Advertisement for orthosearch.org.uk
Results 1 - 11 of 11
Results per page:
Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 285 - 285
1 Dec 2013
Deshmukh A Rodriguez J Cornell C Rasquinha V Ranawat A Ranawat CS
Full Access

Introduction:

Severe bone loss creates a challenge for fixation in femoral revision. The goal of the study was to assess reproducibility of fixation and clinical outcomes of femoral revision with bone loss using a modular, fluted, tapered distally fixing stem.

Methods:

92 consecutive patients (96 hips) underwent hip revision surgery using the same design of a modular, fluted, tapered titanium stem between 1998 and 2005. Fourteen patients with 16 hips died before a 2-year follow-up. Eighty hips were followed for an average of 11.3 years (range of 8 to 13.5 years). Bone loss was classified as per Paprosky's classification, osseointegration assessed according to a modified system of Engh et al, and Harris Hip Score was used to document pain and function. Serial radiographs were reviewed by an independent observer to assess subsidence, osseointegration and bony reconstitution.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 42 - 42
1 Jun 2012
Deshmane P Baez N Rasquinha V Ranawat A Rodriguez J
Full Access

Introduction

Mechanical integrity of patella can be weakened by the technique of removing the articulating surface. The senior author developed the technique of maintaining subchondral bone of the lateral patellar facet in early 1980s. Though laboratory studies have demonstrated deleterious effect of excessive resection of patella on the strains in the remaining bone under load; clinical studies have not shown the importance of strong subchondral bone of lateral facet to have an effect on patellar fracture prevalence. We present the results of our patellar resection technique preserving the subchondral bone of lateral facet.

Methods

393 TKRs were performed between 1989 and 1996 using cruciate substituting modular knee with recessed femoral trochlear groove and congruent patello-femoral articulation. 45 patients with 48 knees died and 37 patients with 41 knees were lost to follow-up. Three hundred and four knees were followed for an average 10 years (range 5 -16 years). Patellar surface was resected with an oscillating saw without the use of cutting guide. The medial facet and most of the articular cartilage of the lateral facet was resected, while preserving the subchondral bone of lateral facet. An all-polyethylene implant with single peg was used in most cases.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 245 - 245
1 Jun 2012
Deshmukh A Rodriguez J Klauser W Rasquinha V Lubinus P Ranawat C Thakur R
Full Access

Introduction

Studies have documented encouraging results with the use of fluted, tapered, modular, titanium stems in revision hip arthroplasty with bone loss. However, radiographic signs of osseointegration and patterns of reconstitution have not been previously categorized.

Materials and Methods

64 consecutive hips with index femoral revision using a particular stem of this design formed the study cohort. Serial radiographs were retrospectively reviewed by an independent observer. Bone loss was determined by Paprosky's classification. Osseointegration was assessed by a slight modification of the criteria of Engh et al. Femoral restoration was classified according to Kolstad et al. Pain and function was documented using Harris Hip Score (HHS).


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_II | Pages 215 - 215
1 May 2011
Thakur R Deshmukh A Goyal A Ranawat A Rasquinha V Rodriguez J
Full Access

Introduction: Failure of internal fixation of intertrochanteric fractures may be associated with delayed union or malunion resulting in persistent pain and diminished function. The purpose of this study is to evaluate results of the use of a tapered, fluted, modular, distally fixing cementless stem in the management of failed treatment of intertrochanteric hip fractures in elderly patients.

Methods: 837 patients had internal fixation of intertrochanteric fractures over a seven year period (2000–2007) at our institution. Of these, 15 patients with mean age of 80.6 years (69.8–92.3), underwent hip arthroplasty for failure of internal fixation. Clinical and radiographic records of these patients were evaluated.

Results: At an average follow up of 2.86 (2–4.5) years, all patients showed marked functional improvement with change in mean Harris hip score from 35.90 to 83.01 (P < 0.01). Fourteen stems had stable bony ingrowth and one stem was loose and subsided by 5 mm. Three patients used a walker for ambulation, ten patients used a cane and two could ambulate without aids.

Conclusion: Use of a tapered fluted modular cementless stem allows stable distal fixation in a reproducible fashion with good functional outcome in this challenging cohort of patients. All patients were ambulatory, however majority used walking aids.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_IV | Pages 417 - 418
1 Apr 2004
Rasquinha V Bevilacqua B Rodriguez J Ranawat C
Full Access

Introduction: Although the problems of patello-femoral kinematics in contemporary total knee arthroplasty are multifactorial, meticulous surgical technique is pivotal in providing optimal and durable function. The goal of this study was to evaluate the incidence of lateral release comparing fixed and mobile bearing posterior stabilized modular press-fit condylar TKA’s with patellar resurfacing.

