needed. Surgical treatment includes the excision of subacromial osteophytes and repair of the affected tendon. Even though acromioplasty can be performed arthroscopically, cuff repair generally requires small incisions due to the technical complexity of the procedure.

Materials and Methods: We have carried out a prospective study of 36 patients with torn rotator cuffs diagnosed by MRI who underwent acromioplasty performed with an incision of approximately 4cm when necessary and cuff repair either by direct suturing or reinforcement with rotator cuff plasty performed by the same surgeon. The rehabilitation protocol included early mobilisation at 24–48 hours, passive assisted mobilisation until the 4th week, and active mobilization after the 5th week. Follow-up time was a minimum of one year with pre- and postoperative Constant scale evaluations. We compared various results including previous duration of symptoms, the severity of cuff tearing, and the surgical technique that was used.

Results: Favorable results were achieved in terms of pain relief and restoration of mobility compared to the preoperative period, even though strength was not equal to that of the contralateral shoulder.

Discussion and Conclusions: Open surgery for rotator cuff tear repair continues to be the best surgical option if a small incision is made, good technique used, and early rehabilitation is performed.

The purpose of this study was to validate a dry model for the assessment of performance of arthroscopic rotator cuff repair (RCR) and labral repair (LR). We hypothesised that the combination of a checklist and a previously validated global rating scale (GRS) would be a valid and reliable means of assessing RCR and LR when performed by residents in a dry model.

An arthroscopic RCR and LR was performed on a dry model by residents, fellows, and sports medicine staff. Any prior RCR and LR exposure was noted. Participants were given a detailed surgical manuscript and technique video before the study began. Evaluation of residents was performed by staff surgeons with task-specific checklists created using a modified Delphi procedure, and the Arthroscopic Surgical Skill Evaluation Tool (ASSET). The hand movements and arthroscopic view of the procedures were recorded. Both videos were scored by a fellow blinded to the year of training of each participant.

A total of 35 residents, six fellows and five staff surgeons performed both arthroscopic RCR and LR on a dry model model (48 total). The internal reliability (Cronbach's Alpha) of the test using the total ASSET score was high (>0.8)). One-way analysis of variance for the total ASSET score and the total checklist score demonstrated a difference between participants based upon year of training (p<0.05). Post hoc analysis also demonstrated a significant difference in global ratings and checklist scores between junior residents (PGY1–3) and senior residents (PGY4&5), senior residents and fellows, and fellows and staff. A good correlation was seen between the total ASSET score and prior exposure to RCR and LR. The inter-rater reliability (ICC) between the examiner ratings and the blinded assessor ratings for the total ASSET score was good (0.8).

The results of this study provide evidence that the performance of a RCR and LR in a dry model is a valid and reliable method of assessing a resident's ability to perform these procedures, prior to performance in the operating room.