The purpose of this study was to evaluate the results of selective anatomic augmentation of partial anterior cruciate (ACL) ligament tears in 36 consecutive patients with mean 3years follow-up. Our hypothesis is that this selective augmentation of partial ACL tears could restore knee stability and function. In a consecutive series of 314 ACL reconstructions, 40 patients in which intact ACL fibers remained in the location corresponding to the anteromedial or posterolateral bundle were diagnosed perioperatively. All patients underwent selective augmentation of the torn bundle, while keeping the remaining fibers intact using autogenous hamstring graft. 38 patients (28 males, 10 females) were available with minimum 3 year follow- up. 26 cases had AM bundle tears and 12 cases had PL bundle tears respectively. Patients were assessed with International Knee Documentation Committee (IKDC) 2000 Knee Evaluation Form, Lysholm score; instrumented knee testing was performed with the arthrometer (KT 2000). Statistical analysis was performed to compare the preoperative and postoperative objective evaluation. At 3 year follow-up, 12 (31.6%) patients were graded A, 25 (65.8%) graded B and 1 C (2.6%) at IKDC objective evaluation. Lysholm's score and mean side to side instrumental laxity improved significantly. The results of anatomic single bundle augmentation in partial ACL tears are encouraging with excellent side to side laxity

Introduction. Revision total knee arthroplasy (TKA) has been often used with a metal block augmentation for patients with poor bone quality. However, bone resorption beneath metal block augmentation has been still reported and little information about the reasons of the occurrence of bone resorption is available. The aim of the current study is to identify a possibility of the potential occurrence of bone resorption beneath metal block augmentation, through evaluation of strain distribution beneath metal block augmentation in revision TKA with metal block augmentation, during high deep flexion. Materials and Method. LOSPA, revision TKA with a metal block augmentation (Baseplate size #5, Spacer size #5, Stem size Φ9, L30, Augment #5 T5) was considered in this study. For the test, the tibia component of LOSPA was implanted to the tibia sawbone (left, #3401, Sawbones EuropeAB, Malmö, Sweden), which was corresponded to a traditional TKR surgical guideline. The femoral component of LOSPA was mounted to a customized jig attached to the Instron 8872 (Instron, Norwood, MA, USA), which was designed specially to represent the angles ranged from 0° to 140° with consideration of a rollback of knee joint (Figure. 1). Here, a compressive load of 1,600N (10N/s) was applied for each angle. Strain distribution was then measured from rossete strain gauge (Half Bridge type, CAS, Seoul, Korea) together (Figure 1). Results and Discussions. The strain distribution on the cortical bone of the tibia was shown in Figure 2. The results showed that the strains on the posterior region were gradually increased from extension to high deep of the knee joint and generally larger than the other regions. In contrast to the results on the posterior region, the strains on the medial region were gradually decreased after 60° or 90° flexion position and relatively lower than the other regions. Particularly, the strains on the medial region were generally lower than 50–100 µstrain, which is known as critical value range able to inducing bone resorption, during high deep flexion. This fact indicate that a possibility of the potential bone resorption occurrence in revision TKA used with a metal block augmentation may be relatively increased in patients who are frequently exposed to a personal lifestyle history with the loading conditions of the high flexion. This study may be valuable by identifying for the first time a possibility of the potential bone resorption occurrence through evaluation of the strain distribution beneath metal block augmentation in revision TKA used with a metal block augmentation during high deep flexion. Conclusion. A possibility of the potential bone resorption occurrence in revision TKA used with a metal block augmentation may be dependent on loading patterns applied on the knee joint related to personal lifestyle history. Particularly, it may be relatively increased in patients who are frequently exposed to a personal lifestyle history with the loading conditions of the high flexion. Acknowledgements. This study was supported by a grant from the New Technology Product Evaluation Technical Research project, Ministry of Food and Drug Safety (MFDS), Republic of Korea