Materials and methods: Cohort 1 comprised 100 consecutive cemented Press-Fit Condylar Sigma, (Johnson & Johnson, Raynham, Massachusetts) modular total knee prostheses with a posterior cruciate substituting design and dome shaped single peg patellar component implanted prospectively by a single surgeon. Cohort 2 comprised 100 consecutive cemented Press-Fit Rotating Platform Sigma (Johnson & Johnson, Raynham, Massachusetts) modular total knee prostheses with the same posterior cruciate substituting design and patellar component.

The surgical technique comprised cutting the tibial surface perpendicular to the long axis, ligament balancing in extension followed by femoral component rotation referenced off the proximal tibial cut to produce a rectangular flexion gap. The patella was cut to the level of the lateral facet and tibial component rotation was referenced off the center of the ankle. Lateral release was performed if congruent patello-femoral contact was not attained in knee flexion. Clinical and radiographic review was performed as per Knee Society criteria. Additional radiographic evaluation included patellar displacement, tilt, residual bone thickness and coverage ratio. A patient-administered questionnaire was used to evaluate anterior knee pain and patello-femoral function 1 year after surgery.

Results: The incidence of lateral release in the fixed-bearing cohort was 10% 1 compared to 0% in the mobile bearing cohort (p< 0.05). There were no significant differences in terms of clinical or radiographic parameters at short term.

Discussion: This study demonstrates the benefit of self-correction of tibiofemoral rotational mismatch with mobile bearing TKA’s and improvement in patello-femoral tracking. Longer follow-up is necessary to confirm the effect on patello-femoral wear, fixation and durability.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_IV | Pages 417 - 417
1 Apr 2004
Rasquinha V CervierI C Bevilacqua B Rodriguez J Ranawat C
Full Access

Introduction: This prospective review provides an update on a cohort of 150 consecutive primary TKA’s with intermediate follow-up (mean 10 years) and provides insight into the benefits of the device and casts light on the effects of polyethylene wear in posterior stabilized modular designs.

Materials: Between February 1988 and February 1990, 150 consecutive cemented Press-Fit Condylar (PFC, Johnson & Johnson, Raynham, Massachusetts) modular total knee prostheses (118 patients) with a posterior cruciate substituting design were implanted prospectively by a single surgeon. Two independent observers employing a patient administered questionnaire and clinical and functional Knee Society scores assessed the clinical outcome. Radiographic review was performed per the Knee Society criteria. The cumulative survivorship analysis was performed in terms of best case and worst case.

Results: 20 patients (30 TKR) died and 14 patients (15 TKR −10%) were lost to follow-up. The mean duration of follow-up in this cohort of survivors was 10 years (range 8.5 – 12 years). The mean clinical and functional scores were 88 and 73 points respectively. Of the 105 TKR followed up, good to excellent results have been attained in 89.5%. 45 patients reported participation in recreational sports. The overall projected clinical and radiographic survival was 93.6% at 12 years (CI +5.9%). Revision TKA was performed in 5 knees – 2 infection, 1 instability and 2 polyethylene wear, synovitis and osteolysis. There were no cases of aseptic loosening in the absence of polyethylene wear.

Discussion: Although the 12-year survivorship results of the cemented, posterior cruciate substituting press-fit condylar modular total knee prosthesis have been successful in terms of quality of fixation, the phenomenon of ‘back-side’ polyethylene wear at the modular tibial base-plate and resultant osteolysis offset the benefits of the modularity with longer follow-up. Attention needs to be focused on the improvement of the locking mechanism or alternatives with improved newer wear-resistant polyethylene, one-piece tibial components or newer implant designs with mobile bearings such as rotating platforms with posterior substituting design.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_IV | Pages 418 - 418
1 Apr 2004
Mathews V Rasquinha V Matusz D Rodriguez J Ranawat C
Full Access

Introduction: The objectives of this study were to evaluate acetabular bone deficiency in revision THA with a simple classification on the anteroposterior pelvis radiograph and correlate the results of cementless hemispherical porous coated cup and cancellous bone graft reconstruction.

