Advertisement for orthosearch.org.uk
Results 1 - 10 of 10
Results per page:
Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_15 | Pages 98 - 98
1 Mar 2013
Kiyotomo D Sugamoto K Murase T Tomita T Kunugiza Y Kawashima K Futai K Kuramoto K Yamamoto K
Full Access

Introduction

Regarding TKA, patient specific cutting guides (PSCG), which have the same fitting surface with patient's bones or cartilages and uniquely specify the resection plane by fitting guides with bones, have been developed to assist easy, low cost and accurate surgery. They have already been used clinically in Europe and the USA. However little has been reported on clinical positioning accuracy of PSCG. Generally, the methods of making PSCG can be divided into 3 methods; construct 3D bone models with Magnetic Resonance (MR) images, construct 3D bone models with Computed Tomography (CT) images, and the last is to construct 3D bone models with both MR and CT images. In the present study, PSCG were made based on 3D bone models with CT images, examined the positioning accuracy with fresh-frozen cadavers.

Materials and Methods

Two fresh-frozen cadavers with four knees were scanned by CT. Image processing software for 3D design (Mimics Ver. 14, Marialise Inc.) was used to construct 3D bone model by image thresholding. We designed femoral cutting guides and tibial cutting guides by CAD software (NX 5.0, Siemens PLM Software Co.). CT free navigation system (VectorVision Knee, BrainLab, Inc.) was used to measure positioning error. Average absolute value of positioning error for each PSCG was derived.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_15 | Pages 82 - 82
1 Mar 2013
Iwamoto K Tomita T Yamazaki T Shimizu N Kurita M Futai K Kunugiza Y Yoshikawa H Sugamoto K
Full Access

Background

Various postoperative evaluations using fluoroscopy have reported in vivo knee flexion kinematics under weight bearing conditions. This method has been used to investigate which design features are more important for restoring normal knee function. The objective of this study is to evaluate the kinematics of a Low Contact Stress total knee arthroplasty (LCS TKA) in weight bearing deep knee flexion using 2D/3D registration technique.

Patients and methods

We investigated the in vivo knee kinematics of 6 knees (4 patients) implanted with the LCS meniscal bearing TKA (LCS Mobile-Bearing Knee System, Depuy, Warsaw, IN). Mean period between operation and surveillance was 170.7±14.2 months. Under fluoroscopic surveillance, each patient did a deep knee flexion under weight-bearing condition. Femorotibial motion was analyzed using 2D/3D registration technique, which uses computer-assisted design (CAD) models to reproduce the spatial position of the femoral, tibial components from single-view fluoroscopic images. We evaluated the knee flexion angle, femoral axial rotation, and antero-posterior translation of contact positions.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_15 | Pages 255 - 255
1 Mar 2013
Masahiro K Tomita T Yamazaki T Kunugiza Y Shimizu N Iwamoto K Sugamoto K
Full Access

INTRODUCTION

The outcome after total knee arthroplasty is influenced by the postoperative orientation of the component. For accurate implantation, the surgeon performs a three dimensional preoperative planning and performs the surgery with reference to the anatomical bony landmarks. However, the assessment of orientation after TKA is generally performed on two dimensional radiographs. Despite the accurate implantation, radiographic assessment may not able to accurately evaluate the orientation of the component. CT images obtain a three dimensional information after TKA, but reliable identification of the anatomical bony landmarks remains the problem due to artifacts of metal components. In this study, we evaluate the three dimensional orientation of the component relative to the bone axis of anatomical landmarks using pre- and post-operative CT scanning.

