Advertisement for orthosearch.org.uk
Orthopaedic Proceedings Logo

Receive monthly Table of Contents alerts from Orthopaedic Proceedings

Comprehensive article alerts can be set up and managed through your account settings

View my account settings

Visit Orthopaedic Proceedings at:

Loading...

Loading...

Volume 101-B, Issue SUPP_4 April 2019 International Society for Technology in Arthroplasty (ISTA) 31st Annual Congress, London, England, October 2018. Part 1.

T. Kutsuna K. Hino K. Watamori H. Kiyomatsu H. Miura

Background

Patient satisfaction after total knee arthroplasty (TKA) has been lower than after a similar procedure, total hip arthroplasty. Poor subjective outcomes after TKA may be partially explained by abnormal kinematics patterns after TKA. The purpose of this study was to analyse rotational kinematics patterns in knees that had undergone posterior stabilized (PS)-TKA, and to clarify the relationships between rotational kinematics patterns and patient satisfaction, as well as between rotational kinematics patterns and knee function.

Materials & Methods

A total of 49 osteoarthritis knees after primary PS-TKA (NexGen LPS-Flex fixed bearing knee system) were included in this study; deformed valgus, severe flexion contractures, and highly unstable knees were excluded. We used a computer navigation system and measured knee kinematics after each surgery was completed. A single investigator gently applied a manual range of motion from full extension to flexion. The angle of the internal rotation of the tibia was measured automatically at 0º, 30º, 45º, 60º, and 90º, along with maximum extension and flexion. We categorized the post-operative rotational kinematics patterns for individual cases, focusing on the initial knee flexion from 0–30º. Type A corresponded to an increased internal rotation angle of the tibia during the initial knee flexion (screw home-like movement). Type B corresponded to an increased external or an unchanged rotation angle of the tibia. We examined the range of motion (ROM) at 6 months after surgery and assessed the 2011 Knee Society Score (2011 KSS) at ≥1 year following surgery.

Statistical analysis. The difference between the two groups was compared using a Wilcoxon rank sum test. Analyses were performed with JMP statistical software v8.0 (SAS Institute). A p-value of <0.05 was regarded as significant.


Y. Okamoto S. Otsuki T. Okayoshi H. Wakama T. Murakami K. Nakagawa M. Neo

Although the pre- or intraoperative flexion angle in TKA has been commonly considered as a predictor of the postoperative flexion angle, patients with well flexion intraoperatively cannot necessarily obtain deep flexion angle postoperatively. The reason why inconsistencies remains has been unsolved. The intraoperative compressive force between femoral and tibial components has the advantage of the sequential changes during knee motion. However, the relationship between the compressive force and the postoperative ROM has not yet been clarified. We aimed to evaluate the intraoperative femorotibial compressive force during passive knee motion, and determine the relationship between the compressive force and the postoperative flexion angle.

A total of 11 knees in 10 patients who underwent primary cruciate-retaining (CR) TKA (The FINE Total Knee System; Teijin Nakashima Medical Co., Ltd., Okayama, Japan) for osteoarthritis were studied retrospectively, with a mean age of 76 years via a measured resection technique. We developed a customized measurement device mimicking the tibial component with this platform of six load sensors arranged in two rows (medial and lateral) by three tandem sets (anterior, center and posterior): anteromedial (AM), anterolateral (AL); centromedial (CM), centrolateral (CL); and posteromedial (PM), posterolateral compartment (PL) (Fig. 1). At the step of the implant trial, this device was placed on the tibia with compressive force recorded three times, while the knee was subsequently taken from 0° to full flexion manually in 15 seconds with the flexion angle of the knee recorded simultaneously by using an electric goniometer (Fig. 2). Eligibility were evaluated for ROM using a long-armed goniometer preoperatively and at 6 months postoperatively. A p value of < 0.05 was considered significant.

The mean compressive force at AM, AL, CM, CL, PM and PL was 0.7, 0.5, 1.3, 1.2, 3.4 and 2.6 kgf, with the peak force of 4.2, 2.5, 4.1, 2.5, 7.3 and 4.7 kgf, respectively. The mean pre- and postoperative extension and flexion angles were −11° and −6°; and 115° and 113°, respectively. There were no significant correlations between the mean force in any region of interest (AM to PL) and the postoperative flexion angle. The peak force in PM showed little correlation with the postoperative flexion angle (r = −0.17, p = 0.54), however, that in PL was strongly negatively correlated with the postoperative flexion (r = −0.86, p < 0.01).

The current results suggest the presence of less force on the lateral side in flexion. We speculate that lower compressive force at the lateral side is essential for deep flexion as it has been reported that the lateral structure has more laxity than the medial side during flexion in healthy knees. Measurement between the femoral and tibial compressive force can contribute an achievement of more flexion angle following CR-TKA.


D. Rastogi M. K. Dwivedi

Introduction

Periprosthetic joint infection (PJI) is a serious problem and requires great effort and cost for its treatment. Treatment options may vary from resection arthroplasty, retention of prosthesis with debridement, one stage revision and two stage revision with handmade antibiotic impregnated cement spacer or with prefabricated antibiotic loaded cement spacer. Two stage revision remains the gold standard for the treatment of periprosthetic joint infection after Total Hip Arthroplasty (THA). This study was aimed to find the efficacy and cost effectiveness of handmade antibiotic impregnated articulating cement spacer over commercially available prefabricated antibiotic loaded cement spacer for the treatment of deep PJI of hip prosthesis and to evaluate its functional outcome.

Material and methods

A total of 23 PJI patients were enrolled in this prospective cohort study. In the two stages of revision, the first stage consisted of thorough debridement, implant removal and implantation of handmade articulating antibiotic impregnated cement spacer. The second stage surgery consisted of removal of cement spacer, thorough debridement and implantation of new prosthesis. All patients were followed for a period of 24 months.


C. Wilson M. Inglis D. George

Introduction

Revision total hip arthroplasty is a complex procedure and becoming more common. Acetabular implant loosening or fracture has previously been treated with a cup and cage construct. Recent studies have shown significant failure rates with Cup Cage constructs in more complex 3B and 3C Acetabular revisions. As a result the use of 3D printed custom made acetabular components has become more common.

Method

We present 5 cases with severe acetabular bone loss that were treated with 3D printed acetabular components. The components were manufactured by OSSIS medical in New Zealand. The patient's original femoral stem was retained in all cases. Pre operatively the implant design was approved by the arthroplasty team prior to final manufacture. Implants were provided with a sterilisable model used intraoperatively for reference.


C. Wilson J. Sires S. Lennon M. Inglis

Introduction

Despite improvement in implants and surgical techniques up to 20% of Total Knee Arthroplasty TKA patients continue to report dissatisfaction. The ATTUNE Knee System was designed to provide better patellar tracking and stability through the mid-range of flexion and therefore improve patient outcomes and satisfaction.

Aims

The aims of this study were to assess patient outcomes in a consecutive series of ATTUNE TKA and ensure early results were comparable to other TKA systems in Australia.


C. Wilson V. Singh

Introduction

The intra-operative diagnosis of Prosthetic Joint Infection (PJI) is a dilemma requiring intra-operative sampling of suspicious tissues for frozen section, deep tissue culture and histopathology to secure a diagnosis. Alfa defensin-1 testing has been introduced as a quick and reliable test for confirming or ruling out PJI. This study aims to assess its intra-operative reliability compared to the standard tests.

Methods

Twenty patients who underwent revision hip and knee arthroplasty surgery were included. Patients joint aspirate was tested intra-operatively with the Synovasure kit, which takes approximately ten minutes for a result. Our standard protocol of collecting 5 deep tissue samples for culture and one sample for histopathology was followed. Results for Alfa defensin-1 test were then compared with final culture and histopathology results in all these patients.


A. Paulus S. Dirmeier S. Hasselt P. Kretzer R. Bader V. Jansson S. Utzschneider

Introduction

It is well-known that wear debris generated by metal-on-metal hip replacements leads to aseptic loosening. This process starts in the local tissue where an inflammatory reaction is induced, followed by an periprosthetic osteolysis. MOM bearings generate particles as well as ions. The influence of both in human bodies is still the subject of debate. For instance hypersensitivity and high blood metal ion levels are under discussion for systemic reactions or pseudotumors around the hip replacement as a local reaction. The exact biopathologic mechanism is still unknown. The aim of this study was to investigate the impact of local injected metal ions and metal particles.

Material and Methods

We used an established murine inflammation model with Balb/c mice and generated three groups. Group PBS (control group, n=10) got an injection of 50µl 0.1 vol% PBS-suspension, Group MI (Metal-ion, n=10) got an injection of 50µl metal ion suspension at a concentration of 200µg/l and Group MP (Metal-particles, n=10) got an injection of 50µl 0.1 vol% metal particle suspension each in the left knee. After incubation for 7 days the mice were euthanized and the extraction of the left knee ensued. Followed by immunhistochemical treatment with markers of inflammation that implied TNFα, IL-6, IL-1β, CD 45, CD 68, CD 3, we counted the positive cells in the synovial layer in the left knees by light microscopy, subdivided into visual fields 200× magnified. The statistical analysis was done with Kruskal-Wallis test and a post hoc Bonferroni correction.


I. Adekanmbi Z. Ehteshami C. Hunt M. Dressler

Introduction

In Total Hip Arthroplasty (THA), proper bone preparation technique is fundamental to preventing intraoperative fracture. Anecdotally, surgeons suggest they can avoid fracture by listening for changes in the pitch of a mallet strike during broaching. Consequently, it is not surprising that researchers have explored vibroacoustic methods to prevent [1] and identify bone fractures [2, 3]. For instance, a shift in frequency of the acoustic signals during impaction has been correlated with initial stability [4, 5]. In-spite of these research-based successes, we are unaware of an intraoperative application for THA. We submit that idiosyncratic variability during impaction [6] may overwhelm analytical techniques developed in a controlled laboratory environment. The purpose of this test, therefore, was to evaluate the effect of several strike parameters on the vibro-acoustic response during impaction. Specifically, we hypothesized that the angle, location, and force of impaction would produce ‘false-positives’ in frequency regions that have been used to identify fracture [7].

Methods

A Sawbones femur (SKU1121, Medium) was prepared and broached using standard surgical technique for the Summit hip system (DePuy Synthes) progressing from size 0 to 4. The size 4 broach was firmly seated and impacted ten times (n=10) for each of the prescribed conditions (Table 1) while securely holding the femur by hand. Vibroacoustic data from an accelerometer attached distally on the femur and a directional microphone located within 1 metre (Figure 1) were acquired at a sampling rate of 40kHz and postprocessed using LabView. Spectrograms were generated for qualitative comparisons, while fast fourier transform (FFT) with normalised amplitudes for each strike facilitated quantitative analysis of the area under the FFT curve (AU-FFT). Strike conditions were monitored to ensure the groups were consistent and distinct (Table 1).


L. Cavagnaro G. Burastero F. Chiarlone L. Felli

Introduction

Bone loss management represents one of the most challenging issues for the orthopaedic surgeon. In most cases, stems, structural allograft, TMcones, and sleeves are adequate to allow optimal implant stability and durable fixation. In selected cases of wide metadiaphyseal bone defects, these devices do not provide proper intraoperative stability. In such scenarios, further steps are needed and include complex modular reconstruction, substitution with megaprosthesis (exposing patients at high risk of early failure) or joint arthrodesis that can yield unacceptable results. The aim of this paper is to present early results obtained with a new custom-made implant for complex metadiaphyseal bone defects management in knee revision surgery. By means of case presentations the authors would highlight the possibilities and technical notes of this novel device in complex knee revision surgery.

Methods

Since2015, 8 custom-made porous titanium devices were implanted for massive bone defect management in 6 knee arthroplasty revision procedures. Five patients were staged revision for periprosthetic joint infection (PJI) and one patient underwent a staged revision for post-traumatic septic arthritis. Main demographic and surgical data were collected. Clinical (Range of Movement [ROM], Knee Society Score [KSS] and Oxford Knee Score [OKS]), radiological findings and complications were recorded at different time points and statistically evaluated. Mean follow up was 19.5 ± 9.6months.


C. De Biase G. Fiorentino F. Catellani G. Ziveri L. Banci A. Meoli H. R. Bloch

Background

The current use of a spherical prosthetic humeral head in total shoulder arthroplasty results in an imprecise restoration of the native geometry and improper placement of the center of rotation, maintained in a constant position, in comparison to the native head and regardless of glenoid component conformity.

A radially-mismatched spherical head to allow gleno-humeral translation is a trade-off that decreases the contact area on the glenoid component, which may cause glenoid component wear. This finding suggests that the use of a non-spherical head with a more conforming glenoid component may reduce the risk of glenoid component wear by allowing gleno-humeral translation while increasing the contact area.

A non-spherical prosthetic head more accurately replicates the head shape, rotational range of motion and gleno-humeral joint kinematics than a spherical prosthetic head, compared with the native humeral head. The combination of inversion of the bearing materials with the non-spherical configuration of the humeral head may thus decrease polyethylene wear.

Aim of the present study is to evaluate in vitro wear behaviour of an all-polyethylene elliptical humeral head component against a metallic glenoid component in an anatomic configuration.

Material and methods

The prosthetic components tested are from the Mirai® Modular Shoulder System by Permedica S.p.A.. The prosthetic bearing components were tested in their anatomic configuration: the humeral head rubbing against the glenoid inlay, assembled over the glenoid base-plate.

The glenoid insert is made of Ti6Al4V alloy coated with TiNbN. The glenoid insert, as the glenoid base-plate have the same shape which reproduce the native shape of the glenoid. Moreover, the glenoid insert has a concave articular surface described by two different radii on orthogonal planes.

The vitamin E-blended UHMWPE humeral head is not spherical but elliptic-shaped with an articular surface described by two different profiles in sagittal and coronal plane.

The component sizes combination tested have the greatest radial mismatches allowed between humeral head and glenoid insert.

The test was performed up to 2.5 million of cycles applying a constant axial load of 756 N.


M. Wong B. Desai M. Bautista O. Kwon G. Chimento

PURPOSE

YouTube is a video sharing platform that is a common resource for patients seeking medical information. The objective of this study is to assess the educational quality of YouTube videos pertaining to total knee arthroplasty and knee arthritis.

METHODS

A systematic search for the terms “knee replacement” and “knee arthritis” was performed using Youtube's search function. Data from the 60 most relevant videos were collected for each search term. Videos not in English or those without audio or captions were excluded. Quality assessment checklists with a scale of 0 to 10 points were developed to evaluate the video content. Videos were grouped into poor quality (grade 0–3), acceptable quality (grade 4–7) and excellent quality (grade 8– 10), respectively. Four independent reviewers assessed the videos using the same grading system and independently scored all videos. Discrepancies regarding the scoring were clarified by consensus discussion.


T. Zumbrunn P. Schuetz F. von Knoch S. Preiss R. List S. J. Ferguson

BACKGROUND

UKA is functionally superior to TKA, with kinematics similar to native knees, nevertheless, UKA implants are used in less than 10% of cases. While advantages of UKA are recognized, ACL-deficiency is generally considered a contraindication. The hypothesis of this study was that fix bearing UKA in ACL-deficient knees, with appropriate adaptation of implant placement, would result in similar kinematic trends to conventional UKA with an intact ACL.

METHODS

Ten conventional UKA patients were compared to eight patients with the same implant but a deficient ACL. A 50% tibial slope reduction was applied to compensate for instability resulting from the deficient ACL. Knee kinematics were evaluated using a moving fluoroscope allowing to track the knee joint during deep knee bend, level walking, ramp descent and stair descent. The results were further compared to six TKA patients.


J. Y. Jenny D. Saragaglia

OBJECTIVES

The use of a mobile bearing has been suggested to decrease the rate of patellar complications after total knee arthroplasty (TKA). However, to resurface or retain the native patella remains debated. Few long-term results have been documented. The present retrospective study was designed to evaluate the long-term (more than 10 years) results of mobile bearing TKAs on a national scale, and to compare pain results and survivorship according to the status of the patella.

The primary hypothesis of this study was that the 10 year survival rate of mobile bearing TKAs with patella resurfacing will be different from that of mobile bearing TKAs with native patella retaining.

METHODS

All patients operated on between 2001 and 2004 in all participating centers for implantation of a TKA (whatever design used) were eligible for this study. Usual demographic and peri-operative items have been recorded. All patients were contacted after the 10 year follow-up for repeat clinical examination (Knee Society score (KSS), Oxford knee questionnaire). Patients who did not return were interviewed by phone call. For patients lost of follow-up, family or general practitioner was contacted to obtain relevant information about prosthesis survival. TKAs with resurfaced patella and TKAs with retained native patella were paired according to age, gender, body mass index and severity of the coronal deformation (with steps of 5°). Pain score, KSS and Oxford knee score were compared between two groups with a Student t-test at a 0.05 level of significance. Survival curve was plotted according to the actuarial technique, using the revision for mechanical reason as end-point. The influence of the patella status was assessed with a logrank test at a 0.05 level of significance.


M. Van De Kleut G. Athwal X. Yuan M. Teeter

Introduction

Total shoulder arthroplasty is the fastest growing joint replacement in recent years, with projected compound annual growth rates of 10% for 2016 through 2021 – higher than those of both the hip and knee combined. Reverse total shoulder arthroplasty (RTSA) has gained particular interest as a solution for patients with irreparable massive rotator cuff tears and failed conventional shoulder replacement, for whom no satisfactory intervention previously existed. As the number of indications for RTSA continues to grow, so do implant designs, configurations, and fixation techniques. It has previously been shown that continuous implant migration within the first two years postoperatively is predictive of later loosening and failure in the hip and knee, with aseptic loosening of implant components a guaranteed cause for revision in the reverse shoulder. By identifying implants with a tendency to migrate, they can be eliminated from clinical practice prior to widespread use. The purpose of this study is to, for the first time, evaluate the pattern and magnitude of implant component migration in RTSA using the gold standard imaging technique radiostereometric analysis (RSA).

Methods

Forty patients were prospectively randomized to receive either a cemented or press-fit humeral stem, and a glenosphere secured to the glenoid with either autologous bone graft or 3D printed porous titanium (Aequalis Ascend Flex, Wright Medical Group, Memphis, TN, USA) for primary reverse total shoulder arthroplasty. Following surgery, partients are imaged using RSA, a calibrated, stereo x-ray technique, at 6 weeks (baseline), 3 months, 6 months, 1 year, and 2 years.

Migration of the humeral stem and glenosphere at each time point is compared to baseline. Preliminary results are presented, with 15 patients having reached the 6-month time point by presentation.


T. Pandorf R. Preuss

Introduction

Metallic resurfacing systems have been widely used until pseudotumors and ALTR have been clinically found and related to excessive wear of these metal-on-metal hip systems. Hence, surgeons widely abandoned the use of resurfacing systems. Meanwhile, there is a ceramic on ceramic (CoC) resurfacing system (Embody, London, UK) made of zirconia toughened alumina (BIOLOX®delta, CeramTec, Plochingen, Germany) in a clinical safety study. Even though conventional CoC hip systems are known for their excellent wear behavior, it has to be ensured that intraoperative and in-vivo deformations of the ceramic acetabular cup do not infringe the proper functionality of the system. The method of determining the minimum clearance of such a system will be presented here.

Materials and Methods

Combined experimental and numerical results were used to determine the deformation of the ceramic shell. In a cadaver lab, the resulting deformations after impaction of generic metal shells have been measured, see e.g. [1] for the method of measurement. The maximum deformation has been chosen for further calculation. Additionally, the stiffness of both generic metal and ceramic shells has been measured using ISO 7206–12. The deformation of the ceramic shells were then calculated by the equation

where uc and um are the deformations of the ceramic and the metal shell, respectively, and Km and Kc are the respective stiffnesses. Additionally, in a finite element simulation, the resulting deformation of the ceramic shell under in-vivo conditions was calculated and superposed with uc. The resulting deformation was used as the minimum value of the clearance for the ceramic resurfacing system.


A. Zembsch S. Dittrich S. Dorsch

Aims

Accurate placement of acetabular and femoral stem components in total hip arthroplasty (THA) is an important factor in the success of the procedure. A variety of free hand or navigated techniques is reported. Survivorship and complications have been shown to be directly related to implant position during THA. The aim of this cadaver study was to assess the accuracy of the placement of the components in THA using patient specific instruments (PSI) in combination with a 3D planning software and the direct anterior approach.

Method

Patient specific instruments (PSI) were developed to guide the surgeon during THA that were 3D printed with their bone models following a 3D software planning protocol (LPH software V2.5.1, Onefit-Medical, Eos Imaging Company, Besancon, France). Acetabular guides: cup, offset and straight reamer handle and impactor, femoral- and chisel guides were used in each THA (Fig. 1). To define anatomic bone landmarks and to generate a 3D model of each hip joint CT scans were performed preoperatively. The planning of component position was done by one surgeon (AZ) preop. Surgery was performed by two experienced surgeons (AZ, SD) on cadaver specimen with 4 hips in two separate series. A total of 8 hip replacements were evaluated pre- and postoperatively using CT-scans of each hip joint to compare planned to achieved results. Mechanical simulations of the guides were carried out to verify that there were no conflicts between the different instruments. To meet the ISO standard 16061: 2015 the compatibility of the instruments with the guides has been checked. Parameters were evaluated in 3D pelvic and femoral planes: center cup position, inclination angle, anteversion angle, cutting height and plan orientation, anteversion angle, flexion/extension angle, varus/valgus angle, anatomical and functional leg length, offset. Acceptance criteria: postop. parameters evaluated must not have a deviation of more than 5 degrees, 2,5 mm according to preop. planning. For every THA the test protocol has been completely realized.


K. Athwal P. Milner G. Bellier A. Amis

Introduction

In total knee arthroplasty (TKA) the knee may be found to be too stiff in extension, causing a flexion contracture. One proposed surgical technique to correct this extension deficit is to recut the distal femur, but that may lead to excessively raising the joint line. Alternatively, full extension may be gained by stripping the posterior capsule from its femoral attachment, however if this release has an adverse impact on anterior-posterior (AP) stability of the implanted knee then it may be advisable to avoid this technique. The aim of the study was therefore to investigate the effect of posterior capsular release on AP stability in TKA, and compare this to the restraint from the cruciate ligaments and different TKA inserts.

Methods

Eight cadaveric knees were mounted in a six degree of freedom testing rig (Fig.1) and tested at 0°, 30°, 60° and 90° flexion with ±150 N AP force, with and without a 710 N axial compressive load. The rig allowed an AP drawer to be applied to the tibia at a fixed angle of flexion, whilst the other degrees-of-freedom were unconstrained and free to translate/ rotate. After the native knee was tested with and without the anterior cruciate ligament (ACL), a cruciate-retaining TKA (Legion; Smith & Nephew) was implanted and the tests repeated. The following stages were then performed: replacing with a deep dished insert, cutting the posterior cruciate ligament (PCL), releasing the posterior capsule using an osteotome (Fig. 2), replacing with a posterior-stabilised implant and finally using a more-constrained insert.


K. Hagio M. Saito K. Akiyama H. Abe K. Aikawa

Introduction

Many minimally-invasive approaches have been described in an effort to improve short-term results of total hip arthroplasty (THA), aiming for fast recovery and prevention of dislocation. In our institution, we started to perform THA with SuperPATH approach, including preservation of soft tissue around the hip (James Chow et al. Musculoskelet Med 2011) since July 2014. The purpose of this study is to examine the short-term results of THA using SuperPATH, especially treatment progress of rehabilitation.