Aims. Tissue adhesives (TAs) are a commonly used adjunct to traditional surgical wound closures. However, TAs must be allowed to dry before application of a surgical dressing, increasing operating time and reducing intraoperative efficiency. The goal of this study is to identify a practical method for decreasing the curing time for TAs. Methods. Six techniques were tested to determine which one resulted in the quickest drying time for 2-octyle cyanoacrylate (Dermabond) skin adhesive. These were nothing (control), fanning with a hand (Fanning), covering with a hand (Covering), bringing operating room lights close (OR Lights), ultraviolet lights (UV Light), or prewarming the TA applicator in a hot water bath (Hot Water Bath). Equal amounts of TA were applied to a reproducible plexiglass surface and allowed to dry while undergoing one of the six techniques. The time to complete dryness was recorded for ten specimens for each of the six techniques. Results. Use of the Covering, OR Lights, and Hot Water Bath techniques were associated with a 25- (p = 0.042), 27- (p = 0.023), and 30-second (p = 0.009) reduction in drying time, respectively, when compared to controls. The UV Light (p = 0.404) and Fanning (p = 1.000) methods had no effect on drying time. Conclusion. Use of the Covering, OR Lights, and Hot Water Bath techniques present a means for reducing overall operating time for surgeons using TA for closure augmentation, which can increase intraoperative efficiency. Further studies are needed to validate this in vivo. Cite this article: Bone Jt Open 2022;3(8):607–610

Introduction. Revision total knee arthroplasty (TKA) has been often used with a metal block augmentation for patients with poor bone quality. However, bone defects are frequently detected in revision TKA used with metal block augmentation. This study focused on identification of a potential possibility of the bone defect occurrence through the evaluation of the strain distribution on the cortical bone of the tibia implanted revision TKA with metal block augmentation, during high deep flexion. Materials and Methods. Composite tibia finite element (FE) model was developed and revision TKA FE model with a metal block augmentation (Baseplate size #5 44AP/67ML, Spacer size #5 44AP/67ML, Stem size Φ9, L30, Augment #5 44AP/67ML thickness 5mm) was integrated with the composite tibia FE model. 0°, 30° 60°, 90°, 120° and 140° flexion positions were then considered with femoral rollback phenomenon [Fig 1.A]. A compressive load of 1,600N through the femoral component was applied to the composite tibia FE model integrated with the tibia component, sharing by the medial and lateral condyles, simulating a stance phase before toe-off [Fig 1.B]. Results and Discussions. The strain distribution on the cortical bone of the tibia was shown in [Fig 2]. The results showed that the strains on the posterior region were gradually increased from extension to high deep of the knee joint and generally larger than the other regions. This fact was favorably corresponded to the femoral rollback phenomenon in the knee joint, showing a good accuracy of our FE model. In contrast to the results on the posterior region, the strains on the medial region were gradually decreased after 60° or 90° flexion position and relatively lower than the other regions. Particularly, the strains on the medial region were generally lower than 50–100 µstrain, which is known as critical value range able to inducing bone loss, during high deep flexion. This fact indicate that a potential possibility of bone defect occurrence in revision TKA used with a metal block augmentation may be relatively increased in patients who are frequently exposed to a personal lifestyle history with the loading conditions of the high flexion. This study may be valuable by identifying for the first time a potential possibility of the bone defect occurrence through evaluation of the strain distribution beneath metal block augmentation in revision TKA used with a metal block augmentation during high deep flexion. Conclusions. A potential possibility of bone defect occurrence in revision TKA used with a metal block augmentation may be dependent on loading patterns applied on the knee joint related to personal lifestyle history. Particularly, it may be relatively increased in patients who are frequently exposed to a personal lifestyle history with the loading conditions of the high flexion. Acknowledgements. This study was supported by a grant from the New Technology Product Evaluation Technical Research project, Ministry of Food and Drug Safety (MFDS), Republic of Korea

