Introduction

Studies have addressed the issue of increasing prevalence of work-related musculoskeletal (MSK) pain among different occupations. However, contributing factors to MSK pain have not been fully investigated among orthopaedic surgeons. Thus, this study aimed to approximate the prevalence and predictors of MSK pain among Saudi orthopaedic surgeons working in Riyadh, Saudi Arabia.

Musculoskeletal (MSK) disorders continue to be a major cause of pain and disability worldwide. The mission statement of the Canadian Orthopaedic Association (COA) is to “promote excellence in orthopaedic and musculoskeletal health for Canadians,” and orthopaedic surgeons serve as leaders in addressing and improving musculoskeletal health. However, patients with MSK complaints most commonly present first to a primary care physician. According to a survey of family physicians in British Columbia, 13.7-27.8% of patients present with a chief complaint that is MSK-related (Pinney et Regan, 2001). Therefore, providing excellent MSK care to Canadians requires that all physicians, especially those involved in primary care, be adequately trained to diagnose and treat common MSK conditions. To date, there has been no assessment of the total mandatory MSK training Canadian family medicine residents receive. It is also unclear, despite the prevalence of MSK complaints among Canadian patients, if current family physicians are competent or confident in their ability to provide fundamental MSK care. The purpose of this study is to determine the amount of mandatory MSK training Canadian family medicine residents are currently receiving. Web-based research was used to determine how many weeks of mandatory MSK training was incorporated into current Canadian family medicine residency training programs. This information was gathered from either the Canadian Resident Matching Service website (carms.ca) or the residency program's individual website. If this information was not available on a program's website, a program administrator was contacted via email in order to ascertain this information directly. MSK training was considered to be any rotation in orthopaedic surgery, spine surgery, sports medicine, or physiatry. 156 Canadian family medicine residency training sites were identified. Information pertaining to mandatory MSK education was collected for 150 sites (95.5%). Of the 150 training sites, 102(68 %) did not incorporate any mandatory MSK training into their curriculum. Of the 48 programs that did, the average number of weeks of MSK training was 3.37 weeks. 32/48 programs (66.7%) included 4 weeks of MSK training, which represents 3.8% of a 2-year training program. Current Canadian family medicine residents are not receiving sufficient musculoskeletal training when compared to the overall frequency of musculoskeletal presentations in the primary care setting. Understanding current family medicine physicians’ surveyed confidence and measured competence with respect to diagnosing and treating common musculoskeletal disorders could also prove helpful in demonstrating the need for increased musculoskeletal education. Future orthopaedic initiatives could help enhance family medicine MSK training

Introduction. In January 2000, the Bone and Joint Decade was formally launched at the headquarters of the World Health Organization in Geneva, Switzerland. The goal was “to improve the health-related quality of life for people with musculoskeletal disorders throughout the world”. They aimed to do this, in part, by “raising awareness of the growing burden of musculoskeletal disorders on society”. The Bone and Joint Decade has 63 supporting governments, over 700 supporting government and non-government organisations and a budget in the millions. It was the largest musculoskeletal health promotion campaign in history. Aim. To determine the impact of the Bone and Joint Decade on the International Press. Methods. LexisNexisTM Professional search engine utilised to retrieve articles from all known English language national newspapers internationally containing the term “Bone and/& Joint Decade” from January 1999 to January 2010. Results. Only 56 articles were found from the all the worlds English language national newspapers. These came from 13 countries; only 2 were part of the EU. Australia mentioned it most- 12 times in 10 years. The Bone & Joint Decade was the main topic of the article in only 23%. In only 48% was the role of the Bone and Joint Decade mentioned- in 20% of these its role was incorrectly quoted. In only 23% was someone from the organisation quoted and in only 27% was a medical professional quoted. The portrayal of the Bone and Joint Decade was of a neutral tone-93%, positive tone-2% and a negative tone-5%. Conclusions. The Bone and Joint Decade has ended and very few were made aware that it started. The media coverage of the largest musculoskeletal health campaign in history has been woefully inadequate

