Aims

To validate the Sydney Hamstring Origin Rupture Evaluation (SHORE), a hamstring-specific clinical assessment tool to evaluate patient outcomes following surgical treatment.

Aims

The purpose of this study was to validate the diagnosis of periprosthetic joint infection (PJI) in the Danish Hip Arthroplasty Register (DHR).

Aims

To validate the English language Forgotten Joint Score-12 (FJS-12) as a tool to evaluate the outcome of hip and knee arthroplasty in a United Kingdom population.

Aim. This study aimed to externally validate promising preoperative PJI prediction models in a recent, multinational European cohort. Method. Three preoperative PJI prediction models (by Tan et al., Del Toro et al., and Bülow et al.) which previously demonstrated high levels of accuracy were selected for validation. A multicenter retrospective observational analysis was performed of patients undergoing total hip arthroplasty (THA) and total knee arthroplasty (TKA) between January 2020 and December 2021 and treated at centers in the Netherlands, Portugal, and Spain. Patient characteristics were compared between our cohort and those used to develop the prediction models. Model performance was assessed through discrimination and calibration. Results. A total of 2684 patients were included of whom 60 developed a PJI (2.2%). Our patient cohort differed from the models’ original cohorts in terms of demographic variables, procedural variables, and the prevalence of comorbidities. The c-statistics for the Tan, Del Toro, and Bülow models were 0.72, 0.69, and 0.72 respectively. Calibration was reasonable, but precise percentage estimates for PJI risk were most accurate for predicted risks up to 3-4%; the Tan model overestimated risks above 4%, while the Del Toro model underestimated risks above 3%. Conclusions. In this multinational cohort study, the Tan, Del Toro, and Bülow PJI prediction models were found to be externally valid for classifying high risk patients for developing a PJI. These models hold promise for clinical application to enhance preoperative patient counseling and targeted prevention strategies. Keywords. Periprosthetic Joint Infection (PJI), High Risk Groups, Prediction Models, Validation, Infection Prevention

Introduction. Acetabular bone defects are still challenging to quantify. Numerous classification schemes have been proposed to categorize the diverse kinds of defects. However, these classification schemes are mainly descriptive and hence it remains difficult to apply them in pre-clinical testing, implant development and pre-operative planning. By reconstructing the native situation of a defect pelvis using a Statistical Shape Model (SSM), a more quantitative analysis of the bone defects could be performed. The aim of this study is to develop such a SSM and to validate its accuracy using relevant clinical scenarios and parameters. Methods. An SSM was built on the basis of segmented 66 CT dataset of the pelvis showing no orthopedic pathology. By adjusting the SSM's so called modes of shape variation it is possible to synthetize new 3D pelvis shapes. By fitting the SSM to intact normal parts of an anatomical structure, missing or pathological regions can be extrapolated plausibly. The validity of the SSM was tested by a Leave-one-out study, whereby one pelvis at a time was removed from the 66 pelvises and was reconstructed using a SSM of the remaining 65 pelvises. The reconstruction accuracy was assessed by comparing each original pelvis with its reconstruction based on the root-mean-square (RMS) surface error and five clinical parameters (center of rotation, acetabulum diameter, inclination, anteversion, and volume). The influence of six different numbers of shape variation modes (reflecting the degrees of freedom of the SSM) and four different mask sizes (reflecting different clinical scenarios) was analyzed. Results. The Leave-one-out study showed that the reconstruction errors decreased when the number of shape variation modes included in the SSM increased from 0 to 20, but remained almost constant for higher numbers of shape variation modes. For the SSM with 20 shape variation modes, the RMS of the reconstruction error increased with increasing mask size, whereas the other parameters only increased from Mask_0 to Mask_1, but remained almost constant for Mask_1, Mask_2 and Mask_3. Median reconstruction errors for Mask_1, Mask_2, and Mask_3 were approximately 3 mm in Center of Rotation (CoR) position, 2 mm in Diameter, 3° in inclination and anteversion, as well as 5 ml in volume. Discussion. This is the first study analyzing and showing the feasibility of a quantitative analysis of acetabular bone defects using a SSM-based reconstruction method in the clinical scenario of a defect or implant in both acetabuli and incomplete CT-scans. Validation results showed acceptable reconstruction accuracy, also for clinical scenarios in which less healthy bone remains. Further studies could apply this method on a larger number of defect pelvises to obtain quantitative measures of acetabular bone defects