PATIENTS AND METHODS

Two knees after primary TKA were assessed by one observer using preoperative and postoperative CT images. 3D models of pre-operative bone and post-operative bone with the exclusion of component data were constructed. Surface-based registration was performed by independently implementing the iterative closest point algorithm with the least-squares method to match the pre-operative bone model with the post-operative bone model. 3D surface model of the metal component from postoperative CT images was constructed. 3D surface model of the metal component was superimposed on original computer-aided design (CAD) data of the component using surface-based registration. The registration of the metal component was performed three times. Intra-observer reliability of the superimposed CAD models was evaluated. The orientation of the component was measured in euler angle between the axis of the superimposed CAD model and the bone axis of anatomical landmark.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XL | Pages 173 - 173
1 Sep 2012
Shimizu N Tomita T Yamazaki T Kurita M Kunugiza Y Sugamoto K
Full Access

Background

Various postoperative evaluations using fluoroscopy have reported in vivo knee flexion kinematics under weight bearing conditions. This method has been used to investigate which design features are more important for restoring normal knee function. The objective of this study is to evaluate the kinematics of a Posterior-Stabilized TKA in weight bearing deep knee flexion using 2D/3D registration technique.

Patients and methods

We investigated the in vivo knee kinematics of 9 knees (9 patients) implanted with a Posterior Stabilized TKA (Triathlon PS, Stlyker Orthopedics, Mahwah, NJ). Under fluoroscopic surveillance, each patient did a deep knee flexion under weight-bearing condition. Femorotibial motion including tibial polyethylene insert were analyzed using 2D/3D registration technique, which uses computer-assisted design (CAD) models to reproduce the spatial position of the femoral, tibial components from single-view fluoroscopic images. We evaluated the knee flexion angle, femoral axial rotation, antero-posterior translation of contact points, and post-cam engagement were evaluated.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 111 - 111
1 Jun 2012
Kawashima K Tomita T Yamazaki T Futai K Shimizu N Tamaki M Kurita M Kunugiza Y Sugamoto K
Full Access

Background

Mobile-bearing (MB) total knee prostheses have been developed to achieve lower contact stress and higher conformity compared to fixed-bearing total knee prostheses. However, little is known about the in vivo kinematics of MB prostheses especially the motion of the polyethylene insert (PE) during various daily performances. And the in vivo motion of the PE during stairs up and down has not been clarified. The objective of this study is to clarify the in vivo motion of MB total knee arthroplasty including the PE during stairs up and down.

Patients and methods

We investigated the in vivo knee kinematics of 11 knees (10 patients) implanted with PFC-Sigma RP-F (DePuy). Under fluoroscopic surveillance, each patient did stairs up and down motion. And motion between each component was analyzed using two- to three-dimensional registration technique, which used computer-assisted design (CAD) models to reproduce the spatial position of the femoral, tibial components, and PE (implanted with four tantalum beads intra-operatively) from single-view fluoroscopic images. We evaluated the range of motion between the femoral and tibial components during being grounded, axial rotation between the femoral component and PE, the femoral and tibial component, and the PE and tibial component during being grounded.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 122 - 122
1 Jun 2012
Kunugiza Y Tomita T
Full Access

We report long term outcomes of the Rotaglide mobile bearing total knee arthroplasty (RTK).

Method

Between 1995 and 1998, 61 RTK prostheses were implanted at our institution consecutively. Of 34 knees with a median duration to end of follow up of 13.0 years (range 11.4 to 14.2 years), the clinical result using Knee Society Score and radiological analysis using Knee Society Roentgenographic Sytstem was evaluated.

Result

The prosthesis had an estimated survival probability of 94.1% at 13 years. There was one case of deep infection and one case of meniscal component failure.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 123 - 123
1 Jun 2012
Kurita M Tomita T Fujii M Yamazaki T Kunugiza Y Futai K Kawashima K Shimizu N Sugamoto K
Full Access

Background

Mobile-bearing (MB) total knee prostheses have been developed to achieve lower contact stress and higher conformity compared to fixed-bearing total knee prostheses. However, little is known about the in vivo kinematics of MB prostheses especially about the kinematics of polyethylene insert (PE). In vivo motion of PE during squatting still remains unclear. The objective of this study is to investigate the in vivo motion of MB total knee arthroplasty including PE during squatting.