Materials and methods

We performed a study of 30 patients (30 hips) with osteoarthritis of the hip joint who had a THA with SuperPATH approach. There were 4 men and 26 women with an average age of 71 years, which were followed up for 24 months. Patients were clinically assessed with Merle d'Aubigne score, postoperative hip pain during walking by Numerical Rating Scale (NRS:0–10), complications and treatment progress of rehabilitation in regard to moving and activities of daily living. Implant alignment and stability were radiologically evaluated by annual X-ray and CT acquired two months after surgery.


P. Sa-Ngasoongsong S. Wongsak C. Jarungvittayakon K. Limsamutpetch T. Channoom V. Kawinwonggowit

Background

Periprosthetic joint infection (PJI) remains challenging as a “gold standard” for diagnosis has not yet been established. The aim of this study was to evaluate the accuracy of synovial fluid procalcitonin (SF-PCT) and serum procalcitonin as diagnostic biomarker for PJI and compared their accuracy with standard methods.

Materials and Methods

A single-centered prospective cohort study was conducted between 2015–2017 in 32 patients with painful hip or knee arthroplasty underwent revision surgery. Relevant clinical and laboratory data were collected. PJI was diagnosed based on the 2013 international consensus criteria. Preoperative blood sample and intraoperatively acquired joint fluid were taken for PCT measurement with a standard assay. Diagnostic accuracy was analyzed by the receiver-operating characteristic (ROC) curve and the area under the curve (AUC).


M. Casale B. Waddell C. Ojard G. Chimento T. Adams A. Mohammed

Background

Non-invasive hemoglobin measurement was introduced to potentially eliminate blood draws postoperatively. We compared the accuracy and effectiveness of a non-invasive hemoglobin measurement system with a traditional blood draw in patients undergoing total joint arthroplasty.

Methods

After IRB approval, 100 consecutive patients undergoing primary total hip or knee arthroplasty had their hemoglobin level tested by both traditional blood draw and a non-invasive hemoglobin monitoring system. Results were analyzed for the entire group, further stratifying patients based on gender, race, surgery (THA versus TKA), and post-operative hemoglobin level. Finally, we compared financial implications and patient satisfaction with the device. Paired t-test with 0.05 conferring significance was used. Stratified analyses of the absolute difference between the two measures were assessed using Mann- Whitney test. To assess the level of agreement between the two measures, the concordance correlation coefficient (CCC) was calculated.


K. Gustke C. Durgin

Background

Intraoperative balancing can be accomplished by either more prevalent but less predictable soft tissue releases, implant realignment through adjustments of bone resection or a combination of both. There is no published study directly comparing these methods.

Objective

To provide a direct comparison between implant realignment and traditional ligamentous release for soft tissue balancing in total knee arthroplasty using both objective kinematic sensor data to document final balance and patient reported outcomes.


A. Ramos M. Bola J. A. Simoes

Introduction

Shoulder arthoplasty has increased in the last years and its main goal is to relieve pain and restore function. Shoulder prosthesis enters in the market without any type of pre-clinical tests. Within this paper we present study experimental and computational tests as pre-clinical testing to evaluate total shoulder arthoplasty performance.

Materials and methods

An in vitro experimental simulator was designed to characterize experimentally the intact and implanted shoulder glenoid articulation. Fourth generation Sawbones® composite left humerus and scapula were used and the cartilage was replicated with silicone for the intact articulation (figure 1). In the intact experimental articulation we considered the inferior glenohumeral ligament as an elastic band with equivalent mechanical properties. For the implanted shoulder, the Comprehensive® Total Shoulder System (Biomet®) with a modular Hybrid® glenoid base and Regenerex® central post was considered (figure 2). The prostheses were implanted by an experienced surgeon and clinical results from orthopedic registers were collected.

The system structures were placed to simulate 90º in abduction, including the following muscle forces: Deltoideus 300N, Infraspinatus 120N, Supraspinatus 90N and Subscapularis 225N. The finite element model was created with tetrahedral linear elements with linear elastic and isotropic material for the humerus in figure 3, (Young's modulus for cortical bone − 16.5 GPa; trabecular bone − 124 MPa). Anisotropic behavior was considered for the scapula model (E11 = 342.1 MPa, E22 = 212.8 MPa, E33 = 194.4 MPa). The shoulder prosthesis was of polyethylene with 1GPa and titanium with 110 GPa. The Poisson's ratio was 0.3 in all material, except for polyethylene where we assumed a value of 0.4. A long-term post-operative condition was simulated.


E. Garcia-Rey E. Garcia-Cimbrelo R. Carbonell

Background

Aseptic loosening is rare with most cementless tapered stems in primary total hip arthroplasty (THA), however different factors can modify results. We ask if the shape and technique of three current different femoral components affects the clinical and radiological outcome after a minimum follow-up of ten years.

Methods

889 cementless tapered stems implanted from 1999 to 2007 were prospectively followed. Group 1 (273 hips) shared a conical shape and a porous-coated surface, group 2 (286 hips) a conical splined shape and group 3 (330 hips) a rectangular stem. Clinical outcome and anteroposterior and sagittal radiographic analysis were compared. Femoral type, stem position, femoral canal filling at three levels and the possible appearance of loosening and bone remodelling changes were assessed.


E. Garcia-Rey E. Garcia-Cimbrelo

Introduction

Impaction bone grafting (IBG) is a reliable technique for acetabular revision surgery with large segmental defects. However, bone graft resorption and cup migration are some of the limitations of this tecnique. We assess frequency and outcome of these complications in a large acetabular IBG series.

Patients and Methods

We analysed 330 consecutive hips that received acetabular IBG and a cemented cup in revision surgery with large bone defects (Paprosky types 3A and 3B). Fresh-frozen femoral head allograft was morselized manually. The mean follow-up was 17 years (3–26). All data were prospectively collected. Kaplan-Meier survivorship analysis was performed. Changes in different paremeters regarding cup position were assessed pre- and postoperatively and at the follow- up controls. Only variations greater than 5º and 3 mm were considered.


E. Garcia-Rey B. Garcia-Maya J. Gomez-Luque

Introduction

Although pelvic tilt does not significantly change after primary total hip arthroplasty (THA) at a short term, can vary over time due to aging and the possible appearence of sagittal spine disorders. Cup positioning relative to the stem can be influenced due to these changes.

Purpose

We assessed the evolution of pelvic tilt and cup position after THA for a minimum follow-up of five years and the possible appearence of complications.


K. Smulders J. Bongers M. Nijhof

Aim

The aim of this study is to evaluate if obesity negatively affects: (1) complication rate, (2) reoperation and revision rate and (3) functional outcome (based on patient reported outcome measures, PROMs) in revision total hip arthroplasty (rTHA). To our knowledge this is the only recent study to prospectively review these three aspects in what might be considered challenging rTHA.

Methods

444 rTHAs (cup, stem, both, n= 265, 57, 122 respectively), performed in a specialized high-volume orthopaedic center from 2013 to 2015, were prospectively followed. Complications and Oxford Hip Score (OHS) were evaluated at 4 months, 1 year and 2 years. Thirtyfour patients had a BMI >35 kg/m2 (obese), of which thirteen patients with a BMI >40 kg/m2 (morbidly obese).


N. Shah M. Vaishnav M. Patel U. Wankhade

Objective

To evaluate the clinical and functional outcomes obtained by combination of high-flexion Freedom® Total Knee System (TKS) and mini-subvastus approach in total knee replacement patients.

Method

This is a retrospective, observational, real world study conducted at Mumbai in India from 2011 to 2016. All patients who were above the age of 18 and operated for total knee replacement (TKR) with mini-subvastus approach using Freedom (Maxx Medical) by the senior author were included. The Implant survivorship was the survey endpoint; primary endpoint was range of motion (ROM); and secondary endpoints were AKSS (American Knee Society Score) and WOMAC (Western Ontario and McMaster Universities Osteoarthritis) scores collected pre- and post-operatively.


P. Damm A. Bender J. Dymke G. Duda

Introduction

Friction between head and cup is a primary factor for survival of total hip joint replacement (THR) and its gliding surfaces. In up to 40% of all revisions, the cup or inlay must be replaced as result of friction-induced wear [1]. Aim of the study was to measure the friction-induced temperature increase in vivo in THR and to identify possible individual parameters of influence.

Methods

For the in vivo measurement, an instrumented implant with an Al2O3/XPE-pairing and an integrated temperature sensor was used [Fig. 1] [2]. Ten patients were provided with such an instrumented implant.

Up to now, long time measurements were performed on six of these patients (Ø63y, Ø89kg). During these measurements, the subjects walked Ø60min on a treadmill with 4km/h. The investigation was performed Ø61 (43–70) months post operatively. Short time (Ø3min) in vivo load measurements during walking on treadmill were already available from the other four patients. These data were used to calculate the peak temperatures after 60mins of walking by using a model, based on the long time measurements.


K. Haeussler L. Haefner L. Butenschoen T. Pandorf

Introduction

Hip stem taper wear and corrosion is a multifactorial process involving mechanical, chemical and biological damage modes. For the most cases it seems likely that the mechanically driven fretting wear is accompanied by other damage modes like pitting corrosion, galvanic corrosion or metal transfer. Recent retrieval studies have reported that the taper surface topography may affect taper damage resulting from fretting and corrosion [1]. Therefore, the current study aimed to examine effects of different taper topography parameters and material combinations on taper mechanics and results regarding wear and corrosion have been investigated.

Materials and Methods

Combined experimental and numerical studies were conducted using titanium, cobalt-chromium and stainless steel generic tapers (Figure1). Uniaxial tensile tests were performed to determine the mechanical properties of the materials examined. For the taper studies macro-geometry of ceramic ball heads (BIOLOX®delta) and tapers were characterized using a coordinate measuring machine, and assembly experiments according to ISO7206-10 were conducted up to 4kN. Before and after loading, taper subsidence was quantified by assembly height measurements. Taper micro-geometry, taper surface deformation, and contact area were determined by profilometry. Initial numerical studies determined coefficients of friction for the three material combinations. Macro- and micro-geometries of the tapers were modelled, and taper subsidence and assembly load served as boundary conditions. Further studies used simplified models to examine effects of varying profile depths and angular gaps on surface deformation, taper subsidence, contact area, engagement length and pull-off force.


E. De Pieri D. Lunn K. Rasmussen A. Redmond S. J. Ferguson

Introduction

Preclinical testing of implants considers THR patients a homogenous group; in reality, patients are heterogeneous and previous large cohort studies have explored stratification and identified that THR patients function differently [1]. The wide- spread failure of the ASR hip highlighted the potential importance of patient characteristics [2], and a more robust pre- clinical testing procedure may have improved prediction of outcome. Therefore this study aimed to identify differences in hip contact force (HCF) in THR patients stratified by their functional ability.

Methods

133 THR patients, >12 months post-surgery, underwent 3D kinematic (Vicon, UK) and kinetic (AMTI, USA) analysis whilst walking at self-selected speed. HCF's, normalized by body weight, were computed through multibody modeling (AnyBody Technology, Denmark) during gait and a mean for each patient was calculated from three to five walking trials. Patients were stratified into three functionality groups by distribution around the mean gait speed for the full cohort of 1.1m/s. The low functioning group (LF) comprised cases with a gait speed ≤0.93 m/s (i.e. 1.1m/s ≤1SD), the mid functioning group (MF) comprised cases with a gait speed between 0.94 m/s and 1.25 m/s (cohort mean ± 1SD), while the high functioning group (HF) included cases walking ≥1.26 m/s. Differences between groups were analyzed using one- dimensional statistical parametric mapping [3]. Linear regression was used to test for significant differences across groups. The test statistic SPM{t} was evaluated at each point in the normalized time series, and a critical threshold corresponding to an error rate of α= 0.05 was calculated based on random field theory. Supra-threshold clusters with their associated p-values were then identified.


A. Torres T. Goldberg J. W. Bush

Introduction

Total knee arthroplasty is a highly effective procedure to improve the quality of life in patients with advanced osteoarthritis. The number of these procedures are expected to grow 174% by 2030. This growth rate is expected to economically strain the health care system. A potential solution to alleviate this problem is the utilization of single use instruments (SUI). Potential advantages of SUI include: improved operating room efficiencies, decreased costs associated with traditional instrument management (sterile processing, shipping), and decreased infection risk. The present study examines the clinical results of SUI compared to standard instrumentation. Furthermore, economic modeling is performed to examine the cost savings that is potentially realized with their use.

Materials and Methods

51 patients receiving a TKA with use of SUI were prospectively compared to 49 patients utilizing standard instrumentation. Knee Society Scores and Radiographic alignment will be evaluated. Adverse events will be recorded.

Economic modeling of SUI will be performed in 4 different areas: 1. Decreased infection burden; 2. Operating room logistics; 3. Sterile processing savings; and 4. Instrument logistical savings.


M. Elkabbani F. Haidar A. Osman T. Mohamed S. Tarabichi

The effect of intra-articular tranexamic acid on blood loss in concurrent bilateral total knee arthroplasty was studied in 60 patients in double blind fashion; one knee receiving tranexamic acid, the other knee receiving physiological saline acting as control. A single surgeon performed all operations utilising the same surgical technique and prosthesis. Mean blood loss from intra-articular drains was not significantly different, being 141ml in the tranexamic acid group and 163ml in the control group. Circumferential leg measurements at levels above, through and below the knees were not significantly different between groups on day two post-operatively compared to pre-operatively. Intra-articular tranexamic acid instillation did not lead to a significant reduction in blood loss in these patients.


M. Kato H. Warashina

Purpose

Leg length discrepancy after total hip arthroplasty (THA) sometimes causes significant patient dissatisfaction. In consideration of the leg length after THA, leg length discrepancy is often measured using anteroposterior (AP) pelvic radiography. However, some cases have discrepancies in femoral and tibial lengths, and we believe that in some cases, true leg length differences should be taken into consideration in total leg length measurement. We report the lengths of the lower limb, femur, and tibia measured using the preoperative standing AP full-leg radiographs of the patients who underwent THA.

Materials and methods

From August 2013 to February 2017, 282 patients underwent standing AP full-leg radiography before THA. Of the patients, 33 were male and 249 were female. The mean age of the patients was 65.7±9.4 years. We measured the distances between the center of the tibial plafond and lesser trochanter apex (A-L), between the femoral intercondylar notch and lesser trochanter (K-L), and between the centers of the tibial plafond and intercondylar spine of the tibia (A-K) on standing AP full-leg radiographs before THA operation. We examined the differences in leg length and the causes of these discrepancies after guiding the difference between them.


M. J. Chang S. B. Kang C. B. Chang C. Yoon W. Kim J. Y. Shin D. W. Suh J. B. Oh S. J. Kim S. H. Choi S. J. Kim H. S. Baek

The role of unicompartmental knee arthroplasty (UKA) in spontaneous osteonecrosis of the knee (SONK) remains controversial, even though SONK usually involves only medial compartment of the knee joint. We aimed to compare the survival rate and clinical outcomes of UKA in SONK and medial compartment osteoarthritis (MOA) via a meta-analysis of previous studies. MEDLINE database in PubMed, the Embase database, and the Cochrane Library were searched up to January 2018 with keywords related to SONK and UKA. Studies were selected with predetermined inclusion criteria: (1) medial UKA as the primary procedure, (2) reporting implant survival or clinical outcomes of osteonecrosis and osteoarthritis, and (3) follow-up period greater than 1 year. Quality assessment was performed using the risk of bias assessment tool for non-randomised studies (RoBANs). A random effects model was used to estimate the pooled relative risk (RR) and standardised mean difference. The incidence of UKA revision for any reason was significantly higher in SONK than in MOA group (pooled RR = 1.83, p = 0.009). However, the risk of revision due to aseptic loosening and all- cause re-operation was not significantly different between the groups. Moreover, when stratified by the study quality, high quality studies showed similar risk of overall revision in SONK and MOA (p = 0.71). Subgroup analysis revealed worse survival of SONK, mainly related to high failure after uncemented UKA. Clinical outcomes after UKA were similar between SONK and MOA (p = 0.66). Cemented UKA has similar survival and clinical outcomes in SONK and MOA. Prospective studies designed specifically to compare the UKA outcomes in SONK and MOA are necessary.


D. W. Suh M. J. Chang S. B. Kang C. B. Chang C. Yoon W. Kim J. Y. Shin J. B. Oh S. J. Kim S. H. Choi S. J. Kim H. S. Baek

Recently, concerns arose over the medial tibial bone resorption of a novel cobalt-chromium (CoCr) implant. This study aimed to investigate the effects of tibial component material, design, and patient factors on periprosthetic bone resorption and to determine its association with clinical outcomes after total knee arthroplasty (TKA). A total of 462 primary TKAs using five types of implants were included. To evaluate tibial periprosthetic bone resorption, we assessed radiolucent lines (RLL) and change in bone mineral density at the medial tibial condyle (BMDMT). Factors related to bone resorption were assessed using regression analysis. Clinical outcomes were also evaluated with respect to periprosthetic bone resorption. Compared to titanium (Ti) implants, CoCr implants showed a higher incidence of complete RLL (23.1% vs. 7.9% at two years post-TKA) and a greater degree of BMDMT reduction. However, there was no significant difference between the implants made of the same material. Increased medial tibial bone resorption was associated with male sex, osteoporosis, larger preoperative varus deformity, longer follow-up period, and lower body mass index. The periprosthetic bone resorption was not associated with clinical outcomes including changes in range of motion and WOMAC score. Furthermore, no cases warranted additional surgery. Periprosthetic bone resorption was associated with implant material but not with implant design. Moreover, patient factors were related to the medial tibial bone resorption post-TKA. However, the periprosthetic bone resorption was not associated with short-term clinical outcomes. We contend that researchers should incorporate integrative considerations when developing and assessing novel implants.


M. Meftah S. Boenerjous-Abel V. Siddappa P. White I. Kirschenbaum

Background

Exparel (Pacira Pharmaceuticals, Parsippany, NJ, USA) is a long-acting liposomal Bupivacaine extended release compound that can be used as peri-articular injection (PAI) or regional nerve block. The purpose of this study was to compare the post-operative analgesic efficacy of Exparel as a single administration adductor canal block (ACB) varsus PAI.

Methods

From May 2016 to June of 2017, 70 patients with primary knee osteoarthritis undergoing unilateral knee replacement were prospectively randomized into two cohorts: 1) PAI (Exparel 266 mg (20 ml vial) with 20 ml of 0.5% bupivacaine HCl, and normal saline to a total volume of 120 ml); 2) ACB (Subsartorial saphenous nerve using Exparel 266 mg in 20 ml vial). All patents underwent spinal anesthesia with comprehensive pre-emptive and postoperative multimodal pain protocol. All opioids given were converted to morphine equivalents. Pain was recorded at 4 – 12 hrs (day of surgery), post-operative day (POD) 1, 2, and 3 after surgery.


M. Meftah I. Kirschenbaum

Background

We identified several opportunities to significantly reduce cost for hip and knee arthroplasty procedures:

Customized instruments: by identifying the essential instruments for arthroplasty cases, we managed to have one universal tray for each case, and 3 specific trays from the implant manufacturing company.

Customized wrap-free, color-coded, stackable trays: by using a wrap-free trays, preparation time in central sterile, opening tray time in OR and turn-over time were reduced. Also, stackable trays were organized based on side and size, therefore only 2 trays needed to be used in each case.

Discounted implants: negotiated through optional case coverage with revision system and reps available as backup.

Optional rep coverage protocols: designed through process management of the operating room surgical staff and central sterile

Aim of the study was to measure the cost savings, efficacy, and outcomes associated with primary total hip and knee arthroplasty by implementing these protocol

Methods

This is a prospective study from January to October 2016 for selected primary total hip and knee arthroplasties were performed with the above protocols by 2 experienced arthroplasty trained surgeons, were followed for minimum 3 months. Initiating the cost saving protocols were achieved by re-engineering customized trays, discounted implants through optional case coverage (Sourced Based Selection of a Cooperating Manufacturer, MTD), and focused on process management of the staff training. Staff responsibilities were divided into 2 categories:

Familiarity of the instruments, implant, and techniques; trays set up and assurance of availability of the implants. These responsibilities were covered by a trained OR technician and the surgeon

Final verification of the accurate implants prior to opening the packaging. This was achieved by a trained OR nurse and the surgeon


M. Meftah I. Kirschenbaum

Background

There is a recent interest and focus on reducing the length of stay and early discharge after total joint replacement (TJR). However, safety criteria for same-day (SD) or next-day (ND) home discharge are not well defined. We implemented a screening questionnaire to identify patients that qualify for early home discharge. The aim of this study was to assess the efficiency of this questionnaire and short-term outcomes including re-admission and peri-operative complications after TJR.

Methods

Between January 2016 and July 2017, 423 consecutive primary hip and knee arthroplasties were performed by the two senior surgeons at our institution. All cases were followed for a minimum of 3-month prospectively after institutional review board approval. Patients were divided based on using a pre-operative questionnaire to determine their disposition after surgery. Group 1 includes 121 cases as control and group 2 includes 302 cases with pre-operative questionnaire. Spinal anesthesia and multimodal pain management including peri-articular injection was used in all cases.

The pre-operative questionnaire (PQ, Swiftpath, Inc) included an overall score based on age, comorbidities, body mass index, physical assessment, motivation, comprehension, family support, home setup (i.e. easy access/stairs), proximity to the hospital and lack of serious barriers to early home discharge. Patients were divided into 3 categories based on the score: SD/ND home, regular home discharge and rehabilitation/subacute nursing facility (SNF) discharge. Length of stay (LOS), post-operative complications, readmissions, and discharge destination were assessed. Correlation the questionnaire score and outcomes were assessed.


M. Meftah I. Kirschenbaum

Background

While tranexamic acid (TXA) has been well shown to reduce blood loss after joint replacement surgery, little is known regarding its effectiveness in obese patients. The aim of this study was to evaluate the effect of TXA changes in hematocrit and hemoglobin levels as well as incidence of packed red blood cell (pRBC) transfusions in obese patients undergoing total joint arthroplasty (TJA).

Material and Methods

Between January 2014 and May 2015, 420 consecutive primary joint replacements were performed by two surgeons at our institution. 157 patients (THA=29; TKA=128) were obese with a body mass index (BMI) greater than or equal to 30 kg/m2. Medical records were reviewed and identified that TXA was utilized in 85 (54.1%) arthroplasties [study group] and was compared to a consecutive series of 72 (45.9%) TJAs [control group]. TXA was given intravenously(IV) in two doses: (1) one gram prior to incision and (2) one gram at the time of femoral preparation in THA or prior to cementation in TKA. Changes in hemoglobin and hematocrit levels, number of pRBC transfusions, and occurrence of thrombolytic events were recorded.


J. Vigdorchik Z. Cizmic A. Elbuluk S. A. Jerabek W. Paprosky P. K. Sculco P. Meere R. Schwarzkopf D. J. Mayman

Introduction

Computer-assisted hip navigation offers the potential for more accurate placement of hip components, which is important in avoiding dislocation, impingement, and edge-loading. The purpose of this study was to determine if the use of computer-assisted hip navigation reduced the rate of dislocation in patients undergoing revision THA.

Methods and Materials

We retrospectively reviewed 72 patients who underwent computer-navigated revision THA [Fig. 1] between January 2015 and December 2016. Demographic variables, indication for revision, type of procedure, and postoperative complications were collected for all patients. Clinical follow-up was performed at 3 months, 1 year, and 2 years. Dislocations were defined as any episode that required closed or open reduction or a revision arthroplasty. Data are presented as percentages and was analyzed using appropriate comparative statistical tests (z-tests and independent samples t- tests).


