Most common current surgical treatment options for cuff tear arthropathy (CTA) are hemiarthroplasty and reverse total shoulder replacement. At our unit we have been using Reverse Total shoulder replacement (TSR) for CTA patients since 2001. We present our results of Reverse TSR in 64 patients (single surgeon) with a mean follow up of 2 years (Range 1 to 8 years). There were 45 males and 19 females in the study with a mean age of 70 years. Preoperative and postoperative Constant scores were collected by a team of specialist shoulder physiotherapists. Preoperatively plain radiographs were used to evaluate the severity of arthritis and bone stock availability. 90% patients showed an improvement in the Constant score post operatively. The mean improvement in Constant score was 25 points. The mean Pain Score (max 15) improved from 6.3 to 11.8; the mean ADL Score (max 20) improved from 6.8 to 12.3; the mean Range of Motion score (max 40) improved from 10.8 to 20.2; but the mean Power Score (max 25) only improved from 0.9 to 4.9. The differences in improvement were statistically significant in each category. A total 6 patients (10%) required 10 revision surgeries for various reasons. Two patients dislocated anteriorly who were treated by open reduction. Two patients required revision of the glenoid component due to loosening after a mean of 2 years. One patient required revision of the humeral component with strut grafting secondary to severe osteolysis. Only one patient required revision of both humeral and glenoid components secondary to malpositioning. Three patients died for reasons unconnected with their shoulder problems and surgery. Radiographic analysis at the latest follow up (mean 24 months) showed inferior glenoid notching in 40% cases. Heterotrophic ossification was not seen in our series. We conclude that reverse TSR is a viable option for treatment of cuff tear arthropathy however glenoid loosening and scapular notching remains an issue

Before reverse shoulder replacement was an option for rotator cuff tear arthropathy the treatment modalities were limited to injections and physical therapy for pain control, arthroscopic debridement with or without biceps tenodesis/tenotomy and hemiarthroplasty. Functional improvement was limited with these treatment options and success for pain control was moderate at best. The destructive nature of the rotator cuff deficient shoulder continued with medialization of the glenoid and erosion of the acromion seen even after replacement with hemiarthroplasty. The end result usually left the patient with a pseudo paralysis of the shoulder region functionally and uncontrolled pain that made later revision with a reverse implant difficult or impossible. Reverse arthroplasty was released for use in United States in 2004 for rotator cuff tear arthropathy. This initial procedure had a number of related complications that have been improved on over time with changes in implant design and better operative techniques. The long term results with reverse total shoulder arthroplasty have made this the procedure of choice for contained cuff tear arthropathy

Background. Cuff tear arthropathy represents a challenging problem to the shoulder arthoplasty surgeon. Poor results of conventional total shoulder arthroplasty in cuff deficient shoulders due to glenoid component loosening have meant hemiarthroplasty has been the traditional preferred option. Recently reverse total shoulder arthroplasty (RSA) has gained increasing popularity due to a clinical perception of an improved functional outcome. This is despite the lack of comparative data, particularly in relation to modern hemiarthroplasty prostheses. The aim of this study was to compare the early functional results of Hemiarthroplasty versus RSA in the management of cuff-tear arthropathy. Material and Methods. Patients were identified from the New Zealand National Joint Registry and matched for age, sex, and American Society of Anesthesiologists scores.102 primary hemiarthroplasties performed for cuff tear arthropathy were compared with 102 RSAs performed for the same diagnosis. Oxford shoulder scores (OSS) were collected prospectively at 6 months and five years post operatively together with mortality and revision rates. Results. There were 51 males and 51 females in each group, with a mean age of 71.6 in the Hemiarthroplasty group and 72.6 in the RSA group. The mean ASA score was 2.2 in both groups. The median OSS was 31.1 in the hemiarthroplasty group and 41.1 in the RSA group. This difference was maintained at five years. At follow up, there were 7 revisions in the hemiarthroplasty group and 5 in the RSA group. No difference in mortality was seen between the two groups. Conclusion. This study provides the first direct evidence of improved functional outcome of RSA compared to Hemiarthroplasty in patients with cuff tear arthropathy. Longer-term follow up is needed to confirm that the improved function is maintained and that complications such as component loosening remain comparable

