Advertisement for orthosearch.org.uk
Results 1 - 11 of 11
Results per page:
Orthopaedic Proceedings
Vol. 101-B, Issue SUPP_5 | Pages 74 - 74
1 Apr 2019
Micera G Moroni A Orsini R Sinapi F Fabbri D Acri F Miscione MT Mosca S
Full Access

Objectives

Total hip arthroplasty (THA) is one of the most successful surgical procedures; several bearing technologies have been used, however none of these is optimal. Metal on polycarbonate-urethane (PCU) is a new bearing technology with several potential advantages: PCU is a hydrophilic soft pliable implant quite similar in elasticity to human cartilage, offers biostability, high resistance to hydrolysis, oxidation, and calcification, no biodegradation, low wear rate and high corrosion resistance and can be coupled with large metal heads (Tribofit Hip System, THS).

The aim of this prospective study was to report the survivorship and the clinical and radiographic outcomes and the metal ions dosage of a group of patients operated with metal on PCU arthroplasty featuring large metal diameter heads, at 5 years from surgery.

Study Design & Methods

68 consecutive patients treated with the THS were included. The patients have been contacted by phone call and invited to return to our centre for clinical (Oxford Hip Score, OHS, and Harris Hip Score, HHS), radiographic exam and metal ion levels evaluation. All the patients were operated with uncemented stems.


Orthopaedic Proceedings
Vol. 101-B, Issue SUPP_5 | Pages 61 - 61
1 Apr 2019
Micera G Moroni A Orsini R Sinapi F Mosca S Acri F Fabbri D Miscione MT
Full Access

Background

The aim of this study is to analysis the ability of these patients, treated with MOMHR, to resume sport activities by gait analysis and clinical evaluations. Metal on metal hip resurfacing (MOMHR) is indicated to treat symptomatic hip osteoarthritis in young active patients. These patients require a high level of function and desire to resume sport activities after surgery.

Study Design & Methods

30 consecutive male patients playing high impact sports with unilateral hip osteoarthritis and normal contralateral hip were included in the study, they were treated with MOMHR by the same surgeon. No patients were lost to follow. The mean age at operation was 39.1 years (range 31 to 46). Primary diagnosis was osteoarthritis. OHS, HHS, UCLA activity score were completed at pre-operative time, six months and one year after surgery. Functionally, gait analysis was performed in all patients 6 months and one year after surgery. A stereophotogrammetric system (Smart-DX, BTS, Milano, Italy, 10 cameras, 250Hz) and two platforms (9286BA Kistler Instrumente AG, Switzerland) were used. Cluster of 4 markers were attached on the skin of each bone segment, a number of anatomical landmarks were calibrated and segment anatomical frames defined, markers were positioned by the same operator. Walking, running and squat jump were analyzed and strength and range of movement of the hips and knees were calculated.


Orthopaedic Proceedings
Vol. 101-B, Issue SUPP_4 | Pages 63 - 63
1 Apr 2019
Micera G Moroni A Orsini R Mosca S Fabbri D Sinapi F Miscione MT Acri F
Full Access

Introduction

The aim of this study was to analyze the results of our series of female patients treated with <48 mm MOMHR devices at a minimum follow-up of 5 years, to understand which is the most important aspects affecting the results and to define if the metal ions dosage has to be indicated as a routinely follow-up.

Methods

This is a retrospective clinical study; the cohort included 198 consecutive MOMHR implanted in 181 female patients (17 bilateral procedures). All operations were performed between 2002 and 2011. All operations were performed by the senior surgeon. Indications to MOMHR included primary or secondary osteoarthritis (OA), rheumatoid arthritis and avascular necrosis. Contraindications included poor proximal femoral bone stock (T-score<−2.5sd in BMD of the femoral neck) or severely distorted hip anatomy. All patients were advised to underwent clinical and radiological review with the operating surgeon at 5 weeks, 3, 6 and 12 months postoperatively and then every subsequent 2 years.182 patients answered to our phone calls; 4 patients died (one of them was operated bilaterally) for causes not related to the study, and in 11 cases the phone number was expired. The minimum follow-up was 5.0 years (mean 7.5, maximum 13.2, sd 0.11).


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVII | Pages 255 - 255
1 Sep 2012
Moroni A Hoque M Micera G Sinapi F Calbucci L Maccagnan E Giannini S
Full Access

Introduction

Metal-on-metal hip resurfacing (MOMHR) is a good surgical indication for young active patients. However, it cannot be used in patients with an excessively short femoral head/neck. To address these cases, a new surgical technique has been developed comprising femoral head augmentation using impacted morcellized bone grafts.

