We treated 12 patients with multilevel stenosis of the cervical canal after spondylosis or ossification of the posterior longitudinal ligament by an expansive open-door laminoplasty, stabilised by using an anchor system. The preoperative sagittal diameter of the canal was 9.8 mm(±2.2) which was increased to 16.1 mm (±2.9) after surgery. The mean expansion ratio of the canal was 64% (42 to 100). The anchoring systems did not fail during the follow-up period (mean 29.5 months), and the decompression was maintained. The use of anchor systems to stabilise the posterior elements after laminoplasty is a simple and effective technique for maintaining the increased sagittal diameter of the canal

Minimal clinically important differences (MCID) in the scores of patient-reported outcome measures allow clinicians to assess the outcome of intervention from the perspective of the patient. There has been significant variation in their absolute values in previous publications and a lack of consistency in their calculation. The purpose of this study was first, to establish whether these values, following spinal surgery, vary depending on the surgical intervention and their method of calculation and secondly, to assess whether there is any correlation between the two external anchors most frequently used to calculate the MCID. . We carried out a retrospective analysis of prospectively gathered data of adult patients who underwent elective spinal surgery between 1994 and 2009. A total of 244 patients were included. There were 125 men and 119 women with a mean age of 54 years (16 to 84); the mean follow-up was 62 months (6 to 199) The MCID was calculated using three previously published methods. Our results show that the value of the MCID varies considerably with the operation and its method of calculation. There was good correlation between the two external anchors. The global outcome tool correlated significantly better. We conclude that consensus needs to be reached on the best method of calculating the MCID. This then needs to be defined for each spinal procedure. Using a blanket value for the MCID for all spinal procedures should be avoided. Cite this article: Bone Joint J 2015;97-B:366–71

Introduction. The Odom's criteria are, since 1958, a widely used 4-point rating scale for assessing the clinical outcome after cervical spine surgery. Surprisingly, the Odom's criteria have never been validated. The aim of this study was to investigate the reliability and validity of the Odom's criteria for the evaluation of surgical procedures of the cervical spine. Methods. Patients with degenerative cervical spine disease were included and divided into two groups, based on their most predominant symptom: myelopathy or radiculopathy. Reliability was assessed with inter-rater and test-retest design using a quadratic weighted Kappa coefficient. Construct validity was assessed by means of hypothesis testing with related constructs. To evaluate if the Odom's criteria could act as a global perceived effect (GPE) scale, we assessed concurrent validity by comparing the areas under the curves (AUCs) of the receiver operating characteristic curves (ROCs) with both the Odom's criteria, as the GPE as an anchor. Results. A total of 110 patients were included in the study. Overall inter-rater reliability was k=0.77 and the test-retest reliability k=0.93. Inter-rater reliability for the radiculopathy patients was κ=0.81 and for myelopathy patients κ=0.68. More than 75% of the hypotheses were met. The AUCs showed similar characteristics between the Odom's criteria and GPE. Conclusion. The Odom's criteria meet the predefined criteria for reliability and validity. Therefore, the Odom's criteria may be used to measure surgical outcome after a cervical spine procedure. Results of previous studies that have been deemed less trustworthy, because of the use of the Odom's criteria, should be reconsidered. No conflicts of interests. No funding obtained

Introduction. Surgical correction of spinal deformities is a challenge; segmental instrumentation controlling almost every level is the most recent approach. Correction of the deformity only through apical manipulation has many potential advantages, including little tissue disruption, less invasive intervention, preservation of spinal mobility, and vertebral growth. However, quantification of the amount of force needed to pull on the apex and its effect on translation, de-rotation, and overall correction of the curve needs to be studied. The purpose of this study is to determine the effect and amount of force needed to pull on the apex of a scoliotic deformity towards the midline, and the feasibility of use of this novel potential method of correction in the treatment of patients with adolescent idiopathic scoliosis (AIS). Methods. Measurements were taken from 20 patients with AIS treated between June, 2009, and January, 2010. There were 16 female and 4 male patients with an average age of 14.2 years (range 11–20); the coronal preoperative Cobb angle was 67° (42–108°), decreasing on bending to 39° (8–83°), and the apex of the deformity was between T6 and L2. All patients had proximal and distal anchors spanning two levels on each end; the anchors were connected by a concave rod to which the apical vertebra was pulled. We measured the distance between the rod and the apical vertebra and the rotation of the apical vertebrae. Results. In 17 patients a force of 30 lb was applied and in 14 patients the force reached 40 lb. The apical baseline distance was 20.9 mm (10–40); at 30 lb of pull it decreased to 11.9 mm (0–27) and at 40 lb it was 9.4 mm (0–23) or 55% translation. The change in apical rotation was measured in 12 patients. The apex de-rotated in 10 of 12 patients, with a mean rotation of 5.2° (2–10°). Conclusions. Apical translation, vertebral de-rotation, and scoliosis correction can be done by application of a force pulling on a convex anchor at the apex of the curve towards a concave rod. With suitable instrumentation, deformity correction via manipulation of the apical vertebral body can be a valid treatment alternative through a less invasive approach, with little anatomical, biomechanical, and growth potential disruption