Background. Degeneration of the shoulder joint is a frequent problem. There are two main types of shoulder degeneration: Osteoarthritis and cuff tear arthropathy (CTA) which is characterized by a large rotator cuff tear and progressive articular damage. It is largely unknown why only some patients with large rotator cuff tears develop CTA. In this project, we investigated CT data from ‘healthy’ persons and patients with CTA with the help of 3D imaging technology and statistical shape models (SSM). We tried to define a native scapular anatomy that predesignate patients to develop CTA. Methods. Statistical shape modeling and reconstruction:. A collection of 110 CT images from patients without glenohumeral arthropathy or large cuff tears was segmented and meshed uniformly to construct a SSM. Point-to-point correspondence between the shapes in the dataset was obtained using non-rigid template registration. Principal component analysis was used to obtain the mean shape and shape variation of the scapula model. Bias towards the template shape was minimized by repeating the non-rigid template registration with the resulting mean shape of the first iteration. Eighty-six CT images from patients with different severities of CTA were analyzed by an experienced shoulder surgeon and classified. CT images were segmented and inspected for signs of glenoid erosion. Remaining healthy parts of the eroded scapulae were partitioned and used as input of the iterative reconstruction algorithm. During an iteration of this algorithm, 30 shape components of the shape model are optimized and the reconstructed shape is aligned with the healthy parts. The algorithm stops when convergence is reached. Measurements. Automatic 3D measurements were performed for both the healthy and reconstructed shapes, including glenoid version, inclination, offset and critical shoulder angle. These measurements were manually performed on the mean shape of the shape model by a surgeon, after which the point-to-point correspondence was used to transfer the measurements to each shape. Results. The critical shoulder angle was found to be significantly larger for the CTA scapulae compared to the references (P<0.01). When analyzing the classified scapulae significant differences were found for the version angle in the scapulae of group 4a/4b and the critical shoulder angle of group 3 when compared to the references (P<0.05). Conclusion. Patients with CTA have a larger critical shoulder angle compared with reference patients. Some significant differences are found between the scapulae from patients in different stages of CTA and healthy references, however the differences are smaller than the accuracy of the SSM reconstruction. Therefore, we are unable to conclude that there is a predisposing anatomy in terms of glenoid version, inclination or offset for CTA

Background. Absence of rotator cuff allows unbalanced muscle forces of the shoulder to cause vertical migration of the humeral head. The translation of the humerus causes impaction of articular surface against the acromion. The purpose of the study is to assess outcome of Cuff tear arthropathy (CTA) Hemiarthroplasty prosthesis in this group of patients. Methods. Retrospective review was undertaken in 42 patients who underwent Global CTA Hemiarthroplasty between Jan 2001-Jan 2009. The mean length of follow up was 6 years. Results. The patients at review showed statistically significant improvement in Forward Flexion, Abduction and Numerical Pain Rating. There were four revision surgeries and the overall survival rate at ten years was 89 %. There was statistically significant improvement (p < 0.05) in forward flexion abduction and Numerical rating scale (p 0.02). Although improvement was noted in external and internal rotation this was not statistically significant. There was one perioperative humerus fracture which required plating at the same time of surgery. The fracture went on to heal uneventfully. There was also one post-operative haematoma which required arthroscopic washout. One patient underwent further arthroscopic debridement for poor ROM which improved from 20 Abd 20 FF to 90, 90 FF, Abd. There were four revision surgeries; 3 revisions to reverse geometry replacement; and one patient had removal of implant because of persistant dislocation of implant and patient did not want another major surgery. Patients who required revision had further erosion of acromion and poor ROM of < 20 Abd, FF, and Pain 8–10/10. Conclusion. This study shows that significant improvement in pain, and movements are achieved with this device. Acromial and glenoid erosion is a potential issue with this prosthesis and three revisions were required for this this problem. The results are better than standard hemiarthroplasty when used in this setting

Cementless surface replacement arthroplasty (CSRA) is an established treatment for glenohumeral osteoarthritis. Few studies however, evaluate its role in cuff tear arthopathy. The purpose of this study is to compare the outcomes of CSRA for both glenohumeral osteoarthritis and cuff tear arthopathy.

42 CSRA with the Mark IV Copeland prosthesis were performed for glenohumeral osteoarthritis (n=21) or cuff tear arthopathy (n=21). Patients were assessed with Oxford and Constant scores, patient satisfaction, range of motion and radiologically with plain radiographs.

