We retrospectively reviewed 54 patients (92 hips) who underwent cementless total hip arthroplasty for bony
Heterotopic Ossification (HO) is a known complication that can arise after total elbow arthroplasty (TEA). In most cases it is asymptomatic, however, in some patients it can limit range of motion and lead to poor outcomes. The objective of this review was to assess and report incidence, risk factors, prophylaxis, and management of HO after TEA. A systematic search was conducted using MEDLINE, EMBASE, and PubMed to retrieve all relevant studies evaluating occurrence of HO after TEA. The search was performed in duplicate and a quality assessment was performed of all included studies. A total of 1907 studies were retrieved of which 45 studies were included involving 2256 TEA patients. HO was radiographically present in 10% of patients and was symptomatic in 3%. Less than 1% of patients went on to surgical excision of HO, with outcomes following surgery reported as good or excellent as assessed by range of motion and Mayo Elbow Performance Scores (MEPS). TEA due to
Aim. In surgeries on patients with advanced ligament instabilities or severe bone defects modern-generation of rotating hinged knee prostheses are one of the main options. The objective of our study is to evaluate the mid-term functional results and complications of several surgeries using this form of prosthesis. Material and Method. The rotating hinged knee prosthesis (RHKP) was applied to 208 knees of 204 patients in primary surgeries between September 2009 and December 2017, the minimum followup was 15 months (mean, 65 months; range, 15–115 months). Of the total number of female patients there were 152 (74.5%), men − 52 (25.5%). The average age of the patients was 64,6 years (from 32 to 85). The main indications for using RHKP were severe varus deformity with flexion contracture in 107 knees (51,4%), severe valgus deformity (from 20 to 50 degrees) in 54 knees (26,0 %), severe ligamentous deficiencies in 24 knees (11,5%) and
Heterotopic ossification is the formation of lamellar bone in soft tissues and is a common complication of high-energy combat injury. This disabling condition can cause pain, joint
Computer assisted total knee arthroplasty helps in accurate and reproducible implant positioning, bony alignment, and soft-tissue balancing which are important for the success of the procedure. In TKR, there are two surgical techniques one is measured resection in which bony landmarks are used to guide the bone cuts and the other is gap balancing which equal collateral ligament tension in flexion and extension is done before and as a guide to final bone cuts. Both these procedures have their own advantages and disadvantages. We retrospectively collected the data of 128 consecutive patients who underwent computer-assisted primary TKA using either a gap-balancing technique or measured resection technique. All the operations were performed by a single surgeon using computer navigation system available during a period between June 2016 to October 2016. Inclusion criteria were all patients requiring a primary TKA, male or female patients, and who have given informed consent for participation in the study. All patients requiring revision surgery of a previous implanted TKA or affected by active infection or malignancy, who presented hip
INTRODUCTION. Standing spinal alignment has been the center of focus recently, particularly in the setting of adult spinal deformity. Humans spend approximately half of their waking life in a seated position. While lumbopelvic sagittal alignment has been shown to adapt from standing to sitting posture, segmental vertebral alignment of the entire spine is not yet fully understood, nor are the effects of DEGEN or DEFORMITY. Segmental spinal alignment between sitting and standing, and the effects of degeneration and deformity were analyzed. METHODS. Segmental spinal alignment and lumbopelvic alignment (pelvic tilt (PT), pelvic incidence (PI), lumbar lordosis (LL), PI-LL, sacral slope) were analyzed. Lumbar spines were classified as NORMAL, DEGEN (at least one level of disc height loss >50%, facet arthropathy, or spondylolisthesis), or DEFORMITY (PI-LL mismatch>10°). Exclusion criteria included lumbar fusion/
Not all total hip arthroplasty cases are created equal is a maxim that holds true for both primary and revision scenarios. Complex cases involve patients presenting with compromised bone and/or soft tissue. For primary cases, these include hips with dysplasia,
Patients with longstanding hip fusion are predisposed to symptomatic degenerative changes of the lumbar spine, ipsilateral knee and contralateral hip. In such patients, conversion of hip arthrodesis to hip replacement can provide relief of such symptoms. However, this is a technically demanding procedure associated with higher complication and failure rates than routine total hip replacement. The aim of this study was to determine the early functional results and complications in patients undergoing hip fusion conversion to total hip replacement, performed or supervised by a single surgeon, using a standardised approach and uncemented implants. We hypothesised that a satisfactory functional improvement can be achieved in following conversion of hip fusion to hip replacement. Eighteen hip fusions were converted to total hip replacements. A constrained acetabular liner was used in 3 hips. Mean follow up was 5 years (2 to 15 years). Two (11%) hips failed, requiring revision surgery and two patients (11%) had injury to the peroneal nerve. Heterotopic ossification developed in 7 (39%) hips, in one case resulting in joint