Treatments of Chronic Acromioclavicular joint dislocation are controversial. Many procedures have been described in the past for the management of them. Treatment modalities have changed with increasing understanding of the nature of the problem, patient expectations and the biomechanics of the joint. Aim. To assess the functional outcome of the chronic AC joint dislocations treated by modified Weaver-Dunn procedure combined with Acromioclavicular joint augmentation. Material and methods. We treated 54 patients with chronic AC joint dislocation by modified Weaver-Dunn procedure with additional AC joint augmentation. We used tight rope system in 20 patients, Mersilene tape in 22 patients and no 5 Ethibond in 12 patients. Results. This Study was done between Jan 2003 to Jan 2012. Mean follow up was 20 months, mean age of the patients was 35, and male to female distribution was 48:6. We assessed them clinically and radio logically during their follow up. All patients were back to their occupation. 80% are back to their pre injury sporting activity level. The mean Disabilities of the Arm, Shoulder, and Hand (DASH) score was 10.2 points. One patient had a failure of augmentation device. Conclusion. Our study shows that chronic symptomatic AC joint dislocations, (Rockwood types III to V) Managed with modified modified Weaver-Dunn procedure with augmentation are showing good short term results. Significant improvement in the patient satisfaction, early return to work and radiological appearance

Treatments of Chronic Acromioclavicular joint dislocation are controversial. Many procedures have been described in the past for the management of them. Treatment modalities have changed with increasing understanding of the nature of the problem, patient expectations and the biomechanics of the joint. To assess the functional outcome of the chronic AC joint dislocations treated by modified Weaver-Dunn procedure combined with Acromioclavicular joint augmentation. We treated 54 patients with chronic AC joint dislocation by modified Weaver-Dunn procedure with additional AC joint augmentation. We used tight rope system in 20 patients, Mersilene tape in 22 patients and no 5 Ethibond in 12 patients. This Study was done between Jan 2003 to Jan2012. Mean follow up was 20 months, mean age of the patients was 35, and male to female distribution was 48:6. We assessed them clinically and radio logically during their follow up. All patients were back to their occupation. 80% are back to their pre injury sporting activity level. The mean Disabilities of the Arm, Shoulder, and Hand (DASH) score was 10.2 points. One patient had a failure of augmentation device. Our study shows that chronic symptomatic AC joint dislocations, (Rockwood types III to V,) Managed with modified modified Weaver-Dunn procedure with augmentation are showing good short term results. Significant improvement in the patient satisfaction, early return to work and radiological appearance

Separation of the ACL into anteromedial (AM) and posterolateral (PL) fibre bundles has been widely accepted. The bundles act synergistically to restrain anterior laxity throughout knee flexion, with the PL bundle providing the more important restraint near extension and its obliquity better restraining tibial rotational laxity. 10% of ACL injuries involve isolated rupture to one of these bundles causing patients to present with instability symptoms or pain. As knowledge about the influence of the ACL bundles on knee kinematics has increased, isolated reconstruction of either PL or AM bundle has been advocated. However only one cohort study of 17 patients has been presented in the clinical literature. KOOS (Knee Injury and Osteoarthritis Outcome Score) and IKDC (International Knee Documentation Committee Form) scores at 1yr post op were obtained for 12 patients who had undergone isolated ACL augmentation between 2007 and 2009. These were compared with previously published outcome scores for standard ACL reconstruction procedures. In addition examination under anaesthesia (EUA) assessments were analysed to see if a pattern of laxity for isolated AM and PL rupture could be determined. There were 5 patients with isolated AM bundle rupture and 7 with isolated PL bundle rupture. EUA analysis demonstrated that patients with isolated PL bundle rupture had increased pivot shift and Lachman test laxity, whereas the AM bundle rupture group had increased laxity with the anterior drawer test. Compared to previously published IKDC scores, there were no difference between isolated bundle augmentation and standard ACL reconstruction. However the KOOS scores showed significantly increased Sports function scores which was significantly better in the isolated bundle augmentations (93/100 v's 74/100). Differences between isolated AM and PL bundle reconstructions were not distinguishable. Isolated ACL bundle tears make up a significant proportion ACL injuries. Although technically more difficult than standard ACL reconstruction, isolated bundle augmentation appears to result in improved sports function when compared to standard ACL reconstruction