Mean follow-up and age was 5.2 years and 74 years in both groups. Functional outcomes were significantly higher in OA compared with CTA with OSS improving from 18 to 37.5 and 15 to 26 in both groups respectively. Forward flexion improved from 60° to 126° and 42° to 74° in both groups. Three patients in the CTA group had a deficient subscapularis tendon, two of whom dislocated anteriorly.

Humeral head resurfacing arthroplasty is a viable treatment option for glenohumeral osteoarthritis. In patients with CTA, functional gains are limited. We suggest CSRA should be considered in low demand patients where pain is the primary problem. Caution should be taken in patients with a deficient subscapularis due to the high risk of dislocation.

Purpose

The purpose of this study was to evaluate the short to mid-term results after hemiarthroplasty with extended head prosthesis (CTA head) for patients with cuff tear arthopathy.

Rotator cuff arthropathy is a challenging problem to treat in many patients whose function remains intact despite pain from arthritis. In recent years, the introduction of reverse shoulder arthroplasty has improved the function and pain in pseudoparalytic shoulders with rotator cuff deficiency. However, significant evidence exists to support the use of alternative surgical and non-surgical treatments for those patients who suffer from the pain of arthritis while maintaining an intact force-couple of the rotator cuff and relatively well preserved function.

Purpose. Glenoid version has been correlated with tears within the rotator cuff. Cuff tear arthropathy is an evolution of multiple unhealed tendons ultimately resulting in pseudoparalysis. Although several factors are critical to allow tendon healing, we have observed that there is less glenoid version in patients with cuff tear arthropathy. This was compared to those with osteoarthritis where rotator cuff tears are uncommon. We hypothesize that patients undergoing inverse prosthesis generally have a near neutral glenoid. Method. A single surgeons practice (JPW) was retrospectively reviewed for all cuff tear arthropathy and osteoarthritis patients undergoing primary shoulder arthroplasty. (Zimmer, Warsaw, IN). Glenoid version was measured by 2 fellowship trained shoulder surgeons. Inter and intra-class correlation was measured. Results. The axial CT scans of 84 patients (cuff tear arthropathy and osteoarthritis) were evaluated. Inter and intra-class correlation was excellent (0.96, 0.97). Glenoid version was between 4.1 +/− 3.6 and 16.5 +/− 8.6 degrees for cuff tear arthropathy and osteoarthritis, respectively (p < 0.0001). Conclusion. Our observation of near neutral glenoid version in patients with cuff tear arthropathy has not been reported in the literature. The anatomical version of the glenoid may be a risk factor in patients undergoing rotator cuff repair. This may predispose certain individuals to cuff tear arthropathy compared to those with increased retroversion

In recently, reverse shoulder arthroplasty for rotator cuff deficient arthritis is widely used in the world. However, a high complication rate was reported and worried about long-term results after reverse shoulder arthroplasty. From 2001, we performed a novel strategy for these cases such as rotator cuff reconstruction w/ or w/o muscle transfer and a humeral head replacement with using smallest head to decrease joint volume. The aim of this study was to investigate with clinical outcomes after this surgery more than two years follow-up. Materials & methods. Fifty six shoulders underwent humeral head replacement (HHR) with or without tendon transfer for cuff tear arthropathy was able to follow-up more than two years. The mean age was 74 years (60 to 83 years). 42 cuff tear arthropathy, 6 RA, 5 re-tear after cuff repair with arthritis, and 1 arthritis after infection were included. Coracoacromial arch preserved Superior approach with preserving coracoacromial arch was used for replacement the humeral stem and head. Almost of the cases could be repaired with using a smallest head because of the height of humeral head and joint volume were decreased. However, when rotator cuff remained in irreparable condition, a latissimus dorsi tendon or a pectoralis major tendon from same shoulder was transferred for cuff reconstruction. The patients were divided by 2 groups; 36 shoulders of HHR without tendon transfer and 20 shoulders of HHR with tendon transfer. Each patient was evaluated with Japan Orthopaedic Association score (JOA score) and modified Neer's limited goals rating scale after a least 2 year of follow-up. Results. In all cases, preoperative severe pain was dramatically improved. JOA score improve from 40.2 preoperatively to 80.2 postoperatively. Twelve shoulders estimated as excellent in modified Neer's classification, 34 in satisfactory and 10 in unsatisfactory. Half of cases with RA were unsatisfactory results. Postoperative active flexion statistically improved compared to preoperative range of motion. Averaged postoperative flexion was 136 degrees (preop.;68.8) and postoperative external rotation was 28.6 degrees (preop.;13.2). However, there was no significant difference of external rotation in the HHR group between pre and postoperative evaluation. The radiographic evaluation showed four cases of glenoid erosion. One case had arthroscopic Suprascapular nerve release eight years after surgery. Conclusions. The current results were consistent with the prior studies. Our novel strategy is considered as one of useful procedure for cuff tear arthropathy. However, the case which classified with Seebauer type IIB should not be recommended

