Aims. The survival of humeral hemiarthroplasties in patients with relatively intact glenoid cartilage could theoretically be extended by minimizing the associated postoperative glenoid erosion. Ceramic has gained attention as an alternative to metal as a material for hemiarthroplasties because of its superior tribological properties. The aim of this study was to assess the in vitro wear performance of ceramic and metal humeral hemiarthroplasties on natural glenoids. Methods. Intact right cadaveric shoulders from donors aged between 50 and 65 years were assigned to a ceramic group (n = 8, four male cadavers) and a metal group (n = 9, four male cadavers). A dedicated shoulder wear simulator was used to simulate daily activity by replicating the relevant joint motion and loading profiles. During testing, the joint was kept lubricated with diluted calf serum at room temperature. Each test of wear was performed for 500,000 cycles at 1.2 Hz. At intervals of 125,000 cycles, micro-CT scans of each glenoid were taken to characterize and quantify glenoid wear by calculating the change in the thickness of its articular cartilage. Results. At the completion of the wear test, the total thickness of the cartilage had significantly decreased in both the ceramic and metal groups, by 27% (p = 0.019) and 29% (p = 0.008), respectively. However, the differences between the two were not significant (p = 0.606) and the patterns of wear in the specimens were unpredictable. No significant correlation was found between cartilage wear and various factors, including age, sex, the size of the humeral head, joint mismatch, the thickness of the native cartilage, and the surface roughness (all p > 0.05). Conclusion. Although ceramic has better tribological properties than metal, we did not find evidence that its use in hemiarthroplasty of the shoulder in patients with healthy cartilage is a better alternative than conventional metal humeral heads. Cite this article: Bone Joint J 2024;106-B(11):1273–1283

Purpose:. Tuberosity healing in hemiarthroplasty for proximal humerus fractures remains problematic. Improved implant design and better techniques for tuberosity fixation have not been met with improved clinical results. The etiology for tuberosity failure is multifactorial; however thermal injury to host bone is a known effect of using polymethylmethacrylate for implant fixation. We hypothesized that the effect of thermal injury at the tuberosity shaft junction could be diminished by utilizing an impaction grafting technique for hemiarthroplasty stems. Methods:. Five matched pairs of cadaveric humeri were skeletonized and hemiarthroplasty stems were implanted in the proximal humeri in two groups. The first group had full cementation utilized from the surgical neck to 2 cm distal to the stem (cement group) and the second group had distal cementation with autologous cancellous bone graft impacted in the proximal 2.5 cm of the stem (impaction grafting group). Thermocouples were used to measure the inner cortical temperature at the tip of the stem, surgical neck, and at the level of the cement-graft interface for both treatment groups (see Fig. 1). Experiments were initiated with the humeri fully submerged in 0.9% sodium chloride and all three thermocouples registering a temperature of 37 ± 1°C. Statistical analyses were performed with a one-sided, paired t-test. Results:. The maximum recorded cortical bone temperature at the surgical neck was significantly decreased by 23% from 52.4 ± 8.1°C in the cement group to 40.4 ± 4.8°C in the impaction grafting group (p = 0.037). We identified no significant differences in maximum recorded temperature at the cement-graft interface between the impaction grafting group (44.3 ± 6.3°C) and the cement group (47.4 ± 6.4°C) (p = 0.254). A similar finding was observed between groups at the tip of the hemiarthroplasty stem (impaction grafting group 54.2 ± 5.7°C; cemented group 52.3 ± 7.3°C, p = 0.303). Conclusion:. Given the known threshold of 47°C as the onset of permanent thermal injury to bone,. 1. impaction grafting maintains the temperature at the surgical neck during cementation below this critical value. Impaction grafting may serve as a beneficial surgical technique to mitigate the effects of thermal injury on tuberosity healing in proximal humeral hemiarthroplasty for fracture