The primary objective of this study was to establish a safety profile for an all-arthroscopic anatomic glenoid reconstruction via iliac crest autograft augmentation for the treatment of shoulder instability with glenoid bone loss. Short-term clinical and radiological outcomes were also evaluated. This study involved a retrospective analysis of prospectively collected data for 14 patients (male 8, female 6) who were treated for shoulder instability with bone loss using autologous iliac crest bone graft between 2014 and 2018. Of 14 patients, 11 were available for follow-up. The safety profile was established by examining intra-operative and post-operative complications such as neurovascular injuries, infections, major bleeding, and subluxations. Assessment of pre-operative and post-operative Western Ontario Shoulder Instability (WOSI) index, radiographs, and CT scans comprised the evaluation of clinical and radiological outcomes. A good safety profile was observed. There was no occurrence of intraoperative complications, neurovascular injuries, adverse events, or major bleeding. One patient did develop an infection in the neurovascular injuries, adverse events, or major bleeding. One patient did develop an infection in the treated shoulder post-surgery. There were no subluxations or positive apprehension tests on clinical examination post-operatively. Short-term clinical outcomes were seen to be favorable WOSI scores at the most recent follow-up were significantly higher than pre-operative scores, with a mean increase of 39.6 ± 10.60 (p = 0.00055). The average follow-up for CT scan was 4.66 (SD± 2.33) months, where all patients showed bone graft union. Arthroscopic treatment of shoulder instability with bone loss via autologous iliac crest bone graft is shown to be a safe operative procedure that results in favorable short-term clinical and radiological outcomes. Further investigations must be done to evaluate the longevity of these positive health outcomes

This prospective study was undertaken to compare the clinical and radiological results and the in vivo stabilities of anteromedial (AM) and posterolateral (PL) bundle augmentation during anterior cruciate ligament (ACL) reconstruction. Forty-two ACL partial tears that underwent isolated bundle augmentation (22 AM and 20 PL bundles) were evaluated with a minimum follow-up of 1 year. For in vivo intraoperative stability testing, anteroposterior and external/internal rotation stabilities were measured at 0, 30, 60, and 90° of flexion using a navigation system. Ranges of motion, Lachman and pivot shift test results, Tegner activity scores, and Lysholm knee scores of the AM and PL bundle groups were compared. In addition, Telos arthrometer determined stabilities were compared. In-vivo intraoperative stability testing showed that mean preoperative anterior translation at 30° of flexion was greater in the AM group (8.7 vs. 6.5, p = 0.04), whereas mean rotational amount was larger in the PL group (by 2.9 at 0° and 3.6 at 30° of flexion). After ACL reconstruction, no significant differences were found between the two groups in terms of anterior and rotational stabilities at any flexion angle. Furthermore, clinical outcomes in the two groups were not significantly different. Lachman and pivot shift test results and instrumented laxity findings were similar for the two groups at final follow up. In this study, the authors carefully preserved the remnant injured ACL, and achieved excellent anterior stability recoveries and good rotatory stabilities. No significant intergroup difference was found in terms of intraoperative stability or clinical parameters after ACL reconstruction