Repetitive manual handling caused 31% of all work related musculoskeletal disorders in 2015, with the back being the site of injury 38% of the time. Despite its high resilience, studies have shown that intervertebral discs can be damaged during repetitive loading at physiological motions, causing cumulative damage and disc herniation. To understand the mechanism of disc injury resulting from repetitive lifting, it is important to measure disc deformations/strains accompanied by MRI imaging to identify disc tissue damage. Therefore, the aim of this study was to examine associations between the magnitude of 3D internal strains, tissue damage and macroscopic evidence of disc injury after simulated repetitive lifting on normal human lumbar discs. Sixteen cadaver lumbar functional spinal units (FSUs) were subjected to pre-test MRI. Eight FSUs (control) underwent 20,000 cycles or until failure (5 mm displacement) of loading under compression (1.7 MPa – to simulate lifting a 20 kg weight) + flexion (13°) + right axial rotation (2°) using a novel Hexapod Robot. The remaining eight FSUs (experimental) had a grid of tantalum wires inserted, and stereoradiographs were taken to track internal disc displacements at increasing cyclic intervals. Maximum shear strains (MSS) were calculated from the displacements using radiostereometric analysis at cycle 1 and 20,000 cycles (or failure). Post-test MRI was conducted to determine the extent of tissue damage and associated with regions of highest MSS. A repeated measures ANOVA was performed on MSS with a within–subjects factor of cycle number (cycle 1 and failure cycle) and a between subjects-factor of disc region and failure type (p < 0 .05). Pfirrmann grading revealed mostly normal discs [I (N=2), II (N=13), and III (N=1)]. No significant difference in MSS between control and experimental groups was found for number of cycles to failure (p=0.279). Pre and post-test MRI analysis revealed that 13 specimens were injured after repetitive lifting with either an endplate failure (N=9) or disc bulge (N=4), and two specimens did not fail. Failure strain was significantly greater than cycle 1 in all regions except posterior, left/right posterolateral (p>0.109). Largest MSS at failure was seen in the anterior (60%), and left/right posterolateral regions (64% and 70%, respectively). MSS at failure for the endplate failure group was significantly larger than the no injury group in all regions except right lateral and nucleus (p>0.707). Disc bulge group MSS was significantly larger than the no injury group in the anterior, right anterolateral, and left/right posterolateral regions (p < 0 .027). Simulated repetitive lifting led to largest shear strains in the anterior, left and right posterolateral regions that corresponded to annular tears or annular protrusion. The no injury group shear strain was less than 50% in all regions, indicating there may be a threshold that could be associated with tissue damage linked with injuries such as disc bulge and endplate failure. There was no evidence of disc herniation in normal discs, agreeing with current clinical knowledge. These results may be indicative of the effects of repetitive manual handling on normal discs of younger patients

Despite the high prevalence of musculoskeletal disorders seen by primary care physicians, numerous studies have demonstrated deficiencies in the adequacy of musculoskeletal education at multiple stages of medical education. The aim of this study was to assess a newly developed undergraduate module in musculoskeletal medicine. Methods. A two-week module in musculoskeletal medicine was designed to cover common musculoskeletal disorders that are typically seen in primary care. A previously validated examination in musculoskeletal medicine was used to assess the cognitive knowledge of ninety-two students on completion of the module. A historical control group (seventy-two students) from a prior course was used for comparison. Results. The new module group (2009) performed significantly better than the historical (2006) control group in terms of score (62.3% versus 54.3%, respectively; p < 0.001) and pass rate (38.4% versus 12.5%, respectively; p = 0.0002). In a subgroup analysis of the new module group, students who enrolled in the graduate entry program (an accelerated four-year curriculum consisting of students who have already completed an undergraduate university degree) were more likely to perform better in terms of average score (72.2% versus 57%, respectively; p < 0.001) and pass rates (70.9% versus 21.4%, respectively; p < 0.001) compared with students who had enrolled via the traditional undergraduate route. In terms of satisfaction rates, the new module group reported a significantly higher satisfaction rate than that reported by the historical control group (63% versus 15%, respectively; p < 0.001). Conclusions. In conclusion, the musculoskeletal module described in this paper represents an educational advance at undergraduate level as demonstrated by the improvement in scores in a validated examination. As pressure on medical curricula grows to accommodate advancing medical knowledge, it is important to continue to improve, assess, and consolidate the position of musculoskeletal medicine in contemporary medical education