J. Vigdorchik Z. Cizmic A. Elbuluk M. Bradley M. Miranda D. Watson D. Dennis S. Kreuzer

Introduction

The purpose of this study was to compare pre-operative acetabular cup parameters using this novel dynamic imaging sequence to the Lewinnek safe zone

Methods

We retrospectively reviewed 350 consecutive primary THAs that underwent dynamic pre-operative acetabular cup planning utilizing a pre-operative CT scan to capture the individual's hip anatomy, followed by standing (posterior pelvic tilt), sitting (anterior pelvic tilt), and supine X-rays. Using these inputs, we modeled an optimal cup position for each patient. Radiographic parameters including inclination, anteversion, pelvic tilt, pelvic incidence, and lumbar flexion were analyzed.


K. Yabuno N. Sawada M. Kanazawa

INTRODUCTION

Physical therapy(PT) is an integral component in the management of musculoskeletal conditions. On the other hand, there have been few reports exclusively dedicated to studying PT interventions on the same day of total hip arthroplasty(THA). In this study, we investigate the role of rehabilitation in the early postoperative period on length of stay (LOS), total medical cost, and physical recovery following total hip arthroplasty.

METHODS

A prospective cohort study was carried out 104 consecutive patients who underwent 107 primary THA performed by two surgeons. Data were gathered on all patients who underwent operative management from June2016 to June 2017. Institutional review board approval was obtained before performing this study. Patient demographic, physical, and clinical dates were collected for all patients, including age, gender, body mass index (BMI), diagnosis, Japan Orthopedic Association (JOA) hip score, Japanese Orthopedic Association Hip-Disease Evaluation Questionnaire (JHEQ) score, 3min walk test, and Timed up and go (TUG) test. The patient population consisted of 5men and 99women, with an average age of 66.0 years (range, 50–84 years). There were no statistically significant differences between patients who did and did not receive PT with regard to demographic, medical, and surgical data, including gender, age, BMI, JOA hip score, JHEQ score, preoperative 3min walk test, preoperative TUG test(Table 1). All patients underwent direct anterior approach THA through navigation system. Postoperative day (POD) 0 was defined as the same day of surgery. There were no standardized criteria by which patients were selected for participation in rehabilitation with physical therapists. Patient selection for POD 0 rehabilitation was based on the end of surgery time. For instance, when the end of surgery time was in the forenoon, the patients were received POD 0 PT. In contrast, patients who ended operation in the afternoon were classified POD 1 PT. Rehabilitation protocol was adjusted based on surgical approach, and all patients were weight bearing as tolerated. TUG test and 3min walk test was done by a physiotherapist on the seventh day postoperatively.


C. R. Friedrich E. Baker S. Bhosle D. Justin

Periprosthetic infection remains a clinical challenge that may lead to revision surgeries, increased spending, disability, and mortality. The cost for treating hip and knee total joint infections is anticipated to be $1.62 billion by 2020. There is a need for implant surface modifications that simultaneously resist bacterial biofilm formation and adhesion, while promoting periprosthetic bone formation and osseointegration.

In vitro research has shown that nanotextured titanium promotes osteoblast differentiation, and upregulates metabolic markers of osteoblast activity and osteoblast proliferation. In vivo rat studies confirmed increased bone-implant contact area, enhanced de novo bone formation on and adjacent to the implant, and higher pull-out forces compared to non-textured titanium. The authors have advanced a benign electrochemical anodization process based on ammonium fluoride that creates a nanotube surface in as little as 10 minutes (Fig. 1), which can also integrate antibacterial nanosilver (Fig. 2).

The work reported here summarizes in vitro post-inoculation and in vivo post-implantation studies, showing inherent inhibition of methicillin-resistant Staphylococcus aureus (MRSA) by titanium surfaces with nanotubes (TiNT), nanotubes with nanosilver (TiNT+Ag), plain (Ti), and thermal plasma sprayed (TPS) titanium. Ti6Al4V was the base material for all surfaces. In vitro studies evaluated Ti, TPS, four TiNT groups with varying nanotube diameters (60nm, 80nm, 110nm, 150nm), and TiNT+Ag. After seeding with MRSA (105, 106, and 108 CFU/mL), the 110nm diameter nanotubes showed MRSA inhibition up to three-orders of magnitude lower than the Ti and TPS surfaces at 2, 6, and 48 hours.

Following on the in vitro results, New Zealand White rabbits underwent a bilateral implantation of intramedullary tibial implants of the four material groups (4 mm outside diameter; 110nm NT diameter on TiNT and TiNT+Ag implants). One intramedullary canal was inoculated with clinically-derived MRSA (105 CFU in broth) at the time of implantation; one canal had only culture media introduced (control). At a 2-week endpoint, limbs were harvested for analysis, including implant sonication with sonicant bacterial cultured, histology, and microcomputed chromatography. In the sonicant analysis cohort, TPS showed the lowest average MRSA count, while TiNT and TiNT+Ag were the highest. There was one sample each of TPS, TiNT and TiNT+Ag that showed no MRSA. After an additional 24-hour implant incubation, the TiNT and TiNT+Ag samples had no bacteria, but the TPS grew bacteria; therefore, the authors hypothesize that MRSA more readily releases from the TiNT and TiNT+Ag implants during sonication, indicating weaker biofilm adhesion and development. Histologic analysis is currently underway. In a therapeutic experiment, rabbits underwent bilateral implantation, followed by 1 week of infection development, and then 1 week of vancomycin treatment. At the endpoint, implants were sonicated and bacteria was quantified from the sonicant. TiNT showed viable MRSA at only 30% that of TPS-coated levels, while TiNT+Ag implants showed viable MRSA at only 5% that of TPS-coated levels (Fig. 3). These early results indicate that the TiNT and TiNT+Ag surfaces have some inherent antibacterial activity against MRSA, which may increase the efficacy of systemic antibiotic treatments in the setting of periprosthetic joint infections.


T. Ogawa W. Ando H. Yasui Y. Hashimoto T. Koyama T. Tsuda K. Ohzono

Introduction

The anatomic abnormalities are observed in developmental dysplasia of the hip (DDH) and it is challenging to perform the total hip arthroplasty (THA) for some DDH patients. If acetabular cup was placed at the original acetabular position in patients with high hip dislocation, it may be difficult to perform reduction of hip prosthesis because of soft tissue contracture. The procedures resolving this problem were to use femoral shortening osteotomy, or to place the acetabular cup at a higher cup position than the original hip center. Femoral shortening osteotomy has some concerns about its complicated procedure, time consuming, and risk of non-union. Conversely, implantation of the acetabular cup at the higher cup position may eliminate these shortcomings and this procedure is considered to be preferred if possible. However, the criteria of cases without femoral shortening osteotomy are not clear. In this study, we retrospectively analysed the clinical outcomes of patients performed THAs for high hip dislocation, and clarified the adaptation of THA with or without femoral shortening osteotomy.

Methods

We included a total of 65 hip joints from 57 patients who underwent primary THA using Modulus stem for high hip dislocation from November 2007 to December 2015 at our institution. The mean follow up period was 5.2 years (2 – 10 years). The mean age at surgery was 65.4 years (Table 1). Thirty seven hips were classified as Crowe III, and twenty eight hips as Crowe IV based on Crowe classification.

We classified patients into two groups based on the use of femoral osteotomy. Then, we compared the surgical time, blood loss, Japanese Orthopaedic Association (JOA) Score as clinical outcomes, preoperative position of the greater trochanter, the cup position, and complications between two groups. The position of the greater trochanter was measured the height of the tip of greater trochanter from the inter teardrop line. The cup center position was assessed by measuring the distance between the cup center and ipsilateral tear drop. Receiver operating characteristic (ROC) curves were plotted for deciding the cut-off value for the height of the greater trochanter. The cut-off value presented the maximum sensitivity and specificity was determined.


K. Athwal V. Chan C. Halewood A. Amis

Introduction

Pre-clinical assessment of total knee replacements (TKR) can provide useful information about the constraint provided by an implant, and therefore help the surgeon decide the most appropriate configurations. For example, increasing the posterior tibial slope is believed to delay impingement in deep flexion and thus increase the maximal flexion angle of the knee, however it is unclear what effect this has on anterior-posterior (AP) constraint.

The current ASTM standard (F1223) for determining constraint gives little guidance on important factors such as medial- lateral (M:L) loading distribution, flexion angle or coupled secondary motions. Therefore, the aim of the study was to assess the sensitivity of the ASTM standard to these variations, and investigate how increasing the posterior tibial slope affects TKR constraint.

Methods

Using a six degree of freedom testing rig, a cruciate-retaining TKR (Legion; Smith & Nephew) was tested for AP translational constraint. In both anterior and posterior directions, the tibial component was displaced until a ‘dislocation limit’ was reached (fig. 1), the point at which the force-displacement graph started to plateau (fig. 2). Compressive joint loads from 710 to 2000 N, and a range of medial-lateral (M:L) load distributions, from 70:30% to 30:70% M:L, were applied at different flexion angles with secondary motions unconstrained. The posterior slope of the tibial component was varied at 0°, 3°, 6° and 9°.


L. Schroeder V. Neginhal W. B. Kurtz

Background

In this study, we assessed implant survivorship, patient satisfaction, and patient-reported functional outcomes at two years for patients implanted with a customized, posterior stabilized knee replacement system.

Methods

Ninety-three patients (100 knees) with the customized PS TKR were enrolled at two centers. Patients’ length of hospitalization and preoperative pain intensity were assessed. At a single time point follow-up, we assessed patient reported outcomes utilizing the KOOS Jr., satisfaction rates, implant survivorship, patients’ perception of their knee and their overall preference between the two knees, if they had their contralateral knee replaced with an off-the-shelf (OTS) implant.


Z. Luo Z. Zhou F. Pei

Object

Although single-radius designs have theoretical advantages in some aspects, there has been a paucity of evaluation studies. The purpose of this study was to compare 10-year clinical, radiological, survivorship outcomes of single radius and multi radius posterior stabilized prosthesis in total knee arthroplasty(TKA) with Rheumatoid Arthritis (RA).

Method

In this retrospective observational study, we reviewed 240 patients (240 knees) with RA who underwent TKA between Oct 2005 and Dec 2007: SR group (120 patients, 120 knees, Stryker Scorpio NRG) and MR group (120 patients, 120 knees, Depuy sigma RP). A 1 : 1 matched case control study was conducted in two groups which were similar in terms of age, gender, BMI, ASA classification and operation team. Mean follow-up periods were 10.73±1.13 (range: 8–13) years and 10.82±1.09 (range: 7–13) years.


M. Dharia S. Mani

INTRODUCTION

Finite element analysis (FEA) is widely used to study micromotion between the glenoid baseplate and bone, as a pre-clinical indicator for clinical stability in reverse total shoulder arthroplasty (rTSA). Various key parameters such as the number, length, and angle of screws have been shown to influence micromotion [1]. This study explores the influence of screw preloads, an insufficiently studied parameter. Specifically, two rTSA configurations with 18mm and 48mm peripheral screws (PS) were analyzed without screw preloads, followed by analysis of the 48mm PS configuration with an experimentally measured screw preload.

METHODS

FEA models were created to simulate a fixation experiment inspired by ASTM F2028-14. The rTSA configurations used here have a superior and an inferior PS. The assemblies were virtually implanted into a synthetic bone block as per surgical technique. Sliding contacts were defined to model the interface between screw threads-bone, and between baseplate-bone.

To determine the screw preload experimentally, the 48mm screw (n=5) was inserted through a hole in a metal plate, which rested on top of a Futek washer load cell, placed on top of the foam block with a predrilled pilot hole (Figure 1). The screw was inserted using a torque driver until the average human factors torque for the screw driver handle was reached. The resulting axial compressive load due to screw insertion was measured by the washer load cell.

Two step analyses were performed using Ansys version 17.2 for 18mm and 48mm PS, where 756N axial and shear loads were applied sequentially. The model with the 48mm PS was then analyzed in a four step analysis; preload inferior and superior screws, followed by applying the axial and shear loads (Figure 2). Peak overall micromotion including tangential and normal components at the baseplate-bone interface was compared for all three models.


C. Harman I. Afzal D. Shardlow M. Mullins J. Hull F. Kashif R. Field

INTRODUCTION

Historically, the clinical performance of novel implants was usually reported by designer surgeons who were the first to acquire clinical data. Regional and national registries now provide rapid access to survival data on new implants and drive ODEP ratings. To assess implant performance, clinical and radiological data is required in addition to implant survival. Prospective, multi-surgeon, multi-centre assessments have been advocated as the most meaningful. We report the preliminary results of such a study for the MiniHip™femoral component and Trinity™ acetabular component (Corin Ltd, UK).

METHODS

As part of a non-designer, multi-surgeon, multi-centre prospective surveillance study to assess the MiniHip™stem and Trinity™ cup, 535 operations on 490 patients were undertaken. At surgery, the average age and BMI of the study group was 58.2 years (range 21 to 76 years) and 27.9 (range 16.3 to 43.4) respectively. Clinical (Harris Hip Score, HHS) and radiological review have been obtained at 6 months, 3 and 5 years. Postal Oxford Hip Score (OHS) and EuroQol- 5D (EQ5D) score have been obtained at 6 months and annually thereafter. To date, 23 study subjects have withdrawn or lost contact, 11 have died, and 9 have undergone revision surgery. By the end of March 2018, 6 month, 1, 2, 3, 4, and 5 year data had been obtained for 511, 445, 427, 376, 296 and 198 subjects respectively.


M. Dharia D. Wentz K. Mimnaugh

INTRODUCTION

Tibiofemoral contact at the base of the articular surface spine in posterior-stabilized total knee arthroplasty (TKA) implants can lead to spine fracture [1]. Revision TKA implants also have an articular surface spine to provide sufficient constraint when soft tissues are compromised. While some revision TKA designs have metal reinforcement in the articular surface spine, others rely solely on a polyethylene spine. This study used finite element analysis (FEA) to study the effect of metal reinforcement on stresses in the spine when subjected to posteriorly directed loading.

METHODS

Two clinically successful Zimmer Biomet revision TKA designs were selected; NexGen LCCK with metal reinforcement and all-poly Vanguard SSK. The largest sizes were selected. FEA models consisted of the polyethylene articular surface and a CoCr femoral component; LCCK also included a CoCr metal reinforcement in the spine. A 7° and 0° tibial slope, as well as 3° and 0.7° femoral hyperextension, were used for the LCCK and SSK, respectively. A posteriorly directed load was applied to the spine through the femoral component (Figure 1). The base of the articular surface was constrained. The articular surfaces for both designs are made from different polyethylene materials. However, for the purpose of this study, to isolate the effect of material differences on stresses, both were modeled using conventional GUR1050 nonlinear polyethylene material properties. Femoral component and metal reinforcement were modeled using linear elastic CoCr properties. Additionally, the LCCK was reanalyzed by replacing the metal reinforcement component with polyethylene material, in order to isolate the effect of metal reinforcement for an otherwise equivalent design. Frictional sliding contact was modeled between the spine and femoral/metal reinforcement components. Nonlinear static analyses were performed using Ansys version 17 software and peak von mises stresses in the spine were compared.


C. Gardner A. Traynor N. A. Karbanee D. Clarke C. Hardaker

Introduction

Hip arthroplasty is considered common to patients aged 65 and over however, both Jennings, et al., (2012) and Bergmann (2016) found THA patients are substantially younger with more patients expecting to return to preoperative activity levels. With heavier, younger, and often more active patients, devices must be able to support a more demanding loading-regime to meet patient expectations. McClung (2000) demonstrated that obese patients can display lower wear-rates with UHMWPE bearing resulting from post-operative, self-induced reduced ambulatory movement, thus questioning if obese kinematics and loading are indeed the worst-case.

Current loading patterns used to test hip implants are governed by ISO 14242-1 (2014). This study aimed to characterize a heavy and active population (referred to as HA) and investigate how the gait profile may differ to the current ISO profile.

Method

A comprehensive anthropometric data set of 4082 men (Gordon, CC., et.al., 2014) was used to characterize a HA population. Obese and HA participants were classed as BMI ≥30 however HA participants were identified by applying anthropometric ratios indicative of lower body fat, namely “waist to height” (i.e. WHtR <0.6) and “waist to hip” (i.e. WHpR <0.9).


C. Roche J. Yegres N. Stroud J. VanDeven T. Wright P. H. Flurin J. Zuckerman

Introduction

Aseptic glenoid loosening is a common failure mode of reverse shoulder arthroplasty (rTSA). Achieving initial glenoid fixation can be a challenge for the orthopedic surgeon since rTSA is commonly used in elderly osteoporotic patients and is increasingly used in scapula with significant boney defects. Multiple rTSA baseplate designs are available in the marketplace, these prostheses offer between 2 and 6 screw options, with each screw hole accepting a locking and/or compression screw of varying lengths (between 15 to 50mm). Despite these multiple implant offerings, little guidance exists regarding the minimal screw length and/or minimum screw number necessary to achieve fixation. To this end, this study analyzes the effect of multiple screw lengths and multiple screw numbers on rTSA initial glenoid fixation when tested in a low density (15pcf) polyurethane bone substitute model.

Methods

This rTSA glenoid loosening test was conducted according to ASTM F 2028–17; we quantified glenoid fixation of a 38mm reverse shoulder (Equinoxe, Exactech, Inc) in a 15 pcf low density polyurethane block (Pacific Research, Inc) before and after cyclic testing of 750N for 10k cycles. To evaluate the effect of both screw fixation and screw number, glenoid baseplates were constructed using 2 and 4, 4.5×18mm diameter poly-axial locking compression screws (both n = 5) and 2 and 4, 4.5×46mm diameter poly-axial locking compression screws (both n = 5). A two-tailed unpaired student's t-test (p < 0.05) compared prosthesis displacements to evaluate each screw length (18 vs 46mm) and each screw number (2 vs 4).


S. Van Onsem M. Verstraete D. Verrewaere C. Van Der Straeten J. Victor

Background

Under- or oversizing of either component of a total knee implant can lead to early component loosening, instability, soft tissue irritation or overstuffing of joint gaps. All of these complications may cause postoperative persistent pain or stiffness. While survival of primary TKA's is excellent, recent studies show that patient satisfaction is worse. Up to 20% of the patients are not satisfied with the outcome as and residual pain is still a frequent occurrence.

The goal of this study was therefore to evaluate if the sizing of the femoral component, as measured on a 3D-reconstructed projection, is related to patient reported outcome measures.

From our prospectively collected TKA outcome database, all patients with a preoperative CT and a postoperative X-ray of their operated knee were included in this study. Of these 43 patients, 26 (60,5%) were women and 17 (39,5%) were men. The mean age (+/−SD) was 74,6 +/− 9 years.

Methods

CT scans were acquired. All patients underwent TKA surgery in a single institution by one surgical team using the same bi- cruciate substituting total knee (Journey II BCS, Smith&Nephew, Memphis, USA). Using a recently released X-ray module in Mimics (Materialise NV, Leuven, Belgium), this module allows to align the post-operative bi-planar x-rays with the 3D- reconstructed pre-operative distal femur and to determine the 3D position of the bone and implant models using the CAD- file of the implant. This new technique was validated at our department and was found to have a sub-degree, sub-millimeter accuracy. Eleven zones of interest were defined. On the medial and the lateral condyle, the extension, mid-flexion and deep flexion facet were determined. Corresponding trochlear zones were defined and two zones were defined to evaluate the mediolateral width. In order to compare different sizes, elastic deforming mesh matching algorithms were implemented to transfer the selected surfaces from one implant to another. The orthogonal distances from the implant to the nearest bone were calculated. Positive values represent a protruding (oversized) femoral component, negative values an undersized femoral component. The figure shows the marked zones on the femoral implant. The KOOS subscores and KSS Satisfaction subscore were evaluated.


K. Goswami M. Tarabichi T. Tan N. Shohat A. Alvand J. Parvizi

Introduction

Despite recent advances in the diagnosis of periprosthetic joint infection(PJI), identifying the infecting organism continues to be a challenge, with up to a third of PJIs reported to have negative cultures. Current molecular techniques have thus far been unable to replace culture as the gold standard for isolation of the infecting pathogen. Next- generation sequencing(NGS) is a well-established technique for comprehensively sequencing the entire pathogen DNA in a given sample and has recently gained much attention in many fields of medicine. Our aim was to evaluate the ability of NGS in identifying the causative organism(s) in patients with PJI.

Methods

After obtaining Institutional Review Board approval and informed consent for all study participants, samples were prospectively collected from 148 revision total joint arthroplasty procedures (83 knees, 65 hips). Synovial fluid, deep tissue and swabs were obtained at the time of surgery and shipped to the laboratory for NGS analysis (MicroGenDx). Deep tissue specimens were also sent to the institutional laboratory(Thomas Jefferson University Hospital) for culture. PJI was diagnosed using the Musculoskeletal Infection Society(MSIS) definition of PJI. Statistical analysis was performed using SPSS software.


S. Van Onsem M. Verstraete C. Van Der Straeten J. Victor

Background

Kinematic patterns in total knee arthroplasty (TKA) can vary considerably from the native knee. No study has shown a relation between a given kinematic pattern and patient satisfaction yet.

Questions

The purpose of this study was to test whether the kinematical pattern, and more specifically the anteroposterior translation during (1) open kinetic chain flexion-extension, (2) closed kinetic chain chair rising and (3) squatting, is related to the level of patient satisfaction after TKA.


K. Goswami J. E. Cho J. Manrique T. Tan C. Higuera C. Della Valle J. Parvizi

Introduction

The use of irrigation solution during surgical procedures is a common and effective practice in reduction of bioburden and the risk of subsequent infection. The optimal irrigation solution to accomplish this feat remains unknown. Many surgeons commonly add topical antibiotics to irrigation solutions assuming this has topical effect and eliminates bacteria. The latter reasoning has never been proven. In fact a few prior studies suggest addition of antibiotics to irrigation solution confers no added benefit. Furthermore, this practice adds to cost, has the potential for anaphylactic reactions, and may also contribute to the emergence of antimicrobial resistance. We therefore sought to compare the antimicrobial efficacy and cytotoxicity of irrigation solution containing polymyxin-bacitracin versus other commonly used irrigation solutions.

Methods

Using two in vitro breakpoint assays of Staphylococcus aureus (ATCC#25923) and Escherichia coli (ATCC#25922), we examined the efficacy of a panel of irrigation solutions containing topical antibiotics (500,000U/L Polymyxin-Bacitracin 50,000U/L; Vancomycin 1g/L; Gentamicin 80mg/L), as well as commonly used irrigation solutions (Normal saline 0.9%; Povidone-iodine 0.3%; Chlorhexidine 0.05%; Castile soap 0.45%; and Sodium hypochlorite 0.125%) following 1 minute and 3 minutes of exposure. Surviving bacteria were counted in triplicate experiments. Failure to eradicate all bacteria was considered to be “not effective” for that respective solution and exposure time.

Cytotoxicity analysis in human fibroblast, osteoblast, and chrondrocyte cells exposed to each of the respective irrigation solutions was performed by visualization of cell structure, lactate dehydrogenase (LDH) activity and evaluation of vital cells. Toxicity was quantified by determination of LDH release (ELISA % absorbance; with higher percentage considered a surrogate for cytotoxicity). Descriptive statistics were used to present means and standard deviation of triplicate experimental runs.


S. Van Onsem E. Van Damme D. Dedecker C. Van Der Straeten I. Sande E. Wefula

Introduction

Today, Uganda has the second highest rate of road accidents in Africa and the world after Ethiopia. According to the World Health Organization's Global Status Report on Road Safety 2013, Uganda is named among countries with alarmingly high road accident rates. If such trend of traffic accidents continues to increase, the health losses from traffic injuries may be ranked as the second to HIV/AIDS by 2020. These road traffic accidents often result in terrible open injuries. Open fractures are complex injuries of bone and soft tissue. They are orthopedic emergencies due to risk of infection secondary to contamination and compromised soft tissues and sometimes vascular supply and associated healing problems. Any wound occurring on the same limb should be suspected as result of open fracture until proven otherwise. The principles of management of open fracture are initial evaluation and exclusion of life threatening injuries, prevention of infection, healing of fracture and restoration of function to injured extremity. Because of the poor hygienic circumstances and the high rate of cross-infection due to the crowded patient-wards, the risk of getting a post-operative infection is relatively high.