Patients and methods

We investigated the in vivo knee kinematics of 11 knees (10 patients) implanted with Vanguard Rotationg Platform High Flex (Biomet(r)). Under fluoroscopic surveillance, each patient did a wight-bearing deep knee bending motion. Motion between each component was analyzed using two- to three-dimensional registration technique, which uses computer-assisted design (CAD) models to reproduce the spatial position of the femoral, tibial components, and PE (implanted with five tantalum beads intra-operatively) from single-view fluoroscopic images. We evaluated the range of motion between the femoral and tibial components, axial rotation between the femoral component and PE, the femoral and tibial component, and the PE and tibial component, and AP translation of the nearest point between the femoral and tibial component and between the femoral component and PE.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 415 - 415
1 Nov 2011
Kurita M Tomita T Futai K Yamazaki T Kunugiza Y Tamaki M Shimizu M Ikawa M Yoshikawa H Sugamoto K
Full Access

Mobile-bearing (MB) total knee prostheses have been developed to achieve lower contact stress and higher conformity than fixed-bearing total knee prostheses. However, little is known about the in vivo kinematics of MB prostheses especially about the motion of polyethylene insert (PE). And the in vivo motion of PE during squat motion has not been clarified. The objective of this study is to clarify the in vivo motion of MB total knee arthroplasty including PE during squat motion. Patients and methods: We investigated the in vivo knee kinematics of 11 knees (10 patients) implanted with PFC-Sigma RPF (DePuy). Under fluoroscopic surveillance, each patient did a wight-bearing deep knee bending motion. And motion between each component was analyzed using two-to three-dimensional registration technique, which uses computer-assisted design (CAD) models to reproduce the spatial position of the femoral, tibial components, and PE (implanted with four tantalum beads intra-operatively) from single-view fluoroscopic images. We evaluated the range of motion between the femoral and tibial components, axial rotation between the femoral component and PE, the femoral and tibial component, and the PE and tibial component, and AP translation of the nearest point between the femoral and tibial component and between the femoral component and PE.

Results: The mean range of hyper-extension was 2.1° and the mean range of flexion of 121.2°. The femoral component relative to the tibial component demonstrated 10.4° external rotation for 0–120 degrees flexion. The tibial component rotated 10.2° externally relative to the PE and the femoral component minimally rotated relative to the PE within ± 5 degrees. In upright standing position, the femoral component already rotated externally relative to the tibial component in 6.3°, and the PE also rotated on average 6.4° externally on the tibial tray. Typically the femoral component relative to the tibial component exhibited a central pivot pattern external rotation from extension to 80° knee flexion. Subsequently from 80 to 120°, bilateral condyles moved backward. In a similar fashion, the femoral component relative to the PE exhibited a central pivot pattern external rotation from extension to 70° knee flexion and subsequently bicondylar rollback from 70 to 120° knee flexion.

Discussion and Conclusion: In this study, we evaluated the in vivo motion of PE during squat motion. About this total knee prosthesis, the mobile-bearing mechanism which advantages over fixed-bearing prosthesis to reduce contact stress and keep high comformity might work well, and arc of range of motion was maintained. Furthermore, in upright standing position, the femoral component and tibial component already rotated externally relative to the PE in almost equal measure. This indicated that, self-aligning mechanism, another characteristic of the MB prosthesis might also work well.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 447 - 447
1 Nov 2011
Kawashima K Tomita T Yamazaki T Futai K Shimizu N Tamaki M Kurita M Kunugiza Y Watanabe T Shigeyoshi T Yoshikawa H Sugamoto K
Full Access

Recently mobile-bearing total knee arthroplasty (TKA) has become more popular. However, the advantages of mobile bearing (MB) PS TKA still remain unclear especially from a kinematic point of view. The objective of this study was to investigate the difference and advantage in kinematics of mobile baring PS TKA compared with fixed bearing (FB) PS TKA.

Femorotibial nearest positions for 19 subjects (20 knees), 10 knees implanted with NexGen Legacy flex (Zimmer, Warsaw, IN)with mobile bearing PS TKA, and 10 knees implanted with NexGen Legacy flex (Zimmer, Warsaw, IN)with fixed bearing PS TKA were analyzed using the sagittal plane fluoroscopic images. All the knees were implanted by a single surgeon. All the subjects performed weight bearing deep knee bending motion. We evaluated range of motion, axial rotation of the femoral component, AP translation of medial and lateral sides.