Background: The results of arthroscopic anterior labral (Bankart) repair have been shown to have high failure rate in patients with significant glenoid bone loss. Several reconstruction procedures using bone graft have been described to overcome the bone loss, including autogenous coracoid transfer to the anterior glenoid (Latarjet procedure) as well as iliac crest autograft and tibial allografts. In recent years, trends toward minimally invasive shoulder surgery along with improvements in technology and technique have led surgeons to expand the application of arthroscopic treatment. Purpose: This study aims to perform a retrospective analysis of prospectively collected data to evaluate the clinical and radiological follow up of patient who underwent anatomic glenoid reconstruction using distal tibia allograft for the treatment of shoulder instability with glenoid bone loss at 1-year post operation time point. Between December 2011 and January 2015, 55 patients underwent arthroscopic stabilisation of the shoulder by means of capsule-labral reattachment to glenoid ream and bony augmentation of glenoid bone loss with distal tibial allograft for recurrent instability of the shoulder. Preoperative and postoperative evaluation included general assessment by the western Ontario shoulder instability index (WOSI) questionnaire, preoperative and postoperative radiographs and CT scans. Fifty-five patients have been evaluated with mean age of 29.73 years at time of the index operation. There were 40 males (mean age of 29.66) and 15 female (mean age of 29.93). Minimum follow up time was 12 months. The following adverse effects were recorded: none suffered from recurrent dislocation, 2 patients suffered from bone resorption but without overt instability, 1 patient had malunion due to screw fracture, None of the patients had nonunion. The mean pre-operative WOSI score was 36.54 and the mean postoperative WOSI score was 61.0. Arthroscopic stabilisation of the shoulder with distal tibia allograft augmentation demonstrates promising result at 1year follow up

Introduction. The purpose of this study was to evaluate the mid-term clinical and radiological results in patients who were managed by double metal augmentations in proximal tibial uncontained bony defects undergoing primary or revision total knee arthroplasty. Materials and Methods. We performed double metal augmentations in proximal tibial uncontained bony defects undergoing total knee arthroplasty. Out of total 14 patients, 8 patients (4 priamry arthroplasty, 4 revision arthroplasty), mean 61.3 (50–80) years, were available for review at least 5 years follow up. The average follow up period was 86.3(60–99) months. Range of motion, American Knee Society Score were evaluated pre- and postoperatively as a clinical values. Another clinical assessments undertaken at the final reviews, Western Ontario and McMaster Universities osteoarthritis index (WOMAC), Oxford knee score (OKS), Short Form-36 (SF-36), Lower extremity functional scale (LEFS), and Lower extremity activity scale (LEAS) were checked. Radiological results, involving presence of radiolucent lines (RLLs) > 1mm in width, and osteolysis at the block-cement-bone interface were taken under fluoroscopic images at postoperatively and annually thereafter. Results. At the final follow-up, range of motion was increased from 97.5° to 121.3° and American Knee society score was significantly improved from 30.4 to 92.6 (p=0.03) and functional score from 43.1 to 86.9 (p=0.03). At the final follow-up, average WOMAC score was 10(2–20), OKS was 40.5(33–47), LEFS was 55.8(34–75), and LEAS was 10.9(7–15). There was no broken or deterioration sign at between first and second metal block at radiographically. RLLs at the block-cement-bone interfaces under fluoroscopic images were examined in 3 knees, but didn't cause any failure sign such as osteolysis, or collapse, or instability at final reviews. Conclusions. The clinical and radiological evaluations showed that the double metal augmentations is a favorable and useful way to manage severe uncontained proximal tibial bony defects at least 5 years mid-term follow up period. Preoperative standing anteroposterior (AP) radiograph (Fig 1) shows severe uncontained proximal tibial bone defects, approximately 23 mm compared with unaffected lateral tibial condyle. AP view of fluoroscopy with medial double metal blocks (10 mm block + down sized 10 mm block) combined intramedullary stem at 60-month follow-up after primary total knee arthroplasty, demonstrating radiolucent line (white arrow) of 2.5 mm width bottom the block (Fig 2). AP view at 92-month follow-up indicating non-progressive stable radiolucent lines (white arrow) at same area without any radiographic failure signs and broken sign between first and second metal block (Fig 3)