The objective of this study was to quantify the burden of musculoskeletal disorders (MSDs) on the Ontario health care system. Specifically, we examined the magnitude and costs of MSD-associated ambulatory physician care and hospital service use, considering different physician types (e.g. primary care, rheumatologists, orthopaedic surgeons) and hospital settings (e.g. emergency department (ED), day surgery, inpatient hospitalizations). Administrative health data were analyzed for fiscal year 2013/14 for adults aged 18+ years (N=10,841,302). Data sources included: Ontario Health Insurance Plan Claims History Database, which captures data on in- and out-patient physician services, Canadian Institute for Health Information (CIHI) Discharge Abstract Database, which records diagnoses and procedures associated with all inpatient hospitalizations, and CIHI National Ambulatory Care Reporting System, which captures data on all emergency department (ED) and day surgery encounters. Services associated with MSDs were identified using the single three digit International Classification of Diseases (ICD) version 9 diagnosis code provided on each physician service claim for outpatient physician visits and the “most responsible” ICD-10 diagnosis code recorded for hospitalizations, ED visits and day surgeries. Patient visit rates and numbers of patients and visits were tabulated according to care setting, patient age and sex, and physician specialty. Direct medical costs were estimated by care setting. Data were examined for all MSDs combined as well as specific diagnostic groupings, including a comprehensive list of both trauma and non-trauma related conditions. Overall, 3.1 million adult Ontarians (28.5%) made 8 million outpatient physician visits associated with MSDs in 2013/14. These included 5.6 million primary care visits, nearly 15% of all adult primary care visits in the province. MSDs accounted for 560,000, 12.3%, of all adult ED visits. Patient visit rates to the ED for non-trauma spinal conditions were the highest of all MSDs at 1032 per 100,000 population, accounting for 23% of all MSD-related ED visits. Osteoarthritis had the highest rate of inpatient hospitalization of all MSDs at 340 per 100,000 population, accounting for 42% of all MSD-related admissions. Total costs for MSD-related care were $1.6 billion, with 12.6% of costs attributed to primary care, 9.2% to specialist care, 8.6% to ED care, and 61.2% of total costs associated with inpatient hospitalizations. Costs due to ‘arthritis and related conditions’ as a group accounted for 40.1% of total MSD costs ($966 million). Costs due to non-trauma related spinal conditions accounted for 10.5% ($168 million) of total MSD costs. All trauma-related conditions (spine and non-spine combined) were responsible for 39.4% ($627 million) of total MSD costs. MSD-related imaging costs for patients who made physician visits for MSDs were $169 million. Including these costs yields a total of $1.8 billion. MSDs place a significant and costly burden on the health care system. As the population ages, it will be essential that health system planning takes into account the large and escalating demand for MSD care, both in terms of health human resources planning and the implementation of more clinically and cost effective models of care, to reduce both the individual and population burden