The average range of motion between femoral component and tibial component was 119°±18° in MB and 122°±10 ° in FB. The axial rotation of the femoral component was 11.8°±6.2° in MB and 11.8°±4.9° in FB. There was no significant difference both in range of motion and axial rotation between MB and FB. The AP translation of MB and FB showed same patterns. They were rollback in early flexion, the lateral pivot pattern (the medial condyle moved forward significantly compared with the lesser amount of AP translation for the lateral condyle) at mid flexion, and bicondylar rollback at deep flexion. The rollback in early flexion was 3.4mm in MB and 1.8mm in FB at medial side, 4.2mm in MB and 4.8mm in FB at lateral side. There was no significant difference. The lateral pivot pattern, which moved anteriorly, was 7.8mm in MB and 7.0mm in FB at medial side, 3.0mm in MB and 2.4mm in FB at lateral side. There was no significant difference. The bicondylar rollback at deep flexion was 6.4mm in MB and 7.7mm in FB at medial side, 6.9mm in MB and 4.8mm in FB at lateral side. In four subjects, more than 12°axial rotation was observed in knees implanted with FB TKA which allows only 12°axial rotation.

The results in this study demonstrate that there was no significant difference in kinematics of weight bearing deep knee bending motion between MB and FB. The advantage of MB is allowance of axial rotation which restricted until 12° in FB NexGen Legacy flex PS TKA.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_IV | Pages 542 - 542
1 Oct 2010
Tamaki M Futai K Kawashima K Kunugiza Y Sugamoto K Tomita T Tsuji S Yamazki T Yoshikawa H
Full Access

Introduction: Recently several retrieval reports of PS TKA have demonstrated that the wear and deformation can occur on the anterior tibial post and the hyperextension of femorotibial components was a pivotal factor in the mechanism of anterior tibial post impingement. The objective of this study was to investigate the in vivo mechanism of anterior tibial post impingement during gait in PS TKAs.

Methods: Twenty knees with PS TKAs implanted by single surgeon were assessed in this study. The Review Board Committee of the author’s institution approved this study and informed consent was obtained from all patients. In this study ten knees implanted with Scorpio NRG PS (Stryker Orthopedics, Mahwah, NJ) and ten knees implanted with NexGen Legacy-flex fixed (Zimmer, Warsaw, IN) were examined. Each patient was asked to perform treadmill gait under fluoroscopic surveillance in the sagittal plane. Treadmill gait speed was 0.5–1.0 m/s at Patients selected comfortable speed. Patients were explicitly encouraged to fully extend their knees at heel-strike and to avoid a shuffling gait pattern. Patients used light-touch hand-support to maintain the foot position on the treadmill. In vivo 3D poses of the knee prostheses were computed using a two- to three-dimensional (2D/3D) registration technique, which uses CAD models to reproduce spatial postures of the femoral and tibial components from calibrated single-view fluoroscopic images. We evaluated range of motion and the anterior-posterior (AP) translations between femoral and tibial inserts. The anterior tibial post impingement was determined when the proximity between tibial post and femoral cam is within the 0.5mm threshold.

Results: The maximum flexion during gait was 41.9° (25°–56°) in NRG and 42.3° (23°–59°) in Legacy-flex. The minimum flexion during gait was 1.5° (−9.2° − 8.4°) in NRG and 1.8° (−13.0° − 17.0°) in Legacy-flex. The AP translations of the medial and lateral contact points in stance phase were significantly larger in Legacy-flex compared with NRG (medial ; p=0.02,lateral ; p=0.007, Mann-Whitney’s U test). Anterior tibial post impingement was recognized in four knees implanted with Legacy-flex, and in two of three knees, the knee was not hyper extended. On the other hand, no impingement was recognized in knee implanted with NRG.

Discussion: In this study, the anterior tibial post impingement occurred not only in hyper extended knee but also in slightly flexed knee in Legacy-flex. One of the reasons why the anterior tibial post impingement was recognized in Legacy-flex was the large amount of the AP translation in stance phase. Posterior translation in stance phase may be one pivotal factor in the mechanism of the anterior tibial post impingement.