Methods: 70 acetabular revisions reconstructed employing large ‘jumbo’ porous coated cups with cancellous allo-grafting were evaluated at a mean follow-up of 5 years (range 2 – 10 years). During this time period 7 additional acetabular reconstructions required impaction grafting, cage reinforcement and cemented cups. Pre- and postoperative measurements of acetabular bone loss and the position of the revision component were performed with respect to a previously described triangle defining the placement and size of an idealcup. Impaction bone allo-grafting techniques were employed to fill defects. A minimum of 40% implant contact to host bone, especially in the weight-bearing dome region was attained in all cases and a minimum of 2 screws supplemented fixation to the ilium. Clinical evaluation comprised the HSS score and a patient assessment questionnaire (PAQ). Radiographically, cups were examined for filling of defects, ingrowth, graft consolidation, and stability.

Results: The mean HSS score improved from 18 to 33 out of a maximum of 40. The mean superior bone defect was 18 mm (range 10 – 25mm) and the mean medial bone defect was 7 mm (range 0 – 22mm). All the cement-less acetabular components were bone ingrown with the exception of one stable fibrous union. Allograft incorporation occurred at a mean of 7 months after surgery. Neither the status of Kohler’s line nor the Paprosky class correlated with eventual radiographic or clinical results.

Discussion: We present a simple method of evaluation of acetabular bone deficiency on the A-P pelvis radiograph employing a triangle that locates the ideal center of rotation of the hip. Superior bone loss upto 25 mm and medial migration as much as 22 mm has been successfully reconstructed employing impacted, cancellous allograft, large porous coated hemispherical Cementless acetabular components and screw fixation with excellent outcomes at intermediate-follow-up. Larger defects necessitate complex reinforced cage reconstruction.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_IV | Pages 437 - 438
1 Apr 2004
Rasquinha V Mohan V Bevilacqua B Rodriguez J Ranawat C
Full Access

Introduction: Polyethylene wear debris is the main contributing factor that leads to aseptic loosening and osteolysis. The main objective of this study was to evaluate the role of hydroxyapatite (HA) in third-body polyethylene wear in total hip arthroplasty.

Materials: 199 primary cementless THA’s (174 patients) performed by a single surgeon were enrolled in a prospective randomized study comprising hydroxyapatite and non-hydroxyapatite coated femoral implants. The femoral component had metaphyseal-diaphyseal fit design with proximal plasma sprayed titanium circumferential porous coating. The hydroxyapatite coating was 50 – 75 micrometers over the porous surface with the components of identical design. The acetabular component was plasma sprayed titanium porous coated shell without hydroxyapatite. T he polyethylene liners were machined molded from ram extruded Hi-fax 1900H polyethylene resin gamma-sterilized in argon (inert) gas. Clinical and Radiographic evaluation was performed employing HSS scores and Engh criteria.

Results: At a mean follow-up of 5 years, the radiographs of 83 HA and 73 Non-HA hips were evaluated by two independent observers utilizing computer-assisted wear analysis on digitized standardized radiographs described by Martell et al (1997). The radiographs were also evaluated for osteolysis or aseptic loosening.

The mean linear wear rate in HA group was 0.19mm/yr and in the non-HA group was 0.21mm/yr, which was not significant (p> 0.05). There was no case of osteolysis or aseptic loosening of any component. Both groups had comparable outcomes in terms of HSS scores, walking ability and sports participation.

Discussion: This study has attempted to demonstrate through an appropriately controlled in vivo study that hydroxyapatite does not play a significant role in third-body polyethylene wear in THA at a mean follow-up of five years. The concern of three-body wear with hydroxyapatite coating is no greater than porous coated cementless implants.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_IV | Pages 417 - 417
1 Apr 2004
Rasquinha V Mohan V Bevilacqua B Rodriguez J Ranawat C
Full Access

Introduction: Polyethylene wear debris is the main contributing factor that leads to aseptic loosening and osteolysis. The main objective of this study was to evaluate the role of hydroxyapatite (HA) in third-body polyethylene wear in total hip arthroplasty.