Objectives. Static radiostereometric analysis (RSA) using implanted markers is considered the most accurate system for the evaluation of prosthesis migration. By using CT bone models instead of markers, combined with a dynamic RSA system, a non-invasive measurement of joint movement is enabled. This method is more accurate than current 3D skin marker-based tracking systems. The purpose of this study was to evaluate the accuracy of the CT model method for measuring knee joint kinematics in static and dynamic RSA using the marker method as the benchmark. Methods. Bone models were created from CT scans, and tantalum beads were implanted into the tibia and femur of eight human cadaver knees. Each specimen was secured in a fixture, static and dynamic stereoradiographs were recorded, and the bone models and marker models were fitted to the stereoradiographs. Results. Results showed a mean difference between the two methods in all six degrees of freedom for static RSA to be within -0.10 mm/° and 0.08 mm/° with a 95% limit of agreement (LoA) ranging from ± 0.49 to 1.26. Dynamic RSA had a slightly larger range in mean difference of -0.23 mm/° to 0.16 mm/° with LoA ranging from ± 0.75 to 1.50. Conclusions. In a laboratory-controlled setting, the CT model method combined with dynamic RSA may be an alternative to previous marker-based methods for kinematic analyses. Cite this article: K. Stentz-Olesen, E. T. Nielsen, S. De Raedt, P. B. Jørgensen, O. G. Sørensen, B. L. Kaptein, M. S. Andersen, M. Stilling. Validation of static and dynamic radiostereometric analysis of the knee joint using bone models from CT data. Bone Joint Res 2017;6:376–384. DOI: 10.1302/2046-3758.66.BJR-2016-0113.R3

Background

The Manchester-Oxford Foot Questionnaire (MOxFQ) is a condition specific patient reported outcome measure (PROM) for foot and ankle surgery. It consists of 16 items across three subscales measuring distinct, but related traits: walking/standing ability, pain, and social interaction. Although it is the most used foot and ankle PROM in the UK, initial MOxFQ validation involved analysis of only 100 individuals undergoing hallux valgus surgery. This project aimed to establish whether an individual's response to the MOxFQ varies with anatomical region of disease (measurement invariance), and to explore structural validity of the factor structure (subscale items) of the MOxFQ.

PURPOSE: A new device for intraoperative pedography was developed. The purpose of this study was to validate the introduced method with standard dynamic pedography, and to analyze the clinical benefit. Methods: For an intraoperative introduction of standardized forces to the footsole, a device named Kraftsimulator Intraoperative Pedographie was developed. The validation was performed in two steps: Step 1. Comparison of standard dynamic pedography (three trials, walking, third step, three trials, mid stance force pattern), static pedography in standing position (three trials) and pedography with KIOP in healthy volunteers (three trials, total force 400 N).. Step 2. Comparison between pedography in standing position, pedography with KIOP in awake and anaesthesized patients (three trials, total force 400 N). A randomized prospective controlled study comparing treatment with and without intraoperative pedography has started on November 1, 2005. The subjects are randomized into two groups,. a) use of intraoperative pedography, versus. b) no use of intraoperative pedography. One-year-follow-up including standard dynamic pedography is planned. The following scores are used: American Orthopaedic Foot and Ankle Society (AOFAS), Visual-Analogue-Scale Foot and Ankle (VAS FA), Short-Form 36 (SF36, standardized to 100-point-maximum). Intraoperative consequences after the use of intraoperative pedography were recorded. Results: Validation Step 1: 30 individuals were included (age, 26.1±8.6 years; gender, male: female = 24: 6). Step 2: 30 individuals were included (age, 55.3±30.3 years; gender, male: female = 24: 6). No significant differences between all measurements of step 1 and 2 were found for step 1 and 2 without the dynamic platform measurements of step 1. Clinical use: 16 patients were included until January 31, 2006 (ankle correction arthrodesis, n=2; subtalar joint correction arthrodesis, n=4; arthrodesis midfoot, n=4, correction forefoot, 4; Lisfrcan-fracture-dislocation, n=2). 9 patients were randomized for the use of intraoperative pedography. The mean preoperative scores were: AOFAS: 49.6±23.7; VAS FA: 42.2±13.1; SF36: 48.1±23.2. The mean interruption of operative procedure for the intraoperative pedography was 359±34 seconds. In 4/9 cases changes were made after intraoperative pedography during the same operative procedure (correction modified, n=3; screw tightened, n=1). The follow-up has not been completed so far. Conclusion: Since no statistical significant differences were found between the measurements of intraoperative pedography in anaesthesized individuals and the standard static pedography, the introduced method can be considered to be valid for intraoperative static pedography. During the clinical use, in 44% of the cases a modification of the surgical correction were made after intraoperative pedography in the same surgical procedure