Methods

32 osteoarthritis patients who had severe congenital insufficiency of the femoral head/neck were treated with MOMHR combined with femoral head augmentation. Mean patient age was 49 ± 9 years (18–66). The required amount of augmentation was calculated on preoperative X-rays and confirmed during surgery. Using specially designed instrumentation, bone chips produced while reaming the socket and trimming the head were impacted onto the head to achieve the desired reconstruction and lengthening. Finally, the femoral component was cemented.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XL | Pages 126 - 126
1 Sep 2012
Moroni A Hoque M Micera G Orsini R Nocco E
Full Access

Introduction

Metal-on-polycarbonate urethane (MPU) is a cutting-edge new bearing technology for hip arthroplasty. The acetabular component consists of a 2.7mm-thick polycarbonate-urethane liner inserted into a specially manufactured uncemented titanium shell coated with hydroxyapatite [(HA) Fig. 1]. The liner is pliable and biomechanically mimics human cartilage. In vitro studies have shown minimal wear, fluid film lubrication, physiological load transmission and shock absorption capacity equal to the normal hip. This system includes prosthetic heads of a diameter 12mm less than the socket diameter. The aim of this study was to clinically assess patients treated with this novel technology in a retrospective single centre study.

Methods

Twenty-seven patients with osteoarthritis treated with MPU bearing arthroplasty were included. Mean patient age was 67.9±10.35 years (44–84). Sixteen patients were female and 11 were male. Twenty-four of these had an uncemented HA-coated stem while 3 had a hip resurfacing metal femoral component. All patients were operated on by a single surgeon using a postero-lateral approach.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 151 - 151
1 Jun 2012
Moroni A Hoque M Micera G Sinapi F
Full Access

A retrospective single-center review has been performed to gather clinical data on the use of polycarbonate-urethane (PCU) as an articulating bearing material inside a cobalt-chrome (Co-Cr) press-fit acetabular shell.

As of January 2010, the Co-Cr shell and PCU liner have been implanted into 25 total hip patients which were retrospectively followed. The indications for use were in 24 cases of osteoarthritis, and 1 revision case. No patient was lost to follow-up. The average follow-up time was 17.6 months (range 8-27). The average age of these patients was 67.9 (range 44-84), the sex distribution was 14 female and 11 male patients, of whom 15 were right and 10 left side. 24 patients received a total hip replacement with the metal acetabular system and a cementless femoral stem and 1 patient received the metal acetabular shell coupled to a cemented resurfacing head.

None of the cases has had a dislocation, revision, dislodgement, or infection. At follow-up, the mean Harris hip score was 98 points (80-99). X-rays showed good bone-implant contact without any osteolysis or bone rarefaction.

A detailed review of the clinical data of these patients shows that a PCU liner inserted into a Co-Cr acetabular shell is as safe and effective as other commonly used acetabular shells in other total hip systems currently available. No new or unintended adverse or device-related events were discovered with the clinical use of PCU in a Co-Cr acetabular shell.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 439 - 439
1 Nov 2011
Moroni A Wippermann B Siebert W Mai S Micera G Orsini R Hoque M Giannini S
Full Access

Although the number of displaced femoral neck fractures treated with hip arthroplasty is steadily growing, the outcomes are not as good as for other surgical indications. As a result, there is no consensus on the ideal type of arthroplasty for these patients. Unipolar and bipolar arthroplasty have a low dislocation rate but implant longevity and functional results are suboptimal. Total hip arthroplasty (THA) provides better functional outcomes and implant longevity but it is associated with a high incidence of postoperative dislocation. This constitutes a significant limiting factor for a more widespread use of this procedure.

The TriboFit® Buffer (Active Implants Corporation, Memphis, Tennessee, USA) is a 2.7 mm-thick cup made of polycarbonate-urethane which mimics the mechanical characteristics of human cartilage. It is a pliable, hydrophilic, biocompatible, endotoxin-resistant material and acts as a stress-absorber, transmitting loads to the subchondral bone in a physiological manner. The TriboFit® Buffer shows excellent tribology, including ideal fluid film lubrication, low friction, high load carrying capabilities and long endurance.

The TriboFit® Buffer is fixed using flexible mechanical fixation. With a special instrument, a circumferential groove is cut into the patients’ socket. The TriboFit® Buffer is seated by applying gentle pressure, with its ledge snapping tightly into the groove. The surgical technique is bone sparing as no acetabular bone reaming is required whatsoever. The TriboFit® Buffer can be coupled with large diameter cobalt-chromium femoral prosthetic heads of the same dimensions as the patients’ femoral head. By restoring the correct hip anatomy and preserving the original size of the femoral head, hip range of motion (ROM) and stability are optimised.