Introduction. Hemiarthroplasty is a treatment option for comminuted fractures and non-unions of the distal humerus. Unfortunately, the poor anatomical fit of off-the-shelf distal humeral hemiarthroplasty (DHH) implants can cause altered cartilage contact mechanics. The result is reduced contact area and higher cartilage stresses, thus subsequent cartilage erosion a concern. Previous studies have investigated reverse-engineered DHH implants which reproduce the shape of the distal humerus bone or cartilage at the articulation, but still failed to match native contact mechanics. In this study, design optimization was used to determine the optimal DHH implant shape. We hypothesized that patient-specific optimal implants will outperform population-optimized designs, and both will optimize simple reverse-engineered designs. Methods. The boney geometries of six elbow joints were created based on cadaver arm CT data using a semi-automatic threshold technique in 3D Slicer. CT scans were also obtained with the elbows denuded and disarticulated, such that the high contrast between hydrated cartilage and air could be exploited in order to reconstruct cartilage geometry. Using this 3D model data, finite element contact models were created for each elbow, where bones (distal humerus, proximal ulna and radius) were modelled as rigid surfaces covered by non-uniform thickness layers of cartilage. Cartilage was modelled as a Neo-Hookean hyperelastic material (K = 0.31 MPa, G = 0.37 MPa), and frictionless contact was assumed. In order to simulate hemiarthroplasty, the distal humerus cartilage surface was replaced by either a rigid surface in the shape of the subchondral bone (bone reverse engineered or BRE design), or a surface offset from the bone by some distance, which was defined parametrically and modified by an optimization algorithm. Simple flexion-extension with constant balanced muscle loads was simulated in ABAQUS (Fig 1), and resulting contact areas and contact stresses were calculated. For each specimen, the contact mechanics of the intact and DHH reconstructed joints were calculated. A design optimization algorithm in Matlab was used to determine the optimal offset distance which resulted in contact stress distributions on the ulna and radius which most closely resembled their intact conditions. This procedure was repeated in order to generate specimen-optimal offsets, as well as population-optimal offsets. Results. The population-optimal offset distance was 0.72 mm; whereas the specimen-optimal offsets ranged from 0.52 to 1.04 mm. Compared to the BRE design, which is effectively an offset distance of 0 mm, contact area generally increased at both the ulna (Fig 2) and radius (Fig 3) when either optimized design was used. On average, the specimen-optimal implant designs yielded only slightly larger contact areas than the population-optimal offsets, and only at mid-flexion (40–60 deg). Neither optimization strategy increased contact areas to those of the intact joint. Conclusions. Design optimization is a promising technique for improving patient-specific implants by offering customization in terms of contact mechanics, instead of simply reproducing osseous geometry. In this study, our models predict a large increase in contact area if optimal offsets are used when designing subject-specific DHH, and a population-optimal offset distance seems to be just as good as a subject-optimal offset. For any figures or tables, please contact authors directly (see Info & Metrics tab above).

This study reviews the early results of Distal Humeral Hemiarthroplasty(DHH) for distal humeral fracture and proposed a treatment algorithm incorporating the use of this technique in the overall management of distal humeral fractures.

DHH was performed on 30 patients (mean 65 years; 29-91) for unreconstructable fractures of the distal humerus or salvage of failed internal fixation. A triceps on approach was used in six and an olecranon osteotomy in 24. A Sorbie Questor prosthesis (Wright Medical Technology) was used in 14 patients and a Latitude (Tornier) in 16. Clinical review at a mean of 25 months (3–88) included the American Shoulder and Elbow Surgeons elbow outcomes instrument (ASES), Mayo Elbow Performance Index (MEPI) and radiological assessment.

At follow up of 28 patients mean flexion deformity was 25 degrees, flexion 128 degrees, range of pronosupination 165 degrees, mean ASES 83, MEPI 77 and satisfaction 8/10. Acute cases scored better than salvage cases. Re- operation was required in 16 patients (53%); two revisions to a linked prosthesis for periprosthetic fracture and aseptic loosening at 53 and 16 months, 12 metalwork removals and four ulnar nerve procedures. Posterolateral rotatory instability was present in one elbow, four had laxity and mild pain on loading (two with prosthesis or pin loosening), four had laxity associated with column fractures (two symptomatic) and 10 had asymptomatic mild laxity only. The triceps on approach had worse instability and clinical scores. Uncomplicated union occurred in all olecranon osteotomies and 86% of column fractures. One elbow had an incomplete cement mantle and seven had lucencies >1 mm; one was loose but acceptable. Five prostheses were in slight varus. Two elbows had early degenerative changes and 15 developed a medial spur on the trochlea.

This is the largest reported experience of DHH. Early results of DHH show good outcomes after complex distal humeral fractures, despite a technically demanding procedure. Better results are obtained for treatment in the acute setting and with use of an olecranon osteotomy. As a result of this experience anatomical and clinical pre-requisites and advise on technique are outlined. An algorithm for use of DHH in relation to total elbow arthroplasty and ORIF for the treatment of complex intra-articular distal humeral fractures with or without column fractures is proposed.

Introduction The aim of this study was to assess shoulder hemiarthroplasty for non-reconstructable proximal humeral fractures at a minimum of 12 months and identify factors that aid prognosis.

Methods Patients with a displaced fracture requiring shoulder hemiarthroplasty were studied. Patients were treated using the Neer or Osteonics prosthesis and the decision for hemiarthroplasty was made at the time of surgery. Post-operative management was standardised. An independent functional assessment, record review creating a physiological index on co-morbidities, and a radiological analysis were carried out. Survival analysis was performed for one and five year results and data was analysed by linear regression to identify prognostic factors. From 163 patients there were 138 fitting the criteria, 42 males and 96 females, average age of 68.5 (range 30 to 90) years and follow-up of 6.3 (range 1 to 15) years. The fracture pattern was three or four part in 133 cases and five head split fractures; 58 were associated with dislocation.

