Advertisement for orthosearch.org.uk
Results 1 - 2 of 2
Results per page:
Applied filters
Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 93 - 93
1 Mar 2010
Yamaguchi S Kizuki T Takadama H Matsushita T Kokubo T Nakamura T
Full Access

Titanium alloys such as Ti-6Al-4V and Ti-6Al-7Nb have been widely used as orthopedic implants such as artificial hip joint, because of their high mechanical strengths and good biocompatibilities. Recently, new kinds of titanium-based alloys free from elements such as V and Al, which are suspicious for cytotoxicities, are being developed. Ti-15Zr-4Ta-4Nb (Ti-15-4-4) is one of such alloys and shows high mechanical strength and corrosion resistance which are comparable to those of the Ti-6Al-4V alloy. In the present study, chemical treatments for providing bone-bonding ability to this alloy were investigated. Apatite-forming ability in a simulated body fluid (SBF) was used as an indication of the bone-bonding ability.

Ti-15-4-4 alloy plates 10×10×1 mm3 in size were soaked in 5M-NaOH solution at 60 °C for 24 h, soaked in 100mM-CaCl2 solution at 40 °C for 24 h, heated at 600 °C for 1 h and then soaked in hot water at 80 °C for 24 h. Surface structural changes of the alloy with these treatments were analyzed by a field emission scanning electron microscope (FE-SEM) attached with an energy-dispersive X-ray spectrometer (EDX), Thin-film X-ray diffraction (TF-XRD) and Fourier transform confocal laser Raman spectroscopy (FT-Raman). Scratch resistance of surface layer of the alloy was measured by a thin-film scratch tester. Apatite-forming ability of the specimens was examined by soaking them in SBF for 3 days. Long-term stability of the apatite-forming ability was examined after keeping the specimens in an incubator with relative humidity of 95 % at 80 °C for 1 week.

A sodium hydrogen titanate layer about 500 nm in thickness was formed on the surface of the alloy by the NaOH treatment. This specimen formed some amounts of apatite in SBF within 3 days, but its scratch resistance was as low as less than 10 mN. When the NaOH-treated specimen was subsequently heat treated, the sodium hydrogen titanate transformed into sodium titanate to give scratch resistance as high as 92 mN, but lost its apatite-forming ability.

When the NaOH-treated specimen was soaked in CaCl2 solution, the sodium hydrogen titanate was isomorphously transformed into calcium hydrogen titanate. Thus treated specimen increased its apatite-forming ability, but its scratch resistance was still low. When the NaOH- and CaCl2-treated specimen was subsequently heat treated, the calcium hydrogen titanate transformed into calcium titanate to give scratch resistance as high as 169 mN. However, its apatite-forming ability was lost. Thus treated specimen was then soaked in hot water. As a result, its apatite-forming ability remarkably increased without decreasing scratch resistance. It showed high apatite-forming ability even after a long-term-stability test.

The NaOH-, CaCl2-, heat- and hot-water-treated Ti-15-4-4 alloy is believed to be promising materials for artificial joints, because of its high apatite-forming ability with long-term stability as well as high scratch resistance.


Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_I | Pages 177 - 177
1 Mar 2008
Moro T Takatori Y Ishihara K Konnno T Takigawa Y Takadama H Nakamura K Kawaguchi H
Full Access

Despite improvements in techniques and materials, aseptic loosening of artificial hip joints remains as the most serious problem. This study investigated mechanical and biological effects of biocompatible 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer on prevention of aseptic loosening.

To examine mechanical effects of MPC grafting, we performed hip simulator tests (3million cycles) using cross-linked polyethylene (CL-PE) liners with or without nano-grafting of MPC onto articulating surface (MPC liner/CL-PE liner) and PE liner against CoCrMo heads. To examine biological responses of macrophages and osteoblasts, we prepared MPC nanoparticles (500nm). Using in vitro/vivo murine particle-induced osteolysis model, we examined biological effects of MPC nanoparticles on osteoclastogenesis.

The friction torque was about 90% lower in MPC liners than control liners. Total amounts of wear produced from MPC liner was about 1/5and 1/30 of those from CL-PE and PE liners, respectively. Three-dimensional analysis and SEM analysis of MPC liners revealed no or little wear. The effect of MPC nanografting was maintained even after the test, because XPS analysis confirmed the remainder of specific spectra of MPC on the liner surface. When nanoparticles were exposed to cultured mouse macrophages, MPC nano particles were hardly phagocytosed by macrophages and did not enhance the concentration of bone resorptive cytokines and PGE2. Furthermore, culture medium of macrophages exposed to MPC nanoparticles did not induce RANKL expression in osteoblasts and osteoclastogenesis from bone marrow cells. In vivo murine osteolysis model, particle-induced bone resorption was hardly observed in mice implanted MPC nanoparticles.

Some medical devices grafted MPC onto itssurface have been already used under authorization of the FDA. This study demonstrated that MPC grafting markedly decreases wear production. In addition, even if wear particles are produced, they are biologically inert in respect to phagocytosis by macrophages and subsequent resorptive actions, suggesting an epochal improvement of artificial hip joints preventing aseptic loosening.