Within a multi-centre study, 224 patients (63 male and 161 female) with femoral neck fractures were treated with the TriboFit® Buffer, a large diameter head and either cemented (192) or uncemented femoral stems (32). The mean patient age was 83 years (range 65 to 96).

All surgeries were performed using a standard antero-lateral approach.

Rehabilitation was fast and weight-bearing was as tolerated by the patients. There were no major complications, and in particular, no postoperative dislocations were reported.

At a mean follow-up of one year, X-rays showed good implant stability. The mean Harris hip score (HHS) after one month was 58 points and increased to 80 points at one year (p = < 0.05). The ROM was the same as in the intact hip. Only one patient was revised because of nonimplant-related pain. This patient complained of pain in the surgically treated limb which was in actual fact related to spinal stenosis. Analysis of the retrieved implant revealed a loss of thickness in the superior area as well as minimal weight (approximately 2.4%). The backside revealed evidence of macroscopic wear in the area of directional loading from the femoral head to the acetabulum. The bearing surface showed minimal wear (less than 15 mm3), indicating that the primary wear location was on the backside. Retrieved synovial fluid and tissue analysis confirmed that there was no reactivity and no sign of synovitis.

With femoral neck fracture patients, TriboFit® Buffer arthroplasty is theoretically superior to both hemiarthroplasty and THA as it should involve the same low risk of dislocation and acetabular bone preservation associated with hemiarthroplasty, together with the same good functional results and consistent implant longevity of THA. Other advantages of this technique include reduced bleeding and short surgical times.

The results of this study show that the new TriboFit® Buffer arthroplasty technology has the potential to revolutionize the surgical treatment of displaced femoral neck fracture.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 473 - 474
1 Nov 2011
Moroni A Micera G Orsini R Hoque M Giannini S
Full Access

Although metal-on-metal hip resurfacing (MOMHR) is becoming a well accepted indication for young active patients with hip deformities, it does not come without its disadvantages. Longterm bone atrophy, serum metal ion elevation, metal ion hypersensitivity and the formation of pseudotumours have all been reported in the literature. It is thus clear that there is a need for novel bearing technology.

A potentially revolutionary hip resurfacing system comes in the form of the TriboFit® Hip System, which comprises a 2.7 mm-thick acetabular buffer made of polycarbonate-urethane, a hydrophilic, biocompatible, endotoxin-resistant material which mimics the fluid film layer naturally present in hip joints. This is a pliable implant whose modulus of elasticity is the same as that of normal human cartilage, thus providing optimum shock absorption. In addition, it induces lubrication, which is of the utmost importance as friction is almost eliminated, resulting in a subsequent decrease in the production of wear particles. Indeed, in vitro studies have shown that metal wear is 7-fold less than with a comparable metal-on-metal implant.

The TriboFit® Buffer is implanted using flexible mechanical fixation. With a special instrument, a circumferential groove is cut into the patients’ socket. The TriboFit® Buffer is seated by applying gentle pressure, with its ledge snapping tightly into the groove. The surgical technique is bone sparing as no acetabular bone reaming is required whatsoever. The TriboFit® Buffer can be coupled with a select number of metal hip resurfacing femoral components.

In our centre, we have used this novel bearing technology to treat patients with both osteoarthritis (two patients) and avascular necrosis (four patients). The mean patient age was 50 years (range 30 to 63). In five patients who had a well preserved socket anatomy, the TriboFit® Buffer was implanted without reaming the acetabular bone. In one patient with significant osteoarthritic changes of the socket, the TriboFit® Buffer was inserted into a specially manufactured uncemented metal shell, using the TriboFit® Buffer as a liner. The socket was reamed according to the standard reaming technique. In two patients a Birmingham hip resurfacing (BHR) femoral component was used and in the other four an ADEPT component was used.

Rehabilitation was fast and uncomplicated. The mean follow-up of these patients was one year. The mean preoperative Harris hip score (HHS) was 62. The mean HHS at one year was 99 (p = < 0.05). X-rays showed good quality bone at the bone-implant interface. No osteolysis, loosening, or bone rarefaction was observed. At follow-up, two patients resumed sporting activities. One patient resumed skiing while the other resumed biking.

Our pilot study shows that TriboFit® Buffer hip resurfacing arthroplasty is a valid alternative to MOMHR. Compared to the latter, the major advantage includes significantly lower metal wear generation, without any differences in the functional results. This new technology has the potential to expand the use of hip resurfacing to patients with renal malfunction, metal ion allergy/hypersensitivity and to fertile females.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_II | Pages 172 - 172
1 May 2011
Moroni A Hoque M Micera G Orsini R Samy A Giannini S
Full Access

Metal-on-metal hip resurfacing (MOMHR) is a good surgical indication for young active patients. However, it cannot be used in patients with severe CDH and in particular a too short head/neck. To address these cases, a new surgical technique consisting of augmentation of the femoral head with impacted morcellized bone grafts has been developed.