Aims

The aim of this study was to compare outcomes after growth-friendly treatment for early-onset scoliosis (EOS) between patients with skeletal dysplasias versus those with other syndromes.

Aims

We compared decompression alone to decompression with fusion surgery for lumbar spinal stenosis, with or without degenerative spondylolisthesis (DS). The aim was to evaluate if five-year outcomes differed between the groups. The two-year results from the same trial revealed no differences.

Aims

This study aimed, through bioinformatics analysis and in vitro experiment validation, to identify the key extracellular proteins of intervertebral disc degeneration (IDD).

Aims

In this investigation, we administered oxidative stress to nucleus pulposus cells (NPCs), recognized DNA-damage-inducible transcript 4 (DDIT4) as a component in intervertebral disc degeneration (IVDD), and devised a hydrogel capable of conveying small interfering RNA (siRNA) to IVDD.

Pedicle screws as the principal anchors of instrumentation in correction of scoliosis as described by Suk 15 years ago have now gained a wide acceptance among deformity surgeons. Pedicles in the concavity of the major as well as compensatory curves are often dysplastic making screw placement occasionally problematic. In cases of dural ectasia with dystrophic pedicles, the transpedicular screw anchorage is sometimes impossible. In 2009 Gardner et al. presented a case of NF-1 with a troublesome cervico-thoracic kyphosis where they created distal anchors by means of laminar screw fixation. In the presentation of this case, the idea is further developed. Case. A 14 year old girl without any obvious syndromic feature underwent surgery for a 70 degree thoracic scoliosis. A preoperatively MRI showed a dural ectasia. A preoperative low dose–CT revealed dystrophic pedicles from Th4 to L4, making transpedicular screw placement problematical. The operation was performed with the aid of an O-arm. At all levels from Th2 – L2 laminar screw fixation was used. Postoperatively, low-dose CT showed excellent screw positioning with the exceptiuon of one proximal screw which compromised a foramem but, without any symptoms. The postoperative course was quite uneventful and the patient was discharged at day 5days postoperatively. The correction rate was 70%. Conclusion. In cases of scoliosis with severe dystrophic pedicles, the use of laminar screws is a good alternative to problematic transpedicular screw placement

Introduction. Thoracic pedicle screws have been proven to be safe and effective in the treatment of adolescent idiopathic scoliosis (AIS). However, the effect of the instrumentation alloy has not yet been investigated. We aimed to compare segmental versus non segmental thoracic pedicle screw instrumentation in patients with AIS. Methods. A consecutive series of 143 patients with AIS (Lenke classification 1–4) surgically treated from 1998 to 2005 by means of thoracic pedicle screws were retrospectively reviewed. Considering implant density (number of fixation anchors placed per available anchors sites; segmental =60% [S], non-segmental =60% [NS]) and implant alloy used (titanium [Ti] vs stainless steel [SS]) we divided the cohort into four groups: Ti-S (48 cases); Ti-NS (34 cases); SS-S (35 cases); and SS-NS (26 cases). Groups were similar for preoperative mean age, sex distribution, Risser sign, main thoracic curve, and thoracic kyphosis. Pearson correlation coefficient and univariate analysis of variance were used. Results. At a mean follow-up of 6·2 years (range 3–10) the overall final main thoracic curve correction was a mean of 61·4% (20–89), whereas the implant density within the major curve was 71% (15–100%). We recorded a significant correlation between implant density and percentage major curve correction (r=0·41, p<0·002); when the four groups were compared we noted that the SS-S group showed the greatest average correction (75%), followed by the Ti-S, SS-NS, and Ti-NS groups. We detected no significant differences between SS-S versus Ti-S versus SS-NS (r=0·002, p>0·05; r=0·13, p>0·05; r=0·07, p>0·01, respectively), whereas the Ti-NS group showed a statistically significant inferior percentage correction when compared with all other groups (average 52%; p<0·001). Nevertheless, no significant difference between groups was recorded on the SRS-30 assessment, showing a postoperative improvement in both self-image and satisfaction. Conclusions. When an SS instrumentation is used, non-segmental pedicle screw constructs seem to be equally effective as segmental instrumentations in obtaining satisfactory results in patients with main thoracic AIS. When the implant alloy used is titanium, an implant density of greater than 60% should be guaranteed so as to achieve similar results to those recorded in this study