Introduction. Stand to sit pelvis kinematics is commonly considered as a rotation around the bicoxofemoral axis. However, abnormal kinematics could occur for patients with musculoskeletal disorders affecting the hip-spine complex. The aim of this study is to perform a quantitative analysis of the stand to sit pelvis kinematics using 3D reconstruction from bi-planar x-rays. Materials and Methods. Thirty healthy volunteers as a control group (C), 30 patients with hip pathology (Hip) and 30 patients with spine pathology (Spine) were evaluated. All subjects underwent standing and sitting full-body bi-planar x-rays. 3D reconstruction was performed in each configuration and then translated such as the middle of the line joining the center of each acetabulum corresponds to the origin. Rigid registration quantified the finite helical axis (FHA) describing the transition between standing and sitting with two specific parameters. The orientation angle (OA) is the signed 3D angle between FHA and bicoxofemoral axis and the rotation angle (RA) represents the signed angle around FHA. Pelvic incidence, sacral slope and pelvic tilt were also measured. After checking normality of distribution, parameters were compared statistically between the 3 groups (p<0.05). Results. The mean value of the orientation angle in control group was −1.8° (SD 10.8°, range −26° to 25°). The mean value of the OA was 0.3° (SD 12.3°, range to −31° to 37°) in Hip group and −4.7° (SD 21.5°, range −86° to 38°) in Spine group. There was no significant difference in mean OA among groups. However, the more subnormal and abnormal patients were in Spine group compared to C and Hip groups. The mean value of the rotation angle in C group was 18.1° (SD 9.1°, range 5° to 43°). There was significant difference in RA between Hip and Spine groups (21.1° (SD 8.0°) and 16.0° (SD 10.7°), respectively) (p=0.04). Conclusion. This study highlights new informations obtained by the quantitative analysis of pelvis rotation between standing and sitting in healthy, hip pathology patients and spine pathology patients using 3D reconstruction from bi-planar radiographs. Hip and spine pathologies affect stand to sit pelvic kinematics. Surgeons should be aware of potential abnormal stand to sit transition in such clinical situations. This improved assessment of the pelvic rotational adaptation could lead to a more personalized approach for the planning of hip prostheses

Aims

This study explored the shared genetic traits and molecular interactions between postmenopausal osteoporosis (POMP) and sarcopenia, both of which substantially degrade elderly health and quality of life. We hypothesized that these motor system diseases overlap in pathophysiology and regulatory mechanisms.

Introduction. The pathophysiology of osteonecrosis of femoral head (ONFH) is uncertain for most cases with speculation of vascular impairment and changes in cell biology due to multi-factorial etiologies including corticosteroid, alcohol, smoking, trauma, radiation or caisson disease and genetic. Extracorporeal shockwave therapy (ESWT) began with an incidental observation of osteoblastic response pattern during animal studies in the mid-1980 that generated an interest in the application of ESWT to musculoskeletal disorders. The mechanism of shockwave therapy is not fully understood but several reports showed better clinical outcomes and promoted bone remodelling and regeneration effect of the femoral head after ESWT in ONFH. Therefore, we compared the clinical results of the use of extracorporeal shock wave therapy (ESWT) on the patients with ONFH in radiographic staging. Methods. We evaluated 24 patients with 32 hip joints diagnosed ONFH treated with ESWT from 1993 to 2012. Average follow-up period was 27 months, and patients were average 47.8 aged. Association Research Circulation Osseous (ARCO) staging system was used to grade radiographic stage before treatment. All the patients were divided to two groups; group 1 (ARCO stage I,II), group 2 (ARCO stage III). Comparative analysis was done between two groups with visual analogue scale (VAS) score and Harris hip score (HHS) at pre-treatment, 3, 6, 12 and 24 months after treatments. The failure was defined when radiographic stage was progressed or arthroplasty surgery was needed due to clinical exacerbation. Results. Two groups showed all clinical improvements with VAS scoring at final follow-up (group 1: mean 6.3 to 1.6, p < 0.001; group 2: mean 7.1 to 3.3, p < 0.001). With HHS, group 1 showed a significant improvement from 64.4 to 95.4 (p < 0.001), while no significance in group 2 (p = 0.280). At final-follow-up, 3 hips of group 1 and 1 hip of group 2 showed radiographic improvement, but 2 patients were performed total hip arthroplasty due to persistent pain and dysfunction. Discussion and Conclusion. ESWT could be considered as an alternative option before surgical treatment in patients not only with early stage of ONFH but also with mid stage