Osteoset-T® (Wright Medical) is a medical grade calcium sulfate bone graft substitute which is enhanced for use in infected sites by incorporating 4% tobramycin sulfate. The tobramycin is released locally, allowing therapeutic antibiotic levels at the graft site, while maintaining low systemic antibiotic levels. This local treatment of infection allows new bone formation in the defect site, while decreasing potential systemic effects.

Purpose/aim

Prevention and treatment of postoperative osteomyelitis by introducing alcoholic hand-sanitizers and the use of wound debridement and implantation of a medicated bone graft substitute.


M. Dharia J. Armacost Y. Son

INTRODUCTION

Porous metal bone fillers are frequently used to manage bony defects encountered in revision total knee arthroplasty (rTKA). Compared to structural graft, porous metal bone fillers have shown significantly lower loosening and failure rates potentially due to osseointegration and increased material strength [1]. The strength of porous metal bone fillers used in lower extremities is frequently assessed using compression/shear/torsion test methods, adapted from spine standards. However, these basic methods may lack clinical relevance, and do not provide any insight on the relationship between patient activity and anticipated prosthesis performance. The goal of this study was to evaluate the response of bone fillers under different activities of daily living, in order to define physiologically relevant worst case biomechanics for component evaluation.

METHODS

A bone filler tibial augment is shown in Figure 1. A test construct for tibial augments (half-block each for medial and lateral sides) is shown in Figure 2, along with compatible rTKA components. An additional void in the bone was filled using bone cement. Loading was applied through the tibiofemoral contact patches created on polyethylene tibial insert. Loading was used for two activities of daily living; walking and deep knee bend [2–3]. During walking, the tibiofemoral contact patch on the anterior tibial post gets loaded due to femoral hyperextension with 1.2xbody weight (BW), whereas the medial and lateral condyles get loaded with 3xBW compressive load. For deep knee bend, only the condyles get loaded with 4.34xBW. Compared to walking, 45% higher compressive load magnitude in deep knee bend located further posterior was anticipated to create a larger bending moment and induce higher stress on the half augments. A finite element analysis (FEA) was performed by modeling this test construct with a medium size tibial augment. All components were modeled using linear elastic material properties. All interfaces, including the augment-bone interface (representing full bony ingrowth construct) were modeled using bonded contact. The inferior surface of the bone analogue was constrained. Linear static analyses were performed and peak von mises stress predicted in the tibial augments was compared between activities.


K. Goswami T. Tan M. Tarabichi N. Shohat J. Parvizi

Background

Recent reports demonstrate that Next Generation Sequencing (NGS) facilitates pathogen identification in the context of culture-negative PJI; however the clinical relevance of the polymicrobial genomic signal often generated remains unknown. This study was conceived to explore: (1) the ability of NGS to identify pathogens in culture-negative PJI; and (2) determine whether organisms detected by NGS, as part of a prospective observational study, had any role in later failure of patients undergoing surgical treatment for PJI.

Methods

In this prospective study samples were collected in 238 consecutive patients undergoing revision total hip and knee arthroplasties. Of these 83 patients (34.9%) had PJI, as determined using the Musculoskeletal Infection Society (MSIS) criteria, and of these 20 were culture-negative (CN-PJI). Synovial fluid, deep tissue and swabs were obtained at the time of surgery and sent for NGS and culture/MALDI-TOF. Patients undergoing reimplantation were excluded. Treatment failure was assessed using the previously described Delphi criteria. In cases of re-operation, organisms present were confirmed by culture and MALDI-TOF. Concordance of the infecting pathogen(s) at failure with the NGS analysis at the initial stage CN- PJI procedure was determined.


M. Ta M. LaCour A. Sharma R. Komistek

Currently, hip implant designs are evaluated experimentally using mechanical simulators or cadavers, and total hip arthroplasty (THA) postoperative outcomes are evaluated clinically using long-term follow-up. However, these evaluation techniques can be both costly and time-consuming. Neither can provide an assessment of post-operative results at the onset of implant development. More recently, a forward-solution mathematical model was developed that functions as theoretical joint simulator, providing instant feedback to designers and surgeons alike. This model has been validated by comparing the model predictions with kinematic results from fluoroscopy for both implanted and non-implanted hips and kinetics from a telemetric hip. The model allows surgical technique modifications and implant component placement under in vivo conditions.

The objective of this study was to further expand the capabilities of the model to function as an intraoperative virtual surgical tool (Figure 1). This new module allows the surgeon to simulate surgery, then predict, compare, and optimize postoperative THA outcomes based on component placement, sizing choices, reaming and cutting locations, and surgical methods.

This virtual surgery tool simulates the quadriceps, hamstring, gluteus, iliopsoas, tensor fasciae latae, and an adductor muscle groups, as well as the hip capsular ligament groups. The model can simulate resecting, weakening, loosening, or tightening of soft tissues based on surgical techniques. Additionally, the model can analyze a variety of activities, including gait and deep flexion activities.

Initially, the virtual surgery module offers theoretical surgery tools that allow surgeons to alter surgical alignments, component designs, offsets, as well as reaming and cutting simulations. The virtual model incorporates a built-in CT scan bone database which will assist in determining muscle and ligament attachment sites as well as bony landmarks. The virtual model can be used to assist in the placement of both the femoral component and the acetabular cup (Figure 2).

Moreover, once the surgeon has decided on the placements of the components, they can use the simulation capabilities to run virtual human body maneuvers based on the chosen parameters. The simulations will reveal force, contact stress, and motion predictions of the hip joint (Figure 3). The surgeon can then choose to modify the positions accordingly or proceed with the surgery.

This new virtual surgical tool will allow surgeons to gain a better understanding of possible post-operative outcomes under pre-operative conditions or intra-operatively. Simulations using the virtual surgery model has revealed that improper component placement may lead to non-ideal post-operative function, which has been simulated using the model. Further evaluation is ongoing so that this new module can reveal more information pre-operatively, allowing a surgeon to gain ample information before surgery, especially with difficult and revision cases.


M. Ta M. LaCour A. Sharma R. Komistek

During the preoperative examination, surgeons determine whether a patient, with a degenerative hip, is a candidate for total hip arthroplasty (THA). Although research studies have been conducted to investigate in vivo kinematics of degenerative hips using fluoroscopy, surgeons do not have assessment tools they can use in their practice to further understand patient assessment. Ideally, if a surgeon could have a theoretical tool that efficiently allows for predictive post-operative assessment after virtual surgery and implantation, they would have a better understanding of joint conditions before surgery.

The objectives of this study were (1) to use a validated forward solution hip model to theoretically predict the in vivo kinematics of degenerative hip joints, gaining a better understanding joint conditions leading to THA and (2) compare the predicted kinematic patterns with those derived using fluoroscopy for each subject.

A theoretical model, previously evaluated using THA kinematics and telemetry, was used for this study, incorporating numerous muscles and ligaments, including the quadriceps, hamstring, gluteus, iliopsoas, tensor fasciae latae, an adductor muscle groups, and hip capsular ligaments. Ten subjects having a pre-operative degenerative hip were asked to perform gait while under surveillance using a mobile fluoroscopy unit. The hip joint kinematics for ten subjects were initially assessed using in vivo fluoroscopy, and then compared to the predicted kinematics determined using the model. Further evaluations were then conducted varying implanted component position to assess variability.

The fluoroscopic evaluation revealed that 33% of the degenerative hips experienced abnormal hip kinematics known as “hip separation” where the femoral head slides within the acetabulum, resulting in a decrease in contact area. Interestingly, the mathematical model produced similar kinematic profiles, where the femoral head was sliding within the acetabulum (Figure 1).

During swing phase, it was determined that this femoral head sliding (FHS) is caused by hip capsular laxity resulting in reducing joint tension. At the point of maximum velocity of the foot, the momentum of the lower leg becomes too great for capsule to properly constrain the hip, leading to the femoral component pistoning outwards.

During stance phase, kinematics of degenerative hips were similar to kinematics of a THA subject with mal-positioning of the acetabular cup. Further evaluation revealed that if the cup was placed at a position other than its native, anatomical center, abnormal forces and torques acting within the joint lead to the femoral component sliding within the acetabular cup. It was hypothesized that in degenerative hips, similar to THA, the altered center of rotation is a leading influence of FHS (Figure 2).

The theoretical model has now been validated for subjects having a THA and degenerative subjects. The model has successfully derived kinematic patterns similar to subjects evaluated using fluoroscopy. The results in this study revealed that altering the native joint center is the most influential factor leading to FHS, or more commonly known as hip separation. A new module for the mathematical model is being implemented to simulate virtual surgery so that the surgery can pre- operatively plan and then simulate post-operative results.


C. Meheux K. J. Park T. A. Clyburn

Background/Purpose

Patient-specific design (PSD) total knee arthroplasty (TKA) implants are marketed to restore neutral mechanical axis alignment (MAA) and provide better anatomic fit compared to standard off-the-shelf (OTS) TKA designs. The purpose of this study was to compare the Knee-Society scores, radiographic outcomes, and complications of PSD and OTS implants.

Methods

IRB approved prospective study comparing PSD and OTS by a single surgeon. Implant design change in PSD occurred during the study leading to PSD-1 and PSD-2 subgroups. Demographic, radiographic data including MAA, coronal-tibial angle (CTA), femoro-tibial angle (FTA), tibial-slope (TS) and patella-tilt (PT), and complications were analyzed. Minimum follow-up was 2 year or until revision, and patients completed Knee-Society scores preoperatively, and postoperatively at 3-, 6-, 12-, 24 weeks and final follow up.


G. Micera A. Moroni R. Orsini S. Mosca D. Fabbri F. Sinapi M. T. Miscione F. Acri

Introduction

The aim of this study was to analyze the results of our series of female patients treated with <48 mm MOMHR devices at a minimum follow-up of 5 years, to understand which is the most important aspects affecting the results and to define if the metal ions dosage has to be indicated as a routinely follow-up.

Methods

This is a retrospective clinical study; the cohort included 198 consecutive MOMHR implanted in 181 female patients (17 bilateral procedures). All operations were performed between 2002 and 2011. All operations were performed by the senior surgeon. Indications to MOMHR included primary or secondary osteoarthritis (OA), rheumatoid arthritis and avascular necrosis. Contraindications included poor proximal femoral bone stock (T-score<−2.5sd in BMD of the femoral neck) or severely distorted hip anatomy. All patients were advised to underwent clinical and radiological review with the operating surgeon at 5 weeks, 3, 6 and 12 months postoperatively and then every subsequent 2 years.182 patients answered to our phone calls; 4 patients died (one of them was operated bilaterally) for causes not related to the study, and in 11 cases the phone number was expired. The minimum follow-up was 5.0 years (mean 7.5, maximum 13.2, sd 0.11).


G. Dessinger M. Ta I. Zeller J. Nachtrab A. Sharma R. Komistek

Introduction

Many fluoroscopic studies on total knee arthroplasty (TKA) have identified kinematic variabilities compared to the normal knee, with many subjects experiencing paradoxical motion patterns. The intent of this research study was to investigate the results of customized-individual-made (CIM) and off-the-shelf (OTS) PS and PCR TKA to determine kinematic variabilities and to assess these kinematic patterns with those previously documented for the normal knee.

Methods

In vivo kinematics were assessed for 151 subjects – 44 with CIM-PCR, 75 with OTS-PCR, 14 with CIM-PS, and 18 with OTS-PS TKA – using a mobile fluoroscopic system and then evaluated using a 3D-2D registration technique. This was a multicenter evaluation so the group of implants were implanted by two surgeons and selected based on recruitment criteria. Each subject performed a deep knee bend activity (DKB) while under fluoroscopy. The kinematics assessed for each subject were condyle translation (LAP/MAP) and rotation (axial rotation).


J. Mooney J. Huddleston D. Amanatullah

Computer-assisted orthopaedic surgery (CAOS) improves mechanical alignment and the accuracy of surgical cuts in the context of total knee arthroplasty. A simplified, CAOS enhanced instrumentation system was assessed to determine if the same effects could be achieved through the use of a less intrusive system. Two cohorts of surgeons (experienced and trainees) performed a series of total knee arthroplasty resections in knee models with and without navigation-enhanced instrumentation. The percentage of resections that deviated from the planned cut by more than 2°or 2mm (outliers) was determined by post-resection advanced imaging for six unique outcome metrics. Within each experience level, the use of the CAOS enhanced system significantly reduced the total percentage of outliers as compared to conventional instrumentation (Figure 1). The experienced users improved from 35% to 4% outliers overall (p < .001) and the trainees from 34% to 10% outliers (p < .001). Comparing across experience levels, the experienced surgeons performed significantly better in only a single resection metric with conventional instrumentation (Figure 2A), varus/valgus tibial alignment, with 8.3% outliers compared to the trainee's 63% outliers (p = .004). The use of CAOS enhanced instrumentation eliminated any differences between the two user groups for all measured resections (Figure 2B). Comparing CAOS enhanced to conventional instrumentation specifically between anatomical deformity types revealed that there is significant improvement (p < .05) with the use of enhanced instrumentation for all three deformity types (Figure 3). These results suggest that non-intrusive CAOS enhanced instrumentation is a viable alternative to conventional instrumentation with possible benefits. This trial also demonstrates that additional experience may not correlate to improved surgical accuracy, and outliers may be less a result of individual surgeon ability or specific anatomic deformities, and more so related to limitations of the instrumentation used or other yet unidentified factors.


A. Torres T. Goldberg J. W. Bush M. J. Mahometa

INTRODUCTION

The direct anterior approach (DAA) for total hip arthroplasty has become a popular technique. Proponents of the anterior approach cite advantages such as less muscle damage, lower dislocation risk, faster recovery, and more accurate implant placement for the approach. However, there is a steep, complex learning curve associated with the technique. The present study seeks to define the learning curve based on individual surgical and outcome variables for a high-volume surgeon.

METHODS

300 consecutive patients were retrospectively analyzed. Intraoperative outcomes measured include surgery time and estimated blood loss (EBL). Complications include intraoperative fracture, post-operative fracture, infection, dislocation, leg length discrepancy, loosening, and medical complications such as deep vein thrombosis (DVT) and pulmonary embolism (PE). Segmented regression models were used to elucidate the presence of a learning curve and mastery of the procedure with regard to each individual variable.


T. Goldberg A. Torres J. W. Bush M. J. Mahometa

INTRODUCTION

The Dorr Bone Classification, devised in 1993 is commonly used to categorize bone types prior to hip reconstruction. The purpose of the present study is to quantify the Dorr classification system using 4 morphologic parameters – morphologic cortical index (MCI), canal-flare index (CFI), canal-bone ratio (CBR), and canal-calcar ratio (CCR).

METHODS

816 hips were reviewed. Demographic data reviewed includes age, sex, and laterality. Each hip was reviewed by 2 separate evaluators for Dorr classification. The MCI, CCR, CBR, and CFI were calculated for each hip on anteroposterior radiographs (Fig 1). One-way ANOVA statistical analysis was used to examine if there are mean differences for each measurement. IRB approval was obtained before collection of data.


K. Gustke

Background

Use of a robotic tool to perform surgery introduces a risk of unexpected soft tissue damage due to the lack of tactile feedback for the surgeon. Early experience with robotics in total hip and knee replacement surgery reported having to abort the procedure in 18–34 percent of cases due to inability to complete preoperative planning, hardware and soft tissue issues, registration issues, as well as concerns over actual and potential soft tissue damage. These damages to the soft tissues resulted in significant morbidity to the patient, negating all the desired advantages of precision and reproducibility with robotic assisted surgery. The risk of soft tissue damage can be mitigated by haptic software prohibiting the cutting tip from striking vital soft tissues and by the surgeon making sure there is a clear workspace path for the cutting tool. This robotic total knee system with a semi-active haptic guided technique was approved by the FDA on 8/5/2015 and commercialized in August of 2016. One year clinical results have not been reported to date.

Objective

To review an initial and consecutive series of robotic total knee arthroplasties for safety in regard to avoidance of known or delayed soft tissue injuries and the necessity to abort the robotic assisted procedure and resort to the use of conventional implantation. Report the clinical outcomes with robotic total knee replacement at or beyond one year to demonstrate satisfactory to excellent performance.


K. Blevins J. Danoff R. Goel C. Foltz A. F. Chen W. Hozack

Introduction

The purpose of this study is to compare total and rate of caloric energy expenditure between conventional and robotic-arm assisted total knee arthroplasty (TKA) between a high volume “veteran” surgeon (HV) and a lower volume, less experienced surgeon (LV).

Methods

Two specialized arthroplasty surgeons wore a biometric-enabled shirt and energy expenditure outcomes were measured (total caloric expenditure, kilocalories per minute, heart rate variability, and surgical duration) during 35 conventional (CTKA) and 29 robotic primary total knee arthroplasty (RTKA) procedures.


G. Chimento M. Patterson L. Thomas K. Bland B. Nossaman J. Vitter

Introduction

Regional anesthesia is commonly utilized to minimize postoperative pain, improve function, and allow earlier rehabilitation following Total Knee Arthroplasty (TKA). The adductor canal block (ACB) provides effective analgesia of the anterior knee. However, patients will often experience posterior pain not covered by the ACB requiring supplemental opioid medications. A technique involving infiltration of local anesthetic between the popliteal artery and capsule of knee (IPACK) targets the terminal branches of the sciatic nerve, providing an alternative for controlling posterior knee pain following TKA.

Materials and Methods

IRB approval was obtained, a power analysis was performed, and all patients gave informed consent. Eligible patients were those scheduled for an elective unilateral, primary TKA, who were ≥ 18 years old, English speaking, American Society of Anesthesiologists physical status (ASA PS) classification I-III. Exclusion criteria included contraindication to regional anesthesia or peripheral nerve blocks, allergy to local anesthetics, allergy to nonsteroidal anti-inflammatory drugs (NSAIDs), chronic renal insufficiency with GFR < 60, chronic pain not related to the operative joint, chronic (> 3 month) opioid use, pre-existing peripheral neuropathy involving the operative limb, and body mass index (BMI) ≥ 40 kg/m2.

Patients were randomized into one of two treatment arms: Continuous ACB with IPACK (IPACK Group) block or Continuous ACB with sham subcutaneous saline injection (No IPACK Group). IPACK Group received single injection of 20 mL 0.25% Ropivacaine. Postoperatively, all patients received a standardized multimodal analgesic regimen. The study followed a double-blinded format. Only the anesthesiologist performing the block was aware of randomization status.

Following surgery, a blinded medical assessor recorded cumulative opioid consumption, average and worst pain scores, and gait distance.


J. Vigdorchik L. Steinmetz P. Zhou D. Vasquez-Montes M. T. Kingery N. Stekas N. Frangella C. Varlotta D. Ge Z. Cizmic V. Lafage R. Lafage P. G. Passias T. S. Protopsaltis A. Buckland

Introduction

Hip osteoarthritis (OA) results in reduced hip range of motion and contracture, affecting sitting and standing posture. Spinal pathology such as fusion or deformity may alter the ability to compensate for reduced joint mobility in sitting and standing postures. The effects of postural spinal alignment change between sitting and standing is not well understood.

Methods

A retrospective radiographic review was performed at a single academic institution of patients with sitting and standing full-body radiographs between 2012 and 2017. Patients were excluded if they had transitional lumbosacral anatomy, prior spinal fusion or hip prosthesis. Hip OA severity was graded by the Kellgren-Lawrence grades and divided into two groups: low-grade OA (LOA; grade 0–2) and severe OA (SOA; grade 3–4). Spinopelvic parameters (Pelvic Incidence (PI), Pelvic Tilt (PT), Lumbar Lordosis (LL), and PI-LL), Thoracic Kyphosis (TK; T4-T12), Global spinal alignment (SVA and T1-Pelvic Angle; TPA; T10-L2) as well as proximal femoral shaft angle (PFSA: as measured from the vertical), and hip flexion (difference between change in PT and change in PFSA) were also measured. Changes in sit-stand radiographic parameters were compared between the LOA and SOA groups with unpaired t-test.


A. Buckland Z. Cizmic P. Zhou L. Steinmetz D. Ge C. Varlotta N. Stekas N. Frangella D. Vasquez-Montes V. Lafage R. Lafage P. G. Passias T. S. Protopsaltis J. Vigdorchik

INTRODUCTION

Standing spinal alignment has been the center of focus recently, particularly in the setting of adult spinal deformity. Humans spend approximately half of their waking life in a seated position. While lumbopelvic sagittal alignment has been shown to adapt from standing to sitting posture, segmental vertebral alignment of the entire spine is not yet fully understood, nor are the effects of DEGEN or DEFORMITY. Segmental spinal alignment between sitting and standing, and the effects of degeneration and deformity were analyzed.

METHODS

Segmental spinal alignment and lumbopelvic alignment (pelvic tilt (PT), pelvic incidence (PI), lumbar lordosis (LL), PI-LL, sacral slope) were analyzed. Lumbar spines were classified as NORMAL, DEGEN (at least one level of disc height loss >50%, facet arthropathy, or spondylolisthesis), or DEFORMITY (PI-LL mismatch>10°). Exclusion criteria included lumbar fusion/ankylosis, hip arthroplasty, and transitional lumbosacral anatomy. Independent samples t-tests analyzed lumbopelvic and segmental alignment between sitting and standing within groups. ANOVA assessed these differences between spine pathology groups.


K. Gustke E. Harrison S. Heinrichs

Background

The Bundled Payments for Care Improvement (BPCI) was developed by the US Center for Medicare and Medicaid (CMS) to evaluate a payment and service delivery model to reduce cost but preserve quality. 90 day postoperative expenditures are reconciled against a target price, allowing for a monetary bonus to the provider if savings were achieved. The surgeon is placed in a position to optimize the patients preoperatively to minimize expensive postoperative cardiovascular readmissions in a high risk population. Traditionally, surgeons request that primary care providers medically clear the patient for surgery with or without additional cardiology consultation, without dictating specific testing. Typical screening includes an EKG, occasionally an echocardiogram and nuclear stress test, and rarely a cardiac catheterization. Our participation in the BPCI program for total hip and knee replacement surgeries since 1/1/15 has demonstrated a significant number of patients having readmissions for cardiac events.

Objective

To determine the medical effectiveness and cost savings of instituting a new innovative cardiac screening program (Preventive Cardio-Orthopaedics) for total hip and knee replacement patients in the BPCI program and to compare result to those managed in the more traditional fashion.


J. Giles C. Broden C. Tempelaere F. Rodriguez-Y-Baena

PURPOSE

To validate the efficacy and accuracy of a novel patient specific guide (PSG) and instrumentation system that enables minimally invasive (MI) short stemmed total shoulder arthroplasty (TSA).

MATERIALS AND METHODS

Using Amirthanayagam et al.'s (2017) MI posterior approach reduces incision size and eliminates subscapular transection; however, it precludes glenohumeral dislocation and the use of traditional PSGs and instruments. Therefore, we developed a PSG that guides trans-glenohumeral drilling which simultaneously creates a humeral guide tunnel/working channel and glenoid guide hole by locking the bones together in a pre-operatively planned pose and drilling using a c-shaped drill guide (Figure 1). To implant an Affinis Short TSA system (Mathys GmbH), novel MI instruments were developed (Figure 2) for: humeral head resection, glenoid reaming, glenoid peg hole drilling, impaction of cruciform shaped humeral bone compactors, and impaction of a short humeral stem and ceramic head.