Introduction. Rotator cuff tears remain a problem, with massive tears having a failure rate of repair reported of up to 60%, despite advances in surgical techniques. Tissue engineering techniques offers the possibility of regenerating damaged tendon tissue to a pre-injury state. We explore these techniques by implanting two novel tendon augmentation grafts with use of platelet rich plasma (PRP) in sheep. Methods. A total of 24 sheep were operated on, with the infraspinatus being surgically cut from its attachment to the humeral head. Each tendon was repaired using suture anchors and an interpositional implant according to 4 groups: (1) Empty control, (2) Novel collagen fibre implant with PRP (3) A novel collagen sponge implant (4) and the collagen sponge with PRP. The sheep were killed at 12 weeks and the implant site harvested and its histology evaluated. Results. Our findings showed that these novel grafts were well integrated into the tissue, with minimal inflammatory response. However, as expected, the material had not yet completely broken down. Our initial findings suggest that the combination of PRP with the collagen sponge best enhanced the repair of the tendon. Conclusion. Tissue engineered collagen graft hold great potential for the repair of tendons

Tears of the rotator cuff tendons are a very common entity. Despite recent advances in arthroscopic rotator cuff repair, the re-tear rate remains high. Thus, new methods to improve healing rates following rotator cuff repair must be sought. The purpose of this prospective randomized double-blind controlled study is to compare the functional outcomes and healing rates of an adjuvant pre-operative bone microfracture technique prior to arthroscopic cuff repair.

Patients undergoing arthroscopic rotator cuff repair were randomized to receive either a percutaneous bone microfracture of the supraspinatus footprint or a “soft tissue needling” technique, in which the pin was passed through the peripheral edges of the rotator cuff, five-seven days prior to index surgery, under ultrasound guidance. Follow-ups were completed at 3, 6, 12 and 24 months post-operatively. Healing status was determined by ultrasound at 6 and 24 months. The primary objective was to compare the WORC score at 24 months. Secondary objectives included the healing status via ultrasound, the Constant, and the ASES scores. A sample size calculation determined that 90 patients provided 80% power to detect a statistical difference between groups.

Baseline demographic data did not differ between groups. No statistical differences were detected in the WORC outcome at any time points (p=0.47, baseline, p=0.60, 3 months, p=0.79, 6 months, p=0.50, 12 months, p=0.54, 24 months). Healing rates did not differ between groups (P=0.34) and no differences were observed in the ASES or Constant Scores at all time-points. Statistically significant improvements occurred in both groups from baseline to all time points in all clinical outcome scores (p < 0 .0001).

No statistically significant differences in primary or secondary outcomes were identified between pre-operative bone microfracture and soft tissue needling techniques prior to arthroscopic rotator cuff repair. This study does not support pre-operative microfracture as a adjuvant technique prior to arthroscopic cuff repair.

Introduction

Tendon injuries remain challenging, secondary healing and prolonged immobilisation result in suboptimal outcome. Previous study by our group showed that demineralised bone matrix (DBM) can result in faster healing of a tendon enthesis. The aim of this study is to test different ways augmenting tendon with DBM to enhance tendon repair and regeneration.

Abstract. Background. The gold standard treatment for Anterior Cruciate Ligament injury is reconstruction (ACL-R). Graft failure is the concern and ensuring a durable initial graft with rapid integration is crucial. Graft augmentation with implantable devices (internal brace reinforcement) is a technique purported to reduce the risk of rupture and hasten recovery. We aim to compare the short-term outcome of ACL-R using augmented hamstring tendon autografts (internally braced with neoligament) and non-augmented hamstring autografts. Methods. This was a retrospective cohort study comparing augmented and non-augmented ACL-R. All procedures were performed in a single centre using the same technique. The Knee injury and Osteoarthritis Outcome Score [KOOS] was used to assess patient-reported outcomes. Results. There were 70 patients in the augmented and 111 patients in the control group. Mean graft diameter in the augmented group was 8.82mm versus 8.44mm in the non-augmented. Six strand graft was achievable in 73.5% of the augmented group compared to 33% in the non-augmented group. Two graft failures were reported in the non-augmented group and none in the augmented group. Patient satisfaction rates were higher in the augmented group. There was a statistically insignificant improvement in the postoperative KOOS in the augmented group compared to the non-augmented group (p 0.6). Irrespective of augmentation status, no correlation was found between the functional score and age, or femoral tunnel width. Conclusion. Augmented ACL-R may achieve superior graft diameters, lower failure rates and better patient reported outcomes when compared to nonaugmented ACL-R. Prospective trials are needed to examine this further