Orthopaedic reconstruction procedures to combat osteoarthritis, inflammatory arthritis, metabolic bone disease and other musculoskeletal disorders have increased dramatically, resulting in high demand on the advancement of bone implant technology. In the past, joint replacement operations were commonly performed primarily on elderly patients, in view of the prosthesis survivorship. With the advances in surgical techniques and prosthesis technology, younger patients are undergoing surgeries for both local tissue defects and joint replacements. This patient group is now more active and functionally more demanding after surgery. Today, implanted prostheses need to be more durable (load-bearing), they need to better match the patient's original biomechanics and be able to survive longer. Additive manufacturing (AM) provides new possibilities to further combat the problem of stress-shielding and promote better bone remodelling/ingrowth and thus long term fixation. This can be accomplished by matching the varying strain response (stiffness) of trabecular or subchondral bone locally at joints. The purpose of this research is therefore to determine whether a porous structure can be produced that can match the required behaviour and properties of trabecular bone regardless of skeletal location and can it be incorporated into a long-term implant. A stochastic structure visually similar to trabecular bone was designed and optimised for AM (Figure 1) and produced over a range of porosities in multiple materials, Stainless Steel 316, Titanium (Grade 23 – Ti6Al4V ELI) and Commercially Pure Titanium (Grade 2) using a Renishaw AM250 metal additive manufacturing system. Over 150 cylindrical specimens were produced per material and subjected to a compression test to determine the specimens' Elastic Modulus (Stiffness) and Compressive Yield Strength. Micro-CT scans and gravimetric analysis were also performed to determine and validate the specimens' porosity. Results were then graphed on a Strength vs. Stiffness Ashby plot (Figure 2) comparing the values to those of trabecular bone in the tibia and femur. It was found that AM can produce porous structures with an elastic modulus as low as 100 MPa up to 2.7 GPa (the highest stiffness investigated in this study). Titanium structures with a stiffness <500MPa had compressive strengths towards the bottom range of similar stiffness trabecular bone. Between 500 MPa − 1 GPa Titanium AM porous structures match the compressive strength of equivalent stiffness trabecular bone and from 1 GPa − 2 GPa the Ti structures exceed the strength of equivalent stiffness trabecular bone up to ∼2.5 times and consequently increase by a power law. These results show that AM can produce structures with similar stiffness to trabecular bone over a range of skeletal locations whilst matching or exceeding the compressive strength of bone. The results have not yet taken into account fatigue life with the fatigue life of these types of structures tending to be between 0.1 – 0.4 of their compressive strength. This means that a titanium porous structure would need to be 2.5 – 10 times stiffer or stronger than the portion of trabecular bone it is replacing. This data is highly encouraging for AM manufactured, bone stiffness matched implant technology

Background. Replacing bone lost as a consequence of trauma or disease is a major challenge in the treatment of musculoskeletal disorders. Tissue engineering strategies seek to harness the potential of stem cells to regenerate lost or damaged tissue. Bone marrow aspirate (BMA) provides a promising autologous source of skeletal stem cells (SSCs) however, previous studies have demonstrated that the concentration of SSCs required for robust tissue regeneration is below levels present in iliac crest BMA, emphasising the need for cell enrichment strategies prior to clinical application. Aims. To develop a novel strategy to enrich skeletal stem cells (SSCs) from human BMA, clinically applicable for intra-operative orthopaedic use. Methods. Iliac crest BMA was purchased from commercial suppliers and femoral canal BMA was obtained with informed consent from older patients undergoing total hip replacement. 5 to 40ml of BMA was processed to obtain 2–8 fold volume reductions. SSC function was assessed by assays for fibroblastic colony-forming units (CFU-F). Cell viability and seeding efficiency of processed and unprocessed aspirates applied to allograft was assessed. Results. Iliac crest BMA from 15 patients was enriched for SSCs in a processing time of only 15 minutes. Femoral BMA from 15 patients in the elderly cohort was concentrated up to 5-fold with a corresponding enrichment of viable, functional SSCs as confirmed by flow cytometry, CFU-F assays and histological analysis. The SSC enrichment of bone marrow aspirate significantly enhanced cell seeding efficiency onto allograft confirming the utility of this approach for application to bone regeneration. Conclusion. The ability to rapidly enrich BMA demonstrates the potential of this strategy for intra-operative application to enhance bone healing. The development of this device offers immediate potential for clinical application to reduce morbidity in many scenarios associated with local bone stock loss. Further analysis in vivo is ongoing prior to clinical tests