Not all total hip arthroplasty cases are created equal is a maxim that holds true for both primary and revision scenarios. Complex cases involve patients presenting with compromised bone and/or soft tissue. For primary cases, these include hips with dysplasia,
Not all total hip arthroplasty cases are created equal is a maxim that holds true for both primary and revision scenarios. Complex cases involve patients presenting with compromised bone and/or soft tissue. For primary cases, these include hips with dysplasia,
Rotating Hinge total knee replacement designs are currently more frequently used for revision total knee replacement. As the designs of these implants have improved over time, the threshold for using them has been lowered. Cases of global instability and severe bone loss have not been adequately addressed by the standard use of unlinked constrained designs. Recurrent dislocation and polyethylene post failure due to cold flow and wear make the use of the unlinked designs insufficient to address the mechanical forces developed in a grossly unstable knee. The linked rotating hinge designs have been able to address global ligamentous instability in four planes. Medial-lateral instability is well addressed by these implants. In cases of severe
Background. To evaluate the causes and modes of complications after unicompartmental knee arthroplasty (UKA), and to identify its prevention and treatment method by analyzing the complications after UKA. Materials and Methods. A total of 1,576 UKAs were performed between January 2002 and December 2014 at a single-institution. Postoperative complications occurred in 89 knees (83 patients, 5.6%), and 86 of them were found in females and 3 in males. Their mean age was 61 years (range, 46 to 81 years) at the time of initial UKA and 66 years (range, 46 to 82 years) at the time of revision surgery. We analyzed the complications after UKA retrospectively andinvestigated the proper methods of treatment (Table 1). Results. A total of 89 complications (5.6%) occurred afterUKA. Regarding the type of complications after UKA, there were bearing dislocation (n=42), component loosening (n=23), 11 cases of femoral component loosening, 8 cases of tibial component loosening, and 4 cases of both femoral and tibial component loosening, periprosthetic fracture (n=6), polyethylene wear/ destruction (n=3), progression of arthritis to the other compartment (n=3), medial collateral ligament (MCL) injury (n=2), impingement (n=2), infection (n=5),
Introduction. Computer navigation systems are quite sophisticated intra-operative support systems for the precise placement of acetabular or femoral components in THA. However, few studies have addressed the clinical benefits derived from using a navigation system to achieve precise placement of the implants. The purpose of this study is to investigate the early dislocation rate of navigation-assisted primary THA through a posterior approach in order to clarify the short-term benefit of using a computer navigation system. Methods. We retrospectively reviewed the early dislocation rate (within 12 months after surgery) of 475 consecutive primary cementless or hybrid THAs with femoral head sizes ≦32mm performed via posterior approach. There were 85 men and 390 women, with a mean age of 60 years (17 to 88) at operation. Preoperative diagnoses included osteoarthritis in 384 hips, osteonecrosis in 45 hips, and others in 46 hips (ex. RA, trauma, infection, congenital disease). All THAs were planned using a 3D templating system based on the combined anteversion theory, performed by single surgeon through a posterior approach with repair of the posterior capsule, assisted by a CT-based surface matching type computer navigation system for cup implantation. All patients were directly followed up at least 1 year after surgery. We classified all 475 joints into four groups: normal or mildly deformed hips (Group A; 308 joints, ex. primary OA, Crowe group 1, osteonecrosis), moderately deformed hips (Group B; 97 joints, ex. Crowe group 2, protrusio acetabuli, Perthes like deformity), severely deformed hips (Group C; 53 joints, ex. Crowe group 3 or 4,
Introduction. The purpose of this retrospective study was to review the outcome of THA in the treatment of bilateral hip
Purpose of study. The vast majority of C2 ring fractures can be managed non-operatively but occasionally the situation precludes this and surgery is considered. Thus study reviews our indications and surgical options in this scenario. Methods. A retrospective review of patient folders and x-rays was performed of all patients with C2 traumatic spondylolisthesis that were managed surgically between 2003 and 2012. Demographic data, particularly indications for surgery, the options chosen and the clinical and radiological outcomes were analysed. Results. Six patients required surgery for a Traumatic Spondylolisthesis of the Axis during this period. Of these 6 cases, 2 were performed for failure of conservative treatment and the other 4 for associated injuries or condition (pregnancy). A variety of surgical methods were utilised including pars repair, C2-C2 posterior fusion and combined anterior C2/3 plating with posterior C1-3 fixation. Osseous healing was achieved in all patients in less than 6 months. There was one case that presented at 3 months post op with an adjacent level subluxation that required application of cones callipers until bony union. There were no infective complications, and no deterioration of neurological findings. Conclusion. Although the majority of Traumatic Spondylolisthesis of the Axis can be managed non-operatively, there are occasional non-spinal reasons to consider surgical stabilisation. There are many options but we would recommend a C2/3 fusion rather than pars repair due to the C2/3 disc trauma and inevitable