The full MI procedure and instrument system was evaluated in six cadaveric shoulders with osteoarthritis. Accuracy was assessed throughout the procedure: 1) PSG physical registration accuracy, 2) guide hole accuracy, 3) implant placement accuracy. These conditions were assessed using an Optotrak Certus tracking camera (NDI, Waterloo, CA) with comparisons made to the pre-operative plan using a registration process (Besl and McKay, 1992).


O. Boughton K. Uemura K. Tamura M. Takao H. Hamada J. Cobb N. Sugano

Objectives

For patients with Developmental Dysplasia of the Hip (DDH) who progress to needing total joint arthroplasty it is important to understand the morphology of the femur when planning for and undertaking the surgery, as the surgery is often technically more challenging in patients with DDH on both the femoral and acetabular parts of the procedure1. The largest number of male DDH patients with degenerative joint disease previously assessed in a morphological study was 122. In this computed tomography (CT) based morphological study we aimed to assess whether there were any differences in femoral morphology between male and female patients with developmental dysplasia undergoing total hip arthroplasty (THA) in a cohort of 49 male patients, matched to 49 female patients.

Methods

This was a retrospective study of the pre-operative CT scans of all male patients with DDH who underwent THA at two hospitals in Japan between 2006–2017. Propensity score matching was used to match these patients with female patients in our database who had undergone THA during the same period, resulting in 49 male and 49 female patients being matched on age and Crowe classification. The femoral length, anteversion, neck-shaft angle, offset, canal-calcar ratio, canal flare index, lateral centre-edge angle, alpha angle and pelvic incidence were measured for each patient on their pre-operative CT scans.


S. B. Kang C. B. Chang M. J. Chang W. Kim J. Y. Shin D. W. Suh J. B. Oh S. J. Kim S. H. Choi S. J. Kim H. S. Baek

Purpose

We sought to determine whether there was a difference in the posterior condylar offset (PCO), posterior condylar offset ratio (PCOR) following total knee arthroplasty (TKA) with anterior referencing (AR) or posterior referencing (PR) systems. We also assessed whether the PCO and PCOR changes, as well as patient factors were related to range of motion (ROM) in each referencing system. In addition, we examined whether the improvements in clinical outcomes differed between the two referencing systems.

Methods

This retrospective study included 130 consecutive patients (184 knees) with osteoarthritis who underwent primary posterior cruciate ligament (PCL)-substituting fixed-bearing TKA. All patients were categorized into the AR or PR group according to the referencing system used. Radiographic parameters, including PCO and PCOR, were measured using true lateral radiographs. The difference between preoperative and postoperative PCO and PCOR values were calculated. Clinical outcomes including ROM and Western Ontario and McMaster University (WOMAC) scores were evaluated preoperatively and at 2 years after TKA. The PCO, PCOR values, and clinical outcomes were compared between the two groups.

Furthermore, multiple linear regression analysis was performed to determine the factors related to postoperative ROM in each referencing system.


S. B. Kang C. B. Chang M. J. Chang W. Kim J. Y. Shin D. W. Suh J. B. Oh S. J. Kim S. H. Choi S. J. Kim H. S. Baek

Background

Occasionally, patients experience new or increased ankle pain following total knee arthroplasty (TKA). The aims of this study were to determine (1) how the correction of varus malalignment of the lower limb following TKA affected changes in alignment of the ankle and hindfoot, (2) the difference in changes in alignment of the ankle and hindfoot between patients with and without ankle osteoarthritis (OA), and (3) whether the rate of ankle pain and the clinical outcome following TKA differed between the 2 groups.

Methods

We retrospectively reviewed prospectively collected data of 56 patients (99 knees) treated with TKA. Among these cases, concomitant ankle OA was found in 24 ankles. Radiographic parameters of lower-limb, ankle, and hindfoot alignment were measured preoperatively and 2 years postoperatively. In addition, ankle pain and clinical outcome 2 years after TKA were compared between patients with and without ankle OA.


G. Dessinger M. Mahfouz E. ElHak Abdel Fatah J. Johnson R. Komistek

Introduction

At present, orthopaedic surgeons utilize either CT, MRI or X-ray for imaging a joint. Unfortunately, CT and MRI are quite expensive, non weight-bearing and the orthopaedic surgeon does not receive revenue for these procedures. Although x-rays are cheaper, similar to CT scans, patients incur radiation. Also, all three of these imaging modalities are static. More recently, a new ultrasound technology has been developed that will allow a surgeon to image their patients in 3D. The objective of this study is to highlight the new opportunity for orthopaedic surgeons to use 3D ultrasound as alternative to CT, MRI and X-rays.

Methods

The 3D reconstruction process utilizes statistical shape atlases in conjunction with the ultrasound RF data to build the patient anatomy in real-time. The ultrasound RF signals are acquired using a linear transducer. Raw RF data is then extracted across each scan line. The transducer is tracked using a 3D tracking system. The location and orientation for each scan line is calculated using the tracking data and known position of the tracker relative to the signal. For each scan line, a detection algorithm extracts the location on the signal of the bone boundary, if any exists. Throughout the scan process, a 3D point cloud is created for each detected bone signal. Using a statistical bone atlas for each anatomy, the patient specific surface is reconstruction by optimizing the geometry to match the point cloud. Missing regions are interpolated from the bone atlas.

To validate reconstructed models output models are then compared to models generated from 3D imaging, including CT and MRI.


F. Haidar S. Tarabichi A. Osman M. Elkabbani T. Mohamed

Introduction

John Insall described medial release to balance the varus knee; the release he described included releasing the superficial MCL in severe varus cases. However, this release can create instability in the knee. Furthermore, this conventional wisdom does not correct the actual pathology which normally exists at the joint line, and instead it focuses on the distal end of the ligament where there is no pathology.

We have established a new protocol consisting of 5 steps to balance the varus knee without releasing the superficial MCL and we tried this algorithm on a series of 115 patients with varus deformity and compared it to the outcome with a similar group that we have performed earlier using the traditional Insall technique.

Material and method

115 TKR were performed by the same surgeon using Zimmer Persona implant in varus arthritic knees. The deformities ranged from 15 to 35 degrees. First, the bony resection was made using Persona instrumentation as recommended by the manufacturer. The sequential balancing was divided into 5 steps (we will show a short video demonstrating the surgical techniques for each step) as follows:

Step 1: Releasing of deep MCL Step 2: Excising of osteophyte

Step 3: Excising of scarred tissue in the posteromedial corner soft phytes Step 4: Excision of the posteromedial capsule in case of flexion contracture Step 5: Releasing the semi-membranous (in gross deformity)

We used soft tissue tensioner to balance the medial and lateral gaps. When the gaps are balanced at early step, there was no need to carry on the other steps. We used only primary implant and we did not have to use any constrained implant. We have compared this group with a similar group matched for deformity from previous 2 years where the conventional medial release as described by Insall.


J. Nachtrab G. Dessinger M. Khasian M. LaCour A. Sharma R. Komistek

Introduction

Hip osteoarthritis can be debilitating, often leading to pain, poor kinematics and limiting range of motion. While the in vivo kinematics of a total hip arthroplasty (THA) are well documented, there is limited information pertaining to the kinematics of native, non-arthritic (normal) hips and degenerative hips requiring a THA.

The objective of this study is to evaluate and compare the in vivo kinematics of the normal hip with pre-operative, degenerative hips and post-operative THA.

Methods

Twenty subjects, ten having a normal hip and ten having a pre-operative, degenerative hip that were analyzed before surgery and then post-operatively after receiving a THA. Each subject was asked to perform gait while under mobile fluoroscopic surveillance. Normal and pre-operative degenerative subjects underwent a CT scan so that 3D models of their femur and pelvis could be created. Using 3D-to-2D registration techniques, the hip joint kinematics were derived and assessed.

Femoral head and acetabular cup rotational centers were derived using spheres. The centers of these spheres were used to obtain the femoral head sliding distance on the acetabular cup during the activity. The patient-specific reference femoral head values were obtained from the subjects’ CT scans in a non-weight bearing situation.


T. Bitter M. Marra I. Khan T. Marriott E. Lovelady N. Verdonschot D. Janssen

Introduction

Fretting corrosion at the taper interface of modular connections can be studied using Finite Element (FE) analyses. However, the loading conditions in FE studies are often simplified, or based on generic activity patterns. Using musculoskeletal modeling, subject-specific muscle and joint forces can be calculated, which can then be applied to a FE model for wear predictions. The objective of the current study was to investigate the effect of incorporating more detailed activity patterns on fretting simulations of modular connections.

Methods

Using a six-camera motion capture system, synchronized force plates, and 45 optical markers placed on 6 different subjects, data was recorded for three different activities: walking at a comfortable speed, chair rise, and stair climbing.

Musculoskeletal models, using the Twente Lower Extremity Model 2.0 implemented in the AnyBody modeling System™ (AnyBody Technology A/S, Aalborg, Denmark; figure1), were used to determine the hip joint forces. Hip forces for the subject with the lowest and highest peak force, as well as averaged hip forces were then applied to an FE model of a modular taper connection (Biomet Type-1 taper with a Ti6Al4V Magnum +9 mm adaptor; Figure 2). During the FE simulations, the taper geometry was updated iteratively to account for material removal due to wear. The wear depth was calculated based on Archard's Law, using contact pressures, micromotions, and a wear factor, which was determined from accelerated fretting experiments.


A. Mullaji G. Shetty

Aims

The aims of this prospective study were to determine the effect of osteophyte excision on deformity correction and soft- tissue gap balance in varus knees undergoing total knee arthroplasty (TKA).

Patients and Methods

Limb deformity in coronal (varus) and sagittal (flexion) planes, medial and lateral gap distances in maximum knee extension and 90° knee flexion and maximum knee flexion were recorded before and after excision of medial femoral and tibial osteophytes using computer navigation in 164 patients who underwent 221 computer-assisted, cemented, cruciate- substituting TKAs.


A. Mullaji G. Shetty

Aims

The aims of this retrospective study were to determine the incidence of extra-articular deformities (EADs), and determine their effect on postoperative alignment in knees undergoing mobile-bearing, medial unicompartmental knee arthroplasty (UKA).

Patients and Methods

Limb mechanical alignment (hip-knee-ankle angle), coronal bowing of the femoral shaft and proximal tibia vara or medial proximal tibial angle (MPTA) were measured on standing, full-length hip-to-ankle radiographs of 162 patients who underwent 200 mobile-bearing, medial UKAs


Full Access
D. Saravanja G. Roger

Image guided surgery (IGS), or “Navigation,” is now widely used in many areas of surgery including arthroplasty. However, the options for establishing, in real time, the veracity of the navigation information are limited. Manufacturers recommend registering with a “prominent anatomical feature” to confirm accurate navigation is being presented. In their fine print, they warrant the accuracy proximate to the navigation array attached to the body. In multi-level spine surgery where it is most sorely needed, this limits the warrants to the vertebra of reference array attachment. In arthroplasty surgery, the accuracy of the system can be erroneous through technical errors and a delay may occur prior to verification of such innacuracy.

In response to this situation surgeons have taken to using K-wires, FaxMax screws and a variety of other “Fiducial Markers”, but these were not specifically designed for this purpose and in many ways are inadequate for the task of verification of navigation accuracy.

We have developed a fiducial marker that is designed to address these unmet needs. The Precision Screw is clearly visible on imaging modalities and the central registration point is identifiable at any angle of viewing, with accuracy of fractions of a millimeter. It does not interfere with surgery, being low profile and securely fixed to bone. Finally, in use, it is secure in capturing the navigation probe so that the surgeon does not need to focus on keeping the probe located while reviewing the navigation data.

We believe these features make this a useful and worthwhile addition to IGS.


F. Haidar S. Tarabichi A. Osman M. Elkabbani T. Mohamed

Introduction

Most of the algorithm available today to balance varus knee is based on a surgeon's hands-on experience without full understanding of pathological anatomy of varus knee. The high-resolution MRI allows us to recognize the anatomical details of the posteromedial corner and the changes of the soft tissue associated with the osteoarthritis and varus deformity. We have in this study, reviewed 60 cases of severe varus knee scheduled for TKR and compared it to normal MRI and those MRI were evaluated and read by a musculoskeletal radiologist. We have documented clearly the changes that happens in soft tissue, leading to tight medial compartment. We will also show multiple short intra-operative video confirming that MRI findings.

Material & method

We have retrospectively reviewed the MRI on 60 patients with advanced osteoarthritis varus knee. We also reviewed 20 MRI for a normal knee matched for age. We evaluated the posteromedial complex and MCL in sagittal PD-weighted VISTA to check the alignment of the MCL and posteromedial complex and the associate MCL bowing and deformity that could happen in osteoarthritis knee. We have measured the thickness of the posteromedial complex and the posterior medial bowing of the superficial MCL and the involvement of the posterior oblique ligament in those patients. To measure the posterior bowing of the MCL, a line was drawn through the posterior aspect of both menisci and we measured the distance between the posterior edge of MCL to that line in actual image. To measure the thickness of the posteromedial complex, we measured it at two areas in the posterior medial corner posteriorly at the level of the medial meniscus.

Measuring the medial bowing of the MCL was done by a line drawn through the medial edge of the femoral condyle and the tibial condyle at the level of the medial meniscus to the inner aspect of the MCL. The normal distance between the posterior aspects of the MCL to the posterior meniscus line was approximately measured 2 cm. in average.


D. Saravanja G. Roger

Many navigation (Image Guided Surgery or IGS) systems are keyed to safely and accurately placing implants into complex anatomy. In spine surgery such as disc arthroplasty and fusion surgery this can be extremely helpful. Likewise, in joint arthroplasty the accurate placement with respect to the operative plan is widely recognized to be of benefit to long term results.

However, where realignment of anatomy is desired following implant placement, such as in high tibial osteotomy, spinal fusion with correction of deformity, and spinal disc arthroplasty, navigation systems can tell you where you are, but not where you would like to be.

We have developed specific software modification technology, applicable to all current navigation systems that addresses this need for assistance in surgical correction of anatomy to a desired alignment without the requirement for further imaging or irradiation. The benefits of our software allow image free re-referencing of image guided surgery, accommodation of intra-operative changes in anatomy, and intra-operative accountability and adjustment to allow errors of image guidance to be identifiable and correctible, at any stage of image guided surgery.

This software allows accurate pre-operative planning, intra-operative verification and assessment of the operative plan, and actual outcomes of the surgery to be assessed as the surgery is performed. It allows the surgeon to subsequently verify if the operative planning has been adequately achieved, and if not can verify if continued surgery has then achieved the planning goals. This verification and image guidance does not require further imaging during surgery, relying upon the original data set and software enhancements.


F. Haidar S. Tarabichi A. Osman M. Elkabbani

INTRODUCTION

Gross deformity such as severe flexion contraction or severe varus deformity in both knees is better corrected simultaneously to prevent recurrence of flexion contracture and also to have equal leg length which facilitate proper physiotherapy post operatively. However, there is great reluctance in many institute to perform Simultaneous Bilateral Total Knee Replacement (SBTKR) fearing higher complication rate. The purpose of this paper is to show that SBTKR is economical, safe and sometimes is necessary in gross deformity such as bilateral flexion contracture. In this paper we will review the most recent literature about SBTKR which support our argument. Also we will review our cases of over 7500 of SBTKR done at our institution. In this study we will focus on the process that we went through at our institution to upgrade our medical care to enable to do this SBTKR safely. We will share also our post-operative protocol and some hint on the administrative level in order to perform SBTKR.

METHODS

In the last 20 years we performed over 7500 SBTKR, 15,000 implants. We have established at our institution a pre-operative team where this team included internist, physiotherapist, anesthesiologist and other medical sub specialty as recommended by the internist. The patient was pre-oped carefully and the extent of medical examination was determined by the internist and the anesthesiologist. Each patient care was determined preoperatively and also we have utilized special complexity scale that we have developed at our institution to reflect the complexity of the primary total knee replacement 1–5. The ASA and complexity scale is now routinely printed on our OR schedule. If the patient was cleared, SBTKR were carried on. The surgery is done first for the right side and after cementing the assistant will start the left side while the senior surgeon will clean the knee and then assist in the second knee. We have tried different modalities and the safest, less confusing was to first finish the first knee and after cementing the other limb was started by the assistant. The surgeon had only two assistants and one scrub nurse. Increasing the no. of assistant will make things more confusing. So we strongly recommend having only one senior surgeon. Post-operative care was almost identical to that of a single total knee replacement. We documented the complication rate, blood transfusion and unexpected ICU admission etc. in the SBTKR and we compared it to over 1000 cases of single knee replacement done at our institution by the same surgeon. The knee score was also was documented on both sides.


S. B. Kang M. J. Chang C. B. Chang C. Yoon W. Kim J. Y. Shin D. W. Suh J. B. Oh S. J. Kim S. H. Choi S. J. Kim H. S. Baek

Background

Authors sought to determine the degree of lateral condylar hypoplasia of distal femur was related to degree of valgus malalignment of lower extremity in patients who underwent TKA. Authors also examined the relationships between degree of valgus malalignment and degree of femoral anteversion or tibial torsion.

Methods

This retrospective study included 211 patients (422 lower extremities). Alignment of lower extremity was determined using mechanical tibiofemoral angle (mTFA) measured from standing full-limb AP radiography. mTFA was described positive value when it was valgus. Patients were divided into three groups by mTFA; more than 3 degrees of valgus (valgus group, n = 31), between 3 degrees of valgus to 3 degrees of varus (neutral group, n = 78), and more than 3 degrees of varus (varus group, n = 313). Condylar twisting angle (CTA) was used to measure degree of the lateral femoral condylar hypoplasia. CTA was defined as the angle between clinical transepicondylar axis (TEA) and posterior condylar axis (PCA). Femoral anteversion was measured by two methods. One was the angle formed between the line intersecting femoral neck and the PCA (pFeAV). The other was the angle formed between the line intersecting femoral neck and clinical TEA (tFeAV). Tibial torsion was defined as a degree of torsion of distal tibia relative to proximal tibia. It was determined by the angle formed between the line connecting posterior cortices of proximal tibial condyles and the line connecting the most prominent points of lateral and medial malleolus. Positive values represented relative external rotation. Negative values represented relative internal rotation.


P. Ramkumar S. Navarro E. Y. Wang

Background

The advent of value-based conscientiousness and rapid-recovery discharge pathways presents surgeons, hospitals, and payers with the challenge of providing the same total hip arthroplasty episode of care in the safest and most economic fashion for the same fee, despite patient differences. Various predictive analytic techniques have been applied to medical risk models, such as sepsis risk scores, but none have been applied or validated to the elective primary total hip arthroplasty (THA) setting for key payment-based metrics. The objective of this study was to develop and validate a predictive machine learning model using preoperative patient demographics for length of stay (LOS) after primary THA as the first step in identifying a patient-specific payment model (PSPM).

Methods

Using 229,945 patients undergoing primary THA for osteoarthritis from an administrative database between 2009– 16, we created a naïve Bayesian model to forecast LOS after primary THA using a 3:2 split in which 60% of the available patient data “built” the algorithm and the remaining 40% of patients were used for “testing.” This process was iterated five times for algorithm refinement, and model performance was determined using the area under the receiver operating characteristic curve (AUC), percent accuracy, and positive predictive value. LOS was either grouped as 1–5 days or greater than 5 days.


D. Pierre J. Gilbert

Introduction

Fretting crevice-corrosion (tribocorrosion) of metallic biomaterials is a major concern in orthopedic, spinal, dental and cardiovascular devices1. Stainless steel (i.e., 316L SS) is one alloy that sees extensive use in applications where fretting, crevices and corrosion may be present. While fretting-corrosion of this alloy has been somewhat studied, the concept of fretting-initiating crevice corrosion (FICC), where an initial fretting corrosion process leads to ongoing crevice-corrosion without continued fretting, is less understood. This study investigated the susceptibility of 316L SS to FICC and the role of applied potential on the process. The hypothesis is crevice-corrosion can be induced in 316L SS at potentials well below the pitting potential.

Materials and Methods

A pin-on-disk fretting test system similar to that of Swaminathan et al.2 was employed. Disks were ∼35 mm in diameter and the pin area was ∼500 mm. Samples were polished to 600 mm finish, cleaned with ethanol and distilled water. An Ag/AgCl wire as the reference, a carbon counter electrode and phosphate buffered saline (PBS, pH 7.4, Room T) were used for electrochemical testing. Load was controlled with a dead-weight system, monitored with a six-axis load cell (ATI Inc.).

Interfacial motion was captured with a non-contact eddy current sensor (0.5 mm accuracy). Motion and load data acquisition was performed with Labview (National Instruments).

Samples were loaded to ∼2 N. The potential per tests was increased from −250 to 250 mV (50 mV increments) with new locations and pins used in each repeat (n=3). Testing incorporated a 1 min rest before fretting (5 min, 1.25 Hz, 60 mm displacement saw tooth pattern). Fretting ceased and the load was held while currents were captured for another 5 min to assess ongoing crevice corrosion.


H. Watanabe T. Majima R. Tsunoda Y. Oshima T. Uematsu S. Takai

Introduction

The hip hemiarthroplasty in posterior approach is a common surgical procedure at the femoral neck fractures in the elderly patients. However, the postoperative hip precautions to avoid the risk of dislocations are impeditive for early recovery after surgery. We used MIS posterior approach lately known as conjoined tendon preserving posterior (CPP) approach, considering its enhancement of joint stability, and examined the intraoperative and postoperative complications, retrospectively.

Methods

We performed hip hemiarthroplasty using CPP approach in 30 patients, and hip hemiarthroplasty using conventional posterior approach in 30 patients, and both group using lateral position with the conventional posterior skin incision. The conjoined tendon (periformis, obturator internus, and superior/inferior gemellus tendon) was preserved and the obturator externus tendon was incised in CPP approach without any hip precautions postoperatively. The conjoined tendon was incised in conventional approach using hip abduction pillow postoperatively.


K. Matsuki K. Matsuki H. Sugaya N. Takahashi S. Hoshika M. Tokai Y. Ueda H. Hamada S. Banks

Background

Scapular notching is a complication after reverse shoulder arthroplasty with a high incidence up to 100%. Its clinical relevance remains uncertain; however, some studies have reported that scapular notching is associated with an inferior clinical outcome. There have been no published articles that studied positional relationship between the scapular neck and polyethylene insert in vivo. The purpose of this study was to measure the distance between the scapular neck and polyethylene insert in shoulders with Grammont type reverse shoulder arthroplasty during active external rotation at the side.

Methods

Eighteen shoulders with Grammont type prosthesis (Aequalis Reverse, Tornier) were enrolled in this study. There were 13 males and 5 female, and the mean age at surgery was 74 years (range, 63–91). All shoulders used a glenosphere with 36mm diameter, and retroversion of the humeral implant was 10°in 4 shoulders, 15°in 3 shoulders, and 20°in 11 shoulders. Fluoroscopic images were recorded during active external rotation at the side from maximum internal to external rotation at the mean of 14 months (range, 7–24) after surgery. The patients also underwent CT scans, and three-dimensional glenosphere models with screws and scapula neck models were created from CT images. CT-derived models of the glenosphere and computer-aided design humeral implant models were matched with the silhouette of the implants in the fluoroscopic images using model-image registration techniques (Figure 1). Based on the calculated kinematics of the implants, the closest distance between the scapular neck and polyethylene insert was computed using the scapular model and computer-aided design insert models (Figure 2). The distance was computed at each 5° increment of glenohumeral internal/external rotation, and the data from 20°internal rotation to 40°external rotation were used for analyses. One-way repeated-measures analysis of variance was used to examine the change of the distance during the activity, and the level of significance was set at P < 0.05.


C. Avila A. Taylor S. Collins

INTRODUCTION

Unlike current acetabular cups, this novel ceramic cup has a Ti/HA coating which removes the requirement for assembly into a metal shell which avoiding potential chipping/misalignment and reducing wall thickness [Figure 1]. This study examines the resistance of novel thin-walled, direct to bone fixation ceramic cups to critical impact loads.