Materials: 199 primary cementless THA’s (174 patients) performed by a single surgeon were enrolled in a prospective randomized study comprising Hydroxyapatite and non-hydroxyapatite coated femoral implants. The femoral component had metaphyseal-diaphyseal fit design with proximal plasma sprayed titanium circumferential porous coating. The hydroxyapatite coating was 50 – 75 micrometers over the porous surface with the components of identical design. The acetabular component was plasma sprayed titanium porous coated shell without hydroxyapatite


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_IV | Pages 417 - 417
1 Apr 2004
Rasquinha V Ranawat A Bevilacqua B Rodriguez J Ranawat C
Full Access

Introduction: This purpose of this prospective review is to evaluate the 12-year results of a previously unreported collarless, cemented, normalized, straight-backed Omnifit femoral stem with a surface roughness of 30–40 microinches.

Methods: Between January 1986 and June 1991, a single surgeon prospectively implanted 305 consecutive cemented THA’s (275 patients) utilizing second-generation cement technique and a posterolateral exposure. The acetabular component was cemented all-polyethylene (4150 resin), with calcium stearate and gamma sterilized in air. Two independent observers employing a patient administered questionnaire, HSS scores and established radiographic criteria performed clinical and radiographic evaluation. The cumulative survivorship analysis was analyzed in terms of best case and worst case.

Results: The demographics included a mean age of 70 years with 170 females and 105 males and a mean body weight of 154 lbs. The preoperative diagnosis was osteoarthrosis in 260 hips, rheumatoid arthritis in 20, fracture in 13, AVN in 8, Paget’s in 2 and hip dysplasia in 2. The mean HSS score was 37.5 out of 40 at last follow-up. The mean clinical follow-up was 12 years and mean radiographic follow-up was 10 years. The overall projected clinical survival was 95.1% at 15 years (CI +3.4%). The cement mantle was grades A or B in 90% and grade C1 in 10%. Femoral stem alignment was neutral in 53%, valgus in 31% and varus in 16%. Revision THA was performed in 9 hips. Both components were revised in 3 cases (2 infection, 1 recurrent dislocation). Socket revision was performed in 4 cases (1.31%) and femoral component revision in 2 cases (0.65%) due to aseptic loosening.

Discussion: This report demonstrates the excellent results of the collarless, cemented, normalized femoral stem with a surface roughness of 30–40 microinches. Although controversy exists on surface roughness and porosity reduction, meticulous technique in the attainment of a centralized femoral stem with a good cement mantle, provides a reproducible, high quality of function and durability of THA in patients 60 – 80 years of age at 12-year follow-up.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_IV | Pages 418 - 418
1 Apr 2004
Neginhal V Rasquinha V Holden D Rodriguez J Ranawat C
Full Access

Introduction: Mid-term follow-up has demonstrated good implant longevity for titanium fiber mesh and sintered bead designs, but few reports exist demonstrating the results of titanium plasma spray coated acetabular components in primary THR.

Methods: Between 1992 and 1995, a single surgeon performed 305 non-cemented primary THA’s in 260 patients. The selection criteria for non-cemented fixation were age younger than 65 and/or good bone quality. The hemispherical titanium plasma sprayed acetabular components were implanted with under reaming of 2 mm. Solid shells were used if a snug fit was attained with the trial. Screws were used to supplement fixation based on the surgeon’s judgment. The polyethylene liners were machined molded from ram extruded Hi-fax 1900H polyethylene resin gamma-sterilized in air or argon (inert) gas with elevated walls and locked into the shell via a Ring-Loc mechanism. These were mated with a 28mm cobalt-chrome femoral head and modular femoral component of metaphyseal-diaphyseal fit design with proximal titanium plasma spray porous coating. 15 patients have died, and 35 patients were lost to follow-up, leaving 225 hips in 210 patients that constitute the study cohort. The mean age was 55 years (range 24 – 60 years), and average.

Results: From this cohorts of patients, seven hips have been revised, two for infection, one for instability and four for osteolysis. The remaining patients had an average HSS score of 38 out of 40 at recent follow-up. Radiographically, the average cup inclination was 38.8 degrees. Eight hips had one zone interface lucencies, while three had two zone lucencies. There were no cases of continuous interface radiolucency or failure to achieve bone ingrowth. Nine hips demonstrated osteolysis, mostly in zones 2. The acetabular components in the cases with osteolysis were shells with unfilled screw holes in 3 and shells fixed with screws in 6. No osteolysis was detected in cases with solid hemispherical acetabular shells.

Discussion: Hemispherical titanium plasma sprayed ace-tabular components have achieved excellent durability at medium term follow-up, with a low incidence of fixation failure or osteolysis, and a low re-operation rate, even in a young, active group of patients. However, shells with screw holes appear to predispose to osteolytic lesions.