Abstract. Background. To determine the long-term survival outcomes of Copeland Resurfacing Hemiarthroplasty (CRHA) performed by a single surgeon series. Methods. A retrospective cohort study which looked at patients who underwent CRHA over 6 years. Re-operations including revisions with component exchange taking place in our hospital and at local centres were reviewed. Oxford Shoulder Score (OSS) was used to assess their functional outcomes pre- and post-CRHA. Results. 80 CRHAs were performed in 72 patients between 2007 and 2013 with a mean follow-up of 6.5 years. The mean follow-up was 79 months (50–122). The primary indication for CRHA was osteoarthritis (76.3%), cuff tear arthropathy (16.3%), rheumatoid arthritis (5%) and post-trauma (1.3%). The mean pre-operative OSS was 16, which doubled following CRHA surgery. Fifteen patients underwent revision surgery due to ongoing glenoid pain with a mean revision time following primary CRHA being 49 months. Projected survival at the endpoints 5,7 and 10 years were 83, 81 and 79% respectively. Conclusion. This study provides us with a much longer average follow-up period in comparison to many other studies published. Previous studies, support resurfacing as a useful implant in reducing pain and improving function in the short-term; but this series demonstrates over the medium-term a relatively high revision rate of about 20% in comparison with other arthroplasty options, despite the revision rate seeming to plateau from the 5-year mark onwards

BACKGROUND:. Few studies have evaluated at a medium-term follow-up the use of semiconstrained reverse shoulder arthroplasty (RSA) for primary glenohumeral osteoarthritis, massive rotator cuff tear, or cuff tear arthropathy excluding any other shoulder disease. Moreover, data on patients' quality of life after this surgery are lacking. METHODS:. In this prospective cohort study, 80 patients were evaluated after an RSA for either primary osteoarthritis, massive rotator cuff tear, or cuff tear arthropathy with the Constant-Murley score (CMS), ROM, and Short Form Health Survey (SF-36). A radiologic assessment was performed pre- and postoperatively. RESULTS:. At a mean 5-year follow-up, the cumulative survival rate was 97.3% and significant improvements in the CMS and ROM were observed when compared with the baseline values. The CMS was 93.2% of the sex- and age-matched normal values. The postoperative SF-36 scores showed no significant differences compared with normative data. Younger patients and subjects with worse preoperative conditions achieved the greatest benefit after RSA. A 70% scapular notching rate was noted and the length of follow-up was found to be associated with the severity of scapular notching. CONCLUSIONS:. This study introduces new predictors for surgical outcomes, and it shows that patients who had undergone RSA a mean of 5 years earlier exhibit similar functionality and health-related quality of life with respect to healthy controls