METHODS

Samples of the smallest (Ø46mm) and largest (Ø70mm) diameter ReCerfTM acetabular cups and corresponding femoral head implants were implanted into Sawbones foam blocks considered representative of pelvic cancellous bone. Two different positional configurations were tested and were considered worst case and the extremes of surgical compromise; P1 simulates the cup fully supported by the acetabulum with a high inclination angle (70°) and a vertical impaction axis (worst case loading near the cup rim) and. P2 simulates the cup implanted with a lower inclination (55°) but with the superior section unsupported by acetabulum bone [Figure 2]. For each size, three acetabular cups were tested in each position. The impact fixture was positioned within a drop weight rig above a bed of sand and ≈22mm of pork belly representative of soft tissues damping effect and the implant components aligned to achieve the defined impact point on the cup [Figure 2]. Lateral falls were tested on all available samples applying impact energy of 140J [1] and 3m/s impact velocity [2]. After the lateral fall test, each sample was tested under impact conditions equivalent to a frontal car crash considering a peak impact force of 5.7kN occurring 40ms from initial contact (able to produce acetabular fracture)[3].


A. Osman S. Tarabichi F. Haidar

Introduction

Stiffness postTotal Knee Replacement (TKR) is a common, complex and multifactorial problem. Many reports claim that component mal-rotation plays an important role in this problem. Internal mal-rotation of the tibial component is underestimated among surgeons when compared to femoral internal mal-rotation. We believe the internal mal- rotation of thetibial component can negatively affect the full extension of Knee. We performed an in-vivo study of the impact of tibial internal mal-rotation on knee extension in 31 cases.

Method

During TKR, once all bony cuts were completed and flexion/extension gaps balanced, we assessed the degree of knee extension using the trial component in the setting of normaltibial rotation and with varying degrees of internal rotation (13–33°, mean 21.2±4.6°). Intra-operative lateral knee X-ray was done to measure the degree of flexion contracture in both groups. We also compared the degree of flexion contracture between CR and PS spacers.


A. Osman S. Tarabichi F. Haidar

Introduction

Cementless Total Knee Replacement (TKR) was introduced to improve the longevity of implant; but has yet to be widely adopted because of reports of higher earlier failures in some series. The cementless TKR design has evolved recently and we have been using cementless component – both femoral and tibial on our patients. The long follow-up for fully TKR has been scarce in the literature. The purpose of this study isto investigate the minimum of ten years clinical and radiographic result of cementless titanium component and cementless tantalum component in primary TKR.

Material & method

From 2008 to 2010 317 TKR underwent primary total knee with cementless femoral component titanium based (Zimmer Nexgen) and cementless tantalum component monoblock tibial component, The surgery was performed mainly on younger patients - average age was 48 yrs old ranging from 26 yrs old to 62 yrs old. All surgeries were performed by single surgeon. All patients were followed clinically and radiographically for a minimum of 8 yrs. Mean 7.8 years and range from 7 to 9 years. The underlying diagnosis for majority of the cases were degenerative arthritis in 97 of the cases and rheumatoid arthritis on the 3%.


D. Wang A. Amis

Background

Medical advances and an ageing population mean that more people than ever rely on artificial joints. In the past years, shoulder joint replacement has developed rapidly and the numbers of shoulder prostheses implanted increased dramatically. Wear is one of the main contributors to the failure of shoulder implants. It is therefore important to measure the wear properties of the articulating surfaces within the joint in vitro. Investigation of wear characteristics through a comprehensive range of motion using a sophisticated shoulder simulator would reveal the durability of the material, the performance of component design and the safety analyses of prostheses. The purpose of the work was to develop and validate a multi-station shoulder simulator, which could accurately simulate physiological gleno-humeral forces and displacements during activities of daily living.

Materials and Methods

Imperial shoulder simulator was designed with six articulating stations and one loaded soak control station for anatomical shoulder system wear simulation. It gives an adduction-abduction (AA) range of-15° to 55°, flexion-extension (FE) range of −90° to 90° and internal external rotation (IER) range of 15° to −90°. The rotations are applied simultaneously to the humeral implants by using stepper motors with integral position encoders. Axial and shear loadings to each glenoid implant were applied using pneumatic cylinders. Force controlled translations were recorded using load cells and LVDTs, and a data acquisition system. Pneumatic cylinders were also installed to work to counterbalance weights during the motion of adduction-abduction. All bearing pairs are within isolated and sealed test chambers to prevent loss of fluid through evaporation, and cross contamination of third body wear (as recommended in F1714-96). The simulator is controlled by LabVIEW program allowing to reproduce shoulder activities of daily living.


J. Vigdorchik Z. Cizmic D. Novikov P. A. Meere R. Schwarzkopf A. Buckland

Introduction

A comprehensive understanding of pelvic orientation prior to total hip arthroplasty is necessary to allow proper cup positioning and mitigate the risks of complications associated with component malpositioning. Measurements using anteroposterior (AP) radiographs have been described as effective means of accurately predicting pelvic orientation. The purpose of our study was to describe the inter- and intra-observer reliability and predictive accuracy of predicting pelvic tilt using AP radiographs.

Methods

Five fellowship-trained orthopaedic surgeons independently analyzed pelvic tilt, within 10 degrees, for 50 different AP pelvis radiographs. All surgeons were blinded to patient information, diagnosis, and correct measurements prior to analysis. Responses were then compared to correct measurements using sitting-standing AP and lateral stereoradiographs.


M. Saffarini M. Valoroso G. La Barbera C. Toanen G. Hannink L. Nover D. Dejour

Background

The goal of patellofemoral arthroplasty (PFA) is to replace damaged cartilage, and to correct underlying deformities, to reduce pain and prevent maltracking. We aimed to determine how PFA modifies patellar height, tilt, and tibial tuberosity to trochlear groove (TT-TG) distance. The hypothesis was that PFA would correct trochlear dysplasia or extensor mechanism malalignment.

Methods

The authors prospectively studied a series of 16 patients (13 women and 3 men) aged 64.9 ± 16.3 years (range, 41 to 86) that received PFA. All knees were assessed pre-operatively and six months post-operatively using frontal, lateral, and ‘skyline’ x-rays, and CT scans to calculate patellar tilt, patellar height and tibial tuberosity–trochlear groove (TT-TG) distance.


J. Wahrburg O. Gieseler H. Roth

Total hip replacement procedures are among the most frequent surgical interventions in all industrialized countries. Although it is a routine operationliterature reports that important parameters regarding for example cup orientation and leg length discrepancy often turn out to be not satisfying after surgery. This paper presents a novel concept to improve the reproducibility and accuracy for implantation of cup and stem prosthesis at exactly the desired locations. Existing computer- based commercial products either offer software solutions for just pre-operative planning, or imageless navigation systems that are only used during surgery in the operating theatre. The innovation of our approach is based on an integrated computer-assisted solution that combines pre-operative planning and intra-operative navigation to support THR procedures.

The software for pre-operative planning can process both, 3D CT images and standard 2D x-ray images. A custom-built navigation system using optical 3D localizing technology has been developed to transfer planning results to the OR. The main objective of our approach is to implant the artificial joint in a way to restore the natural anatomy of the joint before surgery as close as possible, or with exactly planned modifications. In particular, cup inclination, cumulative anteversion of cup and stem, CCD angle and lateral offset, centre of rotation, leg length discrepancy, and joint range of motion are considered. It is not necessary to determine numerical values for all of these parameters because our approach uses a unique procedure to record the natural anatomical situation by combining pre-operative planning and intra-operative navigation, and subsequently supports implantation of the prosthesis components by surgical navigation in order to restore this situation.

In case planar 2D x-ray images are used for pre-operative planning accurate scaling of these images is a prerequisite for exact determination of relevant parameters. The patient-specific scaling factor depends on the distance of the hip joint rotation centre from the x-ray detector or film. We have designed a low-cost localization system to be mounted close to the x-ray apparatus. It localizes the 3D position of the rotation centre by small motions of the leg and eliminates uncertainties of conventional methods that are caused by improper positioning of a calibration body.

Easy and robust setup and application have been key objectives for the development of our custom-built navigation system. Acquisition of intraoperative parameters for example includes the determination of the acetabular centre axis by localizing selected landmarks at the acetabular rim. Intra-operative parameters are combined with pre-operative parameters without needing sophisticated matching procedures with the pre-operative images.

A preliminary surgical workflow that will be detailed in the conference presentation has been designed for evaluation of the concept using sawbones models. Based on the promising results of our laboratory tests we have started to prepare first clinical experiments in close cooperation with surgeons.


S. Kreuzer J. Pierrepont C. Stambouzou L. Walter E. Marel M. Solomon A. Shimmin S. McMahon J. Bare

Introduction

Appropriate femoral stem anteversion is an important factor in maintaining stability and maximizing the performance of the bearing after total hip replacement (THR). The anteversion of the native femoral neck has been shown to have a significant effect on the final anteversion of the stem, particularly with a uncemented femoral component. The aim of this study was to quantify the variation in native femoral neck anteversion in a population of patients requiring total hip replacement.

Methods

Pre-operatively, 1215 patients received CT scans as part of their routine planning for THR. Within the 3D planning, each patient's native femoral neck anteversion, measured in relation to the posterior condyles of the knee, was determined.

Patients were separated into eight groups based upon gender and age. Males and females were divided by those under 55 years of age, those aged 55 to 64, 65 to 74 and those 75 or older.


F. Haidar S. Tarabichi A. Osman M. Elkabbani T. Mohamed

Introduction

Early complication post total knee replacement reported to be higher in obese patient in general. Also the outcome of cruciate retaining and PS knee has been fully discussed before and there was no major difference in the outcomes for all the patients overall regardless of their weight. However, the purpose of this paper is to find out if the CR knee has superiority over PS knee in terms of clinical and functional outcomes and if early complication postTKR such as fracture and instability is more common in PS implant than in CR knee. This is a retrospective study comparing two groups of obese patients. The first using PS implant and the other using CR implant. These two groups were matched for age, body mass and severity of deformity.

Materials & Methods

At our institution we have been using Persona implant which has the option of using PS insert or a CR. The decision to proceed with CR or PS mainly depends on the availability of the implant and also the ability to well balance the knee in patients. In most patients we try to proceed with CR implant. However, the flow of implant sometime sometimes limit us from using CR or the imbalance in the ligament force us to process with PS implant.

We have reviewed a chart of over 200 patients in each group of obese patient they were done within the last three years. All cases had a minimum follow up of 6 months. Those groups were matched for body mass, age and severity of deformity.

After matching the groups we documented Knee Society Score (KSS), Knee Society Function Score (KSFS), blood loss, post – operative pain and complications. All surgeries were performed by the same surgeon.


Z. Cizmic D. Novikov N. Sodhi P. Meere J. Vigdorchik

Introduction

Total joint arthroplasty is regarded as a highly successful procedure. However, patient outcomes and implant longevity require proper alignment and prosthesis position. Computer-assisted total knee arthroplasty (TKA) has been found to improve the accuracy of component positioning and reduce rates of revision, however there remains debate whether it provides improvements in patient reported outcomes (PROs). The purpose of our study was to compare PROs between computer-assisted and conventional TKA.

Methods

A retrospective review of all total knee arthroplasty patients was conducted using a single institution's FORCE database for reporting PROs. Knee Society Score (KSS), procedure satisfaction, physical component summary (PCS), and mental component summary (MCS) were compared between computer-assisted TKA and conventional TKA.


G. H. Westrich K. Swanson A. Cruz C. Kelly A. Levine

INTRODUCTION

Combining novel diverse population-based software with a clinically-demonstrated implant design is redefining total hip arthroplasty. This contemporary stem design utilized a large patient database of high-resolution CT bone scans in order to determine the appropriate femoral head centers and neck lengths to assist in the recreation of natural head offset, designed to restore biomechanics. There are limited studies evaluating how radiographic software utilizing reference template bone can reconstruct patient composition in a model. The purpose of this study was to examine whether the application of a modern analytics system utilizing 3D modeling technology in the development of a primary stem was successful in restoring patient biomechanics, specifically with regards to femoral offset (FO) and leg length discrepancy (LLD).

METHODS

Two hundred fifty six patients in a non-randomized, post-market multicenter study across 7 sites received a primary cementless fit and fill stem. Full anteroposterior pelvis and Lauenstein cross-table lateral x-rays were collected preoperatively and at 6-weeks postoperative. Radiographic parameters including contralateral and operative FO and LLD were measured. Preoperative and postoperative FO and LLD of the operative hip were compared to the normal, native hip. Clinical outcomes including the Harris Hip Score (HHS), Lower Extremity Activity Scale (LEAS), Short Form 12 (SF12), and EuroQol 5D Score (EQ-5D) were collected preoperatively, 6 weeks postoperatively, and at 1 year.


R. Pourzal D. Hall H. Lundberg M. T. Mathew R. Urban J. Jacobs

INTRODUCTION

The lifetime of total hip replacements (THR) is often limited by adverse local tissue reactions to corrosion products generated from modular junctions. Two prominent damage modes are the imprinting of the rougher stem topography into the smoother head taper topography (imprinting) and the occurrence of column-like troughs running parallel to the taper axis (column damage). It was the purpose of this study to identify mechanisms that lead to imprinting and column damage based on a thorough analysis of retrieved implants.

METHODS

776 femoral heads were studied. Heads were visually inspected for imprinting and column damage. Molds were made of each head taper and scanned with an optical coordinate measuring machine. The resulting intensity images were used to visualize damage on the entire surface. In selected cases, implant surfaces were further analyzed by means of scanning electron microscopy (SEM) and white light interferometry. The alloy microstructure was characterized for designs from different manufactures.


S. Kreuzer S. Malanka A. Pourmoghaddam M. Dettmer

Background

Recent studies indicate the benefits of total hip arthroplasty (THA) by using femoral neck-preserving short-stem implants (March et al 1999). These benefits rely on the preservation of native hip structure and improved physiological loading.

However, further investigation is needed to compare the outcome of these implants versus the conventional neck-sacrificing stems particularly assessed by patient-reported outcomes (PROs). In this study, we have investigated the differences in PROs between a neck-sacrificing stem design and neck-preserving short stem design (MiniHip, Corin Inc.). We hypothesized higher PROs outcome in patients who received treatment by using neck-preserving implants.

Methods

In this study, we retrospectively analyzed the pre and post-operative PROs of patients receiving THA treatment by using neck-sacrificing implant (n=90, age 57±7.9 years) and a matched (BMI, age) cohort group of neck-preserving patients (n=105, age 55.16±9.88 years). Hip disability and Osteoarthritis Outcome Scores (HOOS) were using with the follow-up of similar follow up of 412.76 ± 206.98 days (neck sacrificing implant) and 454.63 ± 226.99 days (Neck-Preserving).

Multivariate analysis of variance and Mann-Whitney tests were conducted for statistical analyses. Holm-Bonferroni adjusted for multiple comparisons was used with initial significance level of 0.05.


S. Kreuzer

Introduction

A variety of patient reported outcome (PRO) surveys have been established and validated to evaluate the effectiveness of surgical interventions. The Hip Disability and Osteoarthritis Outcome Score (HOOS) has been validated as one method to evaluate the effectiveness of total hip arthroplasty patients and facilitates the assessment of factors that alter patient outcomes in hip arthroplasty. This retrospective study assesses the effect of psychological post-operative expectations on HOOS in total hip arthroplasty patients. In this pilot study, patient data was collected for 499 patients using the AAOS established Musculoskeletal Outcomes Data Evaluation and Management System (MODEMS) [1] and HOOS surveys.

Method

Patient data was matched using similar preoperative HOOS scores to allow for comparable room for improvement in HOOS score postoperatively. Patients were placed into groups of high performers and low performers. HOOS is based on a 0 to 100 scale, 100 as the best possible outcome. High performers were defined as those with a HOOS growth ratio of 0.8 and above with the best performers reaching a ratio of 1. Low performers were defined as those with the aforementioned ratio below a value of 0.3. Using these defined groups, we were able to compare the summation of patient specific MODEMS scores using univariate regression. The HOOS growth ratio is calculated based on the following:

HOOS growth ratio = (HOOS postop – HOOS preop)/(100-HOOS preop)

Principal component analysis (PCA) was conducted to identify the significant group of factors that could identify changes in the outcome of 41 patients (20 low performers and 21 high performers).


R. Harold E. De Candida Soares Pereira E. Cavalcante M. P. M. Da Silveira Barros S. N. M. De Souza V. Brander S. D. Stulberg

Background

Total hip arthroplasty (THA) is a highly successful procedure, yet access to arthroplasty is limited in many developing nations. In response, organizations around the world have conducted service trips to provide international arthroplasty care to underserved populations. Little outcomes data are currently available related to these trips. We present a 1-year follow up.

Methods

We completed an arthroplasty service trip to Brazil in 2017 where we performed 46 THAs on 38 patients. Patient demographic data, comorbidity profile, complication data, and pre- and postoperative Modified Harris Hip Score (mHHS), PROMIS Short Form Pain (SF-Pain), PROMIS Short Form Physical Function (SF-Function), and HOOS Jr scores were collected. Outcomes were collected postoperatively at 2, 6, and 12 weeks and 1 year. A multivariate regression analysis was performed to identify associations between patient factors and 12-week outcomes.


R. Harold D. Hu L. Woeltjen V. Brander S. D. Stulberg

Background

Total Knee Arthroplasty (TKA) provides patients with significant improvements in quality of life. Subjective patient reported outcome measures (PROMs) are traditionally used to measure preoperative functional status and postoperative outcomes. However, there are limitations to PROMs. In particular, they provide virtually no functional information in the first 3 weeks after surgery, which could be used to guide the patient's recovery. Newly available wearable electronic sensors make it possible to: 1) measure important functional outcomes following TKA; 2) guide the patient's physical therapy (PT); and 3) provide real-time functional and clinical information to the provider.

Compliance with PT after TKA is a challenge. Patients cite time, transportation, and cost as deterrents to PT appointments. However, an intensive PT program is essential in TKA. Surface sensor devices may be able to increase PT compliance by guiding patients through exercises at home. Additionally, these devices can transmit PT progress in real-time to the providers, allowing them to monitor and assist the patient's recovery.

Our study investigates the feasibility of using a surface sensor device (TracPatch™) on patients following TKA. We sought to answer the following questions: 1) Will patients tolerate the device; 2) Will patients comply with device instructions; 3) Will patients be able to use the smart phone application; 4) Will the device collect, transmit, and store data as it was designed? We believe these fundamental questions must be answered as we enter the era of personal sensor-measured functional outcomes.

Methods

20 patients undergoing primary, unilateral TKA were enrolled in this IRB approved study. At the pre-surgical visit, patients were given instructions for the device and smart phone application. Each patient used the device in the week prior to surgery, and data was collected. The device was again applied in the operating room. For 3 weeks post-operatively, the device collected functional data, along with WOMAC, OKS, KSS, PROMIS, and VAS pain scores. A satisfaction survey was collected on the device.


E. Wakelin J. Twiggs E. Moore B. Miles A. Shimmin

Introduction & aims

Patient specific instrumentation (PSI) is a useful tool to execute pre-operatively planned surgical cuts and reduce the number of trays in surgery. Debate currently exists around improved accuracy, efficacy and patient outcomes when using PSI cutting guides compared to conventional instruments. Unicompartmental Knee Arthroplasty (UKA) revision to Total Knee Arthroplasty (TKA) represents a complex scenario in which traditional bone landmarks, and patient specific axes that are routinely utilised for component placement may no longer be easily identifiable with either conventional instruments or navigation. PSI guides are uniquely placed to solve this issue by allowing detailed analysis of the patient morphology outside the operating theatre. Here we present a tibia and femur PSI guide for TKA on patients with UKA.

Method

Patients undergoing pre-operative planning received a full leg pass CT scan. Images are then segmented and landmarked to generate a patient specific model of the knee. The surgical cuts are planned according to surgeon preference. PSI guide models are planned to give the desired cut, then 3D printed and provided along with a bone model in surgery. PSI-bone and PSI-UKA contact areas are modified to fit the patient anatomy and allow safe placement and removal.

The PSI-UKA contact area on the tibia is defined across the UKA tibial tray after the insert has been removed. Further contact is planned on the tibial eminence if it can be accurately segmented in the CT and the anterior superior tibia on the contralateral compartment, see example guide in Figure 1. Contact area on the femur is defined on the superior trochlear groove, native condyle, femur centre and femoral UKA component if it can be accurately segmented in the CT.

Surgery was performed with a target of mechanical alignment using OMNI APEX PS implants (Raynham, MA). The guide was planned such that the OMNI cut block could be placed on the securing pins to translate the cut. Component alignment and resections values were calculated by registering the pre-operative bones and component geometries to post-operative CT images.


M. Verstraete M. Conditt G. Goodchild

Introduction & Aims

Patient recovery after total knee arthroplasty remains highly variable. Despite the growing interest in and implementation of patient reported outcome measures (e.g. Knee Society Score, Oxford Knee Score), the recovery process of the individual patient is poorly monitored. Unfortunately, patient reported outcomes represent a complex interaction of multiple physiological and psychological aspects, they are also limited by the discrete time intervals at which they are administered. The use of wearable sensors presents a potential alternative by continuously monitoring a patient's physical activity. These sensors however present their own challenges. This paper deals with the interpretation of the high frequency time signals acquired when using accelerometer-based wearable sensors.

Method

During a preliminary validation, five healthy subjects were equipped with two wireless inertial measurement units (IMUs). Using adhesive tape, these IMU sensors were attached to the thigh and shank respectively. All subjects performed a series of supervised activities of daily living (ADL) in their everyday environment (1: walking, 2: stair ascent, 3: stair descent, 4: sitting, 5: laying, 6: standing). The supervisor timestamped the performed activities, such that the raw IMU signals could be uniquely linked to the performed activities. Subsequently, the acquired signals were reduced in Python.

Each five second time window was characterized by the minimum, maximum and mean acceleration per sensor node. In addition, the frequency response was analyzed per sensor node as well as the correlation between both sensor nodes. Various machine learning approaches were subsequently implemented to predict the performed activities. Thereby, 60% of the acquired signals were used to train the mathematical models. These models were than used to predict the activity associated with the remaining 40% of the experimentally obtained data.


M. Verstraete M. Conditt D. Lieffort W. Hazin J. Trousdale M. Roche

Introduction and Aims

Sensor technology is seeing increased utility in joint arthroplasty, guiding surgeons in assessing the soft tissue envelope intra-operatively (OrthoSensor, FL, USA). Meanwhile, surgical navigation systems are also transforming, with the recent introduction of inertial measurement unit (IMU) based systems no longer requiring optical trackers and infrared camera systems in the operating room (i.e. OrthAlign, CA, USA). Both approaches have now been combined by embedding an IMU into an intercompartmental load sensor. As a result, the alignment of the tibial varus/valgus cut is now measured concurrently with the mediolateral tibiofemoral contact load magnitudes and locations. The wireless sensor is geometrically identical to the tibial insert trial and is placed on the tibial cutting plane after completing the proximal tibial cut. Subsequently, the knee is moved through a simple calibration maneuver, rotating the tibia around the heel. As a result, the sensor provides a direct assessment of the obtained tibial varus/valgus alignment. This study presents the validation of this measurement.

Method

In an in-vitro setting, sensor-based alignment measurements were repeated for several simulated conditions. First, the tibia was cut in near-neutral alignment as guided by a traditional, marker-based surgical navigation system (Stryker, MI, USA). Subsequently, the sensor was inserted and a minimum of five repeated sensor measurements were performed.