32 osteoarthritis patients following severe congenital insufficiency of the femoral head/neck were treated with MOMHR combined with femoral head augmentation. The required amount of augmentation was calculated on preoperative X-rays and confirmed during surgery. Using special instrumentation, bone chips produced while reaming the socket and trimming the head were impacted on the head to achieve the desired reconstruction and lengthening. Finally, the femoral component was cemented.

Mean patient age was 49+ 9 years (18–66). Median head lengthening was 12+ 2 mm. Mean follow up is 4.2 years (3–6). Mean preoperative Harris hip score (HHS) was 58 and at follow-up 95 (p < 0.05). Mean leg lengthening was 2.2 cm (p = 0.001). In all Gruen zones, bone mineral density (BMD) decreased during the first 3 months. At 2 years in zone 1 mean BMD increased to 96.8% (p = 0.009) and in zone 7 to 102.1% (p = 0.05). A correlation was found between valgus positioning of the femoral components and increased BMD (p = 0.005).

This impaction bone grafting technique expands the use of MOMHR to patients with severe congenital hip dysplasia leading to a more anatomical reconstruction with a full recovery of function and BMD.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_II | Pages 126 - 126
1 May 2011
Moroni A Hoque M Micera G Orsini R Giannini S
Full Access

Metal-polycarbonate urethane (MPU) bearing is a cutting-edge new bearing technology for hip reconstruction. It consists of a 3mm-thick pliable acetabular cup which biomechanically mimics human cartilage and can be coupled with large diameter metal heads. In pristine sockets, no acetabular bone reaming is required to insert the cup. No cement is needed and the cup is simply snapped by hand into a groove made with a special tool. In deformed sockets, the standard reaming technique must be used. The cup acts as a liner inserted into an uncemented metal shell.

MPU bearing has been analysed in comparative in vitro studies. Clinical and radiographic results have been recorded at a minimum follow-up of 2 years in 202 femoral neck fracture patients.

Polycarbonate-urethane elasticity is 20MPa (70 times less than UMHWPE, 10,500 times less than CoCr, p < 0.001). The number of particles generated per step is 1000 with MPU, 1,000,000 with ceramic-ceramic and metal-metal (MOM) (p< 0.001). Fluid film thickness is 0.25microns with MPU, 0.02 with MOM (p< 0.001). At a minimum follow-up of 2 years, X-rays showed good implant stability. In sockets where the buffer alone was implanted an improvement of the supraacetabular bone density was observed over time. Mean Harris hip score after 1 month was 58 points, increasing to 80 points at 2 years (p < 0.05). One patient was revised, due to non-implant-related pain.

The in vitro and clinical data support the use of this novel bearing technology which has the potential to revolutionize hip arthroplasty.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 76 - 76
1 Mar 2010
Hoang-Kim A Lio V Orsini R Micera G Moroni A
Full Access

PURPOSE: The treatment of pertrochanteric fractures is constantly evolving and surgical issues remain controversial. Although the use of a sliding hip screw is considered to be the treatment of choice by many surgeons, we believe that intramedullary nailing could be a viable treatment option for unstable pertrochanteric fractures. Given this background, we compared the clinical outcome of unstable pertrochanteric fractures treated with intramedullary hip screw (IMHS) and standard screws with unstable pertrochanteric fractures treated with intramedullary hip screw using hydroxyapatite (HA)-coated screws.

METHODS: Forty consecutive female osteoporotic patients with pertrochanteric fractures were selected. The inclusion criteria were: female; age ≥65 years; pertrochanteric fracture resulting from minor trauma. Patients were randomized by a computer-generated list to receive either IMHS fixed with stainless steel lag screws (Group A) or IMHS fixed with HA-coated pins (Group B).

RESULTS: Average patient age was 82 ± 8 years in Group A and 78 ± 6 years in Group B. Average BMD was 512 ± 177 in Group A, and 471 ± 231 in Group B. Average intraoperative time was 64 ± 6 minutes in Group A and 34 ± 5 minutes in Group B (p < 0.005). In Group A, all patients had post-operative blood transfusions averaged 2.0 ± 0.1. In Group B, there were no blood transfusions (p < 0.0001). In Group A, the reduction over time in the femoral neck-shaft angle was 6 ± 8, while in Group B, the reduction was 2 ± 1 (p < 0.002).

Conclusion: This study showed that intramedullary hip screw with HA-coated lag screw is an effective treatment for unstable fractures in this patient population. The operative time is brief, the fixation is adequate, and the reduction is maintained over time.