Introduction. Acromial and scapular fractures are a rare but difficult complication with reverse total shoulder arthroplasty (rTSA), with an incidence rate reported from 1–10%. The risk factors associated with these fractures types is largely unknown. The goal of this study is to analyze the clinical outcomes, demographic and comorbidity data, and implant sizing and surgical technique information from 4125 patients who received a primary rTSA with one specific prosthesis (Equinoxe, Exactech, Inc) and were sorted based on the radiographic documentation of an acromial and/or scapula fracture (ASF) to identify factors associated with this complication. Methods. 4125 patients (2652F/1441M/32 unspecified; mean age: 72.5yrs) were treated with primary rTSA by 23 orthopaedic surgeons. Revision and fracture reverse arthroplasty cases were excluded. The radiographic presence of each fracture was documented and classified using the Levy classification method. 61 patients were identified as having ASF, 10 patients had fractures of the Type 1, 32 patients had Type 2, and 18 patients had Type 3 fractures according to Levy's classification. One fracture was not classifiable. Pre-op and post-op outcome scoring, ROM as well as demographic, comorbidity, implant, and surgical technique information were evaluated for these 61 patients and compared to the larger cohort of patients to identify any associations. A two-tailed, unpaired t-test identified differences (p<0.05). Results. The overall rate of ASF was 1.48% with the average time after surgery occurring at 12.9 ± 17.9 months (range 1 day to 78 months). Men had an ASF rate of 0.69% (10 of 1441); whereas women had a rate of 1.92% (51 of 2652). Patients with ASF were observed to be significantly shorter than patients without ASF (65.1 in vs 63.3 in, p=0.0004). ASF were more common in females (p=0.0019), have Rheumatoid Arthritis (p=0.0051), Cuff Tear Arthropathy (p=0.0093), or previous shoulder surgery (p=0.0189). Patient's weight did not correlate, nor did BMI. No difference was observed in humeral stem size, glenosphere diameter, or the humeral tray offset, humeral liner offset, or combined humeral tray+liner offset. The average number of screws used in the fracture group was significantly more than in the non-fracture group (p=0.0327), and 93% of patients in the fracture group had a screw in the superior hole of the baseplate. Pre-operatively, patients who developed ASF had significantly worse ASES (p=0.0104) and SPADI (p=0.0136) scores and also had significantly worse forward elevation (p=0.0237) and internal rotation (p=0.0054) than those who did not develop ASF. At latest follow-up, patients with ASF had significantly worse SST, UCLA, ASES, Constant, and SPADI scores (all p<0.0001); significantly worse abduction, forward elevation, internal rotation, strength (all p<0.0001); and significantly less preop-to-postop improvement in all measured outcomes, except for external rotation (all p<0.0001). Finally, 24% of fractures were identified as being caused by a traumatic event, 28% of patients with fractures had a previous acromioplasty, and 53% of fractures were Levy type 2. Discussion. Acromial and scapular fractures after rTSA are a rare complication, with an incidence of 1.48% in this analysis of 4125 patients with a single rTSA prosthesis. These fractures were observed to occur at an average of 12.9 months after surgery, but were observed as early as 1 day and as late as 6.5 years. Female patients, Rheumatoid Arthritis, Cuff Tear Arthropathy, previous shoulder surgery, relatively worse pre-operative ASES or SPADI scores, relatively decreased pre-operative forward elevation and internal rotation as well as a larger number of screws placed in the baseplate all were significantly associated with the occurrence of ASF. Although 93% of patients with ASF had a screw placed in the superior hole of the baseplate, we cannot conclude that this is a driving factor at this time, as the superior screw number for the non-fracture group was not recorded. Future work should evaluate if usage of a superior glenoid baseplate screw and previous acromioplasty are also risk factors for these fracture types after rTSA. This study is the largest ever performed analysis of this rare complication and provides news insight into the predisposing risk factors to consider when evaluating patients for rTSA

Reverse shoulder arthroplasty (RSA) is commonly used to treat patients with rotator cuff tear arthropathy. Loosening of the glenoid component remains one of the principal modes of failure and is the main complication leading to revision. For optimal RSA implant osseointegration to occur, the micromotion between the baseplate and the bone must not exceed a threshold of 150 µm. Excess micromotion contributes to glenoid loosening. This study assessed the effects of various factors on glenoid baseplate micromotion for primary fixation of RSA. A half-fractional factorial experiment design (2k-1) was used to assess four factors: central element type (central peg or screw), central element cortical engagement according to length (13.5 or 23.5 mm), anterior-posterior (A-P) peripheral screw type (nonlocking or locking), and bone surrogate density (10 or 25 pounds per cubic foot [pcf]). This created eight unique conditions, each repeated five times for 40 total runs. Glenoid baseplates were implanted into high- or low-density Sawbones™ rigid polyurethane (PU) foam blocks and cyclically loaded at 60 degrees for 1000 cycles (500 N compressive force range) using a custom designed loading apparatus. Micromotion at the four peripheral screw positions was recorded using linear variable displacement transducers (LVDTs). Maximum micromotion was quantified as the displacement range at the implant-PU interface, averaged over the last 10 cycles of loading. Baseplates with short central elements that lacked cortical bone engagement generated 373% greater maximum micromotion at all peripheral screw positions compared to those with long central elements (p < 0.001). Central peg fixation generated 360% greater maximum micromotion than central screw fixation (p < 0.001). No significant effects were observed when varying A-P peripheral screw type or bone surrogate density. There were significant interactions between central element length and type (p < 0.001). An interaction existed between central element type and level of cortical engagement. A central screw and a long central element that engaged cortical bone reduced RSA baseplate micromotion. These findings serve to inform surgical decision-making regarding baseplate fixation elements to minimize the risk of glenoid loosening and thus, the need for revision surgery

