Advertisement for orthosearch.org.uk
Results 1 - 6 of 6
Results per page:
Orthopaedic Proceedings
Vol. 101-B, Issue SUPP_5 | Pages 132 - 132
1 Apr 2019
Louth SET Nai K Eisenstein N Cox SC
Full Access

Aseptic loosening is the most common cause of failure in load bearing orthopaedic implants. This is most often attributed to stress shielding, which is caused by a mismatch in mechanical properties between the implant and bone, predominantly stiffness. The implant causes a redistribution of the forces through the bone leading to localised tissue resorption in low stress areas and over time loosening of the implant. To address this, the implant design may be modified to introduce porous structures that reduced overall stiffness.

Conventional methods of creating porous structures include the space holder method and gas foaming, although these allow control of the pore size and volume fraction, the position of the voids is random and potentially non-uniform, creating unpredictable mechanical properties. Using additive manufacture predictable porous lattice structures can be built. Two methods for creating lattice structure are explored here: controlled stochastic lattices, and layers of repeating unit cells. Due to the predictable nature of these design methods the mechanical properties can be tailored to suit the needs of the implants. In addition to mechanical optimisation the porous lattice structures can be optimised for osseointegration properties. The ability of the tissue to grow into the implant are affected by; the size of the pores, how interconnected the pores are, the overall void fraction (porosity), the shape and roughness of the pores, and whether the structure is coated.

Although additive manufacture allows great design freedoms, there are also some manufacturing constraints to consider including resolution which is determined by powder and laser spot size, and strut angle since these cannot be too close to horizontal or they will collapse during the build unless supported. This preliminary work uses Finite Element Analysis to model the compressive properties of lattice structures with different design parameters, with the intention to optimise for mechanical, osseointegration and manufacturability properties.

Cylinders of the lattice structures were generated in Simpleware ScanIP (Synopsys, Exeter, UK) and their compression was modelled in Ansys Workbench 18.2 (Canonsburg, PA, USA) in accordance with ISO 13314. Stress distributions for each lattice structure were produced which showed the stochastic lattice did not undergo banded deformation unlike the repeating unit cell based lattices. Future work will physically test the lattices and feed that data back into the model for further optimisation. Other relevant mechanical testing will be modelled and performed in order to choose the optimal lattice design for future implants.


Orthopaedic Proceedings
Vol. 100-B, Issue SUPP_7 | Pages 23 - 23
1 May 2018
Eisenstein N Williams R Cox S Stapley S Grover L
Full Access

Heterotopic ossification is the formation of lamellar bone in soft tissues and is a common complication of high-energy combat injury. This disabling condition can cause pain, joint ankylosis, and skin ulceration in the residua of amputees. This project is aimed at developing a novel treatment to dissolve hydroxyapatite in heterotopic ossification and prevent the crystallisation of this this mineral at sites of ectopic bone formation. Previously reported results demonstrated that hexametaphosphate could dissolve hydroxyapatite at physiological pH. Further work has been undertaken to investigate the mechanism of this dissolution and establish a means of temporal control of action. In addition, physicochemical analyses of samples of human heterotopic ossification have yielded important insights into the nature of this pathological tissue. Techniques include mapped micro X-ray fluorescence, mapped Raman spectroscopy, scanning electron microscopy, and micro computed tomography. Formulation engineering work has begun in order to develop an appropriate delivery vehicle for this agent. This includes rheological testing and hexametaphosphate elution profiles. Finally, micro CT analysis has shown that hexametaphosphate is able to dissolve human heterotopic ossification tissue. In summary, this work has moved us closer towards our goal of a novel injectable agent for the treatment and prevention of heterotopic ossification.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_8 | Pages 8 - 8
1 Jun 2015
Eisenstein N Bhavsar D Khan S Rees R
Full Access

Over the last 10 years atypical femoral fractures (AFFs) have become recognised as a complication of standard-dose bisphosphonate use. In 2014 the American Society for Bone and Mineral Research published updated diagnostic criteria for AFF. We undertook a 5-year retrospective analysis of the trauma admission database at a major trauma centre to establish the incidence of this problem in our patient population. Initial screening was performed using keyword-matching methodology to produce a shortlist of patients with low-energy femoral fractures. These patients’ case notes, radiographs, and electronic discharge summaries were reviewed to discriminate AFF from typical femoral fractures. Initial filtering identified a total of 112 low energy femoral fractures. Of these, 12 were confirmed as AFFs. 58% (7/12) of the AFF group were on bisphosphonates compared to 15% (15/100) of the typical femoral fracture group. This finding was statistically significant (p = 0.0004). These data show that there is a link between bisphosphonate use and AFF. However, a causal relationship cannot be inferred. The incidence of AFF in our study is broadly in line with the published data.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_8 | Pages 9 - 9
1 Jun 2015
Eisenstein N Grover L Stapley S
Full Access

