Advertisement for orthosearch.org.uk
Results 1 - 3 of 3
Results per page:
Applied filters
General Orthopaedics

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_15 | Pages 141 - 141
1 Mar 2013
Chang YJ Kim Y Lim YW Song J Kwon SY
Full Access

Introduction

To minimize leg length discrepancies (LLD), preoperative measures are taken using the PACS; the head center to the proximal end of the lesser trochanter distance (HLD) of the opposite side of the operating limb are calculated, while during operation, the modular neck selection is adapted to equal the opposing limb's length.

The purpose of this study was to see whether the HLD method would show far less occurrences of LLD, in comparison to the conventional method(preoperative templating and shuck test).

Method

349 (412 hips) patients who had undergone THRA were divided into two groups based upon which methods they had used to equalize limb length during operation: (1) HLD method, and (2) conventional methods. Six months after surgery, using the PACS system, LLD's of the two groups were compared.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_15 | Pages 241 - 241
1 Mar 2013
Lim YW Kwon SY Kim JY Kim Y
Full Access

Purpose

Ion implantation with a high kinetic energy has advantages in controlling the size and distribution of coating materials, helping to overcome the limitations of conventional methods. This method resulted in uniformly and homogeneously distributed in a CoCr alloy even without a further annealing process. The study was to investigate the wear rate of UHMWPE on CoCr alloy for metal head by plasma immersion ion implantation (PIII) treatments.

MATERIALS AND METHODS

Commercially CoCr alloy (ISO 5832-12, ASTM F1537, alloy 1) were used as the substrate. PIII surface treatments were performed in a high-vacuum chamber with a radio frequency plasma source. We divided with two groups: PIII CoCr alloy, CoCr ally as control. Wear amount of UHMWPE (ISO 5834-2, ASTM F648, Type 1) on CoCr alloy specimens (three samples per group) was evaluated after 500,000 and 1,000,000 cycles using pin-on disk wear tester. After test, surface morthology was examined by SEM, and surface roughness was calculated in both groups.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_15 | Pages 242 - 242
1 Mar 2013
Lim YW Kim Y Kwon SY Chang YJ Kim KS
Full Access

Introduction

Inspired by mussel-adhesion phenomena in nature can integrate inorganic hydroxyapatite crystals within versatile materials. This is a simple, aqueous, two-step functionalization approach, called polydopamine-assisted hydroxyapatite formation (pHAF), that consists of i) the chemical activation of material surfaces via polydopamine coating and ii) the growth of hydroxyapatite in a simulated body fluid (SBF). We presumed polydopamine coating on the surface of titanium alloy would improve the ability of cementless stems to osseointegrate. We therefore compared the in vitro ability of cells to adhere to polydopamine coated Ti alloy and machined Ti alloy.

Method

We performed energy-dispersive x-ray spectroscopy and scanned electron microscopy investigations to assess the structure and morphology of the surfaces. Biologic and morphologic responses to osteoblast cell lines (MC3T-E1) were then examined by measuring cell proliferation, cell differentiation (alkaline phosphatase activity), and avb3 integrin.