Introduction. Classical fixation using a circular frame involves two rings per segment and in many units this remains the norm whether using ilizarov or hexapod type frames. We present the results of two ring circular frame at King's College Hospital. Materials & Methods. A prospective database has been maintained of all frames applied since 2007. Radiographs from frames applied prior to July 2022 were examined. Clinic letters were then used to identify complications. Included: two ring hexapod for fracture, malunion, nonunion, arthrodesis or deformity correction in the lower limb. Excluded: patients under 16 years old, diabetic feet, Charcot joints, soft tissue contractures, arthrodiastasis, correction of the mid/forefoot, plate fixation augmentation, fixation off a third ring. Results. 518 two ring hexapods were identified. Mean age was 46 (16–89). 55% were for fracture, 18% for malunion, 11% for nonunion. Mean frame time was 7 months (2–29 months). All clinic letters from 384 patients showed 203 patients (52%) had at least one pin site infection, 27 nonunions (7%), 16 frame revisions (4%), 25 bone grafting procedures (7%), 5 cases of septic arthritis (1%), 3 periprosthetic fractures (0.8%),), 12 malunions (3%), 4 Amputations (1%). Conclusions. These results demonstrate the efficacy of a two ring hexapod for patients requiring reconstruction of the lower limb

Our primary objective was to compare healing rates in patients undergoing arthroscopic rotator cuff repair for degenerative tears, with and without bone channeling. Our secondary objectives were to compare disease-specific quality of life and patient reported outcomes as measured by the Western Ontario Rotator Cuff Index (WORC), American Shoulder and Elbow Surgeons (ASES) score and Constant score between groups. Patients undergoing arthroscopic rotator cuff repair at three sites were randomized to receive either bone channeling augmentation or standard repair. Healing rates were determined by ultrasound at 6 and 24 months post operatively. WORC, ASES, and Constant scores were compared between groups at baseline and at 3, 6, 12 and 24 months post operatively. One hundred sixty-eight patients were recruited and randomized between 2013 to 2018. Statistically significant improvements occurred in both groups from pre-operative to all time points in all clinical outcome scores (p < 0 .0001). Intention to treat analysis revealed no statistical differences in healing rates between the two interventions at 24 months post-operative. No differences were observed in WORC, ASES or Constant scores at any time-point. This trial did not demonstrate superiority of intra-operative bone channeling in rotator cuff repair surgery at 24 months post-operative. Healing rates and patient-reported function and quality of life measures were similar between groups