Aims

The aim of this study was to compare the clinical and radiological outcomes of patients with early-onset scoliosis (EOS), who had undergone spinal fusion after distraction-based spinal growth modulation using either traditional growing rods (TGRs) or magnetically controlled growing rods (MCGRs).

Purpose of study. This study aims to establish the micro-structure of the vertebral endplate and its interface with the adjacent bone and disc in fresh, unstained tissue so that the structure can be related to normal and pathological function. Background. The endplate is key in both the mechanics, anchoring and nutrition of the disc. Understanding the detailed structure of the normal and pathological endplate is important for understanding how it achieves its functions. Advancements in imaging technology continually allow for greater understanding of biological structures. The development of two-photon fluorescence (TPF) combined with second harmonic generation (SHG), allows for the imaging of relatively thick, fresh samples without the need for staining. Methods. Bovine tail sections were sampled from the central region of the disc/vertebra interface. Samples were ground to provide a flat surface with a cross section including bone, endplate and disc. Samples were imaged using both TPF and SHG and images analysed using ImageJ. Results. The results detailed the interface between the bone, cartilage and disc. The SHG images show how the collagen fibre arrangement changes between the disc, endplate and subchondral bone. Due to its highly fluorescent nature, the interface between the calcified and non-calcified tissue was clear on TPF images. Conclusion. The application of TPF and SHG allowed us to image the endplate and its interfaces with the bone and disc in fine detail. Characterisation of these structure in healthy tissue is key to understanding how they function and are a foundation for understanding pathological changes. No conflicts of interest. Funding obtained from Orthopaedic Research UK (Reff: 524)

Aims

Anchorage of pedicle screw rod instrumentation in the elderly spine with poor bone quality remains challenging. Our study aims to evaluate how the screw bone anchorage is affected by screw design, bone quality, loading conditions, and cementing techniques.

The magnetically controlled growing rod (MCGR) system allows growth maintenance without the risk of anaesthesia, implant and wound complications associated with repeated surgeries. This is a medium-term report of the complications of MCGR from a multicentre study. Twenty-six patients from 6 spine institutes that are part of a multicentre study with prospectively collected data of minimum 24 months follow-up were assessed. Pre-operative, immediate post-operative and most recent spine radiographs were reviewed to measure the Cobb angle and the rod lengthening distance. The causes and any associated risk factors for re-operations were examined. Eleven patients required re-operation within the follow-up period, with a mean time to re-operation of 17 months after the initial surgery. Five were due to failure of rod distractions; 3 were due to failure of proximal foundation implants; 2 were due to rod breakage; and one case of superficial wound infection with failure of proximal fixation. Proximal junctional kyphosis occurred in 5 patients. Three had proximal anchor dislodgement and all five constructs were revised. This is the largest series with the longest follow-up to date. Our series show that the perception that using MCGR may reduce the frequency of re-operations may not be entirely true. This is the first report to examine the need for re-operation after MCGR implantation, and highlights the inherent risks of any surgical treatment in this group of patients despite the advantages of this new implant. Longer-term studies and comparisons with traditional growing rods are required

The current trend in kyphosis correction is for “every level” instrumentation to achieve intraoperative stability, correction, fusion and implant longevity. We evaluate the medium term follow up of a low implant density (LID) construct. All patients with adolescent kyphosis (idiopathic or Scheurmann's) on our deformity database were identified. Radiographs and records were analysed for neurological complications, correction and revision. The constructs included were all pedicle screw anchors with multiple apical chevron osteotomies and a proximal and distal “box” of 6 to 8 screws. A four rod cantilever reduction manoeuvre with side to side connectors completed the construct. Kyphosis for any other cause was excluded. Follow up less than 12 months was excluded. 23 patients were identified with an average follow up 27 months (72 to 12 months) and a mean implant density of 1.1 (53.5% of “available” pedicles instrumented). There was 1 false positive neurophysiological event without sequelae (4%). There were no proximal junctional failures (0%). There were no pseudarthroses or rod breakages (0%). There was 1 loss of distal rod capture (early set screw failure) (4%). This was revised uneventfully. There were 4 infections requiring debridement (early series). Average initial correction was 44% (77.7 degrees to 43.5 degrees) with a 1% loss of correction at final follow up (43.5 to 44.0 degrees). The fulcrum bending correction index was 107% (based on fulcrum extension radiographs). 85% of curves had a fulcrum flexibility of less than 50%. The average cost saving compared to “every level “instrumentation was £5700 per case. This paper shows that a LID construct for kyphosis has technical outcomes as good as high density constructs. The obvious limitation of the study is the small number of patients in the cohort. The infection rates have improved with changes to perioperative process in the later series of patients. We do not believe these are a consequence of the construct itself