Following these measurements, a 3D printed shim was inserted between the sensor and the tibial cutting plane, introducing an additional 2 or 4 degrees of varus or valgus, with the measurements then being repeated. Again, for each condition, a minimum of five sensor measurements were performed. Following completion of the tests, a computed tomography (CT) scan of the tibia was obtained and reconstructed using open source software (3DSlicer).


L. Lage

We report a rare case of Hip Resurfacing dislocation three years after a bilateral Hip Resurfacing in a very strong patient and show the maneuver to do a closed reduction on a film done at the surgical theatre under general anesthesia.

Hip resurfacing dislocation is a very rare entity described in the literature and more rare after three years. With conventional total hip replacement the dislocation rate is 2–5%. In the international literature the dislocation rate with resurfacing is 0.21%.

We describe a case of a 47 years old male patient who was submitted to a biltateral 54 × 60 mm Hip Resurfacing in November 16 th and 18th, 2011 (two separate days). He had a normal post op and returned to his work after six weeks and recreational activities after four months. Three years later, on November 8th, 2014 he did an extreme movement of hip flexion, adduction and internal rotation when he was gardening and planting a tree seedling suffering a left hip dislocation.

Hopefully we could reduce the dislocated hip in a closed manner in the following morning. Patient went home next day but on that same night had important abominal pain needing to return to hospital when numerous gallbladder stones where found being submitted to a total laparoscopic colecistectomy two days later. It was really a bad luck week.

Metal ions are still normal and patient is symptomless until today having returned to his recreational activities.

We will show in a movie the maneuver to do this closed reduction and hope by showing this maneuver that our colleagues do not have to do an open dislocation in the future in case they face a Hip Resurfacing dislocation.


M. Verstraete M. Conditt T. Wright J. Zuckerman A. Youderian I. Parsons R. Jones J. Decerce G. Goodchild A. Greene C. Roche

Introduction & Aims

Over the last decade, sensor technology has proven its benefits in total knee arthroplasty, allowing the quantitative assessment of tension in the medial and lateral compartment of the tibiofemoral joint through the range of motion (VERASENSE, OrthoSensor Inc, FL, USA). In reversal total shoulder arthroplasty, it is well understood that stability is primarily controlled by the active and passive structures surrounding the articulating surfaces. At current, assessing the tension in these stabilizing structures remains however highly subjective and relies on the surgeons’ feel and experience. In an attempt to quantify this feel and address instability as a dominant cause for revision surgery, this paper introduces an intra-articular load sensor for reverse total shoulder arthroplasty (RTSA).

Method

Using the capacitive load sensing technology embedded in instrumented tibial trays, a wireless, instrumented humeral trial has been developed. The wireless communication enables real-time display of the three-dimensional load vector and load magnitude in the glenohumeral joint during component trialing in RTSA. In an in-vitro setting, this sensor was used in two reverse total shoulder arthroplasties. The resulting load vectors were captured through the range of motion while the joint was artificially tightened by adding shims to the humeral tray.


E. Wakelin J. Twiggs E. Moore B. Miles A. Shimmin D. Liu

Introduction

Knee ligament laxity and soft tissue balance are important pre- and intra- operative balancing factors in total knee arthroplasty (TKA). Laxity can be measured pre-operatively from short-leg radiographs using a stress device to apply a reproducible force to the knee, whereas intra-operative laxity is routinely measured using a navigation system in which a variable surgeon-applied force is applied. The relationship between these two methods and TKA outcome however, has not been investigated. This study aims to determine how intra-operative assessments of laxity relate to functional radiographic assessments performed on pre-operatively. We also investigate how laxity relates to short-term patient-reported outcomes.

Method

A prospective consecutive study of 60 knees was performed. Eight weeks prior to surgery, patients had a CT scan and functional radiographs captured using a Telos stress device (Metax, Germany). This device applies a force to the knee joint while bracing the hip and ankle causing either a varus or valgus response.

3D bone models were segmented from the CT scan and landmarked to generate patient specific axes and alignments. Individual bone models were registered to the 2D stressed X-rays in flexion and extension. Reference axes identified on the registered 3D bone models were used to measure the coronal plane laxity. These laxity ranges were compared with those measured by a navigation system (OMNINAV, OMNI Life Science, MA) used during surgery, and Knee Injury and Osteoarthritis Outcome Scores (KOOS) captured 6 months postoperatively.


M. Verstraete M. Conditt J. Chow A. Gordon J. Geller B. Wade C. Ronning

Introduction

Close to 30% of the surgical causes of readmission within 90 days post-total knee arthroplasty (TKA) and nearly half of those occurring in the first 2 years are caused by instability, arthrofibrosis, and malalignment, all of which may be addressed by improving knee balance. Furthermore, the recently launched Comprehensive Care for Joint Replacement (CJR) initiative mandates that any increase in post-acute care costs through 90-days post-discharge will come directly from the bundle payment paid to providers. Post-discharge costs, including the cost of readmissions for complications are one of the largest drivers of the 90-day cost of care. It is hypothesized that balanced knees post-TKA will lower the true provider costs within the 90-day bundle.

Methods

Cost, outcomes and resource utilization data were collected from three independent surgeons pre- and post- adoption of intraoperative technology developed to provide real-time, quantitative load data within the knee. In addition, data were collected from Medicare claims, hospital records, electronic medical records (EMR), clinical, and specialty databases. The cohorts consisted of 932 patients in the pre-adoption group and 709 patients in the post-adoption group. These 2 groups were compared to the CMS national average data from 291,201 cases. The groups were controlled for age, sex, state, and BMI with no major differences between cohorts. The cost factors considered were the length of hospital stay, physician visits and physical therapy visits in addition to post-operative complications (e.g., manipulation under anesthesia (MUA) and aseptic revision).


A. Gordon G. Golladay T. L. Bradbury I. Fernandez-Madrid V. E. Krebs P. Patel C. Higuera W. Barsoum J. Suarez

Introduction & Aims

Studies have shown that as many as 1 in 5 patients is dissatisfied following total knee replacement (TKA). There has also been a large reported disparity between surgeon and patient perception of clinical “success”. It has long been shown that surgeon opinion of procedural outcomes is inflated when compared with patient-reported outcomes. Additionally, TKA recipients have consistently reported higher pain levels, greater inhibition of function, and lower satisfaction than total hip replacement (THA) recipients. It is imperative that alternative methods be explored to improve TKA patient satisfaction. Therefore, the purpose of this study was to determine whether or not patients with a balanced TKA, as measured using intraoperative sensors, exhibit better clinical outcomes.

Methods

310 patients scheduled for TKA surgery were enrolled in a 6 center, randomized controlled trial, resulting in two patient groups: a sensor-guided TKA group and a surgeon-guided TKA group. Intraoperative load sensors were utilized in all cases, however in one group the surgeon used the feedback to assist in balancing the knee and in the other group the surgeon balanced without load data and the sensor was used to blindly record the joint balance. For this evaluation, the two groups were pooled and categorized as either balanced or unbalanced, as defined by a mediolateral load differential less than 15 lbf (previously described in literature). Clinical outcomes data were collected at 6 weeks, 6 months and 1 year post- operatively, including Knee Society Satisfaction and the Forgotten Joint Score. Using linear mixed models, these outcome measures were compared between the balanced and unbalanced patient groups.


E. Wakelin J. Twiggs B. Fritsch B. Miles D. Liu A. Shimmin

Introduction

Variation in resection thickness of the femur in Total Knee Arthroplasty (TKA) impacts the flexion and extension tightness of the knee. Less well investigated is how variation in patient anatomy drives flexion or extension tightness pre- and post- operatively. Extension and flexion stability of the post TKA knee is a function of the tension in the ligaments which is proportional to the strain. This study sought to investigate how femoral ligament offset relates to post-operative navigation kinematics and how outcomes are affected by component position in relation to ligament attachment sites.

Method

A database of TKA patients operated on by two surgeons from 1-Jan-2014 who had a pre-operative CT scan were assessed. Bone density of the CT scan was used to determine the medial and lateral collateral attachments. Navigation (OmniNav, Raynham, MA) was used in all surgeries, laxity data from the navigation unit was paired to the CT scan. 12-month postoperative Knee Osteoarthritis and Outcome Score (KOOS) score and a postoperative CT scan were taken. Preoperative segmented bones and implants were registered to the postoperative scan to determine change in anatomy.

Epicondylar offsets from the distal and posterior condyles (of the native knee and implanted components), resections, maximal flexion and extension of the knee and coronal plane laxity were assessed. Relationships between these measurements were determined. Surgical technique was a mix of mechanical gap balancing and kinematically aligned knees using Omni (Raynham, MA) Apex implants.


E. Wakelin J. Twiggs J. Roe J. Bare A. Shimmin L. Suzuki B. Miles

Introduction & aims

Resurfacing of the patella is an important part of most TKA operations, usually using an onlay technique. One common practice is to medialise the patellar button and aim to recreate the patellar offset, but most systems do not well control alignment of the patella button. This study aimed to investigate for relationships between placement and outcomes and report on the accuracy of patella placement achieved with the aid of a patella Patient Specific Guide (PSG).

Method

A databse of TKR patients operated on by five surgeons from 1-Jan-2014 who had a pre-operative and post-operative CT scan and 6-month postoperative Knee Osteoarthritis and Outcome (KOOS) scores were assessed. Knees were excluded if the patella was unresurfaced or an inlay technique was used. All knee operations were performed with the Omni Apex implant range and used dome patella buttons. A sample of 40 TKRs had a patella PSG produced consisting of a replication of an inlay barrel shaped to fit flush to the patient's patella bone.

The centre of the quadriceps tendon on the superior pole of the patella bone and the patella tendon on the inferior were landmarked. 3D implant and bone models from the preoperative CT scans were registered to the post-operative CT scan. The flat plane of the implanted patella button was determined and the position of the button relative to the tendon attachments calculated. Coverage of the bone by the button and patellar offset reconstruction were also calculated. The sample of 40 TKRs for whom a patella PSG was produced had their variation in placement assessed relative to the wider population sample. All surgeries were conducted with Omni Apex implants using a domed patella.


R. McKenna D. Marsden-Jones W. Walter

Introduction

Component positioning is of great importance in total hip arthroplasty (THA) and navigation systems can help guide surgeons in the optimal placement of the implants. We report on a newly developed navigation system which employs an inertial measurement unit (IMU) to measure acetabular cup inclination and anteversion.

Aims

To assess the accuracy of the IMU when used for acetabular cup placement and compare this with an established optical navigation system (ONS).


R. McKenna H. Jacobs W. Walter

Background

Accurate implant positioning is of supreme importance in total knee replacement (TKR). The rotational profile of the femoral and tibial components can affect outcomes, and the aim is to achieve coronal conformity with parallelism between the medio-lateral axes of the femur and tibia.

Aims

The aim of this study is to determine the accuracy of implant rotation in total knee replacement.


T. Renders T. Heyse F. Catani P. Sussmann R. De Corte L. Labey

Introduction

Unicompartmental knee arthroplasty (UKA) currently experiences increased popularity. It is usually assumed that UKA shows kinematic features closer to the natural knee than total knee arthroplasty (TKA). Especially in younger patients more natural knee function and faster recovery have helped to increase the popularity of UKA. Another leading reason for the popularity of UKA is the ability to preserve the remaining healthy tissues in the knee, which is not always possible in TKA. Many biomechanical questions remain, however, with respect to this type of replacement.

25% of knees with medial compartment osteoarthritis also have a deficient anterior cruciate ligament [1]. In current clinical practice, medial UKA would be contraindicated in these patients. Our hypothesis is that kinematics after UKA in combination with ACL reconstruction should allow to restore joint function close to the native knee joint. This is clinically relevant, because functional benefits for medial UKA should especially be attractive to the young and active patient.

Materials and Methods

Six fresh frozen full leg cadaver specimens were prepared to be mounted in a kinematic rig (Figure 1) with six degrees of freedom for the knee joint. Three motion patterns were applied: passive flexion-extension, open chain extension, and squatting. These motion patterns were performed in four situations for each specimen: with the native knee; after implantation of a medial UKA (Figure 2); next after cutting the ACL and finally after reconstruction of the ACL. During the loaded motions, quadriceps and hamstrings muscle forces were applied. Infrared cameras continuously recorded the trajectories of marker frames rigidly attached to femur, tibia and patella. Prior computer tomography allowed identification of coordinate frames of the bones and calculations of anatomical rotations and translations. Strains in the collateral ligaments were calculated from insertion site distances.


K. Okazaki H. Mizu-uchi S. Hamai Y. Akasaki Y. Nakashima

Regaining the walking ability is one of the main purposes of total knee arthroplasty (TKA). Improving the activities of daily living is a key of patient satisfaction after TKA. However, some patients do not gain enough improvement of ADL as they preoperatively expected, and thus are not satisfied with the surgery. The purpose of this study is to clarify the relationship between preoperative and postoperative physical functional status and whether preoperative scoring can predict the postoperative walking ability. Consecutive 136 patients who underwent total knee arthroplasty for osteoarthritis were prospectively assessed. The average age (±SD) was 74±7.7 and 74% of the patients was female. Berg Balance Scale (BBS) was assessed preoperatively and one year after the surgery. The time needed for 10m walking, muscle power for knee extension and flexion, visual analog scale (VAS) for pain in walking, and necessity of canes in walking were also assessed at one year after the surgery. Multivariate correlation analysis was performed for each parameter. Speaman rank correlation coefficient revealed that preoperative BBS was significantly correlated with the time needed for 10m walking (ρ=0.66, p<0.001). Logistic regression analysis also revealed that preoperative BBS is also correlated with the necessity for canes in walking one year after the surgery. The cut-off value of preoperative BBS for the necessity of canes in walking by ROC curve analysis was 48 points with 79% in sensitivity and 80% in specificity. The muscle powers were also weakly correlated with the walking ability at one year after the surgery, but VAS for pain was not. The study indicated that preoperative physical balance could predict the ability of walking one year after TKA regardless of the reduction of pain. It is suggested that surgery should be recommended before the physical balance function deteriorates to achieve the better walking ability after the TKA


M. Karia S. Vishnu-Mohan O. Boughton E. Auvinet R. Wozencroft S. Clarke C. Halewood J. Cobb

Aims

Accurate and precise acetabular reaming is a requirement for the press-fit stability of cementless acetabular hip replacement components. The accuracy of reaming depends on the reamer, the reaming technique and the bone quality. Conventional reamers wear with use resulting in inaccurate reaming diameters, whilst the theoretical beneficial effect of ‘whirlwind’ reaming over straight reaming has not previously been documented. Our aim was to compare the accuracy and precision of single use additively-manufactured reamers with new conventional reamers and to compare the effect of different acetabular reaming techniques.

Materials and Methods

Forty composite bone models, half high-density and half low-density, were reamed with a new 61 mm conventional acetabular reamer using either straight or ‘whirlwind’ reaming techniques. This was repeated with a 61 mm single use additively-manufactured reamer. Reamed cavities were scanned using a 3D laser scanner with mean diameters of reamed cavities compared using the Mann-Whitney U test to determine any statistically significant differences between groups (p<0.05) [Fig. 1).


M. Karia A. Ali S. Harris R. Abel J. Cobb

Background

Defining optimal coronal alignment in Total Knee Replacement (TKR) is a controversial and poorly understood subject. Tibial bone density may affect implant stability and functional outcomes following TKR. Our aim was to compare the bone density profile at the implant-tibia interface following TKR in mechanical versus kinematic alignment.

Methods

Pre-operative CT scans for 10 patients undergoing medial unicompartmental knee arthroplasty were obtained. Using surgical planning software, tibial cuts were made for TKR with 7 degrees posterior slope and either neutral (mechanical) or 3 degrees varus (kinematic) alignment. Signal intensity, in Hounsfield Units (HU), was measured at 25,600 points throughout an axial slice at the implant-tibia interface and density profiles compared along defined radial axes from the centre of the tibia towards the cortices (Hotelling's t-squared and paired t-test).


E. Sanchez C. Schilling T. M. Grupp N. Verdonschot D. Janssen

Introduction

Although cementless press-fit femoral total knee arthroplasty (TKA) components are routinely used in clinical practice, the effect of the interference fit on primary stability is still not well understood. Intuitively, one would expect that a thicker coating and a higher surface roughness lead to a superior fixation. However, during implant insertion, a thicker coating can introduce more damage to the underlying bone, which could adversely influence the primary fixation. Therefore, in the current study, the effect of coating thickness and roughness on primary stability was investigated by measuring the micromotions at the bone-implant interface with experimental testing.

Methods

A previous experimental set-up was used to test 6 pairs of human cadaveric femurs (47–60 years, 5 females) implanted with two femoral component designs with either the standard e.motion (Total Knee System, B. Braun, Germany) interference fit of 350 µm (right femurs) or a novel, thicker interference fit of 700 µm (left femurs). The specimens were placed in a MTS machine (Figure 1) and subjected to the peak loads of normal gait (1960N) and squat (1935N), based on the Orthoload dataset for Average 75.

Varus/valgus moments were incorporated by applying the loads at an offset relative to the center of the implants, leading to a physiological mediolateral load distribution. Under these loads, micromotions at the implant-bone interface were measured using Digital Image Correlation (DIC) at different regions of interest (ROIs – Figure 1). In addition, DIC was used to measure opening and closing of the implant-bone interface in the same ROIs.


S. Lal R. Hall J. Tipper

Currently, different techniques to evaluate the biocompatibility of orthopaedic materials, including two-dimensional (2D) cell culture for metal/ceramic wear debris and floating 2D surfaces or three-dimensional (3D) agarose gels for UHMWPE wear debris, are used. Moreover, cell culture systems evaluate the biological responses of cells to a biomaterial as the combined effect of both particles and ions. We have developed a novel cell culture system suitable for testing the all three type of particles and ions, separately. The method was tested by evaluating the biological responses of human peripheral blood mononuclear cells (PBMNCs) to UHMWPE, cobalt-chromium alloy (CoCr), and Ti64 alloy wear particles.

Methods

Clinically relevant sterile UHMWPE, CoCr, and Ti64 wear particles were generated in a pin-on-plate wear simulator. Whole peripheral blood was collected from healthy human donors (ethics approval BIOSCI 10–108, University of Leeds). The PBMNCs were isolated using Lymphoprep (Stemcell, UK) and seeded into the wells of 96-well and 384-well cell culture plates. The plates were then incubated for 24 h in 5% (v/v) CO2 at 37°C to allow the attachment of mononuclear phagocytes.

Adherent phagocytes were incubated with UHMWPE and CoCr wear debris at volumetric concentrations of 0.5 to 100 µm3 particles per cell for 24 h in 5% (v/v) CO2 at 37°C. During the incubation of cells with particles, for each assay, two identical plates were set up in two configurations (one upright and one inverted). After incubation, cell viability was measured using the ATPlite assay (Perkin Elmer, UK). Intracellular oxidative stress was measured using the DCFDA-based reactive oxygen species detection assay (Abcam, UK). TNF-α cytokine was measured using sandwich ELISA. DNA damage was measured by alkaline comet assay. The results were expressed as mean ± 95% confidence limits and the data was analysed using one-way ANOVA and Tukey-Kramer post-hoc analysis.

Results and Discussion

Cellular uptake of UHMWPE, CoCr and Ti64 particles was confirmed by optical microscopy. PBMNCs incubated with UHMWPE particles did not show any adverse responses except the release of significant levels of TNF-α cytokine at 100 µm3 particles per cell, when in contact with particles. PBMNCs incubated with CoCr wear particles showed adverse responses at high particle doses (100 µm3 particles per cell) for all the assays. Moreover, cytotoxicity was observed to be a combined effect of both particles and ions, whereas oxidative stress and DNA damage were mostly caused by ions. Ti64 wear particles did not show any adverse responses except cytotoxicity at high particle doses (100 µm3 particles per cell). Moreover, this cytotoxicity was mostly found to be a particle effect. In conclusion, the novel cell culture system is suitable for evaluating the biological impact of orthopaedic wear particles and ions, separately.


K. Yamada K. Hoshino K. Tawada J. Inoue

Introduction

We have been re-evaluating patellofemoral alignment after total knee arthroplasty (TKA) by using a weight- bearing axial radiographic view after detecting patellar maltracking (lateral tilt > 5° or lateral subluxation > 5 mm) on standard non-weight-bearing axial radiographs. However, it is unclear whether the patellar component shape affects this evaluation method. Therefore, we compared 2 differently shaped components on weight-bearing axial radiographs.

Methods

From 2004 to 2013, 408 TKAs were performed with the same type of posterior-stabilized total knee implant at our hospital. All patellae were resurfaced with an all-polyethylene, three-pegged component to restore original thickness. Regarding patellar component type, an 8-mm domed component was used when the patella was so thin that a 10-mm bone cut could not be performed. Otherwise, a 10-mm medialized patellar component was selected. Twenty-five knees of 25 patients, in whom patellar maltracking was noted on standard axial radiographs at the latest follow-up, were included in this study. Knees were divided into 2 groups: 15 knees received a medialized patella (group M) while 10 received a domed patella (group D). Weight-bearing axial radiographs with patients in the semi-squatting position were recorded with the method of Baldini et al. Patellar alignment (tilt and subluxation) was measured according to the method described by Gomes et al. using both standard and weight-bearing axial views.


S. Elhadi Q. Grimal

Introduction

The success of cementless total hip arthroplasty (THA) depends on the primary stability of the components. One of the biomechanical factors that comes into play is the mechanical quality of the bone. To our knowledge, there are no reported studies in the literature analyzing the impact of the preoperative bone mineral density on the outcomes of cementless THA. The goal of the study was to analyze the clinical results at 2 year follow-up according to the preoperative cancellous bone mineral density (BD). Our hypothesis was that the clinical outcomes were correlated to the BD.

Material and methods

From January to June 2013, a prospective study included patients who underwent a cementless THA using a proximally shortly fixed anatomic stem. A 3D preoperative CTscan-based planning was performed according to the routine protocol using the Hip-Plan software in order to determine the hip reconstruction goals as well as the implants size and position. The Hounsfield bone density (BD) of the metaphyseal cancellous bone was computed in a volume (of 1 mm thick and of 1cm² surface) at the level of the calcar 10 mm above the top of the lesser trochanter and laterally to the medial cortical (Figure 1). Intra-and inter-observer repeatability measurements were performed. Patients were clinically assessed at 2 years follow-up using self-administered auto-questionnaires corresponding to the Harris and the Oxford scores. A Multivariate statistical analysis assessed correlations between clinical scores, age, gender, body mass index, and BD.


K. Behzadi

Taper corrosion and Trunionnosis are recognized as a major complication of hip replacement surgery presenting in a variety of clinical manifestations commonly referred to as Adverse Local Tissue Reactions. Metal debris is produced through Mechanically Assisted Crevice Corrosion with several implicating factors including mixed alloy components, taper design, head offset, femoral head size, and taper impaction techniques (including magnitude of force, control of alignment and environmental factors). Our project has focused singularly on taper impaction techniques and surgeon controlled factors, as we believe the process of head impaction unto a trunnion is non-standardized, which often times dooms the trunionn to failure. We have contemplated a standardization process, such that given the right tool, the surgeon can control the quality of the taper interlock, which may produce a “cold weld” or perfect taper interlock, eliminate micro motion, mechanically assisted crevice corrosion, and trunionnosis. We have considered four specific problems with current head to trunionn impaction techniques: 1. The magnitude of applied force is uncontrolled, haphazard, and non-standardized. 2. Non-axial application of force is the norm, which produces canting, leading to micro-motion and tribocorrosion. 3. The transfer of energy from the head to the trunionn interface is highly inefficient, such that the energy produced by the surgeon is mostly dissipated in a non-constrained system. 4. No in vitro studies exist to guide surgeons as to the magnitude of force required for a proper interlock.