Metal-on-metal hip resurfacing prostheses are a relatively recent intervention for relieving the symptoms of common musculoskeletal diseases such as osteoarthritis. While some short term clinical studies have offered positive results, in a minority of cases there is a recognised issue of femoral fracture, which commonly occurs in the first few months following the operation. This problem has been explained by a surgeon's learning curve and notching of the femur but, to date, studies of explanted early fracture components have been limited. Tribological analysis was carried out on fourteen retrieved femoral components of which twelve were revised after femoral fracture and two for avascular necrosis (AVN). Eight samples were Durom (Zimmer, Indiana, USA) devices and six were Articular Surface Replacements (ASR, DePuy, Leeds, United Kingdom). One AVN retrieval was a Durom, the other an ASR. The mean time to fracture was 3.4 months. The AVNs were retrieved after 16 months (Durom) and 38 months (ASR). Volumetric wear rates were determined using a Mitutoyo Legex 322 co-ordinate measuring machine (scanning accuracy within 1 micron) and a bespoke computer program. The method was validated against gravimetric calculations for volumetric wear using a sample femoral head that was artificially worn in vitro. At 5mm. 3. , 10mm. 3. , and 15mm. 3. of material removal, the method was accurate to within 0.5mm. 3. Surface roughness data was collected using a Zygo NewView500 interferometer (resolution 1nm). Mean wear rates of 17.74mm. 3. /year were measured from the fracture components. Wear rates for the AVN retrievals were 0.43mm. 3. /year and 3.45mm. 3. /year. Mean roughness values of the fracture retrievals (PV = 0.754, RMS = 0.027) were similar to the AVNs (PV = 0.621, RMS = 0.030), though the AVNs had been in vivo for significantly longer. Theoretical lubrication calculations were carried out which found that in both AVN retrievals and in seven of the twelve cases of femoral fracture the roughening was sufficient to change the lubrication regime from fluid film to mixed. Three of these surfaces were bordering on the boundary lubrication regime. The results show that even before the femoral fracture, wear rates and roughness values were high and the implants were performing poorly

Identifying the core competencies of musculoskeletal medicine has been the basis for the development of the Australian Musculoskeletal Education Competencies (AMSEC) project. AMSEC aims to ensure Australian health professionals are suitably equipped through improved and appropriate education to address the increasing burden of both acute and chronic musculoskeletal disease. The AMSEC project has consisted of four distinct phases. The first two phases were consultative and highlighted concerns from medical educators, specialists and students that current curricula inadequately address the increasing scientific information base in MSK medicine and management. In phase three, Multidisciplinary Working Groups were established to detail competencies in MSK areas such as physical examination, red flag emergencies, basic and clinical science, patient education and self-management, procedural skills and rehabilitation and a web portal was developed. Phase four will see the core competencies completed, endorsed by the relevant professional colleges and integrated into Australian Medical School curricula. By bringing together experts from different groups involved in musculoskeletal education, it has been possible to agree on the core competencies required of a graduating medical student and from these determine the required underlying basic knowledge, skills and attitudes. These competencies are based on actual needs determined from current disease impact studies and the experience of professionals working in the various areas of musculoskeletal related clinical practice. This multidisciplinary and multi-professional approach, which includes consumer groups, has allowed a broader and more complete perspective of requirements. Both improved horizontal and vertical integration are facilitated and more efficient implementation is possible. By linking these core competencies to specific anatomy and basic science knowledge requirements, justification of the need to address current deficits in these areas was achieved. A standardised evidenced based approach to physical examination was developed allowing a unified approach to the resourcing and teaching of this skill by orthopaedic surgeons, rheumatologists and others. The ability to outline competency requirements vertically from medical student to resident, general practitioner and specialist is greatly facilitated by combining specialist educators with those of the universities and general practitioners. For the specialists, this approach yields excellent education leverage for very little additional effort. AMSEC has undertaken significant inter and intra disciplinary consultations to identify and classify core MSK competencies at a basic, median and advanced level of specialisation across professions. This novel national integrated model to address education needs offers many benefits and could be translated into other areas of medicine