Poor availability of allografts in South Africa has led to an increased use of synthetic augmentation to stabilize knee joints in the treatment of knee dislocations. This study aims to evaluate multiligament knee injuries treated with a posterior cruciate ligament internal brace. The study included patients with knee dislocations who were treated with a PCL internal brace. The internal brace involved the insertion of a synthetic suture tape, which was drilled into the femoral and tibial footprint. Chronic injuries were excluded. Patient-reported outcome scores (PROMs), range of motion, stress X-Rays, and MRI scans were reviewed to assess outcomes. Acceptable outcomes were defined as a Lysholm score of 84 or more, with grade II laxity in no more than one ligament and a range of motion from full extension to 90° or more. The study included eight patients, with a median age of 42, of which five were female. None of the patients had knee flexion less than 90° or an extension deficit of more than 20°. PROMs indicated acceptable outcomes (EQ5D, Tegner Lysholm). Stress radiographs showed less than 7mm (Grade I) of posterior translation laxity in all patients. Four patients underwent MRI scans 1–2 years after the initial surgery, which revealed healing of the PCL in all patients. However, increased signal in a continuous ligament suggested only partial healing in two patients. Tunnel widening of 200% and 250% was noted around the tibial and femoral PCL footprints, respectively. All patients demonstrated stable knees and acceptable PROMs. Tunnel widening was observed in all patients who had MRI scans. Factors such as suspensory fixation, anisometric tunnel position, and the absence of PCL tear repair may have contributed to the tunnel widening

Ankle sprains are common injuries. Most of them involve the lateral ligament complex. 20–40%% of these injuries will go onto develop symptomatic chronic lateral instability (CLI) and require surgical intervention. The gold standard surgical treatment remains the Brostom-Gould. There are however certain scenarios where this may be unsuitable, such as in hyperlaxity, poor native tissue or revision surgeries. In these situations, a reconstruction with some form of augmentation or grafting is necessary. The anterior half of peroneus longus (AHPL) has gained in popularity as an autograft due to its favourable tendon properties, ease of harvesting, and low reported morbidity. This technique has been adopted by the senior author in these situations. Our primary aim was to assess patient reported outcomes and satisfaction following this surgery. Our secondary objectives were to assess return to sports, donor site morbidity and to report any surgical complications. We performed a retrospective single surgeon study on all patients who underwent CLI reconstruction using the anterior half of peroneus longus between 2014 and 2021. Data was collected prospectively. The Karlsson foot and ankle scoring chart as well as a simple satisfaction table were used to assess outcomes. Minimum follow up was 1 year. 44 patients met the inclusion criteria. 23 women, 21 men. The average age was 37.0 (+−13.5). 24 were very satisfied with the surgery, 10 were satisfied, 6 were fair and 4 were dissatisfied. The average Karlsson score improved from 65/90 (34–77) to 85/90 (range 45–90). The average return to sport was 5 months. There was 1 non-surgical complication recorded. There was no repeat surgery for a complication, or recurrent instability and no donor-site morbidity was reported. The results of our study demonstrates that the CLIR using AHPL is a reliable, predictable and safe

Abstract. Background. Extracorporeal radiation therapy (ECRT) has been reported as an oncologically safe and effective reconstruction technique for limb salvage in diaphyseal sarcomas with promising functional results. Factors affecting the ECRT graft-host bone incorporation have not been fully investigated. Methods. In our series of 51 patients of primary bone tumors treated with ECRT, we improvised this technique by using a modified V-shaped osteotomy, additional plates and intra-medullary fibula across the diaphyseal osteotomy in an attempt to increase the stability of fixation, augment graft strength and enhance union at the osteotomy sites. We analyzed our patients for various factors that affected union time and union rate at the osteotomy sites. Results. On univariate analysis, age <20 years, metaphyseal osteotomy site, V-shaped diaphyseal osteotomy, extramedullary plate fixation and use of additional plate at diaphyseal ostetomy had a significantly faster time to union while gender, tumor type, resection length, chemotherapy and use of intra-medullary fibula did not influence union time. In multivariate analysis, metaphyseal ostoeotomy, V-shaped diaphyseal osteotomy and use of additional plate at diaphyseal ostetomy were the independent factors with favourable time to union. Although the rate of union was higher with V-shaped diaphyseal osteotomy and use of additional plate and intra-medullary fibula at diaphyseal ostetomy, this difference could not be established statistically. None of the analyzed factors apparently affected the union rate in univariate analysis. Conclusion. Judicious choice of osteosynthesis and augmentation of ECRT graft can enhance incorporation with reduced complications and good functional outcome