Regardless of the design, including taper angles, larger heads, offset heads, mixed alloy components, shorter and slimmer trunionns there is a widespread problem with the process of head impaction onto the trunionn and the engagement of the modular taper interface that dooms the trunionn interface to failure. The deficiencies noted in current techniques are addressed with a simple tool and minor modification of the femoral stem. We present a new concept/apparatus for head to trunionn taper assembly that fully controls the magnitude and direction of assembly force within a constrained, dry and contaminant free environment. This tool allows application of a perfectly axial and high insertional forces without risk of damage to the femoral stem/bone interface to obtain a cold weld and perfect taper interlock with no chance for canting, micro motion and tribocorrosion. The concept has been verified through several prototypes and can be adopted in order to standardize the process of taper assembly, making this procedure independent of surgeon skill and strength, and minimizing the incidence of trunionnosis.


K. Tamura M. Takao H. Hamada T. Sakai N. Sugano

Introduction

Most of patients with unilateral hip disease shows muscle volume atrophy of pelvis and thigh in the affected side because of pain and disuse, resulting in reduced muscle weakness and limping. However, it is unclear how the muscle atrophy correlated with muscle strength in the patient with hip disorders. A previous study have demonstrated that the volume of the gluteus medius correlated with the muscle strength by volumetric measurement using 3 dimensional computed tomography (3D-CT) data, however, muscles influence each other during motions and there is no reports focusing on the relationship between some major muscles of pelvis and thigh including gluteus maximus, gluteus medius, iliopsoas and quadriceps and muscle strength in several hip and knee motions. Therefore, the purpose of the present study is to evaluate the relationship between muscle volumetric atrophy of major muscles of pelvis and thigh and muscle strength in flexion, extension and abduction of hip joints and extension of knee joint before surgery in patients with unilateral hip disease.

Material and Methods

The subjects were 38 patients with unilateral hip osteoarthritis, who underwent hip joint surgery. They all underwent preoperative computed tomography (CT) for preoperative planning. There were 6 males and 32 females with average age 59.5 years old.

Before surgery, isometric muscle strength in hip flexion, hip extension, hip abduction and knee extension were measured using a hand held dynamometer (µTas F-1, ANIMA Japan).

Major muscles including gluteus maximus, gluteus medius, iliopsoas and quadriceps were automatically extracted from the preoperative CT using convolutional neural networks (CNN) and were corrected manually by the experienced surgeon.

The muscle volumetric atrophy ratio was defined as the ratio of muscle volume of the affected side to that of the unaffected side. The muscle weakness ratio was defined as the ratio of muscle strength of the affected side to that of the unaffected side.

The correlation coefficient between the muscle atrophy ratio and the muscle weakness ratio of each muscle were calculated.


H. Kijima K. Tateda S. Yamada S. Nagoya M. Fujii I. Kosukegawa N. Miyakoshi Y. Shimada

Purpose

Various approaches have been reported for the total hip replacement (THR). In recent years, a muscle sparing approach with low postoperative muscle weakness and low dislocation risk has been frequently selected. However, such surgery has a learning curve. Thus, at the time of switching from the conventional approach to such approaches, invasion or infection risk may increase with the operation time extension. The purpose of this study is to clarify the change of invasiveness or latent infection rate with the change in approach in order to select the cases safely at the beginning of introducing a new approach in THR.

Methods

In facility A, THR was performed with Dall's approach (Dall), but 1 surgeon changed Dall to anterolateral modified Watson-Jones approach (OCM) and another surgeon changed Dall to direct anterior approach (DAA). In facility B, all 3 surgeons changed posterolateral (PL) approach to OCM. The subjects are 150 cases in total, including the each last 25 cases operated with the conventional approach and the each first 25 cases operated with a new approach (Dall to OCM: 25 + 25, Dall to DAA: 25 + 25, PL to OCM: 25 +25 cases). And, differences in operative time, intraoperative bleeding volume, postoperative hospital stay, and postoperative hemoglobin, white blood cell count, lymphocyte count, creatine kinase (CK), C-reactive protein (CRP) were investigated.


H. J. Lo

INTRODUCTION

The elimination of motion and disc stress produced by spinal fusion may have potential consequences beyond the index level overloading the spinal motion segments and leading to the appearance of degenerative changes. So the “topping-off” technique is a new concept instructing dynamic fixation such as interspinous process device (IPD) for the purpose of avoiding adjacent segment disease (ASD) proximal to the fusion construct.

MATERIALS AND METHODS

The study simulated spinal fusion in L4-L5, fusion combined DIAM in L3-L4. The ROM and maximum von Miss stresses were analyzed in flexion, extension, lateral bending, and torsion in response to hybrid method, compared to intact modeland fusion model.


N. Taki N. Mitsugi Y. Mochida Y. Yukizawa Y. Sasaki S. Takagawa

INTRODUCTION

Recently, short shaped stem becomes popular in total hip arthroplasty (THA). Advantages of the short stem are preserving femoral bone stock, thought to be less thigh pain, suitable for minimally invasive THA. However, bony reaction around the short stem has not been well known. The purpose of this study was to compare the two years difference of radiographic change around the standard tapered round stem with the shorter tapered round stem.

MATERIALS AND METHODS

Evaluation was performed in 96 patients (100 joints) who underwent primary THA. Standard tapered round stem (Bicontact D stem) was used in 44 patients from January 2011 to May 2013. Shorter stem (Bicontact E stem) was used in 56 patients from May 2015 to March 2016. The proximal shapes of these two stems are almost the same curvature. The mean age at surgery was 64 years. The mean BMI at surgery was 24.0 kg/m2. Eighty-six patients had osteoarthrosis and 10 patients had osteonecrosis. Evaluation was performed 2 years after surgery with standard AP radiographs. The OrthoPilot imageless navigation system was used during surgery. Evaluation of the stem fixation, stress shielding, and cortical hypertrophy were carried out.


I. Adekanmbi Z. Ehteshami C. Hunt M. Dressler

Introduction

In cementless THA the incidence of intraoperative fracture has been reported to be as high 28% [1]. To mitigate these surgical complications, investigators have explored vibro-acoustic techniques for identifying fracture [2–5]. These methods, however, must be simple, efficient, and robust as well as integrate with workflow and sterility. Early work suggests an energy-based method using inexpensive sensors can detect fracture and appears robust to variability in striking conditions [4–5]. The orthopaedic community is also considering powered impaction as another way to minimize the risk of fracture [6– 8], yet the authors are unaware of attempts to provide sensor feedback perhaps due to challenges from the noise and vibrations generated during powered impaction. Therefore, this study tests the hypothesis that vibration frequency analysis from an accelerometer mounted on a powered impactor coupled to a seated femoral broach can be used to distinguish between intact and fractured bone states.

Methods

Two femoral Sawbones (Sawbones AB Europe, SKU 1121) were prepared using standard surgical technique up to a size 4 broach (Summit, Depuy Synthes). One sawbone remained intact, while a calcar fracture approximately 40mm in length was introduced into the other sawbone. Broaching was performed with a commercially available pneumatic broaching system (Woodpecker) for approximately 4 secs per test (40 impactions/sec) with hand-held support. Tests were repeated 3 times for fractured and intact groups as well as a ‘control’ condition with the broach handle in mid-air (ie not inserted into the sawbone).

Two accelerometers (PCB M353B18) positioned on the femoral condyle and the Woodpecker impactor captured vibration data from bone-broach-impactor system (Fig1).

Frequency analysis from impaction strikes were postprocessed (Labview). A spectrogram and area under FFT (AUFFT) [4] were analysed for comparisons between fractured and intact bone groups using a nested ANOVA.


L. Lage

Orthopaedic implants, such as femoral heads, sockets and stems, are manufactured with a high degree of smoothness and very low form error in order to function as low wear bearings. The surfaces are subject to both wear and damage during in vivo use. Articulating surfaces naturally wear during normal use. Aseptic loosening associated with osteolysis and release of wear particles is the main reason for revision of total hip arthroplasty (THA). Damage of femoral heads is well known to increase the wear rate at the articulating surface and is vulnerable to scratching during the maneuver of positioning the femoral component into the acetabulum component either in primary as in revision total hip arthroplasties. The findings emphasize the importance of achieving and maintaining good surface finish of the femoral head component.

The author presents a very simple and “zero cost” method of preventing scratching of the femoral head of any kind of total hip prosthesis (ceramic on ceramic, ceramic on poly, metal on metal, metal on poly and even metal on ceramic) when the reduction of the femoral head prosthesis is done inside the new acetabular component with metal, ceramic liner or poly liner with metal back (where the scratching can also occur) as one of the final stages of the surgical procedure which can be crucial to the long survival of the hip prosthesis.

A short one minute video on an e-poster will show how this can be done being an easy, reproducible, safe and reliable technique to prevent femoral head scratching.


A. Martusiewicz R. Harold D. Delagrammaticas M. Beal D. Manning

Introduction

Direct anterior approach (DAA) total hip arthroplasty (THA) has been reported to improve early outcomes as compared to posterior approach THA up to 6 weeks post-operatively. However, very few detailed results have been reported within the first 6 weeks. In this study we investigate the effect of surgical approach on THA outcome via weekly assessment.

Methods

Patients undergoing THA for primary osteoarthritis were prospectively enrolled. Data was collected pre-operatively and post-operatively at weekly intervals for 6 weeks. Outcome scores and additional functional measures were compared using unpaired t-test, effect size, and Pearson correlation coefficients.


T. Seki K. Seki A. Tokushige T. Imagama H. Ogasa

Introduction

It has been reported that the tibial articular surface of coronal aligment is parallel to the floor in the whole-leg standing radiographs of the normal knee. The purposes of this study are to investigate the relationship between the tibial articular surface and the ground on the whole-leg standing radiographs after total knee arthroplasty(TKA).

Sturdy Design and Methods

20 knees after TKA were studied retrospectively. The 20 participants were mean age at 76.7 years; and 3 male and 17 female. Using whole-leg standing radiographs, we mesuared the pre- and postoperative hip-knee- ankle angle(HKA), the tibial joint line angle(TJLA), and the tibial component Coronal tibial angle(CTA). The difference in each parameter was compared and examined.


R. Harold D. Delagrammaticas M. Stover D. W. Manning

Background

Supine positioning during direct anterior approach total hip arthroplasty (DAA THA) facilitates use of fluoroscopy, which has been shown to improve acetabular component positioning on plane radiograph. This study aims to compare 2- dimensional intraoperative radiographic measurements of acetabular component position with RadLink to postoperative 3- dimensional SterEOS measurements.

Methods

Intraoperative fluoroscopy and RadLink (El Segundo, CA) were used to measure acetabular cup position intraoperatively in 48 patients undergoing DAA THA. Cup position was measured on 6-week postoperative standing EOS images using 3D SterEOS software and compared to RadLink findings using Student's t-test. Safe-zone outliers were identified. We evaluated for measurement difference of > +/− 5 degrees.


S. Nambu D. Chang

Objective

Clinical wear depends on several factors such as implant specific factors (material, design, and sterilization), surgical factors/techniques, and patient-specific factors (weights and activities). The load magnitude for wear testing in the standard protocols (i.e., 2 kN as per ASTM F1714 or 3 kN as per ISO 14243-3) represent an average patient weight and does not address the other “what-if”’ scenarios (i.e., wear vs. patient weights, activities, duration, etc.,). The results from in-vitro testing report the data in wear (mg) or wear rate (mg/Mc) and are only applicable to the parameters (i.e., loads, bearing diameter, thickness, etc.,) used for the testing and not suitable to the variations seen in clinical scenarios. Therefore, it is essential to present the wear summary that can normalize the parameters and which is relevant in both in-vitro and in-vivo conditions. The goal of the current study is an attempt to present wear as a parameter (i.e., wear factor that combines the wear test data and established- theoretical relationship) and is thus applicable in both in-vivo and in-vitro scenarios.

Methods

Wear factor was first evaluated using actual wear testing conducted on metal on cross-linked polyethylene bearings along with well-established Dowson's wall bridge equation.

As per Dowson-Wallbridge, volumetric wear is V=2.376·KNWR+C or K=V/(2.376·NWR) where V is the volumetric wear in mm3, K is the wear factor in mm3/Nmm, N is the number of cycles, W is the load in Newtons, R is the bearing radius in mm, and C is the creep (assumed to be negligible, i.e., C=0 in this model.

28 mm simulator wear was first used to evaluate wear factor, but since simulator wear presented as a mass loss, these results were converted to volumetric wear using the equation

V = m / ρ ,

(m is the wear in mg and r is the density of XLPE in mg/mm3 (=0.923).

The Dowson-Wallbridge equation was then validated for predictive accuracy against actual wear testing on the predecessor THR system. The wear factor thus obtained was used to compute the theoretical-wear for other sizes (i.e., 42 and 46 mm bearings). The theoretical-wear was then compared to simulator wear for predictive accuracy.


E. Wakelin W. Walter J. Bare W. Theodore J. Twiggs B. Miles

Introduction

Kinematics post-TKA are complex; component alignment, component geometry and the patient specific musculoskeletal environment contribute towards the kinematic and kinetic outcomes of TKA. Tibial rotation in particular is largely uncontrolled during TKA and affects both tibiofemoral and patellofemoral kinematics. Given the complex nature of post- TKA kinematics, this study sought to characterize the contribution of tibial tray rotation to kinematic outcome variability across three separate knee geometries in a simulated framework.

Method

Five 50th percentile knees were selected from a database of planned TKAs produced as part of a pre-operative dynamic planning system. Virtual surgery was performed using Stryker (Kalamazoo, MI) Triathlon CR and PS and MatOrtho (Leatherhead, UK) SAIPH knee medially stabilised (MS) components. All components were initially planned in mechanical alignment, with the femoral component neutral to the surgical TEA. Each knee was simulated through a deep knee bend, and the kinematics extracted. The tibial tray rotational alignment was then rotated internally and externally by 5° & 10°.

The computational model simulates a patient specific deep knee bend and has been validated against a cadaveric Oxford Knee Rig. Preoperative CT imaging was obtained, landmarking to identify all patient specific axes and ligament attachment sites was performed by pairs of trained biomedical engineers. Ethics for this study is covered by Bellberry Human Research Ethics Committee application number 2012-03-710.


N. Abe K. Makiyama K. Tanaka H. Date

Background

Total knee arthroplasty (TKA) is an effective surgical procedure to alleviate excruciating pain and correct dysfunction due to severe knee deformity. The satisfaction rate with current TKA is 80%, While 20% of the patients report uncomfortable feeling during stair descending and deeply knee bending.

Preserving the ligaments might allow a restoration close to the natural function, although sacrifice of the ACL is common with the conventional TKA technique. The current bicruciate-retaining (BCR) TKA would be a way to go concerning this issue. This study aimed at evaluating the intraoperative kinematics and joint laxity on BCR TKA if the native function would be replicated and thus assessing the range of motion (ROM) at final followup.

Methods

BCR TKAs were performed in 22 knees (12 women, 10 men, average aged 67.2-year-old) with image-free navigation system (KolibliTM) under general anesthesia. The intraoperative kinematics was evaluated about flexion extension gap (FEG), anterior-posterior translation (APT, bi-condylar rollback) and axial rotation (AR, medial pivot) with passive motion. These kinematic patterns were assessed with the post-operative ROM.


W. Murphy P. Lane B. Lin T. Cheng D. Terry S. Murphy

INTRODUCTION

In the United States, the Centers for Medicare and Medicaid Services consider rates of unplanned hospital readmissions to be indicators of provider quality. Understanding the common reasons for readmission following total joint arthroplasty will allow for improved standards of care and better outcomes for patients. The current study seeks to evaluate the rates, reasons, and Medicare costs for readmission after total hip and total knee arthroplasty.

METHODS

This study used the Limited Data Set (LDS) from the Centers for Medicare and Medicaid Services (CMS) to identify all primary, elective Total Knee Arthroplasties (TKA) and Total Hip Arthroplasties (THA) performed from January 2013 through June 2016. The data were limited to Diagnosis-Related Group (DRG) 470, which is comprised of major joint replacements without major complications or comorbidities. Readmissions were classified by corresponding DRG. Readmission rates, causes, and associated Medicare Part A payments were aggregated over a ninety-day post-discharge period for 804,448 TKA and 409,844 THA.


I. Nizam A. Batra

BACKGROUND

We conducted this study to determine if the pre-surgical patient specific instrumented planning based on Computed tomography scans can accurately predict each of the femoral and tibial resections. The technique helps in optimization of component positioning and hence overall alignment thereby reducing errors. This makes it less invasive, more efficient and cost effective. The surgical plan in combination with the cutting guides determine the resection thickness, component size, femoral rotation and femoral and tibial component alignment. Several clinical studies have shown that PSI is safe, accurate and reproducible in primary TKA. Accurate preparation of the femoral and tibial surfaces will determine alignment and component positioning and this in turn reflects on function and longevity

METHODS

The study was conducted prospectively between May 2016 and December 2017 in our institution. Patients admitted over a period of these twenty months were included in the study. Patients with primary or secondary osteoarthritis (OA) and inflammatory arthritis who were suitable to undergo patient-specific TKA were included in the study. Patients with conventional instrumented TKR and those with significant deformities requiring constrain including valgus or varus of greater than 20 degrees with incompetent lateral or medial collateral ligaments were excluded from the study along with revisions of partial knee to TKA using PSI blocks.

Prophecy® Preoperative Navigation 3D printed Guides were used for the Evolution Medial Pivot knee replacement system (Microport Orthopaedics (Arlington, TN 38002, USA)) in all cases. The operating surgeon measured all the resections made (4 femoral and 2 tibial) using vernier calipers intraoperatively. These measurements were then compared with the preoperative CT predicted bone resection surgical planning.

The senior author (IN) also designed markings on the tibial cutting blocks to improve accurate placement on the tibia and further markings on the femoral cutting blocks to ensure accurate positioning and rotational alignment improving accuracy of the cuts and femoral rotation. Further markings by senior surgeon (IN) on the pre-operative plans included tibial rotational plans in relation to the tibial tubercle.


T. Paszicsnyek C. Stiegler

Introduction

Sensoric soft tissue balancing in performing TKA is an upcoming topic to improve the results in TKA. A well balanced knee is working more proper together with the muscular stabilizing structures.

Dynamic ligament balancing (DLB)R give us the opportunity to check the balance of the ligaments at the beginning and the end of the surgery before implanting the definitive prosthesis. It is a platform independent, single-use device, which can be combined with all common types of knee prosthesis.

Materials and Methods

DLBR consists of a set of 10 different sizes of baseplates including a spring coil of 20N (A). Connected to a tablet all datas can be shown during surgery and stored for patient security. During the surgery the tibial cut is performed first, rectangular to the longitudinal axis respecting the right slope. A navigation system is recommended to ensure this request. Measurement before femoral cuts are performed and give an information about distance between tibial plate and femoral condyles, joint angle and calculated contact pressure. The femoral cuts can be performed with the original cutting block.

After positioning the femoral trial, testing is repeated and should show a balanced situation over all the ROM. The overall period datas were stored and compared to the subjective feeling of the patients.


S. Abe H. Nochi H. Ito

INTRODUCION

Appropriate soft tissue balance is an important factor for postoperative function and long survival of total knee arthroplasty(TKA). Soft tissue balance is affected by ligament release, osteophyte removal, order of soft tissue release, cutting angle of tibial surface and rotational alignment of femoral components. The purpose of this study is to know the characteristics of soft tissue balance in ACL deficient osteoarthritis(OA) knee and warning points during procedures for TKA.

METHODS

We evaluated 139 knees, underwent TKA (NexGen LPS-Flex, fixed surface, Zimmer) by one surgeon (S.A.) for OA. All procedures were performed through a medial parapatellar approach. There were 49 ACL deficient knees. A balanced gap technique was used in 26 ACL deficient knees, and anatomical measured technique based on pre-operative CT was used in 23 ACL deficient knees. To compare flexion-extension gaps and medial- lateral balance during operations between the two techniques, we measured each using an original two paddles tensor (figure 1) at 20lb, 30lb and 40lb, for each knee at a 0 degree extension and 90 degree flexion. We measured bone gaps after removal of all osteophytes and cutting of the tibial surface, then we measured component gaps after insertion of femoral components. Statistical analysis was performed by t-test with significant difference defined as P<0.05.


T. Sugita T. Aizawa N. Miyatake S. Miyamoto A. Sasaki I. Maeda T. Honma M. Kamimura A. Takahashi

Introduction

Patient self-reported outcome scales have recently been used to evaluate total knee arthroplasty (TKA) outcomes. Many follow-up studies have been conducted on patients undergoing TKA; however, they have mostly reported outcomes after unilateral TKA. We believe that a longitudinal study after bilateral TKA will be more useful in evaluating the quality of life (QOL) of such patients.

Objectives

The objective of this study was to longitudinally evaluate QOL using the Japanese Knee Osteoarthritis Measure (JKOM). Objective outcomes were assessed using the Knee Society Score (KSS) and the Timed Up and Go test (TUG) for more than 5 years after bilateral TKA. Furthermore, QOL and objective outcomes were compared between younger (age ≤ 80 years at the final follow-up point) and older (age > 80 years) age groups.


W. Frankel S. Navarro H. Haeberle M. Mont P. Ramkumar

BACKGROUND

High-volume surgeons and hospital systems have been shown to deliver higher value care in several studies. However, no evidence-based volume thresholds for cost currently exist in total hip arthroplasty (THA). The objective of this study was to establish clinically meaningful volume thresholds based on cost for surgeons and hospitals performing THA. A secondary objective was to analyze the relative market share of THAs among the newly defined surgeon and hospital volume strata.

METHODS

Using 136,501 patients from the New York State Department of Health's SPARCS database undergoing total hip arthroplasty, we used stratum-specific likelihood ratio (SSLR) analysis of a receiver operating characteristic (ROC) curve to generate volume thresholds predictive of increased costs for both surgeons and hospitals. Additionally, we examined the relative proportion of annual THA cases performed by each of these surgeon and hospital volume strata we had established.


S. Londhe R. Shah

INTRODUCTION

This study is to determine the response of CRP after TKR surgery, both unilateral and simultaneous bilateral TKR. According to the previously published literature from North America and Europe CRP value peaks on the 1st and 2nd post-operative day and then gradually comes down to normal by 6–8 weeks post-operatively.

AIM

To determine the trend of CRP in Indian patients undergoing TKR, both unilateral and simultaneous bilateral TKR. To see whether it follows the trend in North American and European population and to determine whether there is a difference in the CPR pattern in unilateral versus simultaneous bilateral TKR patients.


S. Londhe R. Shah A. Ranade

Introduction

Forgotten knee is the terminology which is used to describe a post TKR patient who is completely unaware of his knee implant. Various factors like age, sex, BMI, pre operative pain, pre operative patella symptoms have been studied to see their cause effect relationship on the achievement of forgotten knee status by the patient. All the published data till to date shows no relationship between thetwo

Aim

To determine whether pre operative DM negatively influence the achievement of forgotten knee status post TKR.


S. Londhe R. Shah

OBJECTIVE

Post TKR manipulation under anesthesia is required when post operatively patients don't achieve desired range of motion. The rates quoted in various western literature ranges from 1 to 2 %. A knee is considered to be stiff when the patient fails to achieve 60 degrees of flexion. The objective of the study was to find out the differentiating factor responsible for low rate of MUA in Indian post TKR patients as compared to Anglo-Saxon population

MATERIAL & METHODS

We studied 100 consecutive patients operated from January 2016. The following parameters of these 100 patients were recorded.

Pre-op ROM

Age and Sex of the TKR patient

Duration of home physiotherapy

Post opROM

All patients received post operative physiotherapy at home every day for first 2 weeks, 3 times a week for next 2 weeks and then once a week for next two weeks. The implant used was Maxx Freedom knee (PS design).