[Introduction]. Rapid increase of aged population has been one of major issue affecting national health care plan in Japan. In 2006, Japanese Orthopaedic Association indicated a new clinical entity of musculoskeletal ambulation disorder symptom complex (MADS) to define the higher risk of fall and ambulatory disability in the elderly population caused by musculoskeletal disorders. Osteoarthritis of the knee is one of major cause of MADS. The number of patients with MADS underwent total knee arthroplasty (TKA) had been increased in Japan, and also expected to increase worldwide in the near future. The effectiveness of TKA for the patient with MADS would be a key issue for the patient satisfaction in TKA. In the present study, we analyzed the influence of pre-operative factors on the ambulatory functions in the patients of primary TKA. [Material & Method]. 132 patients with osteoarthritic knees implanted with posterior-stabilized (PS) TKAs were subjected to this study. There were 113 female and 19 male patients. The mean age of the patients was 73.6 years (range, 59 to 87 years). Patients were pre-operatively subjected to 2 functional performance tests which were essential tests for MADS diagnosis. Firstly, 3 meter timed up and go test (TUG) was used to evaluate ambulation ability. Secondary one leg standing time (ST) with open eyes was measured with both operated and non-operated leg to assess balancing ability. MADS was diagnosed if TUG and ST were not less than 11 seconds and/or less than 15 seconds respectively. The influence of each pre-operative factor was evaluated simple linear regression analysis (p < 0.05). Pre-operative factors consisted of age, sex, weight, height, BMI, standing femoro-tibial angle (FTA) and active knee range of motion. [Results]. Pre-operatively, 74% of the patients was diagnosed as MADS, with the results of 64, 74 and 64% of the patient matched to the MADS criteria with the evaluation of TUG and ST with operated and non-operated leg respectively (Fig 1). Firstly, pre-operative TUG was found to be negatively correlated to the weight (R = −0.25), ST with non-operated leg (R = −0.24) and active knee flexion angle (R = −0.28, Fig 2). Secondary, ST with operated leg was significantly affected by age (R = −0.32), standing FTA (R = −0.38) and ST with non-operated leg (R = 0.66, Fig 3). [Discussion & Conclusion]. As much as 74% of our patients was suffered from MADS before primary TKA. Majority of patient had both ambulatory and balancing disability with higher risk of fall and ambulatory dysfunction. We found ST with non-operated leg significantly affected both TUG representing ambulatory function and ST representing balancing function. This means the contra-lateral lower extremity function would play an important role on the pre-operative functional ability in the patient of TKA. Furthermore, we found pre-operatively that active knee flexion influenced ambulatory function, and coronal knee deformity deteriorated balancing ability. Then we should evaluate these pre-operative factors in analyzing the effectiveness of TKA on the functional recovery in the elderly patient underwent primary TKA