Background. The use of reverse total shoulder arthroplasty considerably increased since first introduced by Paul Grammont in the late 1980s. Over the past few years, results from several mid- and long-term clinical studies have demonstrated good functional outcomes and pain relief. However, several complications, especially inferior glenoid notching, and high revision rates were reported in the literature. Improvements in prosthesis design should contribute to a lower complication rate and lesser amount of glenoid erosion. Few studies have reported the clinical outcome andcomplications of Anatomical Shoulder Inverse/ Reverse Prosthesis. This study documents 2- and 6-year clinical and radiological results following reversed shoulder arthroplasty using this novel prosthesis. Methods. We report the results for sixty-eight consecutive patients (seventy shoulders) with cuff tear arthropathy (CTA) treated with Anatomical Shoulder Inverse/Reverse Prosthesis between 2006 and 2008. Two groups were defined: (A) primary treatment and (B) revision. Clinical evaluation tools comprised Constant-Murley score (CS), range of motion, and a visual analog scale to assess pain. Radiographs (anteroposterior view in neutral position) were evaluated for notching and radiolucent lines. Any complications were recorded. Results. In total, 66 shoulders (94%) with a mean follow-up of 30.0 months were initially analysed. CS increased from preoperatively 20.2 to postoperatively 53.6 points. Inferior scapular notching was identified in 58% of patients, primarily grade 1 and 2 (low-graded). 16% of patients experienced a complication, including instability, infection or periprosthetic fracture. 58 patients (83%) were re-evaluated 69.0 months after implantation. CS decreased to 50.2 points (n.s.). 16 patients (23%) had postoperative complication at final follow-up. We observed progressive radiographic changes in 75% and an increased frequency of large notches (grade 3 and 4). No significant difference regarding clinical outcome was detected between group A and B after both 2 and 6 years. Conclusion. Total shoulder arthroplasty with the Anatomical Shoulder Inverse/Reverse Prosthesis is a reliable treatment option in patients with cuff tear arthropathy. Primary and revision arthropathies result in similar improvements in range of motion and pain. Constant-Murley score and radiographic changes deteriorated with time. Inferior scapular notching appeared rapidly after implantation. A change of prosthesis design and prosthetic overhang intraoperatively seems to be the most effective way to prevent scapular conflict. The complication rate in our series is equally to previously reported rates

Surgeries for reverse total shoulder arthroplasty (RTSA) significantly increased in the last ten years. Initially developed to treat patients with cuff tear arthropathy (CTA) and pseudoparalysis, wider indications for RTSA were described, especially complex proximal humerus fractures. We previously demonstrated in patients with CTA a different sequence of muscular activation than in normal shoulder, with a decrease in deltoid activation, a significant increase of upper trapezius activation and slight utility of the latissimus dorsi. There is no biomechanical study describing the muscular activity in patients with RTSA for fractures. The aim of this work is to describe the in vivo action of RTSA in patients with complex fractures of the proximal humerus. We conducted an observational prospective cohort study comparing 9 patients with RTSA for complex humerus fracture (surgery more than 6 months, healed tuberosities and rehabilitation process achieved) and 10 controls with normal shoulder function. Assessment consisted in a synchronized analysis of range of motion (ROM) and muscular activity on electromyography (EMG) with the use of 7 bipolar cutaneous electrodes, 38 reflective markers and 8 motion-recording cameras. Electromyographic results were standardized and presented in muscular activity (RMS) adjusted with maximal isometric contractions according to the direction tested. Five basic movements were evaluated (flexion, abduction, neutral external rotation, external rotation in 90° of abduction and internal rotation in 90° of abduction). Student t-test were used for comparative descriptive analysis (p < 0,05). The overall range of motion with RTSA is very good, but lower than the control group: flexion 155.6 ± 10 vs 172.2 ± 13.9, p<0.05, external rotation at 90° 55.6 ± 25 vs 85.6 ± 8.8, p<0,05, internal rotation at 90° 37.8 ± 15.6 vs 52.2 ± 12, p<0,05. The three heads of the deltoid are more stressed during flexion and abduction in the RTSA group (p. The increased use of the 3 deltoid chiefs does not support the hypothesis proposed by Grammont when the RTSA is performed for a complex proximal humerus fracture. This can be explained by the reduced dispalcement of the rotation center of the shoulder in these patients compared to those with CTA. These patients also didn't present shoulder stiffness before the fracture. The maximal muscle activity of the trapezius in flexion and of the latissimus dorsi in flexion and abduction had not been described to date. These new findings will help develop better targeted rehabilitation programs. In addition, the significant role of the latissimus dorsi must question the risks of its transfer (L'Episcopo procedure) to compensate for external rotation deficits