Among the advanced technology developed and tested for orthopaedic surgery, the Rizzoli (IOR) has a long experience on custom-made design and implant of devices for joint and bone replacements. This follows the recent advancements in additive manufacturing, which now allows to obtain products also in metal alloy by deposition of material layer-by-layer according to a digital model. The process starts from medical image, goes through anatomical modelling, prosthesis design, prototyping, and final production in 3D printers and in case post-production. These devices have demonstrated already to be accurate enough to address properly the specific needs and conditions of the patient and of his/her physician. These guarantee also minimum removal of the tissues, partial replacements, no size related issues, minimal invasiveness, limited instrumentation. The thorough preparation of the treatment results also in a considerable shortening of the surgical and of recovery time. The necessary additional efforts and costs of custom-made implants seem to be well balanced by these advantages and savings, which shall include the lower failures and revision surgery rates. This also allows thoughtful optimization of the component-to-bone interfaces, by advanced lattice structures, with topologies mimicking the trabecular bone, possibly to promote osteointegration and to prevent infection. IOR's experience comprises all sub-disciplines and anatomical areas, here mentioned in historical order. Originally, several systems of Patient-Specific instrumentation have been exploited in total knee and total ankle replacements. A few massive osteoarticular reconstructions in the shank and foot for severe bone fractures were performed, starting from mirroring the contralateral area. Something very similar was performed also for pelvic surgery in the Oncology department, where massive skeletal reconstructions for bone tumours are necessary. To this aim, in addition to the standard anatomical modelling, prosthesis design, technical/technological refinements, and manufacturing, surgical guides for the correct execution of the osteotomies are also designed and 3D printed. Another original experience is about en-block replacement of vertebral bodies for severe bone loss, in particular for tumours. In this project, technological and biological aspects have also been addressed, to enhance osteointegration and to diminish the risk of infection. In our series there is also a case of successful custom reconstruction of the anterior chest wall. Initial experiences are in progress also for shoulder and elbow surgery, in particular for pre-op planning and surgical guide design in complex re-alignment osteotomies for severe bone deformities. Also in complex flat-foot deformities, in preparation of surgical corrections, 3D digital reconstruction and 3D printing in cheap ABS filaments have been valuable, for indication, planning of surgery and patient communication; with special materials mimicking bone strength, these 3D physical models are precious also for training and preparation of the surgery. In Paediatric surgery severe multi planar & multifocal deformities in children are addressed with personalized pre-op planning and custom cutting-guides for the necessary osteotomies, most of which require custom allografts. A number of complex hip revision surgeries have been performed, where 3D reconstruction for possible final solutions with exact implants on the remaining bone were developed. Elective surgery has been addressed as well, in particular the customization of an original total ankle replacement designed at IOR. Also a novel system with a high-tibial-osteotomy, including a custom cutting jig and the fixation plate was tested. An initial experience for the design and test of custom ankle & foot orthotics is also in progress, starting with 3D surface scanning of the shank and foot including the plantar aspect. Clearly, for achieving these results, multi-disciplinary teams have been formed, including physicians, radiologists, bioengineers and technologists, working together for the same goal.