Results Survival was 96.4% one year and 93.6% five years, with no significant difference between prostheses. There were eight revisions, (one deep infection, four dislocations and three peri-prosthetic fractures), by 12 months. The average Constant score was 67.1 at one year. Prognostic factors at presentation were patient age and physiological index. At three months factors were implant position, tuberosity union, persistent neurological deficit and any complication.

Conclusion Overall optimum outcome was in patients aged 55 to 60, with minimal co-morbidities and an uncomplicated recovery.

In relation to the conduct of this study, one or more of the authors is in receipt of a research grant from a non-commercial source.

Aims. Arthroplasties of the elbow, including total elbow arthroplasty, radial head arthroplasty, distal humeral hemiarthroplasty, and radiocapitellar arthroplasty, are rarely undertaken. This scoping review aims to outline the current research in this area to inform the development of future research. Methods. A scoping review was undertaken adhering to the Joanna Briggs Institute guidelines using Medline, Embase, CENTRAL, and trial registries, limited to studies published between 1 January 1990 and 7 February 2021. Endnote software was used for screening and selection, and included randomized trials, non-randomized controlled trials, prospective and retrospective cohort studies, case-control studies, analytical cross-sectional studies, and case series of ten or more patients reporting the clinical outcomes of elbow arthroplasty. The results are presented as the number of types of studies, sample size, length of follow-up, clinical outcome domains and instruments used, sources of funding, and a narrative review. Results. A total of 362 studies met the inclusion criteria. Most were of total elbow arthroplasty (246; 68%), followed by radial head arthroplasty (100; 28%), distal humeral hemiarthroplasty (11; 3%), and radiocapitellar arthroplasty (5; 1%). Most were retrospective (326; 90%) and observational (315; 87%). The median sample size for all types of implant across all studies was 36 (interquartile range (IQR) 21 to 75). The median length of follow-up for all studies was 56 months (IQR 36 to 81). A total of 583 unique outcome descriptors were used and were categorized into 18 domains. A total of 105 instruments were used to measure 39 outcomes. Conclusion. We found that most of the literature dealing with elbow arthroplasty consists of retrospective observational studies with small sample sizes and short follow-up. Many outcomes have been used with many different instruments for their measurement, indicating a need to define a core set of outcomes and instruments for future research in this area. Cite this article: Bone Joint J 2022;104-B(10):1148–1155

Severe glenoid bone loss in patients with osteoarthritis with intact rotator cuff is associated with posterior glenoid bone loss and posterior humeral subluxation. Management of severe glenoid bone loss during shoulder arthroplasty is controversial and technically challenging and options range from humeral hemiarthroplasty, anatomic shoulder replacement with glenoid bone grafting or augmented glenoid component implantation, to reverse replacement with reaming to correct version or structural bone grafting or metallic augmentation of the bone deficiency. Shoulder replacement with severe glenoid bone loss is technically challenging and characterised by higher rates of complications and revisions. Hemiarthroplasty has limited benefit for pain relief and function especially if eccentric glenoid wear exists. Bone loss with >15 degrees of retroversion likely requires version correction include bone-grafting, augmented glenoid components, or reverse total shoulder replacement. Asymmetric reaming may improve version but is limited to 15 degrees of version correction in order to preserve subchondral bone and glenoid bone vault depth. Bone-grafting of glenoid wear and defects has had mixed results with graft-related complications, periprosthetic radiolucent lines, and glenoid component failure of fixation. Implantation of an augmented wedge or step polyethylene glenoid component improves joint version while preserving subchondral bone, but is technically demanding and with minimal short term clinical follow-up. A Mayo study demonstrated roughly 50% of patients with posteriorly augmented polyethylene had radiolucent lines and 1/3 had posterior subluxation. Another wedge polyethylene design had 66% with bone ingrowth around polyethylene fins at 3 years. Long term outcomes are unknown for these new wedge augmented glenoid components. Reverse shoulder arthroplasty avoids many risks of anatomic replacement glenoid component fixation and stability but is associated with a high complication rate (15%) including neurologic and baseplate loosening and often requires structural bone grafting behind the baseplate with suboptimal outcomes or metallic augmented baseplates with limited evidence and short term outcomes. Reverse replacement with baseplate bone grafting or metal augmentation is technically challenging due to limited native glenoid bone stock available for baseplate component ingrowth and long term fixation. Failure to correct glenoid superior inclination and restore neutral version within 10 degrees increases the risks of reverse baseplate failure of fixation, pull out, and failure of reverse replacement. Reverse baseplate failure rates in patients with severe glenoid bone loss and concomitant glenoid bone grafting range from 5–11%. The minimum native glenoid bony contact with the baseplate is unknown but likely is approximately 1cm of native bone contacting a central ingrowth post and a minority (∼15–25%) of native glenoid contacting the backside of the baseplate. Failure to correct posterior bone loss can lead to retroversion of the baseplate, reduced external rotation, posterior scapular notching, and posteromedial polyethylene wear. In summary, shoulder replacement with severe glenoid bone loss is technically challenging and characterised by higher rates of complication and revision