The age spectrum for patients undergoing shoulder arthroplasty is broadening. Many younger patients now demonstrate shoulder pathology precluding non-arthroplasty reconstruction. The senior population is living longer and “younger”. Therefore, the demands of this patient population to participate in an active lifestyle are growing. Patients with osteoarthritis, cuff tear arthropathy, post-traumatic arthropathy, avascular necrosis, and even forms of inflammatory arthropathy present seeking not only return to simple activities of daily living but the ability to participate in aerobic recreational activities and even work activities which can stretch the limits of shoulder arthroplasty in the physiologic environment of the shoulder. This presentation will provide an overview of patient demands, concerns and activity level following shoulder arthroplasty. We will provide a prospective of allowable, recommended and discouraged activities depending on the underlying source of pathology in the type of arthroplasty implants employed. An overview of our four phases of rehabilitation protocol will be presented focusing on phase four, “work in sports hardening”

Superiorly eroded glenoids in cuff tear arthropathy represent a surgical challenge for reconstruction. The bone loss orientation and severity may influence glenoid component fixation. This computed-tomography study quantifies both the degree of erosion and orientation in superiorly eroded Favard E2 glenoids. We hypothesized that the erosion in E2 glenoids does not occur purely superiorly, rather, it is oriented in a predictable posterosuperior orientation with a largely semicircular line of erosion. Three-dimensional reconstructions of 40 shoulders with E2 glenoids (28 female, 12 male patients) at a mean age of 74 years (range, 56–88 years) were created from computed-tomography images. Point coordinates were extracted from each construct to analyze the morphologic structure. The anatomical location of the supra- and infraglenoid tubercle guided the creation of a superoinferior axis, against which the orientation angle of the erosion was measured. The direction and, thus, orientation of erosion was calculated as a vector. By placing ten point coordinates along the line of erosion and creating a circle of best fit, the radius of the circle was placed orthogonally against a chord that resulted by connecting the two outermost points along the line of erosion. To quantify the extent of curvature of the line of erosion between the paleo- and neoglenoid, the length of the radius of the circle of best fit was calculated. Individual values were compared against the mean of circle radii. The area of bony erosion (neoglenoid), was calculated as a percentage of the total glenoid area (neoglenoid + paleoglenoid). The severity of the erosion was categorized as mild (0% to 33%), moderate (34% to 66%), and severe erosion (>66%). The mean orientation angle between the vector of bony erosion and the superoinferior axis of the glenoid was 47° ± 17° (range, 14° – 74°) located in the posterosuperior quadrant of the glenoid, resulting in the average erosion being directed between the 10 and 11 o'clock position (right shoulder). In 63% of E2 cases, the line of erosion separating the paleo- and neoglenoids was more curved than the average of all bony erosions in the cohort. The mean surface area of the neoglenoid was 636 ± 247 mm2(range, 233 – 1,333 mm2) and of the paleoglenoid 311 ± 165 mm2(range, 123 – 820 mm2), revealing that, on average, the neoglenoids consume 67% of the total glenoid surface. The extent of erosion of the total cohort was subdivided into one mild (2%), 14 moderate (35%) and 25 severe (62%) cases. Using a clock-face for orientation, the average orientation of type E2 glenoid defects was directed between the 10 and 11 o'clock position in a right shoulder, corresponding to the posterosuperior glenoid quadrant. Surgeons managing patients with E2 type glenoids should be aware that a superiorly described glenoid erosion is oriented in the posterosuperior quadrant on the glenoid clock-face when viewed intra-operatively. Additionally, the line of erosion in 63% of E2 glenoids is substantially curved, having a significant effect on bone removal techniques when using commercially available augments for defect reconstruction