Introduction. Rapid increase of aged population has been one of major issue affecting national health care plan in Japan. In 2006, Japanese Orthopaedic Association proposed the clinical entity of musculoskeletal ambulation disorder symptom complex (MADS) to define the elderly population with high risk of fall and ambulatory disability caused by musculoskeletal disorders. Osteoarthritis of the knee is one of major cause of MADS. The number of patients with MADS underwent total knee arthroplasty (TKA) had been increased in Japan, and also expected to increase worldwide in the near future. The effectiveness of TKA for the patient with MADS has not been well evaluated. In the present study, we analyzed the early post-operative functional recovery after TKA using 2 simple performance tests to diagnose MADS. Material & Method. Fifty patients with varus type osteoarthritic knees implanted with posterior-stabilized (PS) TKAs were subjected to this study. There were 44 female and 6 male patients. The mean age of the patients was 71.6 years (range, 59 to 84 years). Patients were subjected to 2 functional performance tests which were essential tests for MADS diagnosis. Firstly, 3 meter timed up and go test (TUG) was used to evaluate ambulation. Secondary one leg standing time with open eyes was measured to assess balancing ability. 2 tests were performed pre-operatively, 2 weeks after surgery and at discharge (23.8 days po). MADS was defined to be diagnosed if TUG and one leg standing time was not less than 11 seconds and/or less than 15 seconds respectively. Each parameter was compared among at above mentioned three time points -using a repeated measured analysis of variance (p<0.05). Results. The number of the patients with MADS were 37, 44 and 38 in 50 patient pre-operatively, 2 weeks after surgery and at hospital discharge respectively. Mean TUG was 12.9, 16.9 and 14.0 sec. respectively [fig 1]. TUG significantly increased during 2 weeks after TKA, followed by significant decrease at discharge. There were no significant improvements in ambulation during hospital stay. Mean one leg standing time with operated and non-operated side leg at three time points were 11.0, 12.4, 17.9 sec, and 18.4, 17.9, 24.2 sec. each respectively [fig 2]. There were no significant improvements during initial 2 weeks after surgery. Significant increase of one leg standing time was found after 2 weeks, and balancing ability was found to be improved during hospital stay. Discussion & Conclusion. Although both parameters assessing ambulatory and balancing function were found to be improved post-operative 2 weeks, still as much as 76% of patients were suffered from MADS at hospital discharge in our patient population. These results indicate that the patient after TKA has still exposed to high risk of fall and ambulatory dysfunction at discharge. We should reconsider the appropriate rehabilitation protocol especially for the elderly patient with MADS to meet with patient expectation and enhance early post-operative care

Aims

To assess the impact of the declaration of the state of emergency due to the COVID-19 pandemic on the number of visits to a traumatology emergency department (ED), and on their severity.

Tendinopathy is a debilitating musculoskeletal condition which can cause significant pain and lead to complete rupture of the tendon, which often requires surgical repair. Due in part to the large spectrum of tendon pathologies, these disorders continue to be a clinical challenge. Animal models are often used in this field of research as they offer an attractive framework to examine the cascade of processes that occur throughout both tendon pathology and repair. This review discusses the structural, mechanical, and biological changes that occur throughout tendon pathology in animal models, as well as strategies for the improvement of tendon healing.

Cite this article: Bone Joint Res 2014;3:193–202.

Non-tuberculous mycobacterial (NTM) infection of the musculoskeletal tissue is a rare disease. An early and accurate diagnosis is often difficult because of the indolent clinical course and difficulty of isolating pathogens. Our goal was to determine the clinical features of musculoskeletal NTM infection and to present the treatment outcomes. A total of 29 patients (nine females, 20 males between 34 and 85 years old, mean age 61.7 years; 34 to 85) with NTM infection of the musculoskeletal system between 1998 to 2011 were identified and their treatment retrospectively analysed. Microbiological studies demonstrated NTM in 29 patients: the isolates were Mycobacterium intracellulare in six patients, M. fortuitum in three, M. abscessus in two and M. marinum in one. In the remaining patients we failed to identify the species. The involved sites were the hand/wrist in nine patients the knee in five patients, spine in four patients, foot in two patients, elbow in two patients, shoulder in one, ankle in two patients, leg in three patients and multiple in one patient. The mean interval between the appearance of symptoms and diagnosis was 20.8 months (1.5 to 180). All patients underwent surgical treatment and antimicrobial medication according to our protocol for chronic musculoskeletal infection: 20 patients had NTM-specific medication and nine had conventional antimicrobial therapy. At the final follow-up 22 patients were cured, three failed to respond to treatment and four were lost to follow-up. Identifying these diseases due the initial non-specific presentation can be difficult. Treatment consists of surgical intervention and adequate antimicrobial therapy, which can result in satisfactory outcomes.

Cite this article: Bone Joint J 2014;96-B:1561–5.