Background: Researchers have measured exposure to sitting using self-reported questionnaires and observational analysis. Such methods are not a reliable measure of daily exposure or sensitive enough to take into account lumbar posture when seated. Recent innovations have produced a fibre-optic goniometer (FOG) that can continuously measure sagittal lumbar posture, although this single sensor is unable to identify if the user is sitting, standing or walking. Methods: A new system was developed utilising a second FOG attached to the hip. Movement characteristics of the hip and lumbar spine were described and used to develop software to predict activity (sitting, standing, walking). Subsequently 10 participants were asked to wear the FOGs for 8 minutes whilst their behaviour was recorded using a video camera. MPEG video sequences were produced and each activity was coded at a point in time and compared against the 2 FOG software model. Results: All Participants found the system comfortable to wear. Validation of the software against the MPEG files showed high sensitivity for sitting (90%), standing (98%), and walking (95%). Positive predictive value was high for sitting (93%), standing (89%) and walking (94%). The overall agreement between video analysis and the FOG software was 92%. Conclusions: Developing the FOG has produced a practical system capable of continuously measuring sedentary workers basic activity in terms of sitting standing and walking. This novel tool will now be used in a prospective study of sedentary workers to determine the influence of seated lumbar posture on the development of LBP

There is no consensus regarding the best method of assessing outcomes after total knee arthroplasty. There are now many questionnaires in the literature, well constructed and validated in the original language. Dawson’s questionnaire (1998) is designed as a 12-item self-administered instrument, and has undergone a complete validation procedure in its original English version. Aim of this paper is to present the procedure of cultural adaptation and some data from the validation process of the Italian version of the questionnaire. Two independent translations into Italian and back-translations into English were obtained, from specialised and general translators. The material was then evaluated in a multidisciplinary panel including elderly patients. A provisional version was obtained and tested in a pilot study. Results and comments were reviewed within the panel again which came up with the final version. The questionnaire was administered to 100 patients scheduled for knee replacement. Other outcomes collected included a general health questionnaire, in its validated Italian version (SF-36), and several objective and radiographic parameters. The burden on the patient and comprehension’s difficulties were registered. Validation included the assessment of internal consistency, construct and content validity. Correlation between different parameters were investigated. Test-retest reliability was assessed on 20 patients. Comparisons with the data presented in the original paper were performed. The questionnaires were accepted favourably by the patients, even though the combination with the SF-36 increased the amount of time required for completion. Some difficulties were registered with the comprehension of the answering method, as well as of the meaning of single items. Results of the validation process were substantially equivalent to those of the original paper

Introduction

Degenerative meniscal tears are the most common meniscal lesions, representing huge clinical and socio-economic burdens. Their role in knee osteoarthritis (OA) onset and progression is well established and demonstrated by several retrospective studies. Effective preventive measures and non-surgical treatments for degenerative meniscal lesions are still lacking, also because of the lack of specific and accurate animal models in which test them. Thus, we aim to develop and validate an accurate animal model of meniscus degeneration.

Aim

In recent years, many studies on revision for infection after arthroplasty have been published. In national arthroplasty registers, revision for infection is defined as surgical debridement, with or without removal or exchange of the entire or parts of the prosthesis due to deep infection, and should be reported to the register immediately after surgery. The diagnosis of infection is made at the surgeon's discretion, based on pre- and perioperative assessment and evaluation, and is not to be corrected to the register based on peroperative bacterial cultures. Due to this lack of validation, the rate of revision for infection will only be an approximation of the true rate of periprosthetic joint infection (PJI). Our aim was to validate the reporting of infection after total hip arthroplasty, and to assess if revisions for infection actually represented true PJI.

Artificial Intelligence (AI) is becoming more powerful but is barely used to counter the growth in health care burden. AI applications to increase efficiency in orthopedics are rare. We questioned if (1) we could train machine learning (ML) algorithms, based on answers from digitalized history taking questionnaires, to predict treatment of hip osteoartritis (either conservative or surgical); (2) such an algorithm could streamline clinical consultation.

Multiple ML models were trained on 600 annotated (80% training, 20% test) digital history taking questionnaires, acquired before consultation. Best performing models, based on balanced accuracy and optimized automated hyperparameter tuning, were build into our daily clinical orthopedic practice. Fifty patients with hip complaints (>45 years) were prospectively predicted and planned (partly blinded, partly unblinded) for consultation with the physician assistant (conservative) or orthopedic surgeon (operative). Tailored patient information based on the prediction was automatically sent to a smartphone app. Level of evidence: IV.

