Aim. There is controversy regarding the use of Antibiotic-loaded cement (ALBC) as compared to non-antibiotic-loaded cement (NALBC) to reduce the overall infection rate without affecting implant survival or adding additional risks on fixation for primary total knee arthroplasty (TKA). Method. To conduct the analysis, we utilized the Catalan Arthroplasty Registry (RACat) for the TKAs implanted between 2005 and 2017. The primary variable recorded was the use of cement with or without antibiotics. Other recorded variables included were age, sex, diabetes mellitus, obesity, Charlson index and type of hospital. We analyzed the effect of ALBC vs. NALBC in reducing the risk of prosthetic infection at 3, 6, 12, and 24 months as well as prosthetic survival due to mechanical causes at 1, 5, and 10 years. Univariate and multivariable analyses of risk factors were conducted. Thereby, an interactive predictive model that determines the risk of prosthetic infection based on each patient's characteristics was created. Results. A total of 28,287 TKAs from the RACat were analyzed. In that total, there were 19,788 NALBC and 8,499 ALBC. The infection rates for TKAs with NALBC vs. those with ALBC at 3, 6, 12, and 24 months were respectively: 1.69% vs. 1.39% (p=0.132); 1.81% vs. 1.56% (p=0.147); 2.14% vs. 1.73% (p=0.030); 2.51% vs. 1.86% (p=0.001). A statistically significant reduction in
Background. Total hip arthroplasty (THA) has become one of the most commonly performed elective procedures. Today, there are nearly 50 000 annual hospitalizations for hip replacement surgery in Canada. This number is projected to increase significantly with the aging population.
Total hip arthroplasty (THA) has become one of the most commonly performed elective procedures. Today, there are nearly 50 000 annual hospitalisations for hip replacement surgery in Canada. This number is projected to increase significantly with the aging population.
The number of arthroplasties being undertaken
is expected to grow year on year, and
Report of a case of migrating
Background. Additive manufacturing (AM) has created many new avenues for material and manufacturing innovation. In orthopaedics, metal additive manufacturing is now widely used for production of joint replacements, spinal fusion devices, and cranial maxillofacial reconstruction. Plastic additive manufacturing on the other hand, has mostly been utilized for pre-surgical planning models and surgical cutting guides. The addition of pharmaceuticals to additively manufactured plastics is novel, particularly when done at the raw material level. The purpose of this study was to prove the concept of antibiotic elution from additively manufactured polymeric articles and demonstrate feasibility of application in orthopaedics. Methods. Using patented processes, three heat-stable antibiotics commonly used in orthopaedics were combined with six biocompatible polymers (2 bioresorbable) into filament and powder base materials for fused deposition modeling (FDM) and selective laser sintering (SLS) AM processes. Raw materials of 1%, 2%, and 5% antibiotic concentrations (by mass) were produced as well as a blend of all three antibiotics each at 1% concentration. Thin disks of 25 mm diameter were manufactured of each polymer with each antibiotic at all concentrations. Disks were applied to the center of circular petri dishes inoculated with a bacterium as per a standard zone of inhibition, or Kirby-Bauer disk diffusion tests. After 72 hours incubation, the zone of inhibited bacterial growth was measured.
Purpose:. Two-stage revision is the gold standard treatment for chronic
Introduction:.
Background. The diagnosis of
BACKGROUND.
Aim. This study aims to evaluate the effectiveness of a pre-formulated irrigation solution. 1. (containing ethanol, acetic acid, sodium acetate, benzalkonium chloride, and sterile water) compared to saline solution in managing acute
Introduction. Serum erythrocyte sedimentation rate (ESR) and C-reactive protein (CRP), and synovial fluid white blood cell (WBC) count and differential are effective in diagnosing
Radiation cross-linking of ultrahigh molecular weight polyethylene (UHMWPE) has reduced the in vivo wear and osteolysis associated with bearing surface wear (1), significantly reducing revisions associated with this complication (2). Currently, one of the major and most morbid complications of joint arthroplasty is peri-prosthetic infection (3). In this presentation, we will present the guiding principles in using the UHMWPE bearing surface as a delivery device for therapeutic agents and specifically antibiotics. We will also demonstrate efficacy in a clinically relevant intra-articular model. Medical grade UHMWPE was molded together with vancomycin at 2, 4, 6, 8, 10 and 14 wt%. Tensile mechanical testing and impact testing were performed to determine the effect of drug content on mechanical properties. Elution of the drug was performed in phosphate buffered saline (PBS) for up to 8 weeks and the detection of the drug in PBS was done by UV-Vis spectroscopy. A combination of vancomycin and rifampin in UHMWPE was developed to address chronic infection and layered construct containing 1 mm-thick drug-containing UHMWPE in the non-load bearing regions was developed for delivery. In a lapine (rabbit) intra-articular model (n=6 each), two plug of the layered UHMWPE construct were placed in the trochlear grove of the rabbit femoral surface and a porous titanium rod with a pre-grown biofilm of bioluminescent Introduction
Materials and Methods
Accurate diagnosis of peri-prosthetic joint infection is critical to allow adequate treatment. Currently, the criteria of the Musculo-Skeletal Infection Society (MSIS) serve as a validated reference tool. More recently, these criteria have been modified for better accuracy. The goal of this study was to compare retrospectively the diagnostic accuracy of these two different tools in cases of known peri-prosthetic hip or knee infection or in aseptic cases and to analyze one additional criterion: presence of an early loosening (prior to 2 years after implantation). All cases of hip or knee prosthesis exchange operated on at our department during the year 2017 have been selected. There were 130 cases in 127 patients: 67 men and 60 women, with a mean age of 69 years − 69 total hip (THA) and 61 total knee (TKA) arthroplasties. 74 cases were septic and 53 cases were aseptic. All criteria included in both classifications were collected: presence of a fistula, results of bacteriological samples, ESR and CRP levels, analysis of the joint fluid, histological analysis. Additionally, the presence of an early loosening was recorded. The diagnosis accuracy of the classical MSIS classification and of the 2018 modification were assessed and compared with a Chi-square test at a 0.05 level of significance.Introduction
Material – Methods
Background. Increasing evidence suggests a link between the bearing surface used in total hip arthroplasty (THA) and the occurrence of infection. It is postulated that polyethylene has immunomodulatory effects and may influence bacterial function and survival, thereby impacting the development of
Aim. A substantial portion of
Background. The identification of novel biomarker which is highly specific and sensitive for periprosthetic joint (PJI) have the potential to improve diagnostic accuracy and ultimately improve patient outcomes. Thus, the aim of this systemic review is to identify and evaluate novel biomarkers for the preoperative diagnostics of PJI. Methods. MEDLINE, EMBASE, PubMed and Cochrane Library databases identified from 1. st. of January 2018 to 30. th. of September. 2022. We used “periprosthetic joint infection” OR “prosthetic joint infection” OR “periprosthetic infection” as the diagnosis of interest and the target index applied AND “marker”. To focus on novel biomarkers already used biomarkers of the established PJI diagnostic criteria of MSIS, ICM and EBJIS were not included in the analysis. These three criteria were considered the reference standard during quality assessment. Results. A total of 19 studies were included. In these, fourteen different novel biomarkers were analyzed. Fifteen studies (79%) had prospective designs and the other four (22%) were retrospective studies. Six studies (33%) included only
Aim. Diagnosing
Background. The diagnosis of
Aims. Despite numerous studies on