Aims

To report the mid-term results of a modified self-growing rod (SGR) technique for the treatment of idiopathic and neuromuscular early-onset scoliosis (EOS).

During the last decade or more, the anchors used for instrumentation in scoliosis surgery are predominantly transpedicular screws, according to Suk. The long term radiographical feature of screw fixation after scoliosis surgery is not previously studied. A consecutive series of 81 cases with AIS operated on with an all screw construct has been studied by means of low dose CT postoperatively and at 2 years postoperatively. There were 67 females and 14 males, with a mean age of 18.3 ± 3 years. In 26 / 81 (32 %) there were signs of loosing of one or more screws, at a maximum 3 screws. We observed loosened screws in the upper thoracic region in 16 cases, in the thoracolumbar 6 and in lumbar area in 4. Mean pre-op Cobb angle was 56 in cases of loosening and 53 of intact screw fixation (n.s.), the correction rate was 69% in loosened vs 70% among intact screws (n.s.). In males there were signs of loosening in 8/14 (57%) and in females 18/67 (27%). Among cases with loosening, 14% had suboptimal screw positioning postoperatively, in intact cases it was observed in 11% (n.s.). In the whole group there were signs of suboptimal screw positioning 12%. Clinically, 1 case had a loosened L4 screw replaced; and at all 21/26 had no complaints and 5/26 reported minor pain or discomfort. 1/26 had a minor proximal junctional kyphosis about 10°, in 3/26 there was a pull-out of some few mms. With plain radiography loosening could be observed in 11/26 cases; 5 were in the lumbar region. In a consecutive series of 81 adolescents with idiopathic scoliosis who had underwent scoliosis surgery according to Suk, one third showed, 2 years after the intervention, some minor screw loosening, assessed by low dose CT. One patient had one lumbar screw replaced and only 5 patients reported minor discomfort. Males were more prone to develop screw loosening

Aims

The aim of this retrospective study was to compare the correction achieved using a convex pedicle screw technique and a low implant density achieved using periapical concave-sided screws and a high implant density. We hypothesized that there would be no difference in outcome between the two techniques.

Aims

Magnetically controlled growing rods (MCGR) have been gaining popularity in the management of early-onset scoliosis (EOS) over the past decade. We present our experience with the first 44 MCGR consecutive cases treated at our institution.

Introduction. Many methods are available for distal anchoring of spine-based and rib-based growing rod systems for early-onset scoliosis. One of these methods, pelvic S-hooks, was initially recommended for patients with spina bifida or for those with severe thoracolumbar curves. No study has yet analysed the clinical and radiographic effects of S-hooks on patients with rib-based instrumentation. The purpose of this study is to retrospectively review the results of S-hook pelvic fixation in patients with rib-based instrumentation. Methods. A multicentre, retrospective study, approved by the institutional review board, was undetaken in all patients treated with rib-based constructs using S-hooks for pelvic fixation. Preoperative and postoperative clinical variables, radiological measurements, and the incidence and management of complications were evaluated in patients with a minimum follow-up of 2 years. Results. 44 patients, 26 of whom were girls, were studied and had a mean age at surgery of 71 months. The most common surgical indication was progressive neuromuscular scoliosis. The average preoperative Cobb angle was 64° and at most recent follow-up (mean 45 months) was 53°. The most common construct was dual rods resting over the iliac crest without suture to the iliac crest extending from T3/T4 ribs to the pelvis using domino connectors. 45% of the patients had complications, of which S-hook migration after the initial procedures was the most common. S-hook migration was corrected at the next lengthening with repositioning of the hook to the iliac crest. No correlation was detected between the complication rates and the clinical, radiographic, and surgical technique variables evaluated. Conclusions. Control of spinal deformities without fusion presents several challenges. S-hooks can migrate off the iliac crest, requiring repositioning of implants during subsequent lengthening. This finding highlights the need to explore different fixation techniques with a stronger attachment to the iliac crest