Random Forest and BernoulliNB were the most accurate ML models (0.75 balanced accuracy). Treatment prediction was correct in 45 out of 50 consultations (90%), p<0.0001 (sign and binomial test). Specialized consultations where conservatively predicted patients were seen by the physician assistant and surgical patients by the orthopedic surgeon were highly appreciated and effective.

Treatment strategy of hip osteoartritis based on answers from digital history taking questionnaires was accurately predicted before patients entered the hospital. This can make outpatient consultation scheduling more efficient and tailor pre-consultation patient education.

Aim: The Système Française D’Arthroscopie (SFA) is a validated method of arthroscopic grading and scoring the knee OA. We have validated a modification of the SFA system for use with digital photographs of pathological samples. Material and Method: After Ethics Committee approval, both tibial plateaux and femoral condyles were collected from 84 patients undergoing total knee replacement or at post mortem. Extent and grading of cartilage changes were documented for the 4 compartments of each sample on a diagram using photographs at standard magnification and illumination, archived, (Photographic Scores). Validation obtained by direct visualisation and probing (Pathological Scores). Radiographic and Histological scoring In addition, each sample was digitally. A second observer (AY) also graded and scored photographic images for 72 compartments of the first 18 cases. Results: For each of the 4 compartments studied, scores ranged from -2.2 to +717.8, representing the full range of possible scores. A statistically significant correlation observed in the study between radiological variables and the severity of chondropathy assessed by our (SFA-path) [ P < 0.005] suggests satisfactory extrinsic validity of this scoring system. And statistically significant correlation [p> 0.0001] between the SFA Path scores of the medial compartment tibial plateau OA and Histologi-cal grade [Minkin] of the same samples. Allocation of scores to diagrams was highly repeatable (Repeatability Coefficient = 50). There was good agreement between Pathological and Photographic Scores (Repeatability Coefficient = 88). There was moderate agreement between Photographic Scores allocated by the 2 observers, with greatest agreement for low (< 200) and high (> 500) scores. Scores for each compartment correlated with scores for each of the other 3 compartments (R values 0.7 to 0.9, all P < 0.005). Conclusion: We validated our modified SFA system which permits scoring of OA severity using digital photographs of pathological samples. SFApath is reliable and repeatable scoring system Our data support the view that OA affects the entire joint, and that a single compartment (e.g. medial tibial plateau) can be taken as broadly representative of the tibiofemoral joint as a whole

Aims

Accurate skeletal age and final adult height prediction methods in paediatric orthopaedics are crucial for determining optimal timing of growth-guiding interventions and minimizing complications in treatments of various conditions. This study aimed to evaluate the accuracy of final adult height predictions using the central peak height (CPH) method with long leg X-rays and four different multiplier tables.

Abstract

Malalignment is often postulated as the main reason for the high failure rate of total ankle replacements (TARs). Only a few studies have been performed to correlate radiographic TAR malalignment to the clinical outcome, but no consistent trends between TAR alignment parameters and the clinical outcome were found. No standard TAR alignment measurement method is present, so reliable comparison between studies is difficult. Standardizing TAR alignment measurements and increasing measurable parameters on radiographs in the clinic might lead to a better insight into the correlation between malalignment and the clinical outcome. This study aims to develop and validate a tool to semi-automatic measure TAR alignment, and to improve alignment measurement on radiographs in the clinic.

A tool to semi-automatically measure TAR alignment on anteroposterior and lateral radiographs was developed and used by two observers to measure TAR alignment parameters of ten patients. The Intraclass Coefficient (ICC) was calculated and accuracy was compared to the manual measurement method commonly used in the clinic.

The tool showed an accuracy of 76% compared to 71% for the method used during follow-up in the clinic. ICC values were 0.94 (p<0.01) and higher for both inter-and intra-observer reliability.

The tool presents an accurate, consistent, and reliable method to measure TAR alignment parameters. Three-dimensional alignment parameters are obtained from two-dimensional radiographs, and as the tool can be applied to any TAR design, it offers a valuable addition in the clinic and for research purposes.

Cite this article: Bone Joint Res 2023;12(8):494–496.

Aims

This study aimed to evaluate the clinical application of the PJI-TNM classification for periprosthetic joint infection (PJI) by determining intraobserver and interobserver reliability. To facilitate its use in clinical practice, an educational app was subsequently developed and evaluated.