Heterotopic ossification (HO) is the formation of bone in extraskeletal sites. It is a major problem for combat-related casualties with 64% of such patients showing radiological evidence of the disease. Of these, 19% require surgical excision. Current prophylaxis is problematic due to poor efficacy and unsuitability in a military setting. Our novel anti-HO strategy is to use an inorganic reagent to inhibit the deposition of HA and disperse any pre-formed mineral. Literature review identified several potentially effective agents. These were tested for their ability to disperse solid monoliths of HA. In addition, a standard HA synthetic reaction was performed in the presence of each agent to establish their inhibiting activity. One reagent (a condensed phosphate) dispersed a solid monolith of HA by 38% (mass loss) over 30 days. This reagent was also shown to inhibit HA crystal synthesis yield by 28%. Early work on a hydrogel delivery system has produced favourable results. These preliminary data demonstrate proof of concept that HA may be dispersed and its formation inhibited by a non-toxic polyphosphate. This work will form the justification for development into in vitro osteogenic cell culture models and animal HO models.


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_III | Pages 502 - 502
1 Sep 2009
Eisenstein N Yu J Urban J
Full Access

Intervertebral discs (IVDs) are fibrocartilagenous ovoids located between the vertebral bodies of the spine that provide the sole source of flexibility in that structure. IVDs are clinically very important as degeneration has been shown to be strongly associated with lower back pain, sciatica, and disc herniation: potentially disabling conditions that affect a very large section of the UK population.

The aetiology of disc degeneration is poorly understood although upregulation of matrix metalloproteinase (MMP) activity is thought to be involved. Degradation products of the extra-cellular matrix are known to increase MMP production and activity in other tissues. This project concentrated on examining the effects of degredation products of elastin. Elastin fragments (κ-elastin peptides) have been shown to upregulate mRNA levels and increase expression of pro-MMP-1 in human skin fibroblasts, cells that are thought to be similar to those residing in the annulus fibrosus of intervertebral discs. This study examined their effect on disc cells and on skin fibroblasts.

Total MMP-2 and -7 activity produced by cells extracted from the annulus fibrosus of bovine intervertebral disc cells and cultured for 24 hours with 0–300μg/ml κ-elastin was determined using fluorimetric and zymographic analyses. κ-elastin was prepared from bovine ligamentum nuchae or bovine intervertebral discs.

Culture with κ-elastin prepared from bovine ligamentum nuchae caused skin and disc cell potential pro-MMP-2 activity to increase in a dose-dependent manner; the potential pro-MMP-2 activity of both cell types is more than doubled when cultured with 300μg/ml κ-elastin.

These findings suggest that in the bovine disc, matrix breakdown may cause a feedback loop with degraded elastin stimulating disc cells to increase production of pro-MMP-2, with the possibility of further degrading elastin and other proteins and contributing to IVD breakdown.


Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_II | Pages 220 - 220
1 Jul 2008
Yu J Eisenstein N Cui Y Fairbank JCT Roberts S Urban JPG
Full Access

Introduction: Elastin is a structural protein forming a highly organised network in the annulus and nucleus of the intervertebral disc (IVD). It appears important in maintaining annulus structure as it is densely located in the interlamellar space and forms cross-bridges between lamellae. Here we have investigated elastin fibre organisation in degenerate discs and compared it to that seen in normal human and bovine discs.

Methods: Human lumbar IVD were obtained from consented patients undergoing surgery either for disc degeneration, tumour or trauma. The disc segments were collected from operating theatre and graded. A radial profile of the specimen was dissected and snap-frozen. Sections of 20μm in thickness were cut with a cryostat microtome and mounted on slides. To visualize elastin fibres, sections were digested with hyaluronidase after fixation with 10% of formalin. Elastin fibres were immunostained and fibre organisation mapped.

Results: In degenerate disc, the elastin fibre network appeared sparse and disorganised in comparison to that seen in non-degenerate human or in bovine discs in which elastin fibres are well organised. In addition, in degenerate discs the elastin fibres appear fragmented. Fragmentation of the elastin network within lamellae of the annulus in particular increased with both degeneration grade and with age.

Discussion: The loss of elastic network integrity observed in degenerate discs could contribute to loss of annulus integrity and affect disc mechanical properties adversely. Furthermore, our initial results have suggested fragmented elastin degradation products could upregulate MMP expression by disc cells thus stimulating a degenerative cascade.