Aims

The aim of this audit was to assess and improve the completeness and accuracy of the National Joint Registry (NJR) dataset for arthroplasty of the elbow.

Aims

A review of the literature on elbow replacement found no consistency in the clinical outcome measures which are used to assess the effectiveness of interventions. The aim of this study was to define core outcome domains for elbow replacement.

Aims

The aim of this study was to review the provision of total elbow arthroplasties (TEAs) in England, including the incidence, the characteristics of the patients and the service providers, the types of implant, and the outcomes.

Thirty years ago, rotator cuff surgery was exceedingly uncommon and shoulder arthroplasty almost unknown. Surgery for shoulder instability was largely empirical, non-anatomical and frequently unsuccessful. With the help of arthroscopy and MR scanning, a complex array of labral, ligament and tendon pathologies can now be recognised and treated, precisely and predictably. Anatomy-restoring arthroscopic techniques have largely replaced open stabilisation surgery. As life expectancy rises and citizens remain active into their seventh and eighth decades, the call for rotator cuff surgery has risen dramatically. Complex tendon transfers have expanded the indications for cuff surgery. Open repair has in part been supplanted by increasingly sophisticated arthroscopic techniques. The potential use of orthobiologics and stem cells promises further advances in the foreseeable future. Following the successful development of humeral hemiarthroplasty, and later of total shoulder replacement, surgical techniques and clinical indications for arthroplasty are now well refined. Predictable outcomes have been further enhanced by the present generation of ‘anatomic’ prostheses. More recently, the ‘rediscovery’ and improvement of semi-constrained (reverse) prostheses has transformed the previously dismal outlook for sufferers of cuff arthropathy and similar conditions. Many Australian Orthopaedic Association trainees undertake post-specialisation fellowships in shoulder surgery, both at home and abroad, and there is a steady flow of young overseas fellows through Australian shoulder units. The Shoulder and Elbow Society of Australia, founded in 1990 as a loose grouping of interested colleagues, now boasts over 70 active members. Australian surgeons and researchers are well represented in the prestigious Journal of Shoulder and Elbow Surgery and Australian shoulder surgery has come of age

Aims

The aim of this study was to investigate the feasibility of application of a 3D-printed megaprosthesis with hemiarthroplasty design for defects of the distal humerus or proximal ulna following tumour resection.

The June 2023 Shoulder & Elbow Roundup³⁶⁰ looks at: Proximal humerus fractures: what does the literature say now?; Infection risk of steroid injections and subsequent reverse shoulder arthroplasty; Surgical versus non-surgical management of humeral shaft fractures; Core outcome set needed for elbow arthroplasty; Minimally invasive approaches to locating radial nerve in the posterior humeral approach; Predictors of bone loss in anterior glenohumeral instability; Does the addition of motor control or strengthening exercises improve rotator cuff-related shoulder pain?; Terminology and diagnostic criteria used in patients with subacromial pain syndrome.

Aims

The aims of this study were to identify and evaluate the current literature examining the prognostic factors which are associated with failure of total elbow arthroplasty (TEA).

Shoulder resurfacing arthroplasty is a bone conserving option for patients with glenohumeral arthritis. We report the early results of this procedure at our unit with a minimum follow up of 2 years (mean follow up of 36 months). A historical analysis of prospectively collected clinical data was reviewed on a consecutive series of 22 patients (mean age of 73 years) with end stage gleno-humeral arthrosis who had undergone humeral resurfacing hemiarthroplasty performed by a single surgeon. Pain and function were assessed using the Oxford shoulder score and patient satisfaction was recorded. Radiographs were evaluated for implant loosening. 82% of patients had significant improvement in their oxford shoulder score from pre-operatively to two years post-operatively. Complications included one case of intra-operative conversion to a stemmed hemiarthroplasty due to fracture of the humeral head, one case of adhesive capsulitis that required MUA and arthroscopic capsular release and two cases of revision to a total shoulder replacement for pain. Humeral resurfacing arthroplasty is a viable treatment option for glenohumeral arthritis with good short term results