Extensor mechanism disruption in total knee arthroplasty (TKA) occurs infrequently but often requires surgical intervention. We compared two cohorts undergoing extensor mechanism allograft reconstruction, one group had an extensor mechanism rupture, and the other had a recurrent ankylosed knee. Thirteen consecutive patients with extensor mechanism disruption or
OBJECTIVE. To evaluate the results of results of total knee replacement (TKA) in stiff and Ankylosed knees. A retrospective study was done to evaluate the results of total knee arthroplasty performed on 110 knees in 69 patients with spontaneously Ankylosed knees. The reasons of
An important goal of total knee replacement is deformity correction. Arthritic narrowing can be accompanied by a fixed shortening of the collateral ligament on the same side of the narrowing. There can also be ligamentous laxity that develops in the opposite compartment. Flexion contracture can develop with tightening of the posterior capsule. Successful total knee replacement requires proper bone resection along with gap balancing and balanced collateral ligament tensioning. Beware of correctable deformities, as the collateral ligament may have kept its resting length and therefore the knee becomes stable after the bone resections are made and the spacer block is inserted to test the stability of the knee in flexion and extension. In the varus knee, the MCL may be contracted. A medial release of the superficial medial collateral ligament may be necessary. This can be done by stripping the periosteal insertion of the MCL. A stretch may be accomplished by placing a laminar spreader in the narrow medial joint space and opening the space until the MCL stretches from its insertion. This maneuver will require a further increase in polyethylene thickness height of 2 – 4mm. Krackow has also on occasion done a surgical imbrication of the LCL, if it appears attenuated on the lateral side of a severe varus deformity. For valgus deformities, the LCL, arcuate ligament and popliteus and ITB can be contracted. At this time, most authors recommend preservation of the popliteus tendon as it affects primarily the flexion gap. In extension there has been consensus that the surgeon should release what is tight. This may include the ITB release in a pie-crust fashion, or off the Gerdy's tubercle and then a selective release of the arcuate ligament complex. Krackow has also utilised tightening imbrication of the MCL if it is severely attenuated and lax. This has been used infrequently, however. To avoid overlengthening of the knee by referencing balance off of the lengthened, attenuated MCL in cases of severe valgus deformity, less release is performed and a CCK implant may be used. For severe flexion contractures, the posterior osteophytes should be first aggressively removed. The posterior joint capsule can be stripped off the distal femur and sometimes the gastrocnemius muscle insertions can be dissected free. After these maneuvers, proximal raising of the joint line by resection of the distal femur can be utilised. In
Purpose. Rotationplasty was first described in 1930 by Borggreve for treatment of limb shortening with knee
Atlanto-axial subluxation (AAS) presents with marked frequency among patients with instability in rheumatoid arthritis (RA) patients. This study investigated the morphology of the atlanto-occipital joint (AOJ) in AAS patients due to RA using computed tomography, and examined the relationship between its morphology and other radiographic results. Twenty-six consecutive patients with AAS due to RA treated by surgery were reviewed. In all patients, the AOJ was morphologically evaluated using sagittal reconstruction view on computed tomography before surgery. Moreover, the ADI value was investigated at the neutral position, and atlanto-axial angle (AAA) at the neutral and maximal flexion position in preoperative lateral cradiographs. The morphology of the AOJ was classified into three types as follows: a normal type which showed a maintenance of the joint space, a narrow type which showed a disappearance of the joint space and a fused type which showed the fusion of the AOJ. The pre-operative CT image of the AOJ demonstrated a normal type bilaterally in six cases (Group A). In 15 cases (Group B), CT image demonstrated narrowing on at least one side of the AOJ. In five cases (Group C), CT images demonstrated fusion on at least one side of the AOJ. The average ADI value at the flexion position was 10.7 mm in Group A, 11.7 mm in Group B, and 12.6 mm in Group C. There was no significant difference among those groups. The average ADI value at the neutral position before surgery was 2.8 mm in Group A, 5.9 mm in Group B, and 10.4 mm in Group C. There was no significant difference between Group A and B, and Group B and C; however, there was a significant difference between Group A and C (p < 0.004). The average AAA value was 25.3 degrees in Group A, 19.3 degrees in Group B and 3.4 degrees in Group C. There was no significant difference between Group A and B; however, there was a significant difference between Group A and C (p < 0.002), and Group B and C (p < 0.007). This study showed that fusion or