INTRODUCTION. Reverse shoulder arthroplasty (RSA) provides an effective alternative to anatomic shoulder replacements for individuals with cuff tear arthropathy, but certain osteoarthritic glenoid deformities make it challenging to achieve sufficient long term fixation. To compensate for bone loss, increase available bone stock, and lateralize the glenohumeral joint center of rotation, bony increased offset RSA (BIO-RSA) uses a cancellous autograft for baseplate augmentation that is harvested prior to humeral head resection. The motivations for this computational study are twofold: finite element (FE) studies of BIO-RSA are absent from the literature, and guidance in the literature on screw orientations that achieve optimal fixation varies. This study computationally evaluates how screw configuration affects BIO-RSA graft micromotion relative to the implant baseplate and glenoid. METHODS. A senior shoulder specialist (GSA) selected a scapula with a Walch Type B2 deformity from patient CT scans. DICOM images were converted to a 3D model, which underwent simulated BIO-RSA with three screw configurations: 2 divergent superior & inferior locking screws with 2 convergent anterior & posterior compression screws (SILS); 2 convergent anterior & posterior locking screws and 2 superior & inferior compression screws parallel to the baseplate central peg (APLS); and 2 divergent superior & inferior locking screws and 2 divergent anterior & posterior compression screws (AD). The scapula was assigned heterogeneous bone material properties based on the DICOM images’ Hounsfield unit (HU) values, and other components were assigned homogenous properties. Models were then imported into an FE program for analysis. Anterior-posterior and superior-inferior point loads and a lateral-medial distributed load simulated physiologic loading. Micromotion data between the RSA baseplate and bone graft as well as between the bone graft and glenoid were sub-divided into four quadrants. RESULTS. In all but 1 quadrant, APLS performed the worst with the graft having an average micromotion of 347.1µm & 355.9 µm relative to the glenoid and baseplate, respectively. The SILS configuration ranked second, having 211.2 µm & 274.4 µm relative to the glenoid and baseplate. AD performed best, allowing 247.4 µm & 225.4 µm of graft micromotion relative to the glenoid and baseplate. DISCUSSION. Both APLS and SILS techniques are described in the literature for BIO-RSA fixation; however, the data indicate that AD is superior in its ability to reduce graft micromotion, and thus some revision to common practices may be necessary. While these micromotion data are larger than data in the extant RSA literature, there are several factors that account for this. First, to properly model the difference between locking and compression screws, we simulated friction between the compression screw heads and baseplate rather than a tied constraint as done in other studies, resulting in larger micromotion. Second, the trabecular bone graft is at greater risk of deforming than metallic spacers used when studying micromotion with glenosphere lateralization, increasing graft deflection magnitude. Future work will investigate the effects of various BIO-RSA variables. For any figures or tables, please contact authors directly

Introduction. Reverse shoulder prosthesis has been developed to treat the clinical and pathological condition noted as cuff tear arthropathy (CTA). The current models of reverse shoulder arthroplasty (RSA) expose the procedure to the risk of scapular notching, possibly leading to loosening of the glenoid. Aim. The purpose of this study was to report updated results at a minimum follow-up of four years of 25 patients underwent reverse shoulder arthroplasty between 2006 and 2010 with an eccentric 36-mm glenoid component (SMR Lima). Methods. Clinical and radiographic evaluation was performed preoperatively and at every year of follow-up. All patients were evaluated with MRI or CT scan preoperatively and with X-ray examinations postoperatively to evaluate the presence of inferior scapular notching. To value the clinical outcome the Constant score and VAS score have been evaluated preoperatively and every year of follow up. Results. Since the last report the mean Constant remain stable (63.11±8.92) and the mean VAS score decreased to 1.75±2.38 (p<0.005). Radiographs showed one case of grade 1 inferior scapular notching at 7-year follow-up. Notching didn't have any influence on clinical outcome. In two patients radiolucent lines were visible around the central peg or screws. No patient had glenoid baseplate loosening or baseplate failure. Conclusion. Satisfactory results have been achieved in the treatment of cuff-deficient shoulder conditions with reverse shoulder arthroplasty using an eccentric glenosphere at medium follow up. The patients have maintained their improved function with durable clinical